Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE REPAIR
Choose a sub category:
RUBBER FLEX FITTINGS HOSE CLAMPS PIPE REPAIR CLAMPS
PIPE REPAIR KITS PIPE REPAIR COUPLINGS PVC COMPRESSION FITTINGS
SADDLE TEES TEST CAPS & PLUGS PIPE/TUBING STRAPS & HANGERS
PIPE GUARDS
Sort By:
1
Oatey 39100/33460 Test Caps Oatey 39101/33461 Test Caps Oatey 39102/33462 Test Caps
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Oatey 39103/33463 Test Caps Elkhart 32414 2-Hole Tube Strap B&K G85-300HC Stud Guard
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Contractor Pack - Bagged Protects pipes and wiring installation.
B and K Industries P01-050HC Baby J-Hook B and K Industries P01-075HC Baby J-Hook B&K G85-500HC Stud Guard
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. Protects pipes and wiring installation.
B&K G13-038HC 2-Hole Pipe Strap B&K G13-100HC 2-Hole Pipe Strap B and K Industries P01-100HC Baby J-Hook
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit.
B and K P28-050HC Pipe Clamps B&K C13-100HC 2-Hole Pipe Strap B&K G85-900HC Stud Guard
Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Protects pipes and wiring installation.
B&K G13-125HC 2-Hole Pipe Strap B and K P28-075HC Pipe Clamps B and K Industries G65-050HC Clevis Hanger
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger.
B&K C13-125HC 2-Hole Pipe Strap B&K G13-050HC 2-Hole Pipe Strap B&K P20-100HC Perforated Hanger Tape
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight.
B&K C13-150HC 2-Hole Pipe Strap B&K C15-125HC Nail Elkhart 32428 2-Hole Tube Strap
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. B&K Nail, 1-1/4 in, Copper, Plated Steel Contractor Pack - Bagged
B&K G80-038HC Plate Connector 3/8 in B and K Industries P24-050HC Pipe Clamps B and K Industries P25-050HC Pipe Clamp
Galvanized malleable iron top plate connector used to connect split ring hangers with a 3/8" all thread rod. Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction. Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction.
B and K P25-075HC Pipe Clamps B&K G20-128HC Pipe Strap B&K G20-124HC Pipe Strap
Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction. Galvanized steel 28 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. Lightweight steel. Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.
B&K C13-050HC 2-Hole Pipe Strap B&K C13-075HC 2-Hole Pipe Strap Elkhart 32424 2-Hole Tube Strap
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Contractor Pack - Bagged
B&K G60-038HC Beam Clamp B and K P24-075HC Pipe Clamps B & K Industries P27-050HC Pipe Insulator
Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist. Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction. Durable polypropylene pipe insulator.  V-shaped notch to easily snap onto pipe.  Flanged with holes for secure installation.  Eliminates noise and vibration.
B & K Industries P27-075HC Pipe Insulator B&K G13-150HC 2-Hole Pipe Strap Elkhart 32426 2-Hole Tube Strap
Durable polypropylene pipe insulator.  V-shaped notch to easily snap onto pipe.  Flanged with holes for secure installation.  Eliminates noise and vibration. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Contractor Pack - Bagged
B and K G72-050HC Split Ring Hangers B and K G72-075HC Split Ring Hangers Worldwide Sourcing TWC0534-3L Hanger Iron
B & K Ring Hanger, Split, 1/2 in Opening, Malleable Iron, Galvanized B & K Ring Hanger, Split, 3/4 in Opening, Malleable Iron, Galvanized Galvanized finish. 3/4" x 10'
B&K G13-075HC 2-Hole Pipe Strap B and K Industries C23-050HC J-Hook B and K Industries G10-050HC Pipe Hook
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Provides quick nail support. Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated.
B and K Industries G10-075HC Pipe Hook B&K G13-200HC 2-Hole Pipe Strap B&K G18-050HC 1-Hole Pipe Strap
Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Galvanized steel one-hole strap to secure pipe.  One hole for use with nails or screws to ensure stable fit in tight areas.
B&K G60-050HC Beam Clamp B and K P24-100HC Pipe Clamps B and K Industries P28-100HC Pipe Clamp
Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist. Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction. Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation.
