Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES
Choose a sub category:
GAS VALVES NEEDLE VALVES HOSE BIBBS
BOILER DRAINS STOP VALVES STOP & WASTE VALVES
GLOBE VALVES WATER SUPPLY LINE VALVES BALL VALVES
GATE VALVES CHECK VALVES FOOT VALVES
SILLCOCKS FROSTPROOF SILLCOCKS YARD HYDRANTS
VALVE/SILLCOCK HANDLES VALVE BOXES & COVERS MISC VALVES & FITTINGS
Sort By:
1
World Wide Sourcing PMB-042 Sillcock Handle Mueller ProLine In-Line Check Valve Mueller ProLine In-Line Check Valve
WORLDWIDE SOURCING Sillcock Wheel Handle, Suitable For Use With: 13/32 in Round 12 Point Stem, Zinc, 1-3/4 in Dia Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
Danco 80416 Square Broach Valve Wheel Handle Danco 80417 Round Broach Valve Wheel Handle World Wide Sourcing PMB-041 Sillcock Handle
Danco Valve Wheel Handle, Square Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel Danco Valve Wheel Handle, Round Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel WORLDWIDE SOURCING Sillcock Wheel Handle, Suitable For Use With: 0.4 - 0.35 in Square Stem
Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve Plumb Pak PP20611 Round Sillcock Faucet Handle
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. 12 point
Plumb Pak PP28601 Square Stem Wheel Sillcock Faucet Handle B and K Industries 888-221RP Bleeder Caps World Wide Sourcing PMB-441 Hose Bibb Handle
Plumb Pak Sillcock Faucet Handle, Square Stem, Wheel, 1-3/4 in Width Fits most drainable valves. 3 styles of caps with washers included. WORLDWIDE SOURCING Hose Bibb Handle, For T-Handle Lawn Faucet
Plumb Pak PP806-11 Sillcock Faucet Handle Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Quarter Turn Solvent Ball Valve
12 point Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant.
Plumb Pak PP806-1 Sillcock Faucet Wheel Handle NDS EBV-0500-S 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-0500-T 1-Piece Economy Full Port In-Line Ball Valve
Plumb Pak Sillcock Faucet Wheel Handle, Suitable For Use With: 1/4 in Square Stems Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
Mueller 107-634 Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve NDS SCP-0500-S Stop Valve
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. PVC construction. For use in hot or cold fluid systems up to 140 degrees Fahrenheit. White color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards.
Plumb Pak PP10-8SN Coin Air Valve NDS SCP-0750-S Stop Valve NDS BDM-0500-T Boiler Drains
Valve is operate by a coin or screwdriver. PVC construction. For use in hot or cold fluid systems up to 140 degrees Fahrenheit. White color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. For hot and cold fluid systems up to 180 degrees Fahrenheit. Non-corroding, heavy-duty Calcon construction for use with corrosive fluids. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. IAPMO and NSF Listed.
NDS BDM-0750-T Boiler Drains NDS EBV-0750-S 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-0750-T 1-Piece Economy Full Port In-Line Ball Valve
For hot and cold fluid systems up to 180 degrees Fahrenheit. Non-corroding, heavy-duty Calcon construction for use with corrosive fluids. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. IAPMO and NSF Listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
B&K Proline Solvent Stop Valve Plumb Pak PP806-10 Sillcock Faucet Handle Mueller ProLine In-Line Check Valve
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61. 16 point Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
Mueller ProLine Quarter Turn Ball Valve KBI DF-0750-T Chemical Resistant Drum Faucet NDS SCL-0500-T Stop Valve
For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. 3/4"MPT polyethylene drum faucet. Low friction bearing surface allows for easy open and close. Bulk. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards.
KBI HBF-0750-T Washerless Sillcock and Angle Lawn Faucet Celcon SFT-0500-T Hose Bibb B&K Proline Solvent Stop Valve
Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards. Bronze colored body with black t-handle. Santoprene seal for chemical resistance. For use in hot or cold fluid systems up to 180 degrees Fahrenheit. Complies with all applicable ASTM and ANSI standards. CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
B&K 108-904RP Backflow Preventer Vacuum Breaker Mueller ProLine Quarter Turn Ball Valve Mueller 107-604 Quarter Turn Solvent Ball Valve
Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant.
BREAKER VACUUM BRASS 3/4INCH  KBI SWL-0500-T Stop and Waste Valve Celcon SFT-0750-T Hose Bibb
SharkBite Vacuum Breaker, 3/4 in, Female x Male End Connection, Brass Body, 180 Deg F, Use On Homes, Schools, Laboratories or Any Commercial Building Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards. Bronze colored body with black t-handle. Santoprene seal for chemical resistance. For use in hot or cold fluid systems up to 180 degrees Fahrenheit. Complies with all applicable ASTM and ANSI standards.
Mueller 107-342NL Full Port Ball Valve NDS SCL-0750-T Stop Valve KBI SWL-0750-T Stop and Waste Valve
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards.
SC125B Sump Check Valve Plumb Pak PP20062LF 1/4 Turn Straight Shut-Off Valve Plumb Pak PP806-15 Tee Valve Faucet Handle
Durable sonic welded thermo-plastic body. Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated Plumb Pak Tee Valve Faucet Handle, Suitable For Use With: Lawn Faucet or Valves, 12/16 Point
Plumb Pak PP20051LF 1/4 Turn Angle Shut-Off Valve NDS EBV-1000-T 1-Piece Economy Full Port In-Line Ball Valve Genova 500 Straight Supply Line Valve
Chrome. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2", 3/4", and 1" CPVC tubing (Requires couplings for attaching to 3/4" or 1" tubing). Bulk.
Plumb Pak PP20060LF Quarter Turn Angle Stop Valve Plumb Pak PP20052LF Quarter Turn Straight Stop Valve Plumb Pak PP20050LF 1/4 Turn Angle Shut-Off Valve
Chrome Chrome. Chrome.
