Home > STRIKING AND CUTTING TOOLS > HANDLE WEDGES AND ACCESSORIES
Choose a sub category:
WRECKING BARS PRY BARS AND PULLERS PINCH BARS
NAIL & TACK PULLERS NAIL SETS COLD CHISELS
PUNCHES & DRIFTS COLD CHISEL/PUNCH SETS HOLE PUNCHES
AWLS AND BRAD DRIVERS
Sort By:
1
Stanley 58-111 Nail Set Stanley 58-112 Square Nail Set Stanley 58-113 Square Nail Set
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down. Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down. Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
Mintcraft JL-CSL0143L  Center Punches Mintcraft JL-CSL016  Center Punches Stanley 58-911 Square Nail Set
Made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. Made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
Stanley 58-912 Square Nail Set Stanley 58-913 Square Nail Set Dasco 530-0 Center Punch
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas. Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas. Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
Dasco 402-0 Cold Chisel Dasco 531-0 Center Punch Dasco 539-0 Prick Punch
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
Dasco 540-0 Prick Punch Toolbasix JLO-0323L  Tack Pullers Mintcraft JL-CSL003  Cold Chisels
Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points. Made of heat treated carbon steel blade with a square plastic handle. Made from chrome alloy steel material that is drop forged and heat treated. Baked enamel finish Heavy duty, hex shank.
Mintcraft JL-CSL0173L  Center Punches Dasco 400-0 Cold Chisel Dasco 401-0 Cold Chisel
Made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
Dasco 405-0 Cold Chisel Dasco 541-0 Prick Punch Dasco 592-0 Pin Punch
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Toolbasix JLO-0243L  Scratch Awls Stanley 16-286 Cold Chisel Dasco 581-0 Pin Punch
Hardened and tempered steel blade with high impact plastic handle. Can be used to start holes in soft wood and scribe or mark wood or other soft metals. Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 582-0 Pin Punch Dasco 532-0 Center Punch Wonder Bar II 55-045 Flat Pry Bar
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Made with tempered steel and heat treated for increased durability. Able to withstand a bending momentum of 310 in-lbs with a high-visibility. Powder coated finish.
Mintcraft JL-CSL0043L  Cold Chisels Vaughan & Bushnell 222 Double Ended Mini Pry Bar Stanley 16-287 Cold Chisel
Made from chrome alloy steel material that is drop forged and heat treated. Baked enamel finish Heavy duty, hex shank. High quality tempered steel. Rust-resistant powder coat finish. Rocker head provides additional leverage. Beveled nail slots. Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets.
Mintcraft JL-CSL005  Cold Chisels Dasco 406-0 Cold Chisel Dasco 583-0 Pin Punch
Made from chrome alloy steel material that is drop forged and heat treated. Baked enamel finish Heavy duty, hex shank. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 584-0 Pin Punch Stanley 16-288 Cold Chisel General Tools 806 Jiffy Self-Center Punch
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Hardened steel pin, knurled body provides no slip grip, auto centering, and countersunk end. Used for creating starter screw holes.
Dasco 562-0 Starter Punch Dasco 588-0 Pin Punch Mintcraft JLO-0193L Pry Bars
Dasco Starter Punch, Drop Forged Steel Body, 5-1/2 in Overall Length, 3/32 in Overall Width, Used to Loosen Frozen Pins and Keys Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Made from dropped forged, heat treated steel  with nail slots at both ends for easy access and leverage.
Dasco 589-0 Pin Punch Dasco 534-0 Center Punch Mintcraft JL-CSL006  Cold Chisels
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Made from chrome alloy steel material that is drop forged and heat treated. Baked enamel finish Heavy duty, hex shank.
Dasco 253-0 Roll Pin Punch Dasco 408-0 Cold Chisel Dasco 431-0 Scratch Awl
Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. One piece forged all American steel design tool features heat treated point for long life. Designed to start holes in soft wood and scribe or mark wood and other soft materials such as cardboard.