B and K V30-150HC Pipe Hangers B and K Industries G65-075HC Clevis Hanger B and K Industries G65-100HC Clevis Hanger
Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger.
B and K Industries G65-150HC Clevis Hanger B&K C13-200HC 2-Hole Pipe Strap Elkhart 83003 2-Hole Tube Strap
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Contractor Pack - Bagged
B&K C22-075HC J-Nail Pipe Strap B and K G72-100HC Split Ring Hangers B&K G86-800HC Stud Plate
Provides quick nail support. B & K Ring Hanger, Split, 1 in Opening, Malleable Iron, Galvanized Protects pipes and wiring installation.
B&K P20-250HC Perforated Hanger Tape B and K Industries P25-100HC Pipe Clamp B and K V30-200HC Pipe Hangers
Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction. Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths.
B and K Industries G10-100HC Pipe Hook B&K G18-075HC 1-Hole Pipe Strap B and K Industries G65-200HC Clevis Hanger
Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated. Galvanized steel one-hole strap to secure pipe.  One hole for use with nails or screws to ensure stable fit in tight areas. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger.
HOOK J 10PK 1/2IN             B and K Industries V30-300HC Pipe Hanger B and K Industries C10-050HC Pipe Hook
HOOK J 10PK 1/2IN
Our Price: $2.39
Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use.
B and K C10-075HC Pipe Hooks B&K C13-038HC 2-Hole Pipe Strap B and K V30-400HC Pipe Hangers
Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths.
B and K Industries C10-100HC Pipe Hook KBI SNX Snap-Fix Pipe Repair Coupling Elkhart 83005 2-Hole Tube Strap
Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use. NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. Contractor Pack - Bagged
Worldwide Sourcing TC-15 Flexible Test Caps Elkhart 83006 2-Hole Tube Strap KBI SNX Snap-Fix Pipe Repair Coupling
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Contractor Pack - Bagged NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded.
B and K G72-125HC Split Ring Hangers B and K G72-150HC Split Ring Hangers Genova 500 Tubing Strap
B & K Ring Hanger, Split, 1-1/4 in Opening, Malleable Iron, Galvanized B & K Ring Hanger, Split, 1-1/2 in Opening, Malleable Iron, Galvanized Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included.
Genova 500 Tubing Strap Plumb Pak PP855-8 Pipe Strap Worldwide Sourcing NHC-150 No Hub Couplings
Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included. 3/4'" x 10'. For hanging pipes, fastening faucets and valves, repair jobs and more. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
B and K G72-200HC Split Ring Hangers Worldwide Sourcing TC-2 Flexible Test Caps Fernco PQC-101 Qwik Caps
B & K Ring Hanger, Split, 2 in Opening, Malleable Iron, Galvanized For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
KBI Flo Control ProGuard Tube To Pipe Adapter Worldwide Sourcing FC56-1515 Flexible Couplings Worldwide Sourcing NHC-22 No Hub Couplings
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-1/2 in Length X 1-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Worldwide Sourcing TC-150 Drain Pipe Connectors Fernco PNH-150 Flexible Pipe Coupling American Valve P230 1/2 PVC Fitting
Used to extend, alter or repair any combination of 1-1/4" or 1-1/2"  brass or plastic drain pipes. For above ground use only. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. AMERICAN Valve Pipe Tee, 1/2 in Nominal Size, Compression x Compression x NPT, 0.83 in Inside Dia, 1.85 in Outside Dia, 5 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F
Worldwide Sourcing NHC-33 No Hub Couplings KBI SNX Snap-Fix Pipe Repair Coupling Worldwide Sourcing FC56-22 Flexible Couplings
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
B&K P20-500HC Perforated Hanger Tape Fernco PQC-102 Qwik Caps Oatey 33400 Mechanical Test Plug
Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
Fernco PNH-215 Pipe Reducing Coupling KBI Flo Control ProGuard Tube To Pipe Adapter American Valve P230 3/4 PVC Fitting
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 3/4 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 2-1/2 in Length X 2-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries AMERICAN Valve Pipe Tee, 3/4 in Nominal Size, Compression x Compression x NPT, 1.04 in Inside Dia, 2.05 in Outside Dia, 5.2 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F
Genova 52105 Tube Hanger Worldwide Sourcing TC-3 Flexible TestCaps Genova 52107 Tube Hanger
Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling. For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling.