Mueller ProLine Quarter Turn Solvent Ball Valve B K Industries 102-003 Boiler Drains B&K Proline 1/4 Turn Angle Angle Supply Line Valve
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Rising stem, six-point cast-iron handle, 3/4" hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61. B&K Angle Supply Line Valve, 1/4 Turn, Angle, Series: Proline, 1/2 X 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Water, Brass Body
B&K Proline 1/4 Turn Angle Stop Valve B and K 191-222HC Water Supply Line Valves B and K 191-432HC Water Supply Line Valves
B&K Angle Stop Valve, 1/4 Turn, Series: Proline, 1/2 X 3/8 in Nominal, Sweat X Compression End, 125 psi, Media: Water, Brass Body, 180 deg F, NSF Approved, cUPC Compliant, Chrome Plated, For Use With Water Supply shut-off Application B & K Industries Supply Line Valve, Straight, 3/8 in Nominal, FIP x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body B & K Industries Supply Line Valve, Straight, 1/2 x 3/8 in Nominal, Sweat x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body
NDS EBV-1000-S 1-Piece Economy Full Port In-Line Ball Valve Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Quarter Turn Ball Valve
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Plumb Pak PP20053LF 1/4 Turn Straight Shut-Off Valve B K Industries 102-103 Boiler Drains B K Industries 102-004 Boiler Drains
Chrome. Neoprene seal disc. 3/4" male hose thread. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61. Rising stem, six-point cast-iron handle, 3/4" hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61.
B & K 102-303 No-Kink Hose Bibb B K Industries 191-232HC Water Supply Line Valves B&K 108-904 Silcock Vacuum Breaker
For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. B & K Industries Supply Line Valve, Straight, 1/2 x 3/8 in Nominal, FIP x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved.
Plumb Pak PP20063LF 1/4 Turn Straight Shut-Off Valve NDS 107 Standard Round Valve Box With Overlapping ICV Cover Arrowhead PK1250 Sillcock Wheel Handle
5/8" O.D. (1/2" Nom. Copper) x 3/8" O.D. Chrome. Durable plastic construction with snap-in green plastic lid. No. RVB-1 - Top 7", Bottom 8". No. RVB-2 - Top 10", Bottom 13-1/8". CSA approved. Green wheel handle and stainless steel screw. Fits all models.
B&K Proline Economy Sillcock Valve B & K 102-403 No-Kink Hose Bibb Watts LF PBQTR-615 1/4 Turn Straight Stop Valve
3/4 hose thread outlet. Six-point cast-iron handle, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61. For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 Connects to existing valves. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated.
B & K 102-304 No-Kink Hose Bibb Genova 500 Supply Line Valve Kbi/King BDC-0500-S Ever Tuff
For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2", 3/4", and 1" CPVC tubing (Requires couplings for attaching to 3/4" or 1" tubing). Bulk. High-impact CPVC construction for use in hot or cold fluid systems up to 180 degrees F. Use with water and approved chemicals. 1/2" MHT outlet. Beige color body with red wheel handle. tpe seal for chemical resistance and long life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards.
Plumb Pak PP20322LF 1/4 Turn Transitional Straight Supply Line Valve Genova 500 Line Valve B K Industries 102-104 Boiler Drains
Straight, chrome. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2" and 3/4" CPVC tubing (Requires couplings for attaching to 3/4" tubing). Bulk. Neoprene seal disc. 3/4" male hose thread. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61.
Danco 10006 Faucet Handle with Adapter Watts LF PBQT-090 1/4 Turn Angle Stop Valve Watt P-672 Push Fit Straight Stop Valve
Fits all outdoor faucets. Larger, ergonomic handle is easier to turn on/off. Durable construction (heavier gauge zinc). Includes universal adapter and screws. Solid ball valve design. Brass stem. Water supply valve, 1/4 turn on and 1/4 turn off. Chrome. Bagged. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Arrowhead PK1290 Oval Sillcock Wheel Handle B & K 103-003 Hose Bibb B & K 103-003 Hose Bibb
Green wheel handle and stainless steel screw. Fits all models. 3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine 2-Piece Gas Ball Valve B & K QuarterMaster No-Kink Hose Bibb
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
Plumb Pak PP20321LF 1/4 Turn Transitional Angle Supply Line Valve John Guest PPSV041212WP 1/4 Turn Straight Stop Valve John Guest PPSV040808WP 1/4 Turn Straight Stop Valve
Angle. Chrome Produced in polypropylene and fitted with EPDM o-rings, more chemically resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Produced in polypropylene and fitted with EPDM o-rings, more chemically resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems.
B&K Proline 1/4 Turn Angle Angle Supply Line Valve Plumb Pak PP20061LF 1/4 Turn Angle Shut-Off Valve Mueller ProLine Full Port Ball Valve
B&K Angle Supply Line Valve, 1/4 Turn, Angle, Series: Proline, 5/8 X 3/8 in Nominal, Compression End, 125 psi, Media: Water, Brass Body, 180 deg F, NSF Approved, cUPC Compliant, Chrome Plated Plumb Pak Angle Shut-Off Valve, 1/4 Turn, 5/8 X 3/8 in Nominal, OD X OD End, Brass Body, Chrome Plated 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Quarter Turn Solvent Ball Valve
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant.
Watt P-675 Push Fit Angle Stop Valve B&K Proline Economy Sillcock Valve Watts LF PBQT-290 1/4 Turn Angle Stop Valve
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 3/4 hose thread outlet. Six-point cast-iron handle, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61. Solid ball valve design. Brass stem. Water supply valve, 1/4 turn on and 1/4 turn off. Chrome plated. Bagged.
B & K 102-404 No-Kink Hose Bibb Mueller ProLine Full Port Ball Valve B&K Proline Stop Valve
For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Rising stem, six-point cast-iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.
B and K Industries 102-703HN Boiler Drains Pro Bite 191-932HC/LF953SR Water Supply Line Valves John Guest PPSV500822WP Push Connect Fitting
Rising stem, neoprene seal washer, 3/4" hose thread outlet, cast iron handle. Theaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, colde ends comply with ANSI B16.18. Mueller Push Fit Valve, Straight Pattern, 1/2 x 3/8 in Nominal, Push-Fit x Compression End, 200 psi, Media: Water, Brass Body, 200 Deg F, Standards: CSA Certified, NSF and cUPC Approved, Chrome Plated Finish, For Plumbing Applications Reverse Osmosis storage tank valve. Produced in polypropylene and fitted with EPDM o-rings, more chemically resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Sizes indicated are Tube OD x Thread NPTF
B and K Industries 191-032HC Water Valve Plumb Pak PP827-9 Loose Key Air Valve B and K Industries 102-054HN Quarter Master
B & K Industries Supply Line Valve, Straight, 5/8 x 3/8 in Nominal, Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body 1/8 x 27 NPT. Fits most steam radiators. Includes one vent and one key. Chrome plated. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7; solder (sweat) ends comply with ANSI-B16.18. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
John Guest PPSV501222WP Push Connect Fitting Watts P-673 Quick Connect Straight Stop Valve B K Industries 102-053HN Quarter Master
Reverse Osmosis storage tank valve. Produced in polypropylene and fitted with EPDM o-rings, more chemically resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Sizes indicated are Tube OD x Thread NPTF Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7; solder (sweat) ends comply with ANSI-B16.18. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
B & K QuarterMaster No-Kink Hose Bibb B & K QuarterMaster Hose Bibb Plumb Pak PP20064LF Quarter Turn Straight Stop Valve
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton. Chrome plated.