Dasco 564-0 Solid Punch Dasco 565-0 Solid Punch Dasco 566-0 Solid Punch
Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal. Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal. Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
Dasco 590-0 Pin Punch Stanley 69-122 Scratch Awl Stanley 58-230 Square Head Nail Set
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Heat treated and plated alloy steel blades hold up to repeated use and are corrosion resistance. Chrome plated steel ferrule for added strength. Bright, smooth finish on bar. Machined hardwood handle. Bar diameter 3/16";  length 3-3/8". Made of hardened and tempered alloy steel with square head, round knurled body; tips are cupped and chamfered. Square head prevents rolling; 4" inches long. Set contains (1) each: 1/32", 1/16", and 3/32".
Mintcraft JLO-0093L  Pry Bars General Tools 1280 Hollow Punch Great Neck Saw BD1 Magnetic Brad Nail Driver
Made of dropped forged and heat treated steel with hexagon steel construction for enhanced strength. Single claw tool. The punch works on leather, rubber, gasket material, cardboard and softer metals; the internal punch features a side clearance hole for easy removal of punched material; the punches are heat treated forged steel, ensuring long lasting performance; the cutting edge will stay sharper longer because of the heat treatment. Magnetic brad and nail driver with solid wood handle and spring action shaft. Drives finishing nails up to 1-1 /2" long without marring surface. Downward pressure on handle inserts nail.
Dasco 568-0 Solid Punch Dasco 337-0 Utility Chisel General Tools 1280 Hollow Punch
Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal. Made from forged high grade American steel and heat treated to meet or exceed ANSI specifications. Larger "Targethead" striking area reduces mushrooming from repeated blows. Can be used for all around masonry for cutting, trimming and wedging. General Tools Hollow Punch, Series: 1280, 1/8 in Tip, 0.28 in Stock, 4 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
General Tools 1280 Hollow Punch Dasco 255-0 Roll Pin Punch Hyde Tools 45600 Pry Bar/Scrapers 20 16
General Tools Hollow Punch, Series: 1280, 3/16 in Tip, 0.38 in Stock, 4 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft. Use to remove molding, open boxes, scrape paint and pull nails. High-carbon steel hardened and tempered, curved ground scraping end with nail slot. Fits easily into tool boxes or pouches.
Dasco 441-0 Long Cold Chisel General Tools 1280 Hollow Punch Vaughan & Bushnell BT90 90 deg Double Ended Pry Bar
Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access.  Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. The punch works on leather, rubber, gasket material, cardboard and softer metals; the internal punch features a side clearance hole for easy removal of punched material; the punches are heat treated forged steel, ensuring long lasting performance; the cutting edge will stay sharper longer because of the heat treatment. Made from forged spring tempered steel with a 90 degree blade. Used for prying, pull nails, molding, and scraping.
Dasco 258-0 Roll Pin Punch Crescent FB7 Flat Pry Bar General Tools 1280 Hollow Punch
Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying. General Tools Hollow Punch, Series: 1280, 5/16 in Tip, 1/2 in Stock, 4-3/32 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
General Tools 1280 Hollow Punch PRY BAR DBL END NAIL PLLR 11IN Dasco 413-0 Cold Chisel
General Tools Hollow Punch, Series: 1280, 1/4 in Tip, 0.44 in Stock, 4 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More Made from drop forged and heat treated steel with hexagon steel construction for strength. Use for precision nail pulling and prying. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
General Tools 1280 Hollow Punch Wonder Bar 55-515 Flat Pry Bar Estwing HC-10 Single Ended Handy Claw
General Tools Hollow Punch, Series: 1280, 3/8 in Tip, 0.6 in Stock, 4-13/64 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More Made from forged, heat treated, high-carbon steel with polished and beveled cutting edges. Contoured bar makes pulling nails, prying, lifting and scraping easier. Beveled nail slot at both ends. High visibility, powder coated finish. Made from drop forged hard steel with a vinyl grip. Removes imbedded nails.
