Home > MECHANICS TOOLS
Choose a sub category:
PLIERS - SLIP JOINT PLIERS - GROOVE JOINT PLIERS - LOCKING
PLIERS - LONGNOSE PLIERS - SNAP RING PLIERS - LINESMAN
IRONWORKER PLIERS DIAGONAL CUTTING PLIER SETS
CABLE CUTTERS BOLT CUTTERS & PARTS REBAR CUTTERS / BENDERS
NIPPERS FENCE TOOLS SNIPS - TINNERS
SNIPS - AVIATION SHOP SCISSORS / SHEARS WRENCHES - ADJUSTABLE
PIPE WRENCHES HEX KEYS - SAE HEX KEY SETS
HEX KEY SETS - FOLDING INSPECTION AND PICKUP TOOLS MAGNETS & MAGNITIZERS
SPECIALTY MECHANICS TOOLS MISC PLIERS & CUTTERS
Sort By:
1
Eklind 15104 Hex L-Key Eklind 15106 Hex L-Key Eklind 15108 Hex L-Key
Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish.
Eklind 15208 Hex L-Key Eklind 15112 Hex L-Key Eklind 15210 Hex L-Key
Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish.
Eklind 15120 Hex L-Key Master Magnetics 07010 Flexible Magnetic Strip With Adhesive Liner Master Magnetics 07011 Flexible Magnetic Tape
Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Used for making lightweight craft projects magnetic; 2"W x 3"L x.06T sheet, scored into twelve flexible.5" x 1" rectangles with adhesive on one side and magnetism on the other. Flexible magnetic tape is adhesive on one side, magnetic on the other. Perfect for making lightweight projects magnetic. Can be used in the home, school and office.
Eklind 15124 Hex L-Key Master Magnetics 07005 Magnetic Ring Eklind Torx 69207 Short Arm Hex Key Set With Plastic Ring
Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Made from the highest grade of ceramic magnet material available. Attach to photo frames, calendars, schedules and more to display on ferrous metal surfaces; used by crafters and teachers. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes inch sizes: 5/64, 3/32, 1/8 , 5/32, 3/16, 7/32, 1/4, and vinyl pouch. Carded.
Master Magnetics 07001 Magnetic Block Master Magnetics 07003 Magnet Disc Master Magnetics 07004 Magnet Disc
Also known as ferrite magnets they are made from highest grade of ceramic magnet material available, giving them amazing pull strength. Used by crafters and teachers to attach to photo frames, calendars, schedules and more to display on ferrous metal surfaces. Ceramic disc magnets also known as ferrite magnets. Used for holding and hanging objects on metal walls, beams and doors. Good for hot gluing to medium sized projects to make them magnetic. Ceramic disc magnets also known as ferrite magnets. Used for holding and hanging objects on metal walls, beams and doors. Good for hot gluing to medium sized projects to make them magnetic.
Master Magnetics 07043 Magnetic Block Master Magnetics 07216 Round Magnetic Base Master Magnetics 07044 Magnetic Block
Also known as ferrite magnets they are made from highest grade of ceramic magnet material available, giving them amazing pull strength. Used by crafters and teachers to attach to photo frames, calendars, schedules and more to display on ferrous metal surfaces. Add a hook or a knob and use this magnet for holding and positioning shop lights, tools, plants and more to steel surfaces such as refrigerators, filing cabinets, metal beams, walls and doors. Also known as ferrite magnets they are made from highest grade of ceramic magnet material available, giving them amazing pull strength. Used by crafters and teachers to attach to photo frames, calendars, schedules and more to display on ferrous metal surfaces.
Master Magnetics 07002 Magnet Disc Master Magnetics 07014 Flexible Magnetic Sheet With Adhesive Liner Eklind 51606 Hex T-Key
Ceramic disc magnets also known as ferrite magnets. Used for holding and hanging objects on metal walls, beams and doors. Good for hot gluing to medium sized projects to make them magnetic. Flexible magnetic sheeting with adhesive holds decorations like colored sand, fabric, lace, colored paper and much more. Cuts easily with scissors. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches.
MAGNET DISK 1/2INX3/16IN0     MAGNET DISK 1INX5/32IN        Eklind 51608 Hex T-Key
National Hardware Disc Magnet, Series: N302, 1/2 in Diameter, 3/16 in Width, Ceramic 5 National Hardware Disc Magnet, Series: N302, 1 in Diameter, 5/32 in Width, Ceramic 5 Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches.
Eklind 15224 Hex L-Key Eklind 51607 Hex T-Key Master Magnetics 07224 Screwdriver Demagnetizer
Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches. Quickly and easily magnetize small tools so they attract screws or nuts for easy starting and removing. Insert a screwdriver or nutdriver into the hole, pull it out and it?s magnetized. Used by do-it-yourselfers, mechanics and electricians.
Eklind 51609 Hex T-Key Master Magnetics 07053 Flexible Magnetic Tape Eklind 51610 Hex T-Key
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches. Flexible magnetic tape is adhesive on one side, magnetic on the other. Perfect for making lightweight projects magnetic. Can be used in the home, school and office. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches.
Master Magnetics 7218 Magnetic Handy Hook Master Magnetics 7219 Magnetic Handy Clip Eklind Torx 69205 Short Arm Hex Key Set With Plastic Ring
Unlimited use in shop, store and home; use to hang small spotlight, signs, keys, utensils, draperies and more from any ferrous metal surface. Includes a special liner to prevent surface scratches. Use on file cabinets, lockers, refrigerators, desks and more. Strong enough to keep those important lists, memos and letters from sliding out of sight. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes metric sizes: 2MM, 2.5MM, 3MM, 4MM, 5MM, 6MM, 8MM and vinyl pouch. Carded.
Master Magnetics 07217 Round Magnetic Base Master Magnetics 07291 Magnetic Hook Mintcraft Pro JL-NP018  Mini Diagonal Cutting Pliers
Add a hook or a knob and use this magnet for holding and positioning shop lights, tools, plants and more to steel surfaces such as refrigerators, filing cabinets, metal beams, walls and doors. Master Magnetics Magnetic Hook, 1-1/2 in Diameter, 14 lb, 7/8 in Projection, 2 Hooks, Vertical Mounting, White Enamel, For Hang Lights, Keys, Wiring Tools, Banners and Decorations Drop forged high carbon steel; fully polished finish resists rust and corrosion; hardened and tempered sharp cutting edges; non-slip vinyl comfort grips; hardness meets or exceeds ANSI standards.
Eklind 51612 Hex T-Key Wilmar W9101 Magnetic Pick Up Tool Eklind 10107 L Handle Short Arm Hex Key Set
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches. Wilmar Magnetic Pick Up Tool, 8 lb Load Capacity Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes inch sizes: 5/64, 3/32, 1/8 , 5/32, 3/16, 7/32, and 1/4 and holder.
Master Magnetics 07012 Flexible Large Magnetic Tape Toolbasix WC917-05 Adjustable Wrenches MAGNET BLOCK 1-7/8X7/8X3/8IN
Flexible magnetic tape is adhesive on one side, magnetic on the other. Perfect for making lightweight projects magnetic. Can be used in the home, school and office. Drop forged high carbon steel; chrome plated rust resistant finish; tempered and heat treated for hardness; precisely milled jaws for grip power. National Hardware Block Magnet, Series: N302, Ceramic 5, 1-7/8 x 7/8 x 3/8 in
Master Magnetics 07046 Super Magnet Disc Master Magnetics 07047 Super Magnet Disc Master Magnetics 07045 Super Magnet Disc
Also known as rare earth magnets, these powerful permanent magnets are made of neodymium, the strongest magnet material available. Can also be used as a door latch. Used in woodworking projects, attaching name badges to clothes, science experiments. Also known as rare earth magnets, these powerful permanent magnets are made of neodymium, the strongest magnet material available. Can also be used as a door latch. Used in woodworking projects, attaching name badges to clothes, science experiments. Also known as rare earth magnets, these powerful permanent magnets are made of neodymium, the strongest magnet material available. Can also be used as a door latch. Used in woodworking projects, attaching name badges to clothes, science experiments.
Eklind 15132 Hex L-Key Eklind 51614 Hex T-Key Master Magnetics 7506 Large Magnetic Clip
Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches. Strong, plastic clip with rubber handles contains powerful neodymium magnet. Post notes, hang decorations and more.
Master Magnetics 07228 Telescopic Magnet Pointer General Tools 360 Magnetizer/Demagnetizer Master Magnetics 07505 Round Document Holding Magnet With Knob
Use as a pointer or to pick up objects in hard to reach places. Features a powerful neodymium magnet on the tip. Used to magnetize and demagnetize screwdrivers, nut drivers, wrenches, taps and small tools; converts any tool blade into a magnetic retriever for screws, nuts and metallic particles. Each magnet features easy-grip knob for positioning and non-scratch liner to prevent marring. Holds calendars, important memos, visual aides and more with these convenient, heavy duty magnetic bases; knob is 1-1/4" tall. Used in offices and classrooms.
Eklind 51616 Hex T-Key Master Magnetics 07279 Horseshoe Magnet With Keeper Eklind 20811 Fold-Up Small Hex Key Set
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches. Made primarily from aluminum, nickel, cobalt and iron;  powerful and sturdy and includes a keeper to help retain magnetic power. Used by crafters, teachers and do-it-yourselfers. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes inch sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, and 5/32. Carded.
Handy Mag 07221 Belt Clip Magnet With Belt Clip Master Magnetics 07229 Flexible Bend-It Magnet Toolbasix PC927-23 Locking Pliers
Sturdy clip easily attaches magnet to belt or pocket; used by mechanics, carpenters, electricians and do-it-yourselfers to hold small hardware, nails, screws, wire nuts and more securely and conveniently. Can be bent to reach almost any location. Use to retrieve lost items from engines, dashboards, drains and vents. Drop forged high carbon steel; nickel plated rust resistant finish; tempered and heat treated for hardness; hardened milled jaws for maximum grip power; built-in wire cutter.
Toolbasix WC917-06 Adjustable Wrenches MAGNETS 2-5/8IN               Eklind 15232 Hex L-Key
MAGNETS 2-5/8IN0
Our Price: $5.99
Drop forged high carbon steel; chrome plated rust resistant finish; tempered and heat treated for hardness; precisely milled jaws for grip power. National Hardware Magnetic Base, Series: N302, Round, 2-5/8 in Diameter, Ceramic 5 Magnet, Nylon Body Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish.
Eklind 10111 L Handle Short Arm Hex Key Set Eklind 20911 Medium Fold-Up Hex Key Set Master Magnetics 07212 Powerful Handle Magnet
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes inch sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4, and molded plastic holder. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes inch sizes: 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4. Carded. Powerful handle magnets feature solid steel construction with welded handles. Durable red powdercoat finish resists scratching. Lifts heavy objects such as shelving, beams and doors. Use to clean up scattered iron objects, such as nails, screws, bolts.
Master Magnetics 07256 Telescopic Magnetic Pickup Eklind 15105 Hex L-Key Eklind 20912 Ergonomic Fold-Up Small Hex Key Set
Contains a magnetic tip made from neodymium, the strongest magnetic material available; telescoping body with grip handle and adjustable locking hinge allows access around corners or in areas where an unusual angle is necessary for object retrieval. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes inch sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16. Carded.
Eklind 10507 L Handle Short Arm Hex Key Set Eklind 21171 Fold-Up Small Hex Key Set Master Magnetics 07502 Latch Magnet With Strike Plate
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, and molded plastic holder. Carded. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes MM sizes: 1.5, 2, 2.5, 3, 4, 5, and 6. Carded Powerful latch magnet set in durable red plastic casing with four elongated holes allows multi directional and adjustable mounting. Heavy duty door closure latch comes with 1/8" thick steel strike plate with countersunk holes to accommodate flat head screws.
Master Magnetics 07222 Round Heat Resistant Magnetic Base Master Magnetics 07225 Horseshoe Magnet With Keeper General Tools 70557 Telescoping Inspection Mirror
Add a hook or a knob and use this magnet for holding and positioning shop lights, tools, plants and more to steel surfaces such as refrigerators, filing cabinets, metal beams, walls and doors. Made primarily from aluminum, nickel, cobalt and iron;  powerful and sturdy and includes a keeper to help retain magnetic power. Used by crafters, teachers and do-it-yourselfers. General Tools Inspection Mirror, Telescoping, 2-1/4 in Diameter Mirror, Round Shape, Cushion Grip Handle, Vinyl Handle, 9-3/4 - 14-3/4 in Extendable Length, For Toolmakers, Assemblers, Inspectors and Mechanics
Master Magnetics 07509 Round Magnetic Push Pin Wiss Quickclip Contour Sharp Cutter Stanley 84-104 Fixed Joint Diagonal Cutting Plier
Powerful neodymium magnets encased in colorful plastic shapes are useful for posting memos, invoices and photos. Wiss Sharp Cutter, Contour, Heavy Duty, Series: Quickclip, 1 in Length Blade, PVC Plastic Handle, 4-3/4 in Overall Length Made of forged steel with hardened cutting edges for durability and a rust resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards.