Watt P-676 Push Fit Angle Stop Valve B & K QuarterMaster No-Kink Hose Bibb B&K Proline Quarter Master 1/4 Turn Sillcock Valve
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSF 61.9 Approved, complies to ASME A112.18.1. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification.
Mueller ProLine Compact Pattern Standard Port Gate Valve Mueller ProLine In-Line Check Valve B & K 103-013 Hose Bibb
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61.
Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.
B&K Proline Stop and Waste Valve B & K QuarterMaster No-Kink Hose Bibb Plumb Pak PP25502LF Saddle Valve
Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton 1/4 O.D. Tube outlet for 3/8''- 3/4'' O.D. tubing or iron pipe.
Watts P-671 Quick Connect Straight Stop Valve Pro Bite 190-932HC/LF953AR Water Valve VALVE 1/2IN FIP X FIP
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" x 1/4" OD. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Yellow handle. 1/2 PSI maximum working pressure.
B and K Industries 102-704HC Boiler Drains B and K 102-803HC Boiler Drains B and K 102-804HC Boiler Drains
Rising stem, neoprene seal washer, 3/4" hose thread outlet, cast iron handle. Theaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, colde ends comply with ANSI B16.18. Rising stem, six-point cast iron lhandle, 3/4" hose thread ourlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Rising stem, six-point cast iron lhandle, 3/4" hose thread ourlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7.
Apollo Valves APXVA1238C 1/4 Turn Angle Stop Valve Apollo Valves APXVS1238C 1/4 Turn Straight Stop Valve Mueller ProLine Quarter Turn Ball Valve
Apollo Valves Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Pex Barb X Comp End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe Apollo Valves Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Pex Barb X Comp End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
VALVE GARDHOSE 1/2PEX X 3/4MH Plumb Pak PP60PCLF Quarter Turn Angle Stop Valve B&K Proline Economy Solder Sillcock Valve With Coupling
Chrome Six-point cast-iron handle, oversized notched flange, solder ends comply with ANSI B16.18, hose threads comply with ANSI B1.20.7, certified to NSF 61. 1/2" C inlet or 3/4" solder connection with 3/4" C x C coupling.
Mueller ProLine Compact Pattern Standard Port Gate Valve Mueller ProLine In-Line Check Valve B & K 103-014 Hose Bibb
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61.
Mueller ProLine Full Port Ball Valve VALVE 3/8IN FIP X FIP         Watt P-677 Push Fit Angle Stop Valve
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Yellow handle. 1/2 PSI maximum working pressure. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged.
NDS flo Control 1011 Reinforced Poppet Check Valve Plumb Pak PP63PCLF 1/4 Turn Straight Shut-Off Valve Watts LF PBQTP-250 1/4 Turn Angle Stop Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component. 5/8" O.D. (1/2" Nom. Copper) x 3/8" O.D. Chrome. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated.
Watts LF PBQT-113 1/4 Turn 3-Way Angle Stop Valve Watt P-683 Push Fit Angle Stop Valve Watts LF PBQT-118 1/4 Turn 3-Way Angle Stop Valve
Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated.
Watts LF PBQT-213 1/4 Turn 3-Way Angle Stop Valve Plumb Pak PP52PCLF 1/4 Turn Straight Shut-Off Valve Sta-Rite FP0026-6D-P2 Sump Pump Check Valve
Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Chrome. Double-threaded for use with 1-1/4" or 1-1/2" sump pump discharges, Discharge side designed to allow discharge hose to clamp directly in place, built-in anti-airlock hole.
B and K 102-033 Boiler Drains NDS flo Control 1001 Reinforced Poppet Check Valve B&K Proline Quarter Master 1/4 Turn Sillcock Valve
For 5/8" OD Tubing with stuffing box. Neoprene seal disc, 3/4" hose thread outlet, cast iron handle. Hose threads comply with ANSI B1.20.1, rising stem certified to NSF 61. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSF 61.9 Approved, complies to ASME A112.18.1. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification.
B&K 109-204 Self-Closing Drum and Barrel Faucet B & K QuarterMaster Hose Bibb Watts P-650 Quick Connect Straight Stop Valve
Zamac construction. Convenient holes to lock handle closed position. For use with all petroleum products, except trichlorethylene. Not for use with detergents or water. 3/4" male pipe thread inlet. Threaded inlets comply with ANSI B1.20.01. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged
Brass Craft PSBV503-8 Quarter Turn Gas Ball Valve Plumb Pak PP46PCLF 1/4 Turn Angle Stop Valve Plumb Pak PP51PCLF 1/4 Turn Angle Shut-Off Valve
Gas appliance connector with lever handle. AGA Design Certified. Carded. Quarter turn angle shut off valve. Chrome.
Plumb Pak PP53PCLF 1/4 Turn Straight Shut-Off Valve Plumb Pak PP855-2LF Saddle Valve Plumb Pak PP123PCLF 1/4 Turn Angle Shut-Off Valve
Chrome. 1/4 O.D. Tube outlet for 3/8''- 3/4'' O.D. tubing or iron pipe. Angle, chrome
Watts LF PBQT-218 1/4 Turn 3-Way Angle Stop Valve BrassCraft OCR14X C1 Multi-Turn Straight Stop Valve BrassCraft OCR19X C1 Multi-Turn Angle Stop Valve
Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Chrome multi-turn straight stop. 1/2" nominal compression inlet x 3/8" O.D. compression outlet. Boxed. Chrome multi-turn angle stop. 1/2" nominal compression inlet x 3/8" O.D. compression outlet. Boxed.