Dasco 417-0 Cold Chisel Stanley 16-291 Cold Chisel Stanley 58-930 Cushion Grip Nail Set
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Stanley Nail Set, Cushion Grip, 3 Pieces, Includes: 58-911 Model 1/32 in Nail Setter, 58-912 Model 2/32 in Nail Setter and 58-913 Model 3/32 in Nail Setter, Steel, Assorted
Dasco 606-0 Drift Punch Dasco 91 Pry Bar Kit With Nail Puller Dasco 410-0 Long Cold Chisel
Made of heat treated high carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Targethead" render long service. Ideal for pulling trim, molding, baseboards, nails, scraping and cleaning flat surfaces; straight and curved blades with nail pullers; made from high carbon U.S.A. steel with full penetration heat treated for superior strength; kit includes (1) of each: 9" pry/trim/scraper bar, 5-1/2" Lil pry bar and 7-1/2" Ultra pry bar. Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access.  Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
Dasco 415-0 Long Cold Chisel Dasco 419-0 Long Cold Chisel Estwing HB-15 Double Ended
Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access.  Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access.  Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Bar is forged half round, for added strength and less weight with wide, thin blade for easy prying.
Mintcraft JL-CSL008  Cold Chisels General Tools 72 Revolving Punch Plier Crescent FB13 Flat Pry Bar
Made from chrome alloy steel material that is drop forged and heat treated. Baked enamel finish Heavy duty, hex shank. Spring tensioned, self opening tool made of plated steel with cushioned vinyl grip with revolving turret that has six hardened steel punches: 5/64", 3/32", 7/64", 1/8", 5/32", and 3/16"; used to make tiny holes in leather, plastic, rubber, canvas, and other lightweight materials. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying.
General Tools 1280 Hollow Punch Dasco 603-0 Drift Punch Stanley 55-033 Single Ended Nail Claw
General Tools Hollow Punch, Series: 1280, 7/16 in Tip, 0.67 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More Made of heat treated high carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Targethead" render long service. Heat treated for durability with a special extracting claw and a beveled nail slot.
DeWalt DWHT58503 4-In-1 Dasco G337 Utility Chisel General Tools 1280 Hollow Punch
Interchangeable tip for convenience; hexagonal head prevents rolling and can be used as a standard drill chuck ? nail set doubles as drill extension; knurled locking collar for easy nail release and reversal; accepts standard screwdriver bits for versatility; long, beveled tip for easy nail head alignment; fully hardened, precision-milled steel for long life. Set includes: (1) each: 1/32?, 2/32?, 3/32? and #2 point Phillips. Dasco Utility Chisel, 1-1/4 in Tip, Flat Tip, 12 in Overall Length, High Carbon Steel, Comfortable Grip Handle, Plastic Handle, ANSI Specified, For Cutting or Shaping Brick, Cement Block, Cinder Block or Trimming Excess Mortar General Tools Hollow Punch, Series: 1280, 1/2 in Tip, 3/4 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
General Tools 1280 Hollow Punch General Tools 1271 Arch Punch General Tools 1271 Arch Punch
General Tools Hollow Punch, Series: 1280, 9/16 in Tip, 0.82 in Stock, 4-39/64 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More General Tools Arch Punch, Series: 1271, 1/4 in Tip, Circular Tip, 0.31 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal General Tools Arch Punch, Series: 1271, 3/8 in Tip, Circular Tip, 1 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
General Tools 1280 Hollow Punch Vaughan & Bushnell NP12G Single Ended Nail Puller With Grip Stanley 16-298 Cold Chisel Set
General Tools Hollow Punch, Series: 1280, 5/8 in Tip, 0.87 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More Made of high carbon steel to extract deeply embedded nails with claws that are hardened and tempered and a cushion grip handle. Blue, rust resistant finish. Made of one piece forged chrome vanadium steel. Hardened, quenched and tempered for long life and safety. Powder coat finish for increased visibility. Set contains (1) each:  3/8", 1/2" & 5/8".
FatMax 16-332 Handguarded Cold Chisel General Tools 70079 Utility Center Punch Dasco 134-0 Double Ended Nail Claw Bar
Made with offset blade and shorter bite for increased leverage; bi-material hand guard; used for cutting and shaping wrought iron, cast iron, steel, brass, bronze, copper, aluminum, bolts, nuts and rivets. Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling, one handed operation, no hammer needed. Forged of high carbon heat treated American steel with 30 degree angled end for fast starting, positive grip and a 90 degree end for close leverage; features a variety of nail pulling slots, Sharp V slots bite in the nail shank for easy nail removal. Blue rust resistance finish.