Master Magnetics 07223 Round Base Magnet Stanley 84-096 Straight Needle Nose Plier General Tools 370-1 Horseshoe Power Magnet
Add a hook or a knob and use this magnet for holding and positioning shop lights, tools, plants and more to steel surfaces such as refrigerators, filing cabinets, metal beams, walls and doors. Made of forged steel construction with long tempered jaws for working in hard to reach areas. Rust resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards. Made primarily from aluminum, nickel, cobalt and iron;  powerful and sturdy and includes a keeper to help retain magnetic power. Used by crafters, teachers and do-it-yourselfers for retrieving small steel parts and screws from hard-to-get-at places. Carded.
Stanley 84-027 Fixed Joint Diagonal Cutting Plier Stanley 84-031W Bi-Material Long Nose Plier WRENCH ADJUST 2N1 STUBBY REV
Made of drop forged steel with 33 percent larger cutting edge 45 percent less cutting effort required. Cuts wire and other thin materials. Comfortable bi-material grip. Slip-resistant bi-material handle for a comfortable grip; drop-forged steel is strong and durable; meets ANSI specifications; fixed joint design used for bending, turning and cutting, long nose design for use in hard-to-reach areas. Jaws reverse to change functions. Adjustable wrench: straight-jaws give firm direct contact at top and bottom. Pipe wrench: serrated angles jaws allow a secure turning motion on pipes.
Toolbasix WC917-07 Adjustable Wrenches Performance Tool W9108 Stubby Adjustable Wrench General Tools 70555 Adjustable Utility Inspection Mirror
Drop forged high carbon steel; chrome plated rust resistant finish; tempered and heat treated for hardness; precisely milled jaws for grip power. Performance Tool Adjustable Wrench, Stubby, 1 in Wrench, 6 in Overall Length, Contoured Handle Mirror is fully polished for crystal clear reflections, dual ball and socket joints permit infinite angle adjustments of the mirror, convenient pocket clip for use in the field. Facilitates inspection of inaccessible work pieces and machines by tool makers, assemblers, inspectors, and mechanics; 1-3/8" diameter inspection Mirror with telescoping shaft extends from 5" to 27-1/2" in length.
General Tools 401XX Industrial Tweezer General Tools 415 Utility Tweezer General Tools 538 Lightweight Round Magnifier
General Tools Industrial Tweezer, 4-1/2 in Length, Smooth/Sharp Tip, Steel, Nickel Plated, For Electronic Assemblies, Toolmakers, Mechanics and Repairmen General Tools Utility Tweezer, 6-1/2 in Length, Smooth/Doll/Curved Tip, Stainless Steel, Nickel Plated, For Professionals, Craftspeople and Hobbyists General Tools Magnifier, Lightweight, Round, 4X Magnification Power, 2 in Lens, Plastic, For Do-It-Yourselfers, Mechanics, Laboratory, Industrial and Inspectors
General Tools 70401 LED Tweezer Master Magnetics 07019 Magnetic Tape Roll With Adhesive Backing MAGNETS 3-1/4IN
MAGNETS 3-1/4IN0
Our Price: $7.99
General Tools LED Tweezer, 6-1/4 in Length, Smooth Tip, Heat Treated Steel, Includes: (3) LR41 Batteries, Non-Slip Cushion Grip, For Retrieval Flexible magnetic tape is adhesive on one side, magnetic on the other. Perfect for making lightweight projects magnetic. Can be used in the home, school and office. National Hardware Magnetic Base, Series: N302, Round, 3-1/4 in Diameter, Ceramic 5 Magnet, Nylon Body
General Tools 392 High Power Magnetic Pick-Up Stanley 84-112 Linesman Plier Eklind 15140 Hex L-Key
General Tools Magnetic Pick-up, High Power, 8-3/4 in Length, 2 lb Load Capacity, Steel, Nickel Plated, For Retrieving Steel Parts From Hard-to-Reach places Made from forged steel with rust resistant finish, hardened cutting edges for durability, and serrated jaw for additional grip and leverage. Double dipped handle for comfort. Meets or exceeds ANSI standards. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish.
Master Magnetics 07201 Latch Magnet Master Magnetics 07213 Powerful Handle Magnet Eklind 15110 Hex L-Key
Latch magnets feature welded solid steel construction; able to lift, hold and retrieve metal objects up to 100 times their own weight. Can be used to secure gates or doors or as small tool holders, door stops, magnetic clamps and fixture holders, and separate magnetic from non-magnetic materials. Powerful handle magnets feature solid steel construction with welded handles. Durable red powdercoat finish resists scratching. Lifts heavy objects such as shelving, beams and doors. Use to clean up scattered iron objects, such as nails, screws, bolts. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish.
Eklind 51620 Hex T-Key Master Magnetics 07257 Flexible High Energy Craft Magnet Master Magnetics 07508 Threaded Magnetic Pickup With Broom Handle
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches. Thirty geometric, high energy flexible magnets feature magnetism on both sides and are useful for posting messages on work or tracking boards. Consists of ten of each shape (circle, triangle and square). Each approx. 1.25" tall. Attach an acme threaded standard broom handle to this pre threaded magnetic base; wing nut adjustment for the handle angle. Use to reach tools, nuts, bolts and other ferrous metal items with ease. Handle not included.
Stanley 84-105 Fixed Joint Diagonal Cutting Plier Eklind 15109 Hex L-Key Eklind 13607 Long Arm L Handle Hex Key Set
Made of forged steel with hardened cutting edges for durability and a rust resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, and molded plastic holder. Carded.
Stanley 87-367 Adjustable Wrench Vise-Grip 2078506 Groove Joint Plier Mintcraft JL149063L Adjustable Wrenches
Tempered chrome vanadium steel wrench for fastening or holding nuts and bolts in shop or home. Rust resistant polished chrome finish and a handy hang hole for wall storage.  Exceeds ANSI specification. Carded. Durable nickel chromium steel construction. ProTouch grips provide extra comfort and reduces hand fatigue. Right angle teeth grip in all directions for maximum bite. Meets or exceeds ANSI specifications. Made of heat treated, drop forged, chrome vanadium steel. Hardness and torque meets or exceeds ANSI specifications B107.8M. Non slip handle grip. Jaw Opening: 1.04" (26.3mm).
Stanley 84-101 Fixed Joint Long Nose Plier Master Magnetics 07206 Retrieving Magnet Master Magnetics 07569 Flex-Extend Extra Long Magnetic Pickup
Made of forged steel with long tempered jaws for working in hard to reach areas, and a rust resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards. Heavy duty holding and retrieving magnets; each magnet features welded solid steel construction. Attach a rope or rod to magnet?s eyebolt for retrieving. Used for sporting, household, industrial and commercial uses. Eyebolt and nuts included. Contains neodymium magnet that can retrieve heavy tools, nuts, bolts and other items that are out of reach. Features vinyl handle grip, durable aluminum tubing. Loosen knurled collar and pull bendable shaft to desired length, tighten callor to keep length. Extends from 20" to 36" .
General Tools 395 Bendable Flexible Magnetic Pickup General Tools 396 Mechanical Pickup Retractable Steel Tip Wiss WEZSNIP Spring Loaded Utility Snip
Aluminum shaft that can be bent, twisted and contorted to navigate the most complex work areas; equipped with a high powered Neodymium magnet that is capable of lifting up to two pounds. Used in the automotive, HVAC, machinist and general maintenance professions. Strong four prong steel jaws retrieve small items from hard to reach places. Smooth actuator for greater control, chrome finish to prevent rust, flexible shaft to avoid obstacles Lightweight, strong, 420 stainless steel blades for corrosion resistance. Spring assist action minimizes fatigue. Wire cutting notch in lower blade and thumb latch secures blades closed for storage. Textured, molded handles for secure, comfortable grip.
Eklind 10018 Long Arm L Handle Hex Key Set Eklind 21172 Medium Fold-Up Hex Key Set Master Magnetics 07287 Round Magnet Key Ring
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes inch sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 5/32, 3/16, 7/32, 1/16, 5/64, 3/32, 1/8 , 9/64, 5/32, 3/16, 1/4, 5/16, and holder. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes MM sizes: 2, 2.5, 3, 4, 5, 6, and 8. Carded Neodymium magnet with attached keyring is super powerful. Includes a non scratch liner. Used to hang keys or decorations.
Stanley 84-032 Fixed Joint Long Nose Plier Vise-Grip Fast Release Locking Plier Vise-Grip Fast Release Locking Plier
Machined jaws help grip items securely. Used for grasping or bending small objects. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Curved jaw puts tremendous pressure on four points for any application that requires maximum torque. Classic trigger release provides maximum locking force; built-in wire cutter great for a variety of applications and material shapes. Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Curved jaw puts tremendous pressure on four points for any application that requires maximum torque. Classic trigger release provides maximum locking force; built-in wire cutter great for a variety of applications and material shapes. Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
Stanley 84-029 Fixed Joint Linesman Plier Master Magnetics 07503 Retrieving Magnet With Shield General Tools 555 Flat Inspection Mirror
Machined jaws help grip items securely. Used in applications such as bending, grasping and cutting hard wire. Heavy duty retrieving magnets with eyebolt  and nuts to add on the top or side of the magnet; use to hold, lift and hang objects. Each powerful magnet assembly is encased in bright red nylon casing with black rubber sides. Includes two shields to help retain magnetic power and allows easy storage in a toolbox without attracting other tools. Fully polished glass mirrors are enclosed in plated holders which are attached to knurled handles with ball and socket joints; facilitate inspection of inaccessible workpieces and machines by toolmakers, assemblers, inspectors and mechanics. Mirror diameter 1-1/4", arm length 6".
General Tools 532 Pocket Reading Magnifier Master Magnetics 07013 Flexible Large Magnetic Tape Stanley 84-109 Groove Joint Plier
Lens is made of ground and polished optical glass and pivots into case for storage; stores easily in a pocket. Used by machinist, inspectors, jewelers and hobbyists. Carded. Flexible magnetic tape is adhesive on one side, magnetic on the other. Perfect for making lightweight projects magnetic. Can be used in the home, school and office. Forged steel construction, machined jaws for slip-resistant grip, rust resistant finish, and a double dipped handle for comfort. Meets or exceeds ANSI standards.
Ergo-Fold 25912 Ergonomic Fold-Up Small Hex Key Set Master Magnetics 07254 Magnetic Decor Hook Stanley 84-034 Bi-Material Tongue and Groove Plier
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a ergonomic handle. Includes inch sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, and 3/16. Carded. Two part ceramic magnet can be used to hold wreaths or other decorations through single-pane windows by placing a magnet on each side of the glass, then hang the decoration. Also used as two single magnetic hooks on metal surfaces. Protective lining helps prevent surface scratching. Stanley Tongue and Groove Plier, Bi-Material, Curved Jaw, 7/8 in Length X 7/8 in Width Jaw, Alloy Steel Jaw, Gloss, Ergonomic, Slip Resistant Handle, 8 in Overall Length, ANSI Specified, 1 in Jaw Opening, 6 Jaw Positions
Stanley 84-028 Bi-Material Diagonal Plier Ergo-Fold 25171 Ergonomic Fold-Up Small Hex Key Set Stanley 82-115 Slip Resistant Pick Hook Set
Stanley Diagonal Plier, Bi-Material, 13/16 in Length X 1-7/64 in Width Jaw, Drop Forged Steel Jaw, Ergonomic, Slip Resistant Handle, 7 in Overall Length, Black, ANSI Specified, 17/32 in Tip Width Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a ergonomic handle. Includes MM sizes: 1.5, 2, 2.5, 3, 4, 5, and 6. Carded. Stanley Pick Hook Set, Slip Resistant, 6 in Length, 4 Pieces, Includes: Full Hook, Angle Hook, 90 deg Hook and Straight Pick, Steel Shaft, Plastic Grip, For Marking Metal, Punching Holes and Working With O-Rings, Gaskets, Washers and Other Small Parts
Master Magnetics 07501 Magnet Handle With Magnetic Shield UltraTech 70396 Flexible Shaft Pickup Plastic/Aluminum Handle Stanley 84-108 Fixed Joint Diagonal Cutting Plier
Master Magnetics Magnet Handle, 4-1/2 in Length, 1 in Width, 3-3/8 in Height, 100 lb Load Capacity, Plastic, Red Retrieve items from dark, hard-to-reach places; continued push opens retrieval claw, ergonomically hand controls, flexible shaft, strong spring steel retrieval claw and push On LED light. Includes: (3) LR41 batteries. Made of forged steel with hardened cutting edges for durability and a rust resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards.
Vise-Grip 0702L3 Fast Release Locking Plier Eklind 20812 Fold-Up Hex Key Set Griplock GL6 Tongue and Groove Plier
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Curved jaw puts tremendous pressure on four points for any application that requires maximum torque. Classic trigger release provides maximum locking force; built-in wire cutter great for a variety of applications and material shapes. Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes inch sizes: 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4. Carded. Ergonomic offset head for greater leverage, special jaw accommodates many shapes and PermaLock fastener eliminates nut and bolt failures. Channellock Blue grips for comfort. Made in USA.
Griplock GL10 Tongue and Groove Plier Vise-Grip The Original 1602L3 Long Nose Locking Plier Ergo-Fold 25911 Ergonomic Fold-Up Medium Hex Key Set
Ergonomic offset head for greater leverage, special jaw accommodates many shapes and PermaLock fastener eliminates nut and bolt failures. Channellock Blue grips for comfort. Made in USA. Turn screw to adjust pressure and fit work, convenient wire cutter, stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Long, straight nose provides easy access in narrow, hard-to-reach places. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a ergonomic handle. Includes inch sizes: 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, and 1/4. Carded.