Mueller ProLine Full Port Gate Valve Mueller ProLine Swing Check Valve Mueller ProLine Full Port Ball Valve
Full port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Certified to NSF 61 requirements. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61.
B&K Proline Stop Valve B&K Proline Stop Valve B&K Proline Stop and Waste Valve
125 PSI WOG,  Rising stem, six-point cast-iron handle, threaded ends comply with ANSI B1.20.1, CSA certified, certified to NSF 61-G. Rising stem, six-point cast-iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G.
BrassCraft OR12X C1 Multi-Turn Straight Stop Valve Plumb Pak PP50PCLF 1/4 Turn Angle Shut-Off Valve VALVE 1/2IN FIP X FIP 1 PIECE
Chrome multi-turn straight stop. 1/2" FIP inlet x 3/8" O.D. compression outlet. Boxed. Chrome. Yellow handle. 1/2 PSI maximum working pressure.
VALVE 3/4IN FIP X FIP         Watts P-450 Quick Connect Straight Stop Valve Watt P-678 Push Fit Angle Stop Valve
Yellow handle. 1/2 PSI maximum working pressure. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged.
Plumb Pak PP61PCLF 1/4 Turn Angle Shut-Off Valve Mueller ProLine Quarter Turn Ball Valve Apollo APXV1212 Quarter Turn Ball Valve
Plumb Pak Angle Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Nominal Compression X OD End, Brass Body, Chrome Plated For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Apollo Ball Valve, Quarter Turn, Series: APXV1212, 1/2 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807
PEX VALVE STRAIGHT STOP 1/2IN VLV QTR TURN ANG 1/2X1/4IN    VLV QTR TURN STR 1/2X1/4
Use to install shutoff in straight pipe run.  Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
Genova 53067 Washer Hose Valve NDS flo Control 1011 Reinforced Poppet Check Valve NDS flo Control 1001 Reinforced Poppet Check Valve
Solvent welds directly to 1/2" CPVC tubing and adapts to female hose couplings. Most often used in conjunction with No.53056/530561 wing elbow to supply water to automatic washing machines. Bulk. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards.
Mueller ProLine 1-Piece Gas Ball Valve Brass Craft PSSD-41 Quarter Turn Gas Ball Valve Plumb Pak PP57PCLF 1/4 Turn Straight Shut-Off Valve
Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Carded.
Mueller ProLine Full Port Ball Valve B&K Proline Stop and Waste Valve BrassCraft OR17X C1 Multi-Turn Angle Stop Valve
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Chrome multi-turn angle stop. 1/2" FIP inlet x 3/8" O.D. compression outlet. Boxed.
SC125SRS Sump Check Valve Plumb Pak PP54PCLF 1/4 Turn Angle Shut-Off Valve Anderson 7104SCSD Self-Tapping Saddle Valve
Durable sonic welded thermo-plastic body. 1/2" F.I.P. x 7/16" O.D. 1/2" O.D. slip joint. For use with copper tubing. Can be installed while line is under pressure. Valve has 1/4" compression connection and clamp will fit 3/8" thru 1-3/8" O.D. copper tubing. Includes valve, saddle, nuts, screws and washer. PIERCE PIN SHOWN IN CLOSED POSITION. Bagged.
Brass Craft PSSL-12 Gas Ball Valves Anderson 759103-0402 Angle Needle Shut-Off Valve Anderson 759106-04 Straight Needle Shut-Off Valve
Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Anderson Needle Shut-Off Valve, Angle, 1/4 X 1/8 in Nominal, Compression X Male Pipe End, Brass Body, Chrome Plated Finish Anderson Needle Shut-Off Valve, Straight, 1/4 in Nominal, Compression X Compression End, Brass Body
B and K 102-013 Boiler Drains Watts PL-3012 Push-Fit Quick Connect Straight Stop Valve Plumb Pak PP53-1PCLF 1/4 Turn Straight Shut-Off Valve
3/4" hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 1/2 in Nominal, FIP X OD End, Brass Body, Chrome Plated
Plumb Pak PP62-1PCLF 1/4 Turn Angle Shut-Off Valve Plumb Pak PP62PCLF 1/4 Turn Straight Shut-Off Valve Mueller ProLine Full Port Ball Valve
5/8" O.D. (1/2" Nom. Copper) x 1/2" O.D. Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated Full port, PTFE seat and packing, padking gland, chrome-plated brass ball and stem, PEX to copper threaded connection, pipe threads comply with ANSI B1.20.1, PEX connections comply with ASTM F-1807, IAPMO listed to cUPC, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Quarter Turn Solvent Ball Valve PEX VALVE STOP COMPRSN 1/2X3/8
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
Plumb Pak PP2622POLF 1/4 Turn Push-Fit Quick Lock Angle Stop Valve Mueller ProLine Full Port Ball Valve NDS EBV-1250-S 1-Piece Economy Full Port In-Line Ball Valve
1/2. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
Mueller ProLine Full Port Ball Valve Plumb Pak PP2068POLF Quarter Turn Straight Stop Valve Arrowhead Brass PK1430 Air Vent Assembly Kit
Nickel finish, full port, PTFE disc and seat, frost-proof stainless steel ball design, CSA ANSI Z 21.15 (1/2 PSIG), CSA certified to ASME B 16.33 (5G), CSA certified to ASME B16.44 (125G), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-Gas shutoff valve (YSDT), FM approved, comforms to MSS-SP-110, meets fed spec WW-V-35, Type II, Class A Style 3, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. 5/8" O.D. Comp. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor. Includes vacuum breaker cap, underbody, o-ring, and plunger. Air vent assembly for Arrowhead frost free hydrants, 420 & 455BFP series.
Brass Craft TBVF8 Quarter Turn Gas Ball Valve Plumb Pak PP51-1PCLF 1/4 Turn Angle Shut-Off Valve NDS EBV-1250-T 1-Piece Economy Full Port In-Line Ball Valve
Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16 Quarter turn angle shut off valve. Chrome. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
BrassCraft OCR39X C1 Multi-Turn Angle Stop Valve Mueller ProLine Compact Pattern Standard Port Gate Valve Mueller ProLine Compact Pattern Standard Port Gate Valve
Chrome multi-turn angle stop. 1/2" nominal compression inlet x 1/2" O.D. compression outlet. Boxed. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61.