Stanley 55-116 Double Ended Stanley 55-113 Double Ended Precision Claw Bar Crescent MB8 Pry Bar
Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying. Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying.
Dasco 134 Double End Nail Puller Dasco G410 Cold Chisel General Tools 1271 Arch Punch
Dasco Nail Puller, Double End, 10-1/2 in Overall Length, Heat Treated High Carbon Steel, Blue, Rust Resistant, For Prying and Removing Nails Dasco Cold Chisel, 3/4 in Tip, 12 in Overall Length, High Carbon Steel, Comfortable Grip Handle, Plastic Handle, ANSI Specified, For Cutting or Shaping Brick, Cement Block, Cinder Block or Trimming Excess Mortar General Tools Arch Punch, Series: 1271, 1/2 in Tip, Circular Tip, 1 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
Dasco 22 Pin Punch Kit Vaughan & Bushnell BC8 Bear Claw Double Ended Bear Claw Nail Puller Dasco 44 Cold Chisel Kit
Made of heat treated, high carbon American steel. Used for driving and removing pins and keys. Includes (1) each Nos: 562 3/32" x 5-1/2" Starter Punch, 582 1/8" x 5-1/2" Pin Punch, 583 5/32" x 5/1/2" Pin Punch, 584 3/16" x 5-1/2" Pin Punch, 589 1/4" x 6" Pin Punch and 592 1/16" x 4/12" Pin Punch. Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish. Heat treated, high carbon American steel. "Targethead" design increases striking area reduces spalling and mushrooming. One Each Nos.: 401 5/16" x  5-1/4" Cold chisel, No. 406 5/8" x  6-3/4" Cold chisel and No. 408 3/4" x 7-1/8" Cold chisel; to be used on cast iron, wrought iron, steel, bronze and copper.
Dasco G419 Cold Chisel DeWalt DWHT55518 Double Ended Flat Pry Bar Stanley 55-117 Double Ended
Dasco Cold Chisel, 1 in Tip, 12 in Overall Length, High Carbon Steel, Comfortable Grip Handle, Plastic Handle, ANSI Specified, For Cutting or Shaping Brick, Cement Block, Cinder Block or Trimming Excess Mortar Spring steel for strength and durability; extra wide prying end for leverage and pry surface; pointed beveled end for penetration and nail pulling; multiple nail pullers for flexibility and nail removal. Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying.
Stanley 55-114 Double Ended Precision Claw Bar Wonder Bar X21 55-526 Flat Pry Bar Stanley 16-226 Pin Punch Set
Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying. Made from forged, high-carbon steel, long reach for greater leverage in nail pulling, lifting or prying. High visibility, powder coated finish. Made from one piece forged chrome vanadium steel that is hardened, quenched and tempered for long life. Powder coat finish for increased visibility. 6" long. Includes (1) each: 1/16", 1/8", 5/32", 3/16", 1/4" & 5/16" points.
General Tools 1271 Arch Punch PUNCH REVOLVING HEAVY DUTY    Vaughan & Bushnell BC9 Bear Claw Double Ended Bear Claw Nail Puller
General Tools Arch Punch, Series: 1271, 5/8 in Tip, Circular Tip, 1.31 in Stock, 5 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal For punching round holes in leather, plastic, rubber, canvas, cardboard and similar materials; special compound joint design requires less effort than other punch pliers; spring tension, self-opening revolving punch; six tapered, hollow, hardened steel, non-clogging punches; plastic grips for comfort and control. Punch sizes: 5/64", 3/32", 7/64", 1/8", 5/32" and 3/16". Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish.
Superbar B215 Double Ended Pry Bar Super Wonder Bar 55-525 Contoured Pry Bar Vaughan & Bushnell MLB Molding Lifter Bar
Made from forged spring tempered steel for heavy duty use with three beveled nail slots; polished, sharp blades for easy insertion. Used for prying molding, scraping and pulling nails. Blue coated finish. Made from forged, heat treated, high-carbon steel  with polished, beveled cutting edges. Arched center gives more swing during nail pulling; tight radius on bend angle aids in positioning bar. Extended tongue improves grip and reach, can be used as a foot levered, hands free panel lift. High visibility, powder coated finish. Made from forged, tempered steel, with wide, sharp blades that slip easily under molding and baseboard; curved ends for leverage. Chrome plated finish.