Eklind 51624 Hex T-Key General Tools 862 Probe and Hook Set Master Magnetics 07214 Powerful Handle Magnet
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches. Each probe features an extended-length aluminum body with a knurled grip, hexagonal head to prevent rolling and is made with heat treated, high-carbon steel points; 6-1/2" in overall length. Used for picking, marking and cleaning a variety of work surfaces or to remove old gaskets and o-rings during a mechanical repair or to position wires during electrical installations. Includes three probes: 45 degree, double bend, hook bend.". Powerful handle magnets feature solid steel construction with welded handles. Durable red powdercoat finish resists scratching. Lifts heavy objects such as shelving, beams and doors. Use to clean up scattered iron objects, such as nails, screws, bolts.
Vise-Grip 2078508 Groove Joint Plier General Tools 60004 Probe Set Vise-Grip 4935320 Groove Joint Plier
Durable nickel chromium steel construction. ProTouch grips provide extra comfort and reduces hand fatigue. Right angle teeth grip in all directions for maximum bite. Meets or exceeds ANSI specifications. Features the most popular hook and probe styles in a smaller, fixed-length design. The probes are useful for cleaning and marking small work surfaces, as well as for separating and positioning electrical wires. Blades are 2-5/8" in length; overall Length of tool is 6" and Versa-Grip handle for comfort and control. Includes 4 probes: straight probe, 35 degree bend, 90 degree bend, 180 degree hook probe. Durable nickel chromium steel construction. ProTouch grips provide extra comfort and reduces hand fatigue. Right angle teeth grip in all directions for maximum bite. Meets or exceeds ANSI specifications.
Mintcraft JL-PR51100-15  Bent Nose Pliers Mintcraft Pro JL-NP040  Mini End Cutting Pliers General Tools 70403 LED Tweezer
Made of drop forged steel that is fully polished and heat treated. Tapered jaws for working in tight areas; non-slip vinyl grip. Drop forged chrome nickel steel for durability; fully polished finish resists rust and corrosion; hardened and tempered sharp cutting edges; ergonomic anti-slip cushioned grips for comfort and less hand fatigue; hardness meets or exceeds ANSI standards. General Tools LED Tweezer, 6-1/2 in Length, Serrated Blunt Tip, Heat Treated Steel, Includes: (3) LR41 Batteries, Non-Slip Cushion Grip, For Retrieval
General Tools 558 Adjustable Flat Glass Inspection Mirror General Tools 383NX Extendable Telescoping Magnetic Pick-Up Stanley 84-024 Groove Joint Plier
General Tools Glass Inspection Mirror, Adjustable, Flat, 1 X 2 in Mirror, Oval Shape, 9 in Length, Fixed, Cushion Grip, Knurled Handle, 6 in Arm Length, For Toolmakers, Assemblers, Inspectors and Mechanics General Tools Magnetic Pick-up, Extendable, Telescoping, 23-1/2 in Length, 2 lb Load Capacity, Steel, Nickel Plated, For Retrieving Steel and Iron Parts From Hard-to-Reach Work Areas Adjustable-width jaw used for grasping and turning, rust resistant chrome finish and machined jaws help grip items securely. Used for plumbing, automotive and general applications.
Mintcraft 10002-PRP-53L Snap Ring Pliers Set Vise-Grip 09T Fast Release Locking Plier Eklind 10509 L Handle Short Arm Hex Key Set
Change easily from internal to external rings. Heavy duty return spring. Effective range of 3/8" - 2"; for 6 Internal/External purposes. Includes (3) three convertible tips:  180 degrees, 90 degrees, and 45 degrees. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth that are made to grip from any angle. One handed, triggerless release is easier to open, anti-pinch, non-slip ProTouch grips, wire cutter. Curved jaw puts pressure on four points. Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, and moled plastic holder.
Channellock 426 Tongue and Groove Plier Vise-Grip The Original 0302L3 Locking Plier Vise-Grip The Original Locking Plier
Right angle, laser heat treated teeth made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Undercut tongue and groove design won't slip, reinforcing edge minimizes stress breakage, PermaLock fastener eliminates nut and bolt failure. Channellock Blue grips for comfort. Made in USA. Locking pliers without wire cutter constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Straight jaws with hardened teeth provide maximum contact on flat, square, or hex work. Guarded release trigger quickly unlocks and protects from accidental release are made to grip from any angle; used for tightening, clamping, twisting and turning. Made of high-grade heat-treated alloy steel for maximum toughness and durability; replaces up to 16 wrench sizes. Heavy duty jaws lock on to three sides of a hex fastener and will not slip or mar; turn screw to adjust pressure and fit work, stays adjusted for repetitive use. Classic trigger release provides maximum locking force. Includes a built-in wire cutter.
Eklind 20511 Fold-Up Large Hex Key Set Stanley 84-102 Fixed Joint Straight Long Nose Plier FatMax 14-563 Compound Action Aviation Snip
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes inch sizes: 3/16, 7/32, 1/4, 5/16, and 3/8. Carded. Made of forged steel with long tempered jaws for working in hard to reach areas, and a rust resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards. High-leverage, compound cutting design cuts up to 18 gauge steel. Serrated cutting edges, double overwind spring for longer life, and chrome plated hardware. Latch automatically releases with the squeeze of the handles . Slip-resistant, bi-material cushion grip. Exceeds ANSI standards for cutting performance and durability.
Vise-Grip 2078900 Convertible Internal/External Snap Ring Plier Vise-Grip 4935351 Quick Adjusting Groovelock Plier Vise-Grip 4935321 Groove Joint Plier
One pair replaces two for internal or external use; includes four interchangeable tips for ease in moving from one project to the next; "ProTouch" grips provide extra comfort for less hand fatigue. Simple push of innovative press and slide button adjusts lower jaw 2X faster; multi-groove ratcheting system provides precise jaw positioning to grip any type of surface; anti-pinch, non-slip "ProTouch Grips" provide comfort, control and less hand fatigue; right angle teeth grip in all directions for maximum performance; "Metal Injection Mold" (MIM) process for precision parts  delivers strength and performance. Durable nickel chromium steel construction. ProTouch grips provide extra comfort and reduces hand fatigue. Right angle teeth grip in all directions for maximum bite. Meets or exceeds ANSI specifications.
Vise-Grip 2078510 Groove Joint Plier Channellock 412 V-Jaw Tongue and Groove Plier Crescent C5CV Compound Action Locking Plier
Durable nickel chromium steel construction. ProTouch grips provide extra comfort and reduces hand fatigue. Right angle teeth grip in all directions for maximum bite. Meets or exceeds ANSI specifications. V-Jaws with right angle, laser heat treated teeth give you more points of contact on round stock and tubing. Made of high-carbon steel for superior performance on the job and electronic coating for rust prevention. Undercut tongue and groove won't slip, reinforcing edge minimizes stress breakage, PermaLock fastener eliminates nut and bolt failure. Channellock Blue grips for comfort. Made in USA. Versatile curved jaw with angled tooth pattern for better grip also features integral wire cutter. Locking C clamps are faster and easier to use. Compound action for powerful non-slip locking grip. Nickel-plated finish resists rust and corrosion. Maximum jaw opening per ASME specs.
General Tools 1491 Straight Pipe Wrench Eklind 10213 Long Arm L Handle Hex Key Set General Tools 384N Extendable Flex-O-Stiff Magnetic Pick-Up
General Tools Pipe Wrench, Straight, 1-1/2 in Pipe, 10 in Overall Length, Forged Steel Jaw, Iron Handle, For Most Pipes, Nipples and Fittings Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes inch sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, 3/8, and holder. General Tools Magnetic Pick-up, Extendable, Flex-O-Stiff, 32 in Length, 2 lb Load Capacity, Neodymium, Nickel Plated, For Retrieving Steel Parts From Hard-to-Reach places
SCISSORS SET 4 PIECE          Wiss W912 Lightweight Shop Scissor Eklind 13211 Long Arm L Handle Hex Key Set
Olympia Scissor Set 4pc
Our Price: $11.99
Assorted scissor set for everyday cutting projects; includes scissor with laser cutting guide; sharp stainless steel stamped blades; durable impact resistant handles 2PC LR44 cell batteries included. High leverage comfort grip for right or left-handed use. 420 Stainless blades provide maximum corrosion resistance. Serrated lower blade grips materials securely for more even cutting. Adjustable pivot allows fine-tuning to most corrosion resistance. Serrated lower blade grips materials securely. Adjustable pivot allows fine-tuning. Blunt point on lower blade. Semi-circular notch on lower blade. Heavy-duty blade cuts cardboard, heavy fabric, rope, rubber, screen, and more. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes Inch sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32,  1/4, and molded plastic holder. Carded.
Crescent C10SV Compound Action Locking Plier FatMax 14-562 Compound Action Aviation Snip Superior 02808 Straight Pipe Wrench
Nickel-plated finish resists rust and corrosion, angled tooth pattern for better grip, compound action for powerful non-slip locking grip, long nose with wire cutter gets to hard-to-reach spots. Locking C clamps are faster and easier to use than standard clamps. Maximum jaw opening per ASME specs High-leverage, compound cutting design cuts up to 18 gauge steel. Serrated cutting edges, double overwind spring for longer life, and chrome plated hardware. Latch automatically releases with the squeeze of the handles . Slip-resistant, bi-material cushion grip. Exceeds ANSI standards for cutting performance and durability. Heavy duty cast iron pipe wrench is durable, easy to adjust and use. New, stronger ductile iron material and PowerFlange configuration add additional strength at critical stress areas of the handle. Many parts are interchangeable with other manufacturers? pipe wrenches. Durable epoxy powder coated finish.
Stanley 87-471 Adjustable Wrench Eklind 21151 Fold-Up Large Hex Key Set Vise-Grip The Original 1402L3 Long Nose Locking Plier
Tempered chrome vanadium steel wrench for fastening or holding nuts and bolts in shop or home. Rust resistant polished chrome finish and a handy hang hole for wall storage.  Exceeds ANSI specification. Carded. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes MM sizes: 3, 4, 5, 6, 8, and 10. Carded Turn screw to adjust pressure and fit work, convenient wire cutter, stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Long, straight nose provides easy access in narrow, hard-to-reach places.
Vise-Grip The Original 0102L3 Locking Plier Vise-Grip 0502L3 Fast Release Locking Plier Vise-Grip 4935576 Fast Release Locking Plier
Locking pliers without wire cutter constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Straight jaws with hardened teeth provide maximum contact on flat, square, or hex work. Guarded release trigger quickly unlocks and protects from accidental release are made to grip from any angle; used for tightening, clamping, twisting and turning. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Curved jaw puts tremendous pressure on four points for any application that requires maximum torque. Classic trigger release provides maximum locking force; built-in wire cutter great for a variety of applications and material shapes. Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release. Locking pliers without wire cutter constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Curved jaw puts tremendous pressure on four points for any application that requires maximum torque. Classic trigger release provides maximum locking force. Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
Vise-Grip 4935578 Fast Release Locking Plier Irwin 23007 Tinners Snip 7 in L Irwin 22007 Tinners Snip 7 in L Double Dipped
Locking pliers without wire cutter constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Curved jaw puts tremendous pressure on four points for any application that requires maximum torque. Classic trigger release provides maximum locking force. Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release. Hot drop-forged steel blades with precision ground edges provide strength, long life and a tight grip.  Durable spring washer holds blades tightly against each other when cutting. Duckbill blades for straight and tight curves. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting. Cuts cold rolled steel and  stainless steel. Hot drop-forged steel blades with precision ground edges provide strength, long life and a a tight grip. Durable spring washer holds blades tightly against each other when cutting. Flat blades for straight and wide curves. Cuts cold rolled steel and stainless steel. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting.
Eklind 13207 Long Arm L Handle Hex Key Set Wiss Metal Wizz MPC3 Utility Snip General Tools 557 Flat Inspection Mirror
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes Inch sizes: 5/64, 3/32, 1/8 , 5/32, 3/16, 7/32, 1/4, and molded plastic holder. Carded. Cuts curves, straight or any combination; cuts low carbon cold rolled steel. Non-slip serrated jaw of molybdenum steel for compound lever action. Spring-action for fast, effortless feed, handle of high tensile strength alloy steel exceeds hand power limit. Non-slip, textured grips and safety latch for superior control. Used to cut screening, hardware cloth, synthetic shingles, tile gutters. Glass mirrors are enclosed in plated holders which are attached to handles with adjustable ball and socket joints. This inspection mirror helps to facilitate inspection of inaccessible workplaces and machines. Overall length 10 1/2" extends to 15"; cushion grip handle.