B and K Industries 160-602 Pipe Repair Clamp B and K 160-603 Pipe Repair Clamps Worldwide Sourcing FC56-15125 Flexible Couplings
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing FC56-215 Flexible Coupling Worldwide Sourcing KJ-020 No Hub Coupling Fernco PTC-150 Flexible Tube Coupling
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Quick, easy way to extend, alter or repair any combination of 1-1/2" or 1-1/4" brass or plastic drain pipe. Whether connecting brass or plastic, the PVC material is is formulated to provide a reliable connection that can be installedin minutes. Carded.
Worldwide Sourcing NHC-44 No Hub Couplings Fernco PNH-33 Flexible Pipe Coupling NDS CPT-0500-S PVC Compression Run Tees
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards.
B&K C20-124HC Pipe Strap B and K 160-604 Pipe Repair Clamps NDS CPT-0500-T PVC Compression Run Tees
Copper plated 24 gauge strapping with perforated holes to be used for securing any size pipe.  Corrosion resistant, for indoor & outdoor use. Allows custom straps to be fabricated. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. NDS Pipe Tee, 1/2 in Nominal Size, Compression x Threaded, 0.86 in Inside Dia, 1.81 in Outside Dia, 5 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified
KBI Flo Control ProGuard Tube To Pipe Adapter Oatey 33401 Mechanical Test Plug Fernco PQC-103 Qwik Caps
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 5-1/2 in Length X 5-1/2 in Width X 3 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
Worldwide Sourcing 22U-139 Flexible Donut Worldwide Sourcing 22U-205 Flexible Donut Fernco 1056 Flexible Pipe Stock Coupling
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco PDTC150 Drain and Trap Connectors Fernco P22U-139 Compression Reducing Donut Fernco PNH-22 Flexible Pipe Coupling
Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
B and K 160-605 Pipe Repair Clamps Worldwide Sourcing KJ-005 No Hub Couplings Worldwide Sourcing KJ-009 No Hub Couplings
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Fernco 1056 Flexible Pipe Stock Coupling Fernco PNH-44 Flexible Pipe Coupling Fernco PQC-104 Qwik Caps
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
Worldwide Sourcing TC-4 Flexible Test Caps Worldwide Sourcing FT-150 Flexible Trap Worldwide Sourcing DTC-150 Drain Pipe Connectors
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Replaces 1-1/4" or 1-1/2" plastic or metal drain traps. For above ground use only. Connects 1-1/4" or 1-1/2" common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only.
Oatey 33402 Mechanical Test Plug Worldwide Sourcing PMB-424 Pipe Straps Worldwide Sourcing FC56-33 Flexible Couplings
Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG 3/4" x 10'. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing 33U-305 Flexible Donut NDS CPT-0750-S PVC Compression Run Tees Fernco 1056 Flexible Pipe Stock Coupling
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco 1059 Flexible Pipe Coupling Fiber Fix 4006 Pipe Repair Wrap NDS CPT-0750-T PVC Compression Run Tees
Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Single use repair wrap. Hardens instantly when it comes in contact with moisture. No tools required. Latex gloves included. NDS Pipe Tee, 3/4 in Nominal Size, Compression x Threaded, 1.09 in Inside Dia, 2.01 in Outside Dia, 5-3/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified
Worldwide Sourcing FC56-32 Flexible Couplings Worldwide Sourcing FC56-44 Flexible Couplings Worldwide Sourcing 44U-405 Flexible Donuts
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-021 Flexible Coupling Fernco P33U-305 Compression Red Donuts B&K G20-524HC Pipe Strap
For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.