Crescent FB15 Flat Pry Bar Stanley 55-035 Double Ended Nail Puller General Tools 87 Center Punch
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying. Heat treated for durability with a double end, 90 degree and 30 degree, puller and  fully sharpened claw tips. Provides accurate center punches without drill bit traveling, one handed operation, no hammer needed; spring tension impact adjustments for working with lighter materials, replaceable hardened steel point, and black oxide finish preventing rust.
Vaughan & Bushnell BC10 Bear Claw Double Ended Bear Claw Nail Puller Crescent MB10 Pry Bar General Tools 1271 Arch Punch
Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying. General Tools Arch Punch, Series: 1271, 3/4 in Tip, Circular Tip, 1-1/2 in Stock, 4-3/4 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
Vaughan & Bushnell NP12DE Double Ended Nail Puller Superbar B215L Double Ended Pry Bar DeWalt DWHT55528 Double Ended
Made of high carbon steel to extract deeply embedded nails with claws that are hardened and tempered. Blue, rust resistant finish. Made from forged spring tempered steel for heavy duty use with three beveled nail slots; polished, sharp blades for easy insertion. Used for prying molding, scraping and pulling nails. Blue coated finish. Spring steel for strength and durability; extra wide prying end for leverage and pry surface; pointed beveled end for penetration and nail pulling; multiple nail pullers for flexibility and nail removal.
Vaughan & Bushnell BC/SB10 Bear Claw Scraper Bar Dasco 30 Punch and Chisel Kit Stanley 55-115 Double Ended Precision Claw Bar
Made from forged, tempered steel with wide, thin, sharp blades for scraping and cutting and a rocker head for maximum leverage. Made of heat treated, high carbon American steel. Set contain (1) each:  Nos.: 402 3/8" x 5-5/8" Cold chisel, 406 5/8" x 6-3/4" Cold chisel, 532 7/16" x 5" Center Punch, 562 5-1/2" Long Starter Punch and 582 1/8" x 5-1/2" Pin Punch. Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying.
Crescent MB12 Flat Pry Bar General Tools 1271 Arch Punch General Tools 1271 Arch Punch
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying. General Tools Arch Punch, Series: 1271, 7/8 in Tip, Circular Tip, 1-1/2 in Stock, 5 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal General Tools Arch Punch, Series: 1271, 1 in Tip, Circular Tip, 1.63 in Stock, 5 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
Vaughan & Bushnell BC12 Bear Claw Double Ended Bear Claw Nail Puller General Tools 77 Center Punch General Tools 1271 Arch Punch
Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish. Lightweight aluminum body with alloy steel internal components, provides accurate center punches without drill bit traveling, one handed operation, no hammer needed, spring tension impact adjustments for working with lighter materials. Made of heat-treated forged steel; inside taper for clearance; ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials.
Estwing PB-18 Lightweight Pry Bar 18 in L Vaughan & Bushnell BC13 Bear Claw Double Ended Bear Claw Nail Puller General Tools 79 Center Punch
Made from tempered, forged steel; one piece I-Beam construction for strength, lightweight with a rocking head for leverage and a beveled nail slot. Baked enamel finish. Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish. Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-walled tubing. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. Used for punching, marking and staking and hardened steel point is replaceable.
Vaughan & Bushnell BC14 Double Ended Bear Claw Nail Puller Dasco 11 Roll Pin Punch Kit Crescent DB18X Flat Indexing Pry Bar
Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish. Made of heat treated high carbon American steel. Used for driving and removing pins, keys, etc.; machined from high carbon steel; set contains (1) of each: 1/8", 5/32", 3/16", 7/32", 1/4" and 5/16". Head indexes over 180 degrees and locks into 16 positions for increased access 90 degree flat head offers better access and wider support for prying against surfaces; striking pas assists users with penetration and prying.