Mueller ProLine Full Port Gate Valve Mueller ProLine Full Port Ball Valve Mueller ProLine Quarter Turn Solvent Ball Valve
Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Plumb Pak PP65PCLF Quarter Turn Angle Stop Valve B&K Proline Stop Valve B&K Proline Stop and Waste Valve
5/8" O.D. (1/2" NOM. Copper) x 7/16" O.D.  1/2" O.D. rubber slip joint. 125 PSI WOG,  Rising stem, six-point cast-iron handle, threaded ends comply with ANSI B1.20.1, CSA certified, certified to NSF 61-G. Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61.
B&K Proline Stop and Waste Valve Plumb Pak PP67PCLF 1/4 Turn Angle Shut-Off Valve Plumb Pak PP2071LF Quarter Turn Straight Stop Valve
Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61. 5/8" O.D. (1/2" NOM. Copper) x 7/16" O.D. - 1/2" O.D. Carded. Chrome plated.
BrassCraft G2R10X CD 1/4 Turn Straight Stop Valve VALVE 3/4IN FIP X FIP 1 PIECE B and K 102-014 Boiler Drains
Chrome plated brass. Yellow handle. 1/2 PSI maximum working pressure. 3/4" hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7.
Watts PL-3042 Push-Fit Quick Connect Straight Stop Valve Watts PL-3041 Push-Fit Quick Connect Straight Stop Valve Watts PL-3011 Push-Fit Quick Connect Straight Stop Valve
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes..
Plumb Pak PP61-1PCLF 1/4 Turn Straight Shut-Off Valve BrassCraft G2CR14X CD 1/4 Turn Straight Stop Valve BrassCraft G2CR19X CD 1/4 Turn Angle Stop Valve
Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 1/2 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated BrassCraft Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Compression End, 125 psi, Media: Potable Water, Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, Rubber O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, Carded BrassCraft Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Compression End, 125 psi, Media: Potable Water, Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, Rubber O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, ASME A112.18.1/CSA B125.1, IAPMO Certified
VALVE CHCK ABS 1-1/4 RUB BOOT VALVE CHCK ABS 1-1/2 RUB BOOT BrassCraft G2R17X CD 1/4 Turn Angle Stop Valve
Rubber boot inlet and outlet. Full flow design, weighted flapper valve Rubber boot inlet and outlet. Full flow design, weighted flapper valve BrassCraft Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Potable Water, Compliant Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, EPDM O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, Carded
BrassCraft G2R15X CD 1/4 Turn Angle Stop Valve Brass Craft TBV6F-8 Quarter Turn Gas Ball Valve B & K 103-023 Hose Bibb
Chrome plated brass. Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16 200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk.
Mueller ProLine 1-Piece Gas Ball Valve NDS ProGuard Gate Valve NDS ProGuard Gate Valve
Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
B K Industries 117-592 Gas Ball Valves Sharkbite 23036-0000LF 1/4 Turn Angle Stop Valve Sharkbite 23037-0000LF 1/4 Turn Straight Stop Valve
Forged brass 1-piece body. Chrome plated forged brass ball. Coated aluminum handle. 9/16''-24 fine thread flare for 3/8'' tube. Threaded ends comply with ANSI B1.20.1. CSA Certified, CSA- 3-88 (2 PSIG) Certified. Threaded flare ends comply with SAE F513. UPC coded bulk. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Plumb Pak K2622PCPOLF 1/4 Turn Quick Lock Angle Supply Line Valve Plumb Pak 2623PCPOLF 1/4 Turn Push-Fit Quick Lock Angle Stop Valve B&K Proline Sillcock Valve With Lock Shield
1/2. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor. Valve pushes on to PEX, CPVC, or Copper. Features a double o-ring, safety clip, no-tool removal. 3/4" threaded outlet. Lockshield prevents unwanted use of valve when handle is removed, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.
B&K Proline Sillcock Valve With Lock Shield BrassCraft OR37X C1 Multi-Turn Angle Stop Valve Plumb Pak 2070PCPOLF Quarter Turn Straight Stop Valve
3/4" threaded outlet. Lockshield prevents unwanted use of valve when handle is removed, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. Chrome multi-turn angle stop. 1/2" FIP inlet x 1/2 O.D. compression outlet. Boxed. Valve pushes on to PEX, CPVC, or Copper. Features a double o-ring, safety clip, no-tool removal.
BrassCraft OR32X C1 Multi-Turn Straight Stop Valve Mueller ProLine Swing Check Valve B&K Proline 7700 Full Port Solder Ball Valve
Chrome multi-turn straight stop. 1/2" FIP inlet x 1/2" O.D. compression outlet. Boxed. Certified to NSF 61 requirements. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
Mueller ProLine 2-Piece Gas Ball Valve B&K Proline Stop and Waste Valve Wayne 66005-WYN Check Valve
Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. 1-1/2" pump thread with 1-1/4" or 1-1/2" pipe connection.
BrassCraft OCR09X C1 Multi-Turn Angle Stop Valve B and K 102-034 Boiler Drains Flair-It 16879 Straight Stop Valve
Chrome multi-turn angle stop. 1/2" nominal compression inlet x 1/4" O.D. compression outlet. Boxed. For 5/8" OD Tubing with stuffing box. Neoprene seal disc, 3/4" hose thread outlet, cast iron handle. Hose threads comply with ANSI B1.20.1, rising stem certified to NSF 61. For hot or cold water In-line valve with PEX connections on both ends. Bar coded.
Plumb Pak PP60-1PCLF Quarter Turn Angle Stop Valve Sharkbite 23048-0000LF 1/4 Turn Angle Stop Valve Flair-It 16892 Water Supply Line Valve
Plumb Pak Angle Stop Valve, Quarter Turn, 1/2 X 1/2 in Nominal, Copper Sweat X Compression End, Media: Water, Brass Body, Chrome Plated, For Hot and Cold Water Applications The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. 1/2" x 3/8" compression. Connects 1/2" pex or polybutylene and 3/8" compression. No special tools required.