Vise-Grip 2078108 Multi-Fit Quick Adjusting Groovelock Plier Stanley 87-369 Adjustable Wrench FatMax 14-564 Compound Action Aviation Snip
Right angle teeth grip in all directions for maximum bite. Simple push of innovative press-n-slide button adjusts lower jaw. Multi-Groove ratcheting system provides precise jaw positioning to grip any type of surface. Anti pinch, non-slip ProTouch Grips provide comfort, control, and less hand fatigue. Tempered chrome vanadium steel wrench for fastening or holding nuts and bolts in shop or home. Rust resistant polished chrome finish and a handy hang hole for wall storage.  Exceeds ANSI specification. Carded. High-leverage, compound cutting design cuts up to 18 gauge steel. Serrated cutting edges, double overwind spring for longer life, and chrome plated hardware. Latch automatically releases with the squeeze of the handles . Slip-resistant, bi-material cushion grip. Exceeds ANSI standards for cutting performance and durability.
Crescent C7SV Compound Action Locking Plier Crescent C7CV Compound Action Locking Plier Mintcraft JL149083L Adjustable Wrenches
Nickel-plated finish resists rust and corrosion, angled tooth pattern for better grip, compound action for powerful non-slip locking grip, long nose with wire cutter gets to hard-to-reach spots. Locking C clamps are faster and easier to use than standard clamps. Maximum jaw opening per ASME specs Versatile curved jaw with angled tooth pattern for better grip also features integral wire cutter. Locking C clamps are faster and easier to use. Compound action for powerful non-slip locking grip. Nickel-plated finish resists rust and corrosion. Maximum jaw opening per ASME specs. Made of heat treated, drop forged, chrome vanadium steel. Hardness and torque meets or exceeds ANSI specifications B107.8M. Non slip handle grip. Jaw Opening: 1.04" (26.3mm).
DeWalt DWHT70262M Folding Locking Hex Key Set Stanley 84-113 Linesman Plier Wiss W8TA Lightweight EZ Scissor
This product has a push-button locking feature that locks in 3 positions at 90 degree, 135 degree and 180 degree; durable and ergonomic construction with steel side plate for torque (up to 600 in. lbs); soft rubber grip; includes 8 important sizes: 3/32?, 7/64?, 1/8?, 9/64?, 5/32?, 3/16?, 7/32? and 1/4?. Made from forged steel with rust resistant finish, hardened cutting edges for durability, and serrated jaw for additional grip and leverage. Double dipped handle for comfort. Meets or exceeds ANSI standards. Cuts paper, fabric, cardboard, craft materials and more. Strong, high quality stainless steel blades for corrosion resistance. Take apart blades. Dishwasher-safe polypropylene grips. Serrated blades grip uneven materials. Semi-circular notch on lower blade for cutting plant stems and other similar-shaped items.
Vise-Grip 2078500 Groove Joint Plier General Tools 80560 Flat Lighted Telescoping Inspection Mirror General Tools UltraTech Lighted Pick-Up Plastic Handle
Durable nickel chromium steel construction. ProTouch grips provide extra comfort and reduces hand fatigue. Right angle teeth grip in all directions for maximum bite. Meets or exceeds ANSI specifications. General Tools Inspection Mirror, Flat, Lighted, Telescoping, 2 X 3 in Mirror, Rectangular Shape, Versa-Grip Handle, 360 deg Swivel, Includes: (2) CF2032 Batteries, 12-1/4 - 33 in Extendable Shaft, For Toolmakers, Assemblers, Inspectors and Mechanics General Tools Mechanical Pick-Up, Lighted, Series: UltraTech, Plastic Handle, Black Handle, 36 in Overall Length, Includes: (3) LR-44 Batteries
General Tools 369 Flexible Magnetic Strip Vise-Grip 2078218 Long Nose Plier Vise-Grip Fast Release Long Nose Locking Plier
General Tools Magnetic Strip, Flexible, 10 ft Length, 1 in Width, 1/16 in Height, For Sewing, Crafts and Work Benches Made of durable nickel chromium steel with induction hardened cutting edge that stays sharper, longer, machined jaws for maximum gripping strength. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Long, straight nose provides easy access in narrow, hard-to-reach places, no-slip ProTouch grip. Turn screw to adjust pressure and fit work, stays adjusted for repetitive use, wire cutter, and FastRelease has a no-trigger release, and offers one hand operation.
Vise-Grip Fast Release Locking Plier Eklind 35195 T-Handle Long Arm Hex Key Set Vise-Grip 2078216 Long Nose Plier
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth that are made to grip from any angle. One handed, triggerless release is easier to open, anti-pinch, non-slip ProTouch grips, wire cutter. Curved jaw puts pressure on four points. Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes MM sizes: 2.5, 3, 4, 5, 6, and storage pouch. Made of durable nickel chromium steel with induction hardened cutting edge that stays sharper, longer, machined jaws for maximum gripping strength. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications.
Vise-Grip 2078318 End Cutting Plier DeWalt DWHT70263M Folding Locking Hex Key Set Vise-Grip 2078512 Groove Joint Plier
Made of durable nickel chromium steel with induction hardened cutting edge that stays sharper, longer. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications. Push-button locking feature that locks in 3 positions at 90 degree, 135 degree and 180 degree; durable and ergonomic construction with steel side plate for torque (up to 600 in. lbs); soft rubber grip; includes 8 important sizes: 1.5, 2, 2.5, 3, 4, 5, 6 and 8mm. Durable nickel chromium steel construction. ProTouch grips provide extra comfort and reduces hand fatigue. Right angle teeth grip in all directions for maximum bite. Meets or exceeds ANSI specifications.
Channellock 422 Tongue and Groove Plier Superior 02810 Straight Pipe Wrench Channellock 420 Tongue and Groove Plier
V-Jaws with right angle, laser heat treated teeth give you more points of contact on round stock and tubing. Made of high-carbon steel for superior performance on the job and electronic coating for rust prevention. Undercut tongue and groove won't slip, reinforcing edge minimizes stress breakage, PermaLock fastener eliminates nut and bolt failure. Channellock Blue grips for comfort. Made in USA. Heavy duty cast iron pipe wrench is durable, easy to adjust and use. New, stronger ductile iron material and PowerFlange configuration add additional strength at critical stress areas of the handle. Many parts are interchangeable with other manufacturers? pipe wrenches. Durable epoxy powder coated finish. Right angle, laser heat treated teeth made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Undercut tongue and groove design won't slip, reinforcing edge minimizes stress breakage, PermaLock fastener eliminates nut and bolt failure. Channellock Blue grips for comfort. Made in USA.
Channellock 424 Tongue and Groove Plier Vise-Grip Fast Release 13T Locking Plier Vise-Grip 11T Fast Release Locking Plier
Right angle, laser heat treated teeth made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Undercut tongue and groove design won't slip, reinforcing edge minimizes stress breakage, PermaLock fastener eliminates nut and bolt failure. Channellock Blue grips for comfort. Made in USA. Self-energizing lower jaw provides 3X more gripping power with no slipping or stripping; provides maximum torque without requiring heavy input pressure; one handed, triggerless release is 2X easier to open; anti-pinch, non-slip "ProTouchGrips" provide comfort, control and less hand fatigue; constructed of high-grade, heat-treated alloy steel for maximum toughness and durability; hardened teeth are designed to grip from any angle; hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release. Self-energizing lower jaw provides 3X more gripping power with no slipping or stripping; provides maximum torque without requiring heavy input pressure; one handed, triggerless release is 2X easier to open; anti-pinch, non-slip "ProTouchGrips" provide comfort, control and less hand fatigue; constructed of high-grade, heat-treated alloy steel for maximum toughness and durability; hardened teeth are designed to grip from any angle; hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
Wiss A13N/A13 Tinners Snip Crescent C6NV Compound Action Long Nose Locking Plier General Tools 370-2 Horseshoe Power Magnet
Blades of quality steel hot drop-forged for sharp edge, long life, rust resistant, and individually hand edged. Cuts straight and wide curves (when trimming light gauge stock); flat face guides tool along straight line. Cuts low carbon cold rolled steel. Cushion grip for comfort. Long nose with wire cutter gets to hard-to-reach spots, angled tooth pattern for better grip, compound action for powerful non-slip locking grip. Locking C clamps are faster and easier to use. Nickel-plated finish resists rust and corrosion. Maximum jaw opening per ASME specs. Made primarily from aluminum, nickel, cobalt and iron;  powerful and sturdy and includes a keeper to help retain magnetic power. Used by crafters, teachers and do-it-yourselfers for retrieving small steel parts and screws from hard-to-get-at places. Carded.
Stanley 84-110 Groove Joint Plier General Tools 560 Inspection Mirror 3-1/2 in L x 2 in W FatMax 89-858 Solid Joint Diagonal Cutting Plier
Forged steel construction, machined jaws for slip-resistant grip, rust resistant finish, and a double dipped handle for comfort. Meets or exceeds ANSI standards. Fully polished glass mirrors are enclosed in plated holders which are attached to knurled handles with ball and socket joints, telescoping arms and vinyl cushion grip handles. Facilitate inspection of inaccessible workpieces and machines by toolmakers, assemblers, inspectors and mechanics. OA length is 11-1/2", extends to 16". Made of drop forged steel with 33 percent larger cutting edge and 45 percent less cutting effort required. Cuts wire and other thin materials. Comfortable bi-material grip.
Crescent C10CV Compound Action Locking Plier Vise-Grip 4935581 Fast Release Locking Plier Vise-Grip 05T Fast Release Locking Plier
Versatile curved jaw with angled tooth pattern for better grip also features integral wire cutter. Locking C clamps are faster and easier to use. Compound action for powerful non-slip locking grip. Nickel-plated finish resists rust and corrosion. Maximum jaw opening per ASME specs. Self-energizing lower jaw provides 3X more gripping power with no slipping or stripping; provides maximum torque without requiring heavy input pressure; one handed, triggerless release is 2X easier to open; anti-pinch, non-slip "ProTouchGrips" provide comfort, control and less hand fatigue; constructed of high-grade, heat-treated alloy steel for maximum toughness and durability; hardened teeth are designed to grip from any angle; hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth that are made to grip from any angle. One handed, triggerless release is easier to open, anti-pinch, non-slip ProTouch grips, wire cutter. Curved jaw puts pressure on four points. Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
Stanley MaxSteel Locking Plier Vise-Grip 2078306 Diagonal Cutting Plier Wiss MaxCut Snip
Curved jaws designed for tightening, clamping and turning round objects such as piping or nuts; induction hardened jaws last longer and grip better than non-induction hardened jaws; adjustment screw provides the ideal holding pressure; built-in wire cutter; forged steel is strong and durable; meets ANSI specifications. Made of durable nickel chromium steel construction with induction hardened cutting edge stays sharper, longer. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications. Great for cutting: sheet metal (low carbon rolled steel up to 20 gauge), plastics, vinyl, carpet, gutters, cardboard, paper, screen, wire mesh, hose, roof shingles, wallpaper, cloth, leather and more; blade design includes a twine cutter, wire cutter, bottle opener and wire bending holes for added versatility; 3" blade for making long cuts in a wide range of materials; serrated blade helps hold material firmly for better cutting; compound action design delivers 1.5x the cutting power of traditional design for less effort during cutting.
Crescent AC26VS Adjustable Wrench MaxSteel 14-569 Tinners Snip Vise-Grip 2078606 Adjustable Wrench
Wide capacity jaw allows each tool to work with more fastener sizes; wider handle provides more comfort and less stress to the hand; chrome plating for superior resistance to rust and corrosion; increased knurl diameter for easier adjustment and increased load on fastener to reduce slip-off; laser etched scale provides a quick and convenient way to determine fastener size in either SAE or metric; fully polished face. Made of forged alloy (chrome-molybdenum) with chrome plated hardware. Serrated cutting edges prevent slippage when cutting. Slip-resistant grip. Exceeds ANSI standards for cutting performance and durability. Made of chrome vanadium with English and metric scales, extra wide capacity and hang hole for easy wall storage. Protouch grips reduce hand fatigue. Meets or exceeds ANSI specifications.
Channellock 430 Tongue and Groove Plier Wiss Metalmaster M1R Compound Action Aviation Snip Wiss Metalmaster M2R Compound Action Aviation Snip
Right angle, laser heat treated teeth made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Undercut tongue and groove design won't slip, reinforcing edge minimizes stress breakage, PermaLock fastener eliminates nut and bolt failure. Channellock Blue grips for comfort. Made in USA. Compound lever action;  cuts 18 gauge low carbon steel; non-slip serrated jaws made of molybdenum steel, self-opening action for fast, effortless feed, safety latch. Colored handles for ease of identification. Length is 9-3/4". Compound lever action;  cuts 18 gauge low carbon steel; non-slip serrated jaws made of molybdenum steel, self-opening action for fast, effortless feed, safety latch. Colored handles for ease of identification. Length is 9-3/4".
Wiss Metalmaster M3R Compound Action Aviation Snip Vise-Grip The Original Locking Plier Griplock GL12 Tongue and Groove Plier
Compound lever action;  cuts 18 gauge low carbon steel; non-slip serrated jaws made of molybdenum steel, self-opening action for fast, effortless feed, safety latch. Colored handles for ease of identification. Length is 9-3/4". Made of high-grade heat-treated alloy steel for maximum toughness and durability; replaces up to 16 wrench sizes. Heavy duty jaws lock on to three sides of a hex fastener and will not slip or mar; turn screw to adjust pressure and fit work, stays adjusted for repetitive use. Classic trigger release provides maximum locking force. Includes a built-in wire cutter. Ergonomic offset head for greater leverage, special jaw accommodates many shapes and PermaLock fastener eliminates nut and bolt failures. Channellock Blue grips for comfort. Made in USA.