General Tools 1271 Arch Punch Dasco 88 Punch and Chisel Kit Crescent DB30X Flat Indexing Pry Bar
Made of heat-treated forged steel; inside taper for clearance; ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials. Contains 5/16", 5/8", 3/4" cold chisels; 1/16", 1/8", 5/32", 3/16", 1/4", 5/16" pin punch; 1/4" center punch; 3/8" prick punch and 7" scratch awl; scratch awl is ideal for starting screw holes; cold chisels are used for cutting and shaping metal that is softer than the cutting edge; pin punches are used to remove a pin or key; center punches are used for making accurate hole starting easier and prick punches are used to mark and scribe work pieces. Made of high carbon heat treated American steel. Head indexes over 180 degrees and locks into 16 positions for increased access 90 degree flat head offers better access and wider support for prying against surfaces; striking pas assists users with penetration and prying.
Crescent DB16 Adjustable Multi-Functional Pry Bar With Nail Pull General Tools SPC76 Drive Pin Punch Set General Tools Professional Center Punch
Multi-functional utility bar for both demolition and renovation projects; adjustable jaws for straightening, pulling and prying, crow bar end, nail extractor and striking head; extendable jaws quickly allows you to pull, pry or straighten any board up to 5.5" or increase the access and force of the nail extractor. General Tools Drive Pin Punch Set, 5 Pieces, Hardened Steel, Conforms to Gov. Specs,GGG-P-831E General Tools Center Punch, Automatic, Heavy Duty, Series: Professional, Steel, Black Oxide, Includes: Threaded, Replaceable Steel Point, For Marking and Staking the Toughest Metals
General Tools 1271 Arch Punch General Tools SPC75 Drive Pin Punch Set General Tools 1271 Arch Punch
General Tools Arch Punch, Series: 1271, 1-3/8 in Tip, Circular Tip, 2-1/2 in Stock, 5-3/4 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal General Tools Drive Pin Punch Set, 8 Pieces, Includes: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 5/16 in Punches, Hardened Steel, Gray General Tools Arch Punch, Series: 1271, 1-1/2 in Tip, Circular Tip, 2.63 in Stock, 6 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
Dasco 132 Double Ended Nail Claw Bar Vulcan 32939 Pinch Point Bars Crescent DB24 Adjustable Multi-Functional Pry Bar With Nail Pull
Forged of heat treated, high carbon American steel with a 90 degree claw and a bevel sharpened ripping blade; features a variety of nail pulling slots, Sharp V bite in the nail shank for easy nail removal. Blue enamel finish. Drop forged and heat treated for added strength during prying, digging and tamping. Multi-functional utility bar for both demolition and renovation projects; adjustable jaws for straightening, pulling and prying, crow bar end, nail extractor and striking head; extendable jaws quickly allows you to pull, pry or straighten any board up to 5.5" or increase the access and force of the nail extractor.
Vulcan 32937 San Angelo Bars Vaughan & Bushnell 4420 Lightweight Pry Bar Stanley 93-310 Board Bender Deck Tool
Drop forged and heat treated for superior strength during prying, digging and tamping. Hexagon steel construction for enhanced strength, one inch blade width. Made from high tension heat treated tubular steel. Heads are drop forged and heat treated for extra strength. Used in demolition and prying applications. Chrome plated to prevent rust. Made of extra heavy duty carbon steel with 5/8" high-carbon steel bar. Use the hook on joists and push handle down to squeeze boards tight, or use to straighten decking or joists. The cushioned handle is designed for kneeling to maintain pressure; frees both hands for nailing.
Vulcan 32940 Pinch Point Bars Vulcan 32938 Wedge Point Bars Crescent 56 Nail Puller
Drop forged and heat treated for added strength during prying, digging and tamping. Drop forged and heat treated for superior strength during prying and tamping. Made from a forged alloy, hardened and tempered jaw, box-joint and 24 inch full extension. Black enamel finish. Conforms to U.S. Fed. Spec. GGG-P-79lb, Type 1, Class-1.
Vaughan & Bushnell 222CS Double Ended Mini Pry Bar General Tools 1271ST Arch Punch Set
High quality tempered steel. Rust-resistant powder coat finish. Rocker head provides additional leverage. Beveled nail slots. General Tools Arch Punch Set, Round Tip, 7 Pieces, Includes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8 and 1 in Cutter Diameter, Heat Treated Forged Steel, Black, For Punching Holes in Leather, Rubber, Gasket Material and Soft Metals
   
 
1