BrassCraft G2R12X CD 1/4 Turn Straight Stop Valve Apollo Valves APXPV1238A 1/4 Turn Angle Stop Valve Apollo Valves APXPV1238S 1/4 Turn Straight Stop Valve
BrassCraft Straight Stop Valve, 1/4 Turn, 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Potable Water, C36000 Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, EPDM Stem O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated Apollo Valves Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Push-Fit X Compression End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe Apollo Valves Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Push-Fit X Compression End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe
VALVE COMP ANG STOP 1/2X1/4IN VALVE STRT STOP COMP 1/2X1/4IN BrassCraft G2PS14X CD 1/4 Turn Straight Stop Valve
SharkBite is the Push-Fit connection system that is really taking hold. It?s the easiest way to join copper, CPVC, or PEX pipe in any combination with no soldering, clamps, unions, or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite is the Push-Fit connection system that is really taking hold. It?s the easiest way to join copper, CPVC, or PEX pipe in any combination with no soldering, clamps, unions, or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Quarter turn. Compatible with copper, PEX and CPVC. 1/2" Nom Push Connect x 3/8" OD Comp
Mueller ProLine Quarter Turn Ball Valve VALVE CHECK UNIV 1-1/4AND1-1/2 PEX VALVE MANIFOLD 1/2IN
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Includes one universal check valve and two adapters. Made from durable ABS plastic. High quality NItril-Bruna N seal. Fits all: 1-1/4 & 1-1/2 MPT & FPT. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
PEX VALVE MANIFOLD RED 1/2IN  PEX VALVE MANIFOLD BLK 1/2IN  Plumb Pak PP2659PCLF Quarter Turn Angle Stop Valve
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Chrome
Plumb Pak PP2072LF Quarter Turn Straight Stop Valve John Guest ASVPP1LF Push Connect Angle Valve NDS flo Control 1011 Reinforced Poppet Check Valve
Connects to existing valves. Solid chrome plated brass ball. Brass forged body and solid brass stem. Teflon seats - melting point of 621 degrees Fahrenheit. Captured nut. Compression connection. 100% pressure leak tested. Carded. Feed water valve. White polypropylene with food grade EPDM o-rings, connects between valve and riser to the main water supply line for application in reverse osmosis, filtration systems, automatic coffee brewers, and ice-makers. Not for use with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. Sizes indicated are thread male compression x thread female compression x tube OD. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component.
NDS flo Control 1001 Reinforced Poppet Check Valve Mueller ProLine 1-Piece Gas Ball Valve NDS ProGuard Gate Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve Watts KwikStop 1/4 Turn Quick Connect Angle Stop Valve
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. -20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1 Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Watts P-866 Quick Connect Straight Stop Valve Watts KwikStop 1/4 Turn Quick Connect Straight Stop Valve Mintcraft PMB-431-3L Water Supply Line Valves
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" CTS x 3/8" ODC. Chrome plated with Celcon stem.
Plumb Pak PP2103LF Quarter Turn Straight Stop Valve Simmons 8842 Hydrant Plunger Mueller ProLine Full Port Gate Valve
Connects to existing valves. Solid chrome plated brass ball. Brass forged body and solid brass stem. Teflon seats - melting point of 621 degrees Fahrenheit. Captured nut. Compression connection. 100% pressure leak tested. Carded. Replacement plunger for Simmons 800 series lead free, deluxe frost-proof yard hydrants. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Mueller ProLine In-Line Check Valve B&K Proline 7700 Full Port Ball Valve Mueller ProLine Full Port Ball Valve
Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve VALVE1/2IN FIP X 15/16IN FLARE Anderson 50873-0402 Needle Valve
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Yellow handle. 1/2 PSI maximum working pressure. Anderson Needle Valve, 1/4 X 1/8 in Nominal, Plastic X Male Pipe End, -65 TO 250 deg F, Brass Body
Flair-It 16880 Straight Stop Valve B&K Proline 1/4 Turn Straight Stop Valve John Guest ASVPP2LF Push Connect
For hot or cold water In-line valve with PEX connections on both ends. Bar coded. ASGE 1061, PSF 61 approved, cUPC, IAPMO listed, NSF/ANSI 61, AB1953 compliant. Feed water valve. White polypropylene with food grade EPDM o-rings, connects between valve and riser to the main water supply line for application in reverse osmosis, filtration systems, automatic coffee brewers, and ice-makers. Not for use with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. Sizes indicated are thread male compression x thread female compression x tube OD.
Flair-It 16893 Stop Valve Plumb Pak PP2041PCLF Quarter Turn Straight Stop Valve Mueller ProLine Full Port Ball Valve
1/2" x 3/8" compression. Connects 1/2" pex or polybutylene and 3/8" compression. Plumb Pak Straight Stop Valve, Quarter Turn, 5/8 X 3/8 in Nominal, Compression X Compression End, Media: Water, Brass Body, Chrome Plated, For Hot and Cold Water Applications 200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve Mueller ProLine Quarter Turn Ball Valve Apollo APXV3434 Quarter Turn Ball Valve
Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Apollo Ball Valve, Quarter Turn, Series: APXV3434, 3/4 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807
VALVE BALL 1-1/2IN S80 SOLVENT B & K ProLine Foot Valve PEX VALVE ANGLE COMP 1/2X3/8IN
Rated for 150 PSI at 73 Deg. F. For use with cold water applications, certified to NSF61-G, PTFE seats, EPDM O-rings. Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1. Use to install shutoff in supply line. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
NDS EBV-1500-S 1-Piece Economy Full Port In-Line Ball Valve Mueller ProLine Full Port Ball Valve Plumb Pak PP2901VLF 3-Way Stop Valve
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Chrome plated.
FV441 4-In-1 Foot Valve NDS EBV-1500-T 1-Piece Economy Full Port In-Line Ball Valve Plumb Pak PP32-1PCLF 1/4 Turn Transitional Angle Supply Line Valve
Nylon Body. Corrosion resistant parts. Fits four pipe sizes, 3/4", 1", 1-1/4" and 1-1/2". Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Angle. Chrome
Plumb Pak PP2670PCLF Quarter Turn Angle Stop Valve Mueller ProLine Compact Pattern Standard Port Gate Valve Brass Craft PSBV503-12 Quarter Turn Gas Ball Valve
Chrome Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Gas appliance connector with lever handle. AGA Design Certified.
Plumb Pak PP32-2PCLF 1/4 Turn Transitional Straight Supply Line Valve BrassCraft G2CR34X CD 1/4 Turn Straight Stop Valve VALVE 3/4IN FIP X 5/8IN FLARE
Straight, chrome. Chrome 1/4 turn straight stop. 1/2" nominal compression inlet x 1/2" O.D. compression outlet. Carded. Yellow handle. 1/2 PSI maximum working pressure.