Vise-Grip The Original Long Nose Locking Plier Eklind 10609 Long Arm L Handle Hex Key Set SNIP TIN 12IN STRAIGHT CUT CHM
Turn screw to adjust pressure and fit work, convenient wire cutter, stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Long, straight nose provides easy access in narrow, hard-to-reach places. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, and molded plastic holder. Carded. Drop forged AISI-6150 chrome vanadium serrated edged blades are induction hardened. Meets or exceeds Federal Specifications ANSI/ASME B107.16.1985. Matt grips.
Crescent AC28VS Adjustable Wrench DeWalt DWHT70286 Tinners Snip Master Magnetics 07542 Retrieving Magnet
Wide capacity jaw allows each tool to work with more fastener sizes; wider handle provides more comfort and less stress to the hand; chrome plating for superior resistance to rust and corrosion; increased knurl diameter for easier adjustment and increased load on fastener to reduce slip-off; laser etched scale provides a quick and convenient way to determine fastener size in either SAE or metric; fully polished face. Heavy-duty forged steel cuts up to 22 gauge cold rolled steel and 26 gauge stainless steel; double dipped slip resistant grip; meets or exceeds ANSI specifications in cutting performance and durability. Heavy duty holding and retrieving magnets; each magnet features welded solid steel construction. Attach a rope or rod to magnet?s eyebolt for retrieving. Used for sporting, household, industrial and commercial uses. Eyebolt and nuts included.
DeWalt DWHT70269 Pushlock Plier DeWalt DWHT70279 Aviation Single Snip DeWalt DWHT70287 Tinners Snip
Slim head design fits into tight places; push-lock technology with 17 locking positions for faster jaw adjustment; V-Jaw design for multi-purpose gripping; induction heat treated jaws for extra durability; bi-material cushion handle for strong grip and comfort. Flush hardware allows smooth access from pouch; 25% larger pivot bolt than leading competitors for longer tool life; internal locking mechanism with auto release; forged chrome molybdenum alloy providing longer cutting life; gauge cutting capacity: 18 gauge cold rolled steel, 23 gauge stainless steel. Heavy-duty forged steel cuts up to 22 gauge cold rolled steel and 26 gauge stainless steel; double dipped slip resistant grip; meets or exceeds ANSI specifications in cutting performance and durability.
Stanley 84-111 Groove Joint Plier General Tools 750 Mini-Light Telescoping Magnetizer/Demagnetizer Ergo-Fold 25611 Ergonomic Fold-Up Large Hex Key Set
Forged steel construction, machined jaws for slip-resistant grip, rust resistant finish, and a double dipped handle for comfort. Meets or exceeds ANSI standards. Mini light with neodymium magnetic pick up are both fastened to a stainless steel telescoping wand molded into a rugged high impact ABS plastic handle; telescopes from 7-3/4"-28-3/4". Uses (4) Alkaline, LR41, batteries with a battery life of 48 continuous hours; LED bulb has a life of 100,000 hours of continuous use. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a ergonomic handle. Includes inch sizes: 5/32, 3/16, 7/32, 1/4 , 5/16, and 3/8. Carded
Vise-Grip 2078208 Linesman Plier Irwin 22010 Tinners Snip 10 in L Double Dipped Irwin 23010 Tinners Snip 10 in L
Made of durable nickel chromium steel with machined jaws for maximum gripping strength and induction hardened cutting edge that stays sharper, longer. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications. Hot drop-forged steel blades with precision ground edges provide strength, long life and a a tight grip. Durable spring washer holds blades tightly against each other when cutting. Flat blades for straight and wide curves. Cuts cold rolled steel and stainless steel. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting. Hot drop-forged steel blades with precision ground edges provide strength, long life and a tight grip.  Durable spring washer holds blades tightly against each other when cutting. Duckbill blades for straight and tight curves. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting. Cuts cold rolled steel and  stainless steel.
Crescent R210CV Self-Locking Tongue and Groove Plier Channellock 442 Tongue and Groove Plier Irwin 2073112 Aviation Snip 10 in L
Made from forged, hardened and tempered tool steel. Used to grip all shapes like rods, pipes and cable connections. Precision milled ribs for smooth, positive interlock between two halves with no chance of halves separating or jumping out of grooves. Red non slip cushion handle grips. V-Jaws with right angle, laser heat treated teeth give you more points of contact on round stock and tubing. Made of high-carbon steel for superior performance on the job and electronic coating for rust prevention. Undercut tongue and groove won't slip, reinforcing edge minimizes stress breakage, PermaLock fastener eliminates nut and bolt failure. Channellock Blue grips for comfort. Made in USA. Cold formed blades. Easy push up release allows one handed operation. Long life spring for increased durability, lower serrated blade, 12 gauge alloy steel spines provide increased rigidity and less flexing. Cuts 18 gauge cold roll steel and 22 gauge stainless steel. Pro-Touch Grips resists twisting, and will not slip off. Length  is 10 inches.
Vise-Grip 2078608 Adjustable Wrench Irwin 2073113 Aviation Snip 10 in L Ergo-Fold 25161 Ergonomic Fold-Up Large Hex Key Set
Made of chrome vanadium with English and metric scales, extra wide capacity and hang hole for easy wall storage. Protouch grips reduce hand fatigue. Meets or exceeds ANSI specifications. Cold formed blades. Easy push up release allows one handed operation. Long life spring for increased durability, lower serrated blade, 12 gauge alloy steel spines provide increased rigidity and less flexing. Cuts 18 gauge cold roll steel and 22 gauge stainless steel. Pro-Touch Grips resists twisting, and will not slip off. Length  is 10 inches. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a ergonomic handle. Includes MM sizes: 3, 4, 5, 6, 8, and 10. Carded.
Vise-Grip 2078110 Multi-Fit Quick Adjusting Groovelock Plier H.K. Porter PWC9 Wire Cutter Vise-Grip 274102 Pipe Wrench
Right angle teeth grip in all directions for maximum bite. Simple push of innovative press-n-slide button adjusts lower jaw. Multi-Groove ratcheting system provides precise jaw positioning to grip any type of surface. Anti pinch, non-slip ProTouch Grips provide comfort, control, and less hand fatigue. Center cut blades, cuts mild steel (Brinel 140) (80,000 PSI) to 5/32" diameter, cuts hard steel (HRC 44) (208,000 PSI) to 3/32" diameter. Do not use cutters on energized circuits, wire, or cable. Steel handle, weighs 1/2 lb. Heavy-duty cast iron housing with drop forged jaw that is heat-treated to resist distortion or breakage, hardened teeth, easy spin adjusting nut, hammer head provides flat surface for hammering. I-Beam handle?s wide provides better weight distribution.
Irwin 2073111 Aviation Snip 10 in L Vise-Grip 4935096 Quick Adjusting Groovelock Plier FatMax 89-871 Bent
Cold formed blades. Easy push up release allows one handed operation. Long life spring for increased durability, lower serrated blade, 12 gauge alloy steel spines provide increased rigidity and less flexing. Cuts 18 gauge cold roll steel and 22 gauge stainless steel. Pro-Touch Grips resists twisting, and will not slip off. Length  is 10 inches. Simple push of innovative press and slide button adjusts lower jaw 2X faster; multi-groove ratcheting system provides precise jaw positioning to grip any type of surface; anti-pinch, non-slip "ProTouch Grips" provide comfort, control and less hand fatigue; right angle teeth grip in all directions for maximum performance; "Metal Injection Mold" (MIM) process for precision parts  delivers strength and performance. Made from drop forged from high carbon, alloy steel for long life and durability. Used for grasping or bending small objects and for cutting in cramped spaces. Bi-material grips provide a comfortable and secure grip.
FatMax 89-859 Lap Joint Design Oval Nose Diagonal Cutting Plier DeWalt DWHT70280 Left Side Cutter Aviation Snip DeWalt DWHT70281 Right Side Cutter Aviation Snip
FatMax Diagonal Cutting Plier, Lap Joint Design, Oval Nose, 15/16 in Length X 7/8 in Width Jaw, Drop Forged Steel Jaw, Ergonomic, Slip Resistant Handle, 7-1/2 in Overall Length, Yellow/Black, ANSI Specified, Flush Cut DeWalt Aviation Snip, Left, Side Cutter, 18 ga Cold Rolled Steel, 23 ga Stainless Steel Cutting Capacity, 1.4 in Length Blade, Forged Chrome Molybdenum Alloy Blade, 6-1/2 in Handle Length DeWalt Aviation Snip, Right, Side Cutter, 18 ga Cold Rolled Steel, 23 ga Stainless Steel Cutting Capacity, 1.4 in Length Blade, Forged Chrome Molybdenum Alloy Blade, 6-1/2 in Handle Length
Wiss W7T Utility Scissor Wiss W10T Scissor Wiss W10TM Lightweight Scissor
No-ring scissor is a great utility shear for the home, garden or workshop; features: spring loaded blades for reduced hand fatigue on repeated cuts; heavy duty, stainless steel blades have a Titanium coating that is 3X harder than steel for longer life and durability; precision ground blades for smooth cutting; cuts cardboard, heavy fabric, rope, leather, plastics and more. Titanium coating is 3X harder than steel for longer life; precision ground blades for smooth cutting; stainless steel blades for corrosion resistance; adjustable pivot allows for fine-tuning to most comfortable setting; ergonomic ring design for maximum comfort. Titanium coating is 3X harder than steel for longer life; full-length steel blade extends through the shear for maximum strength; heavy duty premium grade stainless steel blades for extra durability and strength; adjustable pivot allows for fine-tuning to most comfortable setting; ergonomic ring design for maximum comfort.
Channellock 804 Adjustable Wrench Crescent ProSeries PS5429C Compound Action Diagonal Cutting Plier Channellock 440 Tongue and Groove Plier
Made of chrome vanadium steel with 4 thread knurl and non-protruding jaws that provide greater capacity; minimal head width improves performance in confined spaces. Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters. Made of chrome vanadium steel for increased durability, heat treated joint rivet for smooth and consistent operation and induction hardened edges for long cutting life. Edge type is Standard, cut capacity is 11 AWG. Compound leverage design that increases cutting power by 50 percent and is 1/3 lighter than standard pliers, reduces fatigue. Co-molded grips for added comfort. Right angle, laser heat treated teeth made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Undercut tongue and groove design won't slip, reinforcing edge minimizes stress breakage, PermaLock fastener eliminates nut and bolt failure. Channellock Blue grips for comfort. Made in USA.
Wiss Multimaster M300 Utility Snip Irwin 2073211 Offset Snip 9-1/2 in L Channellock 806W Adjustable Wrench
Combines long cut of tinner's snips with the strength of compound action. For making long, fast cuts in several types of material. Cuts up to 20-gauge steel. Non-slip, serrated jaws and non-slip textured grips. Forged steel blades with exclusive pinch point wire cutter. Equipped with multiple pivot pins that provide compound cutting action; cuts 18 gauge cold rolled steel and 23 gauge stainless steel. ProTouch grips resist twisting, and will not slip off. Length 9-1/2 inches. Made of chrome vanadium steel with 4 thread knurl and non-protruding jaws that provide greater capacity; minimal head width improves performance in confined spaces. Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters.
FatMax 14-566 Compound Action Aviation Snip DeWalt DWHT70275 Compound Action Diagonal Cutting Plier DeWalt DWHT70276 Compound Action Linesman Plier
Serrated cutting edges with high leverage, compound cutting design cuts up to 18-gauge steel. Latch automatically releases with the squeeze of the handles, double overwind spring, chrome-plated hardware and hang hole. Slip-resistant, bi-material cushion grip. Exceeds ANSI standards for cutting performance and durability. More cutting power over standard cutting pliers; bi-material handles for strong grip and comfort; aggressive cross hatch tooth design for better gripping; Chrome vanadium steel for strength and durability; induction hardened cutting blades for improved strength and durability. More cutting power over standard cutting pliers; bi-material handles for strong grip and comfort; aggressive cross hatch tooth design for better gripping; chrome vanadium steel for strength and durability; induction hardened cutting blades for improved strength and durability.
DeWalt DWHT70277 Compound Action Long Nose Plier Superior 02814 Straight Pipe Wrench Fi-Shock ATMP-FS Fence Tool
More cutting power over standard cutting pliers; bi-material handles for strong grip and comfort; aggressive cross hatch tooth design for better gripping; Chrome vanadium steel for strength and durability; induction hardened cutting blades for improved strength and durability. Heavy duty cast iron pipe wrench is durable, easy to adjust and use. New, stronger ductile iron material and PowerFlange configuration add additional strength at critical stress areas of the handle. Many parts are interchangeable with other manufacturers? pipe wrenches. Durable epoxy powder coated finish. A drop forged carbon steel tool with vinyl grips; it pulls staples, twists wire, cuts wire and hammer too; this multi-purpose tool will help you properly maintain your electric fence.