Plumb Pak PP840-1 Pipe Repair Clamps Worldwide Sourcing FC56-315 Flexible Couplings Worldwide Sourcing QL-150 Flexible Elbows
Adjustable to 3/8"-3/4" I.P.S., 1/2" - 1" copper. Includes nuts, bolts, and gasket. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing 33U-139 Flexible Donut Worldwide Sourcing 33U-205 Flexible Donut Worldwide Sourcing 44U-305 Flexible Donut
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing DTC-215 Drain Pipe Connectors Worldwide Sourcing KJ-014 Flexible Couplings Worldwide Sourcing KJ-015 Flexible Couplings
Connects 1-1/4" or 1-1/2" common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-016 Flexible Couplings Worldwide Sourcing KJ-018 Flexible Couplings Worldwide Sourcing KJ-019 Flexible Couplings
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco 1056 Flexible Pipe Reducing Stock Coupling Fernco 1056 Flexible Pipe Stock Coupling Fernco P22U-205 Compression RedDonuts
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
Fernco P33U-205 Compression Reducing Donut Fernco 1056 Flexible Pipe Reducing Stock Coupling Fernco PFT150 Flexible PVC Traps
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Replaces 1-1/4" or 1-1/2" plastic or metal drain traps. The flexible PVC material adjusts to the pipe's misalignment and installs securely creating a a leak-free connection. Resists freeze damage.  Squeezes to clean; no drain tools or cleaners needed. carded
Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling B and K 160-606 Pipe Repair Clamps
Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
B and K 160-607 Pipe Repair Clamps B and K 160-608 Pipe Repair Clamps NDS CPT-1000-T PVC Compression Run Tees
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. NDS Pipe Tee, 1 in Nominal Size, Compression x Threaded, 1.31 in Inside Dia, 2.27 in Outside Dia, 5-5/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified
American Valve P230 1 PVC Fitting Oatey 33403 Mechanical Test Plug TAPE SILICONE 1INX14FT
TAPE SILICONE 1INX14FT
Our Price: $6.99
AMERICAN Valve Pipe Tee, 1 in Nominal Size, Compression x Compression x NPT, 1.31 in Inside Dia, 2.4 in Outside Dia, 5.65 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG Miracle Wrap self-fusing silicone tape. Measures 1" X 14'. Perfect for any outdoor and indoor DIY project including sealing leaks, repairing wiring, renewing grips, and waterproof connections.
Fernco 1002 Flexible Pipe Reducing Stock Coupling Worldwide Sourcing FC56-43 Flexible Coupling Fernco 1056 Flexible Pipe Reducing Stock Coupling
Series 1002 designed for clay to cast iron or plastic. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco 1006 Flexible Pipe Stock Coupling Fernco PQL-150 Flexible Dwv Pipe Elbow Mintcraft HCMAN06 Hose Clamps
Series 1006 designed for concrete to cast iron, plastic, copper, steel or lead.  Specially formulated PVC compound positively seals any sewer and drain connection Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Worldwide Sourcing QL-200 Flexible Elbows Worldwide Sourcing KJ-001 Flexible Couplings Worldwide Sourcing KJ-002 Drain Pipe Connectors
Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Use to extend, alter or repair drain pipes. Can be used for installation of condensate lines on air conditioners. Not for use in potable water applications.
Worldwide Sourcing KJ-004 Drain Pipe Connectors Fernco PDTC215 Drain and Trap Connectors Fernco P33U-139 Compression Reducing Donut
Use to extend, alter or repair drain pipes. Can be used for installation of condensate lines on air conditioners. Not for use in potable water applications. Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
Fernco P44U-405 Compression Red Donuts Fernco 1001 Flexible Pipe Stock Coupling Fernco 1060 Flexible Pipe Coupling
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Series 1001 designed for clay to clay. Specially formulated PVC compound positively seals any sewer and drain connection. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
Mintcraft HCMAN04 Hose Clamps Fernco 1056 Flexible Dwv Pipe Reducing Coupling Ideal Tridon Micro-Gear 62M Worm Gear Hose Clamp
1-piece stainless steel housing and band in precision engineered, interlocked construction. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Tiny, tough, precision engineered clamps provide tenacious connections on small diameter hose and tubing. Slim-line construction eases installation in confined areas. 5/16" wide band, 1/4" hex- head screw, 5/16" wide housing.
B and K 160-703 Pipe Repair Clamps B and K 160-704 Pipe Repair Clamps Fiber Fix 4013 Pipe Repair Wrap
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Single use repair wrap. Hardens instantly when it comes in contact with moisture. No tools required. Latex gloves included.