VALVE 3/4IN FIP X 15/16 FLARE Anderson 759101-0402 Straight Needle Shut-Off Valve Anderson 759106-06 Straight Needle Shut-Off Valve
Yellow handle. 1/2 PSI maximum working pressure. Anderson Needle Shut-Off Valve, Straight, 1/4 X 1/8 in Nominal, Compression X Male Pipe End, Brass Body Anderson Needle Shut-Off Valve, Straight, 3/8 in Nominal, Compression X Compression End, Brass Body
STOP VALVE ADAPTER 3/8MX3/8F  Sharkbite 23049-0000LF 1/4 Turn Straight Stop Valve BrassCraft G23301X CD 1/4 Turn Angle Stop Valve
Plastic adapter stop valve. 1/4 OD x 3/8 Male Comp x 3/8 Female comp The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Chrome 1/4" turn angle stop. 1/2" FIP x 7/16" & 1/2" slip joint. Carded.
BrassCraft G2PS19X CD 1/4 Turn Angle Stop Valve PEX VALVE 3W 1/2X1/2X1/2IN    PEX VALVE ANGLE 1/2IN
PEX VALVE ANGLE 1/2IN
Our Price: $11.99
Quarter turn. Compatible with copper, PEX and CPVC. 1/2" Nom Push Connect x 3/8" OD Comp Use to bypass flow to water heaters and softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Use to install shutoff in supply line. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
VLV QTR TRN INLN 1/2X1/2X1/4IN VLV QTR TRN INLN 1/2X1/2X3/8IN Arrowhead 302 Standard Hose Bibb
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank.
Arrowhead 355LSLF Loose Key Solid Flanged Sillcock Valve Arrowhead 255LF Solid Flanged Sillcock Valve Arrowhead 353 No-Kink Hose Bibb
Factory installed loose key lockshield. Key not included (Use key Item # 454.5869 Solid flange sillcock features green coated oval handle with stainless steel screw, 1-piece O-ring bonnet (no packing) and is made of heavy pattern rough brass. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle.
Arrowhead 251 No-Kink Hose Bibb B & K 103-024 Hose Bibb Arrowhead 254 No-Kink Hose Bibb
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. 200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. ?? copper compression x 3/4? hose connection.
Mueller ProLine 1-Piece Gas Ball Valve Brass Craft PSSC-61 Gas Ball Valves BrassCraft G23305X CD 1/4 Turn Straight Stop Valve
1-piece body, chrome-plated forged brass ball, coated aluminum handle. Threaded ends comply with ANSI B1.20.1. CSA Certified. Threaded flare ends comply to SEA J513. CSA Z21 (PSIG) certified. Non-replaceable rotor. 6.9"L x 4.9"W x 1.9"D Chrome 1/4 turn straight stop. 1/2" FIP x 7/16" & 1/2" slip joint. Carded.
Mueller ProLine Full Port Ball Valve Arrowhead 351 No-Kink Hose Bibb Arrowhead 301 Standard Hose Bibb
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank.
Arrowhead 253 No-Kink Hose Bibb Arrowhead 252 No-Kink Hose Bibb Arrowhead Brass 221BCLD Boiler Drains
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. 1/2" Nom. Copper or 3/4" O.D. Copper Sweat x 3/4" Hose Connection. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle.
Arrowhead Brass 222BCLD Boiler Drains Flair-It 16887 Flair-It Washing Machine Valves QRTR TURN ANG VLV 5/8OD
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle. For hot or cold water. Used for connecting washing machine hose to PEX or Polybutylene tubing. Bar coded. Push Fit application valve fits 1/2" CTS, PEX, CPVC.
BrassCraft G23341X CD 1/4 Turn Angle Stop Valve VALVE STR 5/8X12 SS TOI SUPPLY PEX VALVE BYPASS 1/2IN
PEX VALVE BYPASS 1/2IN
Our Price: $12.99
Chrome 1/4 turn angle stop. 1/2" nominal compression x 7/16" & 1/2" slip joint. Carded. Stainless steel Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
PEX BYPASS 1/2X1/2MPTX1/2IN   PEX VALVE CENTER DRN 3WY 1/2IN Arrowhead 255LSLF Loose Key Solid Flanged Sillcock Valve
Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Factory installed loose key lockshield. Key not included (Use key Item # 454.5869
Plumb Pak PP2902VLF 3-Way Stop Valve Arrowhead 255SWLF Solid Flanged Sillcock Valve NDS 111BC Standard Round Valve Box With Overlapping ICV Cover
Chrome plated. Carded 1/2" I.D. or 3/4" O.D. copper sweat x 3/4" hose connection. 1-piece O-ring bonnet, solid flange & coated oval handle Durable plastic construction with snap-in green plastic lid. No. RVB-1 - Top 7", Bottom 8". No. RVB-2 - Top 10", Bottom 13-1/8". CSA approved.
Brass Craft PSSC-60 Quarter Turn Gas Ball Valve Mueller ProLine Full Port Gate Valve Mueller ProLine Standard Port Gate Valve
Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G. Non-rising stem, six-point cast-iron handle, compression ends for solderless connection to copper tubing, certified to NSF 61.
B&K Proline 7700 Full Port Solder Ball Valve Arrowhead 351 No-Kink Hose Bibb Without Key Plumb Pak PP2903VLF 3-Way Quarter Turn Stop Valve
-20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Features heavy pattern rough brass, 1-piece O-ring bonnet, Uses 5/16 square key not included. Chrome plated.
Arrowhead 355LF Solid Flanged Sillcock Valve Arrowhead 251 No-Kink Hose Bibb Without Key VALVE 1IN FIPX1IN FIP TEE HNDL
Solid flange sillcock features green coated oval handle with stainless steel screw, 1-piece O-ring bonnet (no packing) and is made of heavy pattern rough brass. Features heavy pattern rough brass, 1-piece O-ring bonnet, Uses 5/16 square key not included. Yellow handle. 1/2 PSI maximum working pressure.
Arrowhead Brass 223BCLD Boiler Drains B&K Proline 1/4 Turn Straight Stop Valve Plumb Pak PP2904VLF 3-Way Stop Valve
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle. ASGE 1061, PSF 61 approved, cUPC, IAPMO listed, NSF/ANSI 61, AB1953 compliant. Chrome plated. Carded
QRTR TURN ANG VLV 5/8OD       VALVE STR 5/8X20 SS FCT SUPPLY B & K 106-003NL Globe Valve
Push Fit application valve fits 1/2" CTS, PEX, CPVC. Stainless steel 125 PSI steam WSP. 200 PSI water, oil or air WOG. Bronze to bronze seal. Heavy cast iron handle. Threaded ends comply with ANSI B1.20.1.