Eklind 13609 L Handle Hex Key Set Wiss A11N/A11 Tinners Snip Wiss A12N/A12 Tinners Snip
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes MM sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, and molded plastic holder. Carded. Blades of quality steel hot drop-forged for sharp edge, long life, rust resistant, and individually hand edged. Cuts straight and wide curves (when trimming light gauge stock); flat face guides tool along straight line. Cuts low carbon cold rolled steel. Cushion grip for comfort. Blades of quality steel hot drop-forged for sharp edge, long life, rust resistant, and individually hand edged. Cuts straight and wide curves (when trimming light gauge stock); flat face guides tool along straight line. Cuts low carbon cold rolled steel. Cushion grip for comfort.
Vise-Grip 23 Lock Sheet Metal Tool Wiss V10N/V10 Tinners Snip Vise-Grip 274101 Pipe Wrench
Made of high grade heat treated alloy steel for maximum toughness and durability, turn screw to adjust pressure and fit work, stays adjusted for repetitive use. Classic trigger release to provide maximum locking force; easier bending, forming, and crimping of sheet metal. Blades of quality steel, hot drop-forged for sharp edge long life, individually hand edged and rust resistant. Cuts moderately tight curves left, right or straight in light stock. Cuts low carbon cold rolled steel. Cushion grip. Heavy-duty cast iron housing with drop forged jaw that is heat-treated to resist distortion or breakage, hardened teeth, easy spin adjusting nut, hammer head provides flat surface for hammering. I-Beam handle?s wide provides better weight distribution.
FatMax Push-Lock 84-649 Adjustable Groove Joint Plier Crescent C9NV Compound Action Long Nose Locking Plier Vise-Grip 2078308 Diagonal Cutting Plier
Push-Lock technology ensures jaw stays in place once put in position. Optimized jaw geometry for multiple gripping applications and increased accessibility, 17 button locked positions for heavy duty protection, position locking button with 3 laser etched marking for 3 opening positions. Drop forged construction for durability with induction hardened teeth for strength. Bi Material handles for comfort, grip and control. Long nose with wire cutter gets to hard-to-reach spots, angled tooth pattern for better grip, compound action for powerful non-slip locking grip. Locking C clamps are faster and easier to use. Nickel-plated finish resists rust and corrosion. Maximum jaw opening per ASME specs. Made of nickel chromium steel construction with right angle teeth grip in all directions for maximum bit. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications.
Stanley 84-114 Basic Plier Set Irwin 2073212 Offset Snip 9-1/2 in L Master Magnetics 07561 Magnetic Tool Holder
Forged Chrome-Nickel steel, durable, hand ground cutting edge, machined jaws for gripping, rust-resistant finish with double dipped handles for comfortable use. Includes (1) one each: Cutting, Needle Nose and Slip Joint. Forged steel blades with exclusive pinch point wire cutter. Equipped with multiple pivot pins that provide compound cutting action; cuts 18 gauge cold rolled steel and 23 gauge stainless steel. ProTouch grips resist twisting, and will not slip off. Length 9-1/2 inches. Hold and organize tools in garages, workshops, and work stations. Magnetic tool bar that holds 20# per inch. Easily mounts to walls , studs or workbench. Mounting screws included. 4-color packaging for retail.
DeWalt DWHT70270 Pushlock Plier Irwin 21304 Extra-Cut Utility Snip 11-3/4 in L Rubberized Cushion Grip Crescent R212CV Self-Locking Tongue and Groove Plier
Slim head design fits into tight places; push-lock technology with 17 locking positions for faster jaw adjustment; V-Jaw design for multi-purpose gripping; induction heat treated jaws for extra durability; bi-material cushion handle for strong grip and comfort. Multi purpose snips with compound cutting leverage, (duckbill blades, cuts straight and curves), E-Z close latch. Pro-Touch Grips and resists twisting. Cutting sheet metal, vinyl, plastic, rubber and 24 gauge cold rolled steel. Made from forged, hardened and tempered tool steel. Used to grip all shapes like rods, pipes and cable connections. Precision milled ribs for smooth, positive interlock between two halves with no chance of halves separating or jumping out of grooves. Red non slip cushion handle grips.
Vise-Grip Fast Release Locking Plier Vise-Grip Fast Release 15T Long Nose Locking Plier MaxSteel 14-556 Tinners Snip
Locking pliers without wire cutter constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth that are made to grip from any angle, heavy duty jaws grip around work of all shapes. Turn screw to adjust pressure and fit work, stays adjusted for repetitive use, and classic trigger release provides maximum locking force. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Long, straight nose provides easy access in narrow, hard-to-reach places, no-slip ProTouch grip. Turn screw to adjust pressure and fit work, stays adjusted for repetitive use, wire cutter, and FastRelease has a no-trigger release, and offers one hand operation. Made of forged alloy (chrome-molybdenum) with chrome plated hardware. Serrated cutting edges prevent slippage when cutting. Slip-resistant grip. Exceeds ANSI standards for cutting performance and durability.
Mintcraft JL149103L Adjustable Wrenches Ergo-Fold 25919 Medium Ergonomic Fold-Up Hex Key Set Vise-Grip 2078701 Professional Plier Set
Made of heat treated, drop forged, chrome vanadium steel. Hardness and torque meets or exceeds ANSI specifications B107.8M. Non slip handle grip. Jaw Opening: 1.04" (26.3mm). Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a ergonomic handle. Includes inch sizes: 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, and 1/4. Carded ProTouch grips provide extra comfort and reduces hand fatigue. Machined jaws for maximum gripping strength. Induction hardened cutting edge stays sharper, longer; includes: (1) 6" Slip Joint pliers and (1) 10" Groove Joint pliers.
Vise-Grip 1773639 Groove Joint Plier Set MINI AVIATION SNIPS OFFSET LEF MINI AVIATION SNIPS OFFSET RT
Vise-Grip Plier Set, Groove Joint, 2 Pieces, Includes: 6 in (GV6R) and 10 in (GV10R) Plier, 1-1/8 in, 2-1/4 in Maximum Jaw Opening, Nickel Chromium, Blue/Yellow Handle, ANSI Specified, Ergonomic Handle, For General Mechanical Repair, Plumbing Installation and Repair Goes to work in tight or awkward spaces where full-size aviation snips are challenged; a 3/4" length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels; forged steel jaws with precision-ground serrations on the lower blade product a sharply defined edge for cutting accuracy and control; soft, non-slip grip contours and an easily accessible handle opening compliment the natural power stroke of any size hand; spring-actuated, handles will not collapse. Overall length: 7-1/8". Goes to work in tight or awkward spaces where full-size aviation snips are challenged; a 3/4" length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels; forged steel jaws with precision-ground serrations on the lower blade product a sharply defined edge for cutting accuracy and control; soft, non-slip grip contours and an easily accessible handle opening compliment the natural power stroke of any size hand; spring-actuated, handles will not collapse. Overall length: 7-1/8".
Wiss M1X Compound Action Aviation Snip Wiss M2X Compound Action Aviation Snip Wiss M3X Compound Action Aviation Snip
Unique total system design requires 20% less force to cut; unique blade serrations spread cutting force across the blade improving cut quality and tool life; industry leading pivot design leads to longer overall snip life; integrated stops make sure the blades open all the way for maximum length of duct; handle design and compound leverage mechanism make cutting easier and reduce hand fatigue. Unique total system design requires 20% less force to cut; unique blade serrations spread cutting force across the blade improving cut quality and tool life; industry leading pivot design leads to longer overall snip life; integrated stops make sure the blades open all the way for maximum length of duct; handle design and compound leverage mechanism make cutting easier and reduce hand fatigue. Unique total system design requires 20% less force to cut; unique blade serrations spread cutting force across the blade improving cut quality and tool life; industry leading pivot design leads to longer overall snip life; integrated stops make sure the blades open all the way for maximum length of duct; handle design and compound leverage mechanism make cutting easier and reduce hand fatigue.
Crescent AC210VS Adjustable Wrench Eklind 55166 T-Loop Handle Short Arm Hex Key Set Eklind 33198 T-Handle Long Arm Hex Key Set
Wide capacity jaw allows each tool to work with more fastener sizes; wider handle provides more comfort and less stress to the hand; chrome plating for superior resistance to rust and corrosion; increased knurl diameter for easier adjustment and increased load on fastener to reduce slip-off; laser etched scale provides a quick and convenient way to determine fastener size in either SAE or metric; fully polished face. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes MM sizes: 2, 2.5, 3, 4, 5, 6, and storage pouch. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes inch sizes: 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4, and storage pouch.
DeWalt DWHT70271 Pushlock Plier Stanley 84-056 Bi-Material Plier Set Vise-Grip 2078610 Adjustable Wrench
Slim head design fits into tight places; push-lock technology with 17 locking positions for faster jaw adjustment; V-Jaw design for multi-purpose gripping; induction heat treated jaws for extra durability; bi-material cushion handle for strong grip and comfort. Machined jaws help grip items securely. Cutting pliers feature induction hardened cutting edges for long life. Bi-material handles. Includes (1) one each: 6" Diagonal, 6" Long Nose, 6" Slip Joint. Made of chrome vanadium with English and metric scales, extra wide capacity and hang hole for easy wall storage. Protouch grips reduce hand fatigue. Meets or exceeds ANSI specifications.
Channellock 436 Box Joint Diagonal Cutting Plier Channellock 337 High Leverage Lap Joint Diagonal Cutting Plier Crescent CLP2SET Locking Plier Set
Made of high-carbon steel for superior performance on the job and electronic coating for rust prevention; uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life. High leverage, laser heat-treated cutting edges last longer. Channellock Blue grips for comfort. Made in USA. Made of high-carbon steel for superior performance on the job and electronic coating for rust prevention; uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life. High leverage, laser heat-treated cutting edges last longer. Channellock Blue grips for comfort. Made in USA. Compound action for powerful non-slip locking grip, Long nose with wire cutter gets to hard-to-reach spots, angled tooth pattern for better grip, versatile curved jaw also features integral wire cutter. Locking C clamps are faster and easier to use. Nickel-plated finish resists rust and corrosion. Maximum jaw opening per ASME specs. Includes (1) one each: 7", 10" pliers.
Eklind 10022 Long Arm L Handle Hex Key Set Wiss Metalmaster M6R Offset Aviation Snip Wiss Metalmaster M7R Offset Aviation Snip
Made with Eklind alloy steel that is heat treated for optimum strength and ductility and a black finish to resist rust. Includes: Long Series Hex-L key set with Holder; inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, and 3/8, Short Series Hex-L key set with holder; MM Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10. Non-slip serrated jaw of molybdenum steel for compound lever action withstands strain of cutting heavy stock and tight curves. Offset blades keep hands clear of metal and cuts low carbon cold rolled steel.  Spring action for fast feed, handle of high tensile strength alloy steel exceeds hand power limit and handy hang-up hole. Non-slip, textured grips and safety latch for superior control.  Length is 9-1/4 inches. Non-slip serrated jaw of molybdenum steel for compound lever action withstands strain of cutting heavy stock and tight curves. Offset blades keep hands clear of metal and cuts low carbon cold rolled steel.  Spring action for fast feed, handle of high tensile strength alloy steel exceeds hand power limit and handy hang-up hole. Non-slip, textured grips and safety latch for superior control.  Length is 9-1/4 inches.
FatMax 89-875 Solid Joint End Cutting Plier Vise-Grip 2078702 Traditional Plier Set Vise-Grip 2078209 Linesman Plier
Made of drop forged from high carbon, alloy steel for long life and durability; high leverage for heavy use. Provides up to 45 percent less cutting effort with up to a 33 percent longer cutting edge. Bi-material grips provide a comfortable and secure grip. Professional grade tools; "ProTouch" grips provide extra comfort and reduces hand fatigue; machined jaws for maximum gripping strength; induction hardened cutting edge stays sharper; includes (1) 6" Slip Joint Pliers and (1) 6" Long Nose Pliers. Made of durable nickel chromium steel with machined jaws for maximum gripping strength and induction hardened cutting edge that stays sharper, longer. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications.
Channellock 808W Adjustable Wrench Vise-Grip 2078112 Multi-Fit Quick Adjusting Groovelock Plier FatMax 14-567 Compound Action Offset Aviation Snip
Made of chrome vanadium steel with 4 thread knurl and non-protruding jaws that provide greater capacity; minimal head width improves performance in confined spaces. Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters. Right angle teeth grip in all directions for maximum bite. Simple push of innovative press-n-slide button adjusts lower jaw. Multi-Groove ratcheting system provides precise jaw positioning to grip any type of surface. Anti pinch, non-slip ProTouch Grips provide comfort, control, and less hand fatigue. Serrated cutting edges with high leverage, compound cutting design cuts up to 18-gauge steel. Latch automatically releases with the squeeze of the handles, double overwind spring, chrome-plated hardware and hang hole. Slip-resistant, bi-material cushion grip. Exceeds ANSI standards for cutting performance and durability.
Eklind 10222 Long Hex-L Key Set FatMax 89-874 High Leverage Cable Cutter Crescent Professional PS6549C Long Nose Plier
Eklind Hex-L Key Set, Combo, Long, 22 Pieces, Includes: 10213: 13 pc Long Series Hex-L Key Set With Holder Sizes: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16 and 3/8 in and 10609: 9 pc Long Series Hex-L Key Set With Holder Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm, 2.8 - 6.8 in Length Arm, L-Shape Handle, Alloy Steel Made from drop forged from high carbon, alloy steel for long life and durability. Opposing concave cutters are hand finished and induction hardened for long life and clean cuts. Used for cutting coaxial and other soft cables. Bi-material grips provide a comfortable and secure grip. Made of chrome vanadium steel for increased durability with a heat treated joint rivet for smooth and consistent operation. Induction hardened edges for long cutting life. Compound leverage increases cutting power by 50 percent; 1/3 lighter than standard pliers, reduces fatigue. Co-molded grips for added comfort.
