Home > SPORTING GOODS > MARINE, HUNTING & CAMPING > MARINE/BOATS & ACCESSORIES
Choose a sub category:
MARINE ACCESSORIES DOCK KITS/DOCK HARDWARE
Sort By:
1
BACK PLATE COMM GRAD .25X1.5X5 PIPE SAFETY CAPS 4PIEC 1.5X3X3 GUSSET COMMER GRADE .25X1.25X8
Heavy duty hot dipped galvanized washer. Fits 1 5/8" outside diameter pipe. Packaged in set of 4. Reinforces inside corners.
DOCK CONNECTOR CLIPS STAN GALV CLEAT DOCK RESIN 1.5 X 1 X8 IN Playstar PS 1015 Joist Corner Bracket
Use to connect roll in and stationary dock sections. 8" cleat with large tie off area. Mounts with two screws (Not Included). Reinforces and supports frame.
FLOATNG DCK PIPE SLEEV STANDRD Playstar PS 1412 Standard Duty Inside Corner Bracket Playstar PS 1145 Dock Float Hardware
Fits 1 5/8" outside diameter pipe. Powder coated steel reinforces dock frame corners. Hot-dipped galvanized for long life. Includes enough screws and washers to attach 3 PlayStar marine dock floats to frames. Contains twelve 3/8" x 2" lag screws and twelve 3/8" flat washers.
MOORING RING 3 IN HVY DTY GALV Playstar PS 1135 Dock Frame Hardware RING LIFTNG SM MARINE 1-1/2 IN
3" heavy duty ring. Hot dipped galvanized for long life. Hot-dipped galvanized for long life. Includes fasteners for use with PlayStar's Framing Kits, Hinge Kits, and Pipe Sleeves. Contains twelve 3/8"-16 x 3" carriage bolts, twelve 3/8" flat washers, twelve 3/8" lock washers, and twelve 3/8" nuts. Pre-drilled to accommodate four #6 screws. Durable chrome plated brass ring is small enough to fit on most hatches, cabinets and drawers.
DOCK CONNCTR CLIP 5 X 7.25 X 5 Playstar PS 1011 Inside Corner Bracket FOOT PLATE COMM GRADE 2.25X6X6
Securely attaches stationary and roll in docks. Hot dipped galvanized for long life. Hot dipped galvanized for long life.  Prevents twisting and bending. Fits 1 5/8" and 1 7/8" diameter pipe.
BUMPER TORPEDO FOAT 5.7X5.7X17 AIR HORNS SIGNAL MARINE 1.4 OZ FLOATING DOCK AUGER STANDARD
Inflatable. For use on boats. Protects all sizes of boats. Recommended for boats up to 12 meters/39.4 feet. Non-flammable, no CFC'S. Good for over 80 blasts. Ideal for marine safety sporting events. Easily, and securely, anchors dock pipe to bottom. One piece, heavy-duty cast iron construction securely fastens to pipe with single stainless steel nut and bolt. Hot dipped galvanized for long life. Use with No.PS1080 Commercial Grade pipe sleeve. For use with 1-5/8" O.D. and 1-7/8" O.D. dock pipe.
Playstar PS 1013 Outside Corner Bracket 5 in L x 8 in W x 8 in H DOCK BUMPER MULT PUR 2.5X15.76 FLOATING DOCK PIPE SLEEVE 2 PC
Hot dipped galvanized for long life.  Securely ties frame together. Easily installs on any dock. Mount horizontally or vertically. Protects against nicks and scratches. Holds dock in place while accommodating changing water levels. Two-Piece construction allows pipe to be left in water if dock is removed. Removable insert for various pipe sizes. Accommodates standard 1-5/8" and 1-7/8". O.D. schedule 40 pipe.
DOCK HINGE KIT FLOATING MARINE AIR HORNS SIGNAL MARINE 8 OUNC PIPE SLEEVE BUMPR 3.75X4.75X14
Allows modular connections for working with smaller, lighter dock sections. Connects floating sections together quickly and easily with clevis pin of male/female assembly that bolts to frame kit hole pattern or wherever desired with No.PS1135 hardware kit. Heavy-gauge, hot dipped galvanized steel for long life. Includes male clevis, female clevis, and clevis pin with clip. Recommended for boats up to 12 meters/39.4 feet. Non-flammable, no CFC'S. Good for over 80 blasts. Ideal for marine safety sporting events. Fits PlayStar commercial grade and standard pipe sleeves. Easily adjusts without removal.
DOCK WHEEL KITS 23 IN DIAMETER DOCK KIT STANDARD 4X6 PLAYSTAR DOCK FLOAT POLY HOLLOW 48X36X9
Makes installation and removal of your dock easy with less effort. 23'' diameter wheel with 1-5/8'' diameter hub. For use with dock axle kit. Builds 4' x 6' wood dock frame. Powder coated bracket ties 2' x 6' wood frame together for roll or stationary in dock sections. (Lumber and screws sold separately). Highly engineered, easy to handle design with large surface area for stability. Built to withstand damaging agents of gas, oil, salt water, and UV light. One-piece design with no seams to leak. Made of environmentally friendly, maintenance-free, automotive-grade fuel-tank, high-density polyethylene. Accessible flanges for easy mounting to frame with No.PS1145 hardware kit. Supports from 33.20 lbs. submerged to 1" to 500.00 lbs. submerged 9".
AIR HORN REFILL MARINE 8 OUNCE DOCK AXLE KIT 4 X 24.75 X 5.25 DOCK LADDER ADJ RESIN HVY DUTY
Recommended for boats. Makes dock installation and removal easy. Kit contains 4 axle brackets, 2 stabilizer braces, 2 nylon axle sleeves and 2 U-Straps. Use with PlayStar dock wheels. Dock pipes required. (Purchased Separately). Resin dock ladder with hot-dipped galvanized mounting brackets and hardware. Adjusts to 4 step (36'') or 5 step (47'') to fit your application. 20'' extra wide opening. Will not crack, fade or rust. No sharp edge. Stays cool to the touch. Easy to install. Tall arch design for stable climbing. Ergonomic hand rails for secure no-slip grip. Deep steps with ribbed surface ensures traction. Made in America. 350 lb. weight rating.
DOCK KT COMM GRADE 4X10 PLYSTR DOCK TOP RESIN 26.75X25.7X10.5 DOCK KIT ALUMINUM 4X10 PLAYSTR
Builds 4' x 10' wood dock frame. Heavy duty, hot dipped galvanized components securely ties 2' x 6' wood frame together for stationary, roll in or floating dock sections. (Lumber, screws and components sold separately) Ten 2' x 2' interlocking panels for a 4' x 10' dock section. Maintenance free with slip resistant surface. Use with Commercial Grade or Aluminum Dock Frame Kits. Contains everything needed to assemble a 4' x 10' aluminum dock frame. Sleek design is made with a strong tempered alloy. Lightweight and durable, each section weighs less than 200 lbs. Can be combined with Resin Dock Top for the quickest assembly. Available as stationary, roll in or floating. Support components sold separately.
   
 
1