NDS ProGuard Gate Valve Sta-Rite Industries FP0026-10 Flotec NDS flo Control 1011 Reinforced Poppet Check Valve
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Prevents water backflow into sump basin.  Accept 1-1/4" or 1-1/2" discharge lines.  Corrosion-resistant construction.  Non-threaded, in-line check valve with rubber sleeve and hose clamps. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component.
NDS flo Control 1001 Reinforced Poppet Check Valve NDS ProGuard Gate Valve Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. -20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1
Mueller ProLine Swing Check Valve Wayne 57028-001 Check Valve Kit With Rubber Boot and Metal Collars B and K Industries 110-225/110-125 Gas Ball Valve
Certified to NSF 61 requirements. Includes: Two convertible fittings and four hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4" or 1-1/2" OD pipe. -20 Deg. F ? 300 Deg. F temperature range, quarter-turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance, multi-directional flow, two-piece body design, chrome-plated brass ball, CSA - ANSI Z21.15, (1/2 PSIG), ANSI/ASME B16.44 (5G), UL listed, threaded ends comply with ANSI B1.20.1. Rated for 200 PSI
Plumb Pak PP2042PCLF Quarter Turn Straight Stop Valve B & K ProLine Foot Valve VALVE QRTR TURN 3WAY 1/2IN FIP
Plumb Pak Straight Stop Valve, Quarter Turn, 5/8 X 7/16 - 1/2 in Nominal, Compression X Compression End, Media: Water, Chrome Plated, For Hot and Cold Water Applications Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1.
VALVE QTR TURN 3WAY 5/8 OD INL VLV QTR TRN 3W 1/2IN FIPX3/8OD SharkBite 22222-0000LF 1-Piece Full Port In-Line Ball Valve
High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water).
Plumb Pak K2048ABNLF 1/4 Turn Angle Supply Line Valve NDS flo Control 1011 Reinforced Poppet Check Valve NDS flo Control 1001 Reinforced Poppet Check Valve
Brass forged body, solid brass stem, Flow rates 20% higher than ASME 112.18.1M Minimum Standard, O-rings designed to be used at working temperatures ranging between -40 degrees and 250 degrees, Teflon Seats - melting point of 621 degrees F. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards.
Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve BrassCraft CR1901LRX R1 Dual Outlet Multi-Turn Stop Valve Mueller ProLine Full Port Gate Valve
-20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1 Chrome dual outlet stop. 1/2" nominal compression inlet x 3/8" OD compression riser outlet x 3/8" OD compression side outlet. Boxed. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Mueller ProLine Full Port Ball Valve VALVE 1/2IN MIP X CSST DIRECT Mueller ProLine Quarter Turn Ball Valve
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Yellow handle. 1/2 PSI maximum working pressure. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
Mueller ProLine Quarter Turn Solvent Ball Valve VALVE BALL SHARKBITE BRS 1/2IN SHOCK ABSORBR SUPPLY MIP 1/2IN
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant. High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). Oatey quiet pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves and protect plumbing appliances and fixtures from the effects of water hammer.  Quiet pipes absorbers contain a piston that uses a triple O-ring to maintain 60 psi charge in the tube. When the water valve is shutoff, it sends a shock through the system and the piston compresses.  This absorbs a shock that would normally rattle and shake the pipe.
PEX VALVE STRAIGHT STOP 3/4IN VLV QTR TURN 3WAY 5/8 OD INL  NDS EBV-2000-S 1-Piece Economy Full Port In-Line Ball Valve
Use to install shutoff in straight pipe run.  Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
NDS EBV-2000-T 1-Piece Economy Full Port In-Line Ball Valve Arrowhead 202 Shank-On Thread Standard Hose Bibb Arrowhead 201 Shank-On Thread Hose Bibb
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper.
NDS WSU-1520-S Full Port Pool Diverter Single Union Ball Valve Sharkbite U2008-0000LFA Straight Check Valve Mueller ProLine Compact Pattern Standard Port Gate Valve
Full port design, preset at 5 psi or 12 feet of head and can be adjusted to 14 psi or 32 feet of head, combination of 1-1/2" socket and 2" spigot on each end can be used on both sizes of pipe, single union design for easy serviceability, EPDM o-ring, meets/exceeds ASTM & Ansi STANDARDS. Bulk. General purpose spring check valve that prevents the reverse flow of water. Can be installed horizontally and vertically and can be connected in seconds to copper tubing, CTS, CPVC, and Pex. Instant push-fit connections for increase ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 150 degrees F (65 degrees C) (water). Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
B&K Proline 7700 Full Port Ball Valve Mueller ProLine Full Port Ball Valve BrassCraft CR1901LRX C1 Dual Outlet Multi-Turn Stop Valve
-20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Chrome dual outlet stop. 1/2" nominal compression inlet x 3/8" O.D. compression riser outlet x 3/8" O.D. compression side outlet. Boxed.
BrassCraft CS40BXC1 Multi-Turn Angle Stop Valve With Bell Escutcheon Mueller ProLine Full Port Ball Valve Mueller 104-403 ProLine Frost Free Sillcock Valve
With 5" extension tube and bell flange. Chrome plated brass. 1/2" Nom. Sweat Inlet x 3/8" OD Comp Outlet. Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. 1/2'' MIP x 1/2'' Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4" hose thread outlet, heavy cast iron handle. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC Coded. Bulk handy carton.
Mueller 104-511 ProLine Anti-Siphon Frost Free Sillcock Valve TOILET INSTALL KIT RETAIL BAG BrassCraft CS41BXC1 Multi-Turn Straight Stop Valve
CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. Includes: SharkBite 1/2" x 1/4" (3/8" OD) Push-to-Connect angle stop valve. 5 ft. coil of 1/4? PEX tubing. 1/4" (3/8" OD) SharkBite x 7/8" ballcock swivel toilet connector.1/4 and 1/2" disconnexct clips. With 5" extension tube and bell flange. Chrome plated brass.
BrassCraft CR1900RX C1 Dual Outlet Stop Valve Mueller ProLine Full Port Ball Valve