Stanley 87-473 Adjustable Wrench Channellock 338 High Leverage Lap Joint Diagonal Cutting Plier Crescent 5427CV Solid Joint Diagonal Cutting Plier
Tempered chrome vanadium steel wrench for fastening or holding nuts and bolts in shop or home. Rust resistant polished chrome finish and a handy hang hole for wall storage.  Exceeds ANSI specification. Carded. Made of high-carbon steel for superior performance on the job and electronic coating for rust prevention; uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life. High leverage, laser heat-treated cutting edges last longer. Channellock Blue grips for comfort. Made in USA. Made of forged alloy tool steel with electronically induction hardened hand-honed, long lasting cutting edges with a polished head. Individually tested for strength and cutting ability. Used for heavy-duty wire cutting. Edge type/cut is Standard; capacity is 12 AWG. Red non-slip cushion handle grips.
Channellock 326 Long Nose Plier With Cutter Wiss Metalmaster M5R Bulldog Aviation Snip Diamond GG010HN Solid Joint End Cutting Nipper
Made of high-carbon steel for superior performance and electronic coating for rust prevention; uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life. Crosshatch pattern on jaws grips work tightly, laser heat-treated cutting edges last longer, and Channellock Blue grips for comfort. Made in USA. Non-slip, serrated jaw made of tough molybdenum steel withstands strain of cutting heavy stock and tight curves; cuts 16 gauge low carbon steel. Spring-action for fast feed, handle of high tensile strength alloy steel exceeds hand power limit, handy hang-up hole. Non-slip, textured grips and safety latch for superior control. Length 9 1/4 inches. Made of drop forged from high quality diamond steel. Handles and jaws are heat treated, tempered for toughness. Sharp cutting edges are hardened and honed with good leverage; will cut large size nails and wires. Black finish, polished head.
MaxGrip 85-610 Adjustable Wrench Crescent 7776CVN/7776CV Solid Joint Needle Nose Plier Eklind 13213 Long Arm L Handle Hex Key Set
Two tools in one: traditional adjustable wrench and locking plier. Forged steel body with jaw grips fastener that won?t slip off. Exceeds ANSI standards for torque. Made of forged alloy tool steel and individually tested for strength. Long needle nose with excellent gripping ability; made for work in tight, narrow areas. Polished head and red non-slip cushion handle grips. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes Inch sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, 3/8, and molded plastic holder. Carded.
Irwin 22012 Tinners Snip 12-3/4 in L Irwin 23012 Tinners Snip 12-3/4 in L Double Dipped Channellock 357 End Cutting Plier
Hot drop-forged steel blades with precision ground edges provide strength, long life and a a tight grip. Durable spring washer holds blades tightly against each other when cutting. Flat blades for straight and wide curves. Cuts cold rolled steel and stainless steel. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting. Hot drop-forged steel blades with precision ground edges provide strength, long life and a tight grip.  Durable spring washer holds blades tightly against each other when cutting. Duckbill blades for straight and tight curves. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting. Cuts cold rolled steel and  stainless steel. Made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Uses a knife and anvil style cutting edge that is laser heat treated for longer lasting cutting edges. Channellock Blue grips for comfort. Made in USA.
Vise-Grip 2078909 Linesman Iron Workers Plier Master Magnetics 07247 Magnetic Pickup With Handle Crescent X2 Straight Long Nose Plier
Induction hardened cutting edge stays sharp longer; cross hatched teeth provide an aggressive grip. Jaw thickness 7/25", wire cutter  29/50". Pick up nails, nuts, bolts, screws and scrap metal; handle reaches under vehicles, workbenches, and tables. Long reach pliers with compound action joint for increased access in tight spaces; flush rivets for strength and thinner profile; dual material grips for added comfort; milled grooves in tips grip fasteners and other objects tightly.
Crescent X2 Bent Long Nose Plier FatMax 89-864 High Leverage Linesman Plier Channellock GripLock Straight Nose Plier Set
Long reach pliers with compound action joint for increased access in tight spaces; flush rivets for strength and thinner profile; dual material grips for added comfort; milled grooves in tips grip fasteners and other objects tightly. Made from drop forged from high carbon, alloy steel for long life and durability. High leverage pivot for easier cutting. Machined jaw faces used for gripping and twisting wire or other general applications. Bi-material handle provides a comfortable and secure grip. Made of high carbon steel for superior performance on the job; ergonomically designed offset head for greater leverage; special jaw accommodates many shapes; Channellock Blue Grips for comfort. Made in USA.
General Tools 370-4 Horseshoe Shaped Power Magnet General Tools 372D Button Magnet Grip-It S-6H Strap Wrench
General Tools Power Magnet, Horseshoe Shaped, 3/16 in Core Hole Diameter Diameter, 1-1/2 in Length, 1 in Width, 1 in Height, 22 lb Load Capacity, Alnico, 4 oz Size, For Lifting, Holding, Sorting and Clamping or Retrieving Steel or Iron Parts General Tools Button Magnet, 1-1/4 in Diameter, 3/4 in Height, 14 lb Load Capacity, Alnico, For Heavy Duty Applications Completely adjustable strap wrenches work in the tightest quarters; Urethane-covered, high-strength belting attached to lightweight, I-beam handle; cam-action design permits uniform, high-torque application; under normal conditions will not scratch, damage or deform polished pipe and fittings, plastic pipe and fittings, oil and water filters, glass pipe, PVC conduit and polished shafts; also work on alternator belts, flywheels and propeller assemblies.
Crescent NP11 Nail Puller Plier Channellock 810W Adjustable Wrench Mintcraft JL-HKT-8M  Hex T Key Sets
Allows users to easily extract nails regardless of size or if head is damaged or removed; removes nails easily from front or back of wood; dual handles make it quick and easy to grip, roll and remove nails or staples; forged steel head and handles create a durable tool with rubber grips for comfort and grip. Made of chrome vanadium steel with 4 thread knurl and non-protruding jaws that provide greater capacity; minimal head width improves performance in confined spaces. Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters. Chrome vanadium, hardened and tempered double end shank; hex and ball point for extra reach and leverage. Includes MM sizes: 2, 2.5, 3, 4, 5, 6, 8, and 10.
Channellock 317 Long Nose Plier With Cutter Crescent 6546CVSMLN/CV Solid Joint Long Chain Nose Plier Vise-Grip 2078901 Fencing Plier
Made of high-carbon steel for superior performance and electronic coating for rust prevention; uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life. Crosshatch pattern on jaws grips work tightly, laser heat-treated cutting edges last longer, and Channellock Blue grips for comfort. Made in USA. Made of forged alloy tool steel. Electronically induction hardened hand-honed, keen side cutting edges, polished head with red non-slip cushion handle grips. Used for reaching confined areas, long chain nose with fine serrated jaws to make wire loops and bends. Made of nickel chromium steel for overall strength and durability. Used to work on metal and wood posts. ProTouch grips provide extra comfort for less hand fatigue.
Stanley 84-079 Mini Plier Set Crescent Rapidslide AC8NKWMP Adjustable Wrench Crescent 507CVN/507CV Bevel Cut
Designed for grasping, bending and cutting small objects. Includes: (1) 4" Diagonal pliers; (1) 4" End cutting pliers; (1) 4" Bent Nose Pliers; (1) 5" Long Nose Pliers; (1) 5" Flat Nose Pliers and (1) 5" Groove Joint Pliers. Made of forged steel with chrome finish and polished head, slide button with debris shield in handle for fast adjustment, SAE/Metric size indicator on jaw. Used for electrical work. Made of forged alloy tool steel that is electronically induction hardened, durable and keen side cutting edges, solid joint,  and a polished head. Spring tempered handles with red non slip cushion handle grips.
MaxSteel 14-558 Tinners Snip Diamond DFT10 Fence Tool Wiss A9N/A9 Tinners Snip
Made of forged alloy (chrome-molybdenum) with chrome plated hardware. Serrated cutting edges prevent slippage when cutting. Slip-resistant grip. Exceeds ANSI standards for cutting performance and durability. For wood and steel posts on ranch or farm. Heavy duty lock joint construction with oval faced jaws. Start and pull point on one jaw with corrugated hammer head on the other. Pulls staples and splices wire stretcher behind joint. Solid drop forged carbon steel blades. Heat treated, milled face design. Non-slip coated green handles. Blades of quality steel hot drop-forged for sharp edge, long life, rust resistant, and individually hand edged. Cuts straight and wide curves (when trimming light gauge stock); flat face guides tool along straight line. Cuts low carbon cold rolled steel. Cushion grip for comfort.
FatMax 89-862 Angled Solid Joint Diagonal Cutting Plier Mintcraft JL149123L Adjustable Wrenches Superior 02818
Made of drop forged steel with 33 percent larger cutting edge 45 percent less cutting effort required. Lap joint allows for flush cutting while providing knuckle clearance. Comfortable bi-material grip. Made of heat treated, drop forged, chrome vanadium steel. Hardness and torque meets or exceeds ANSI specifications B107.8M. Non slip handle grip. Jaw Opening: 1.04" (26.3mm). Heavy duty cast iron pipe wrench is durable, easy to adjust and use. New, stronger ductile iron material and PowerFlange configuration add additional strength at critical stress areas of the handle. Many parts are interchangeable with other manufacturers? pipe wrenches. Durable epoxy powder coated finish.
Crescent Professional PS20509C Compound Action Linesman Plier PLIER DIAGONAL 8INCH PIVOTPRO GB GC-375 Cable Cutter
Made of Chrome vanadium steel for increased durability. Heat treated joint rivet for smooth and consistent operation. Induction hardened edges for long cutting life. Compound leverage increases cutting power by 50 percent. One third lighter than standard pliers, reduces fatigue. Co-molded grips for added comfort. Unique pivot action design requires 40% less force to cut; unlike standard pliers that pivot on the center-bolt only, additional leverage can be applied. This action creates more leverage and force to the cutting edge; forged steel body for strength and durability; induction hardened cutting edge for long life; dual material grips for added comfort and durability. GB Cable Cutter, NO 2/0 AWG Cable/Wire, 8 in Overall Length, Steel Jaw, Applicable Materials: Copper and Plastic, For Copper Electrical Cables, Plastic Tubing, Battery Cable, Welding Cable, Hoses and Control Cable
Crescent AC212VS Adjustable Wrench Master Magnetics 07562 Chrome Magnetic Tool Holder PLIER LONG NOSE BENT 8IN W/XLT
Wide capacity jaw allows each tool to work with more fastener sizes; wider handle provides more comfort and less stress to the hand; chrome plating for superior resistance to rust and corrosion; increased knurl diameter for easier adjustment and increased load on fastener to reduce slip-off; laser etched scale provides a quick and convenient way to determine fastener size in either SAE or metric; fully polished face. Hold and organize tools in garages, workshops, and work stations. Magnetic tool bar that holds 20# per inch. Easily mounts to walls , studs or workbench. Mounting screws included. 4-color packaging for retail. Features Xtreme Leverage Technology (XLT) for considerably less force required to cut than traditional high leverage designs. The streamlined design is longer for precision handling, while the pipe grip design accommodates many shapes. The angle nose design is ideal for unique situations that require added mobility and control. The streamlined design is sleeker and lighter for easier handling. Made in USA.
Channellock 358 End Cutting Plier Crescent 508CVN/508CV Bevel Cut Nose Side Cutting Linesman Plier Diamond CW12H Chain Wrench
Made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Uses a knife and anvil style cutting edge that is laser heat treated for longer lasting cutting edges. Channellock Blue grips for comfort. Made in USA. Used for electrical work. Made of forged alloy tool steel that is electronically induction hardened, durable and keen side cutting edges, solid joint,  and a polished head. Spring tempered handles with red non slip cushion handle grips. Nickel chrome plated to resist rust. Double action works in both direction; handles have I-beam construction with a 15 inch chain. Can be used in many instances where an ordinary pipe wrench will not fit.
Channellock 911 Cable Cutter Vise-Grip 2078612 Adjustable Wrench Eklind Classic Fold Up Hex Key Set
Made of polished, high carbon, drop forged steel. Broader handles for better leverage and extra comfort; heat treated to hold their edge; cuts up to 4/0 aluminum and 2/0 soft copper. Not for use on steel or ACSR cable. Channellock Blue comfort grips. Made in USA. Made of chrome vanadium with English and metric scales, extra wide capacity and hang hole for easy wall storage. Protouch grips reduce hand fatigue. Meets or exceeds ANSI specifications. Eklind Hex Key Set, Combo, Fold Up, Series: Classic, 23 Pieces, Includes: 9 Keys: 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 in and Classic Steel Handle; 7 Keys: 1.5, 2, 2.5, 3, 4, 5, 6 mm and Classic Steel Handle; 7 Keys: T10, T15, T20, T25, T27, T30, T40 and Classic Steel Handle, Alloy Steel, Black
Channellock GS-1 Tongue and Groove Plier Set Allen 3151 Large Retaining Ring Plier Wiss V19N/V19 Tinners Snip
Made of high-carbon steel for superior performance on the job and electronic coating for rust prevention, reinforcing edge minimizes stress breakage, undercut tongue and groove design won't slip. Right-angle, laser-heat treated teeth grip better and last longer, PermaLock fastener eliminates nut and bolt failure. Channellock Blue grips for comfort. Includes (1) each: 9 1/2" and 6-1/2 Tongue and Groove plier. Made in USA. Made of steel with black oxide finish that resists rust and corrosion. Easily converts for either external or internal use on snap rings. Push button feature allows for effortless change of ring, hex shape locking guides, spring loaded, broached jaws for tip control and stability, ergonomic anti-slip air pocket grips for comfort. Use pliers on most internal snap-rings 3/8 through 2 inches (9.5 through 50.8mm) and external snap rings 1/4 through 2 inches (6.4 through 50.8mm). Includes: (5) five pairs of color-coded tips in sizes 0.036, 0.047 straight and 90 degree and 0.070 straight.  Hex stock size of tips .092". Blades of quality steel, hot drop-forged for sharp edge long life, individually hand edged and rust resistant. Cuts moderately tight curves left, right or straight in light stock. Cuts low carbon cold rolled steel. Cushion grip.
Channellock 447 High Leverage Angled Head Diagonal Cutting Plier Channellock 368 High Leverage Round Nose Linesman Plier Stanley 84-020 Groove Joint Plier
Made of high-carbon steel for superior performance on the job and electronic coating for rust prevention. High leverage, curved diagonal cutting pliers with laser heat-treated cutting edges that last longer. Channellock Blue grips for comfort. Made in USA. Made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Laser heat treated cutting edges uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life. Improved high leverage by moving the rivet closer to the cutter means less force required for cutting. Improved XLT, Xtreme Leverage technology,  uses considerably less force to cut. Useful crushing area and Channellock Blue grips for comfort. Made in USA. Forged steel construction, machined jaws for slip-resistant grip, rust resistant finish, and a double dipped handle for comfort. Meets or exceeds ANSI standards.
Vise-Grip 274103 Pipe Wrench Channellock GripLock Straight Nose Plier Set General Tools MM1E Moisture Meter
Heavy-duty cast iron housing with drop forged jaw that is heat-treated to resist distortion or breakage, hardened teeth, easy spin adjusting nut, hammer head provides flat surface for hammering. I-Beam handle?s wide provides better weight distribution. Made of high carbon steel for superior performance on the job; ergonomically designed offset head for greater leverage; special jaw accommodates many shapes; Channellock Blue Grips for comfort. Made in USA. Detect, locate and identify hidden leaks in wood, concrete, plaster, carpet water leaks in roofs, floors and walls. Provides accurate moisture level readings and are used by home owners, contractors and inspectors. Includes: 9V battery, protective cover.
Crescent 727CVN/727CV Solid Joint End Cutting Nipper Vise-Grip 27 Locking Chain Clamp Channellock 369
Made of forged alloy tool steel that have electronically induction hardened angled cutting edges and blade sizes. Edge type is standard; cut capacity is 12 AWG. Red cushion grip handles have a leverage ratio to blades for easier cutting. Conform to U. S. Federal Specifications GGG-N-350A, Type 1 Class 2, Style A. Made of of high grade heat treated alloy steel, with classic trigger release that provides maximum locking force. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Chain holds and locks around any shape or size; use for awkward shape pieces. Made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Laser heat treated cutting edges uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life. Improved high leverage by moving the rivet closer to the cutter means less force required for cutting. Improved XLT, Xtreme Leverage technology,  uses considerably less force to cut. Useful crushing area and Channellock Blue grips for comfort. Made in USA.
Vise-Grip Fast Release 77T Locking Plier Set Stanley 84-558 Bi-Material Plier Set Eklind 13222 Ball Hex-L Key Set
Easy to open, no-trigger release, hardened teeth designed to grip from any angle to offer one hand operation. The no-slip ProTouch  grip provides comfort and leverage while reducing vibrations and hand fatigue. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Used for tightening, clamping, twisting and turning. Includes (1) one each: 6" Long Nose locking pliers, 10" Curved Jaw locking plier, both with wire cutters and FastRelease. Stanley Plier Set, Bi-Material, 4 Pieces, Includes: 6 in Slip Joint Plier, 6 in Long Nose Plier, 6 in Adjustable Wrench, 8 in Groove Joint Plier, Steel, ANSI Specified, Bi-Material Handle, For Grasping, Bending and Cutting Eklind Ball Hex-L Key Set, Combo, 22 Pieces, Includes: EKL13213 (Long Keys-Sizes 0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in) and EKL13609 (Sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm), 2.8 - 6.8 in Length Arm, L-Shape Handle, Steel, Black, ANSI B18.3, Federal GGG-K-275D
Crescent 193610CVSMN Solid Joint Fence Tool Mintcraft JLO-060 Adjustable Wrenches Eklind 53198 T-Loop Handle Hex Key Set
Made of forged alloy tool steel with polished head, 2 electronically induction hardened durable wire cutters, 2 staple grips in nose, and corrugated hammer head, heavy prong. Special opening in head allows both wire and staple to be gripped. Jaw type is dual head, edge type is standard; cut capacity is 11 AWG. Red non-slip cushion handle grips. Hardened and tempered, drop-forged, heat-treated chrome vanadium alloy steel. Spring-loaded machined knurl, precision-machined jaws. Hardness and torque meets or exceeds B107.8M ANSI Specification. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes inch sizes: 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4, and storage pouch.
Channellock 350S Linesman Square Nose Iron Workers Plier Klein Tools D203-6 Standard Long Nose Plier Crescent Pivot Pro Linesman Plier
Made of high-carbon steel for superior performance on the job and electronic coating for rust prevention; uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life. Laser heat-treated cutting edges, coiled spring, dog leg handle for better leverage when twisting wire, cuts ACSR and has a useful crushing area. Channellock Blue grips for comfort. Made in USA. Induction hardened cutting knives for long life; knurled jaws for sure wrapping and looping; slim head design for working in confined areas; hot-riveted joint ensures smooth action and no handle wobble; curved handles provide greater tool control; plastic-dipped handles for comfort and ease of identification; custom, US-made tool steel. Unique pivot action design requires 40% less force to cut; unlike standard pliers that pivot on the center-bolt only, additional leverage can be applied. This action creates more leverage and force to the cutting edge; forged steel body for strength and durability; induction hardened cutting edge for long life; dual material grips for added comfort and durability; machined, cross-check jaw pattern for gripping.
McDonald 22A Rebar Hickey Wiss W12L Lightweight Snip General Tools 370-6 Horseshoe Shaped Power Magnet
McDonald Rebar Hickey, 34 in Overall Length 3" cut length; sleek head design reduces cutting effort by allowing easy flow of material while cutting; slim nose, ideal for making cuts in tight places and reaching tight corners; large, wide handle loops increase cutting leverage and comfortably fit all hand sizes, including gloved hands; strong and durable lightweight aluminum construction. General Tools Power Magnet, Horseshoe Shaped, 3/16 in Core Hole Diameter Diameter, 1-3/4 in Length, 1-1/8 in Width, 1-1/8 in Height, 30 lb Load Capacity, Alnico, 6 oz Size, For Lifting, Holding, Sorting and Clamping or Retrieving Steel or Iron Parts
Channellock 148-10 End Cutting Plier DeWalt DWHT70273 Fencing Plier Channellock 927 Convertible Internal/External Snap Ring Plier
Made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Uses a knife and anvil style cutting edges hardened for durability. Used on large nails. Channellock Blue grips for comfort. Made in USA. Hammer strike face; staple starter and puller; wire stretcher and splicer; two wire cutters; Chrome vanadium steel for strength and durability; bi-material cushion handle for strong grip and comfort. Heat treated for longer life with a longer, narrow nose for confined areas. Simple conversion between internal and external operations. Heavy duty return spring. Sealed air pocket Channellock Blue grips for comfort. Includes: (5) five pairs of color coded 1/4" to 2", internal-3/8" to 2". includes tips: .036, .047, .070 straight and .036, .047 90 degree. Made in USA.
Master Magnetics 07263 Mini Magnetic Sweeper Klein Tools D228-8 High Leverage Diagonal Cutting Plier Allen 3150 Small Retaining Ring Plier
Clear collected debris with work gloves or a heavy shop towel. Light aluminum housing. Pick up nails, screws, paper clips and any other ferrous metal items in home, shop or office. High-leverage design; rivet is closer to the cutting edge for 36% greater cutting power than other plier designs; short jaws and beveled cutting edges permit close cutting of wire; induction-hardened cutting knives for long life; hot-riveted joint ensures smooth action and no handle wobble; plastic-dipped handles for comfort and ease of identification; custom, US-made tool steel; sku 608.5039 (D228-8) features a heavier design for all-purpose use plus a tapered nose for easy working in confined areas; sku 599.8737 (D248-9ST) designed for soft annealed rebar tie wire. Made of steel with black oxide finish that resists rust and corrosion. Easily converts for either external or internal use on snap rings. Push button feature allows for effortless change of ring, hex shape locking guides, spring loaded, broached jaws for tip control and stability, ergonomic anti-slip air pocket grips for comfort. Pliers fit internal ring sizes 1/4 through 1 inch (6.4 through 25.4mm) and external ring sizes 1/8 through 1 inch (3.2 through 25.4mm). Includes: five (5) pairs of color-coded tips in sizes 0.023 straight, 0.036 and 0.047 straight and 90 degree.  Hex stock size of tips .092".
Channellock 460 Tongue and Groove Plier Channellock 449 Diagonal Cutting Plier H.K. Porter 0890CSJ Shear Cable Cutter
Right angle, laser heat treated teeth made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Undercut tongue and groove design won't slip, reinforcing edge minimizes stress breakage, PermaLock fastener eliminates nut and bolt failure. Channellock Blue grips for comfort. Made in USA. Made of high-carbon steel for superior performance on the job and electronic coating for rust prevention. High leverage, curved diagonal cutting pliers with laser heat-treated cutting edges that last longer. Channellock Blue grips for comfort. Made in USA. High leverage jaws with shear-cut blades; fits into most tool pouches; non-slip grips. This is not an insulated tool, do not use on energized circuits, wire, cable,  cut steel or ACSR.
Klein Tools D203-7 Standard Long Nose Plier Vise-Grip 2078700 Adjustable Wrench Set Channellock 8WCB Adjustable Wrench
Induction hardened cutting knives for long life; knurled jaws for sure wrapping and looping; slim head design for working in confined areas; hot-riveted joint ensures smooth action and no handle wobble; curved handles provide greater tool control; plastic-dipped handles for comfort and ease of identification; custom, US-made tool steel. Professional grade tools; "ProTouch" grips provide extra comfort and reduces hand fatigue; machined jaws for maximum gripping strength; induction hardened cutting edge stays sharper longer; set includes (1) 6" adjustable wrench and (1) 10" adjustable wrench. Same capacity as a 12" wrench; longer jaws grip better, avoiding slippage or nut round off; measurement scales (inches on front; mm on reverse) are handy for sizing nuts, pipe and tube diameters; 4 thread knurl and non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces; "Code Blue" grips are designed for durability and comfort.
Ergo-Fold 25024 Ergonomic DeWalt DWHT70486 Push-Lock Plier Set Klein Tools D248-8 Angled Head Diagonal Cutting Plier
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a ergonomic handle. Includes the following 3 sets: (9) piece hex key, inch sizes,.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, and 3/16, (7) piece metric hex key, MM Sizes: 1.5, 2, 2.5, 3, 4, 5, and 6, and (8) piece torx sizes: T8, T10, T15, T20, T25, T27, T30, and T40. Carded Slim head design fits into tight places; push-lock technology with 17 locking positions for faster jaw adjustment; V-jaw design for multi-purpose gripping; induction heat treated jaws for extra durability; bi-material cushion handle for strong grip and comfort; set includes (1) 8" and (1) 10" locking plier. High-leverage design; rivet is closer to the cutting edge for 36% greater cutting power than other plier designs; short jaws and beveled cutting edges permit close cutting of wire; induction-hardened cutting knives for long life; hot-riveted joint ensures smooth action and no handle wobble; plastic-dipped handles for comfort and ease of identification; custom, US-made tool steel; sku 608.5039 (D228-8) features a heavier design for all-purpose use plus a tapered nose for easy working in confined areas; sku 599.8737 (D248-9ST) designed for soft annealed rebar tie wire.
Channellock 85 Fence Tool Channellock 812W Adjustable Wrench Crescent 728CVN/728CV Solid Joint End Cutting Nipper
Made of high-carbon steel. Hammer on jaw, staple starter and puller and wire stretcher, splicers and 2 cutters. Channellock Blue grips for comfort. Made in USA. Made of chrome vanadium steel with 4 thread knurl and non-protruding jaws that provide greater capacity; minimal head width improves performance in confined spaces. Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters. Made of forged alloy tool steel that have electronically induction hardened angled cutting edges and blade sizes. Edge type is standard; cut capacity is 12 AWG. Red cushion grip handles have a leverage ratio to blades for easier cutting. Conform to U. S. Federal Specifications GGG-N-350A, Type 1 Class 2, Style A.