KBI Flo Control ProGuard Tube To Pipe Adapter Worldwide Sourcing QT-150 Flexible Tees Worldwide Sourcing 44U-205 Flexible Donut
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1-1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 3 in Length X 1-3/4 in Width X 5-1/2 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-008 Flexible Coupling Worldwide Sourcing KJ-010 No Hub Couplings Fernco PQT-150 Flexible Pipe Tee
For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
Fernco PQL-200 Flexible Dwv Pipe Elbow Fernco 1059 Flexible Pipe Coupling Fernco 1056 Flexible Pipe Stock Coupling
Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Oatey 43789 Dwv Saddle Tee Kit Worldwide Sourcing QT-200 Flexible Tees Worldwide Sourcing 44U-139 Flexible Donut
Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-006 No Hub Couplings Worldwide Sourcing KJ-013 Flexible Couplings Genova 61231 Dwv Saddle Tee
Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Solvent welds directly onto the side of a 3" pipe to provide a simple way of connecting a branch into a drain pipe. The inlet is constructed to accept a 2" fitting over its outside diameter or an 1-1/2" pipe into its inside diameter. CAN BE GLUED WITH PVC CEMENT.
Fernco 1060 Flexible Pipe Coupling Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling Fernco P1056-100 Drain Pipe Connectors
Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead. Ideal for any drain application that uses  plastic, PVC, CPVC, or copper drain pipes. Makes for fast and easy installation of condensate lines on air conditioning units. Not for use in pressure or POTABLE water applications. Carded.
Fernco P1056-075 Drain Pipe Connectors Worldwide Sourcing QL-300 Flexible Elbows Worldwide Sourcing KJ-011 Flexible Couplings
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead. Ideal for any drain application that uses  plastic, PVC, CPVC, or copper drain pipes. Makes for fast and easy installation of condensate lines on air conditioning units. Not for use in pressure or POTABLE water applications. Carded. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-017 Flexible Coupling Fernco 1002 Flexible Pipe Stock Coupling Fernco P44U-205 Compression Reducing Donut
For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1002 designed for clay to cast iron or plastic. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
Fernco P44U-305 Compression Red Donuts Fernco PQT-200 Flexible Pipe Tee Fernco 1056 Flexible Pipe Reducing Stock Coupling
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco 1056 Flexible Pipe Reducing Stock Coupling Mintcraft HCMSS08 Hose Clamps Mintcraft HCMSS04 Hose Clamps
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling Mintcraft HCRAN06-3L Hose Clamp Mintcraft HCRAN08 Hose Clamps
Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Fiber Fix 4020 Pipe Repair Wrap KBI Flo Control ProGuard Tube To Pipe Adapter Fernco 1056 Flexible Pipe Reducing Stock Coupling
Single use repair wrap. Hardens instantly when it comes in contact with moisture. No tools required. Latex gloves included. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-3/4 in Length X 2 in Width X 2-1/4 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco 1059 Flexible Pipe Coupling Mintcraft HCRAN24 Hose Clamp Fernco P44U-139 Compression Reducing Donut
Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. 1-piece stainless steel housing and band in precision engineered, interlocked construction. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
Oatey 43791 Dwv Saddle Tee Kit B&K G20-1024HC Pipe Strap B and K Industries P02-300HC J-Hook
Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit.
Mintcraft HCRAN20 Hose Clamp Plumb Pak PP855-30LF Saddle Tee Fernco 1060 Flexible Pipe Coupling
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1/2" F.I.P. outlet for 1/2" I.P.  or 3/4" O.D. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
Mintcraft HCRAN12 Hose Clamps Mintcraft HCRAN16-3L Hose Clamp Mintcraft HCRAN32-3L Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Fernco 1070 Flexible Pipe Stock Coupling Mintcraft HCRAN10 Hose Clamps B and K 160-705 Pipe Repair Clamps
Series 1070 designed for polyethylene to plastic pipe. Available in 3", 4", 6", and 8" sizes. Connects corrugated polyethylene drainage and irrigation systems to sewere, drain or DWV plastic pipe. Conforms to ASTM D5926. 1-piece stainless steel housing and band in precision engineered, interlocked construction. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
Mintcraft HCRAN28 Hose Clamps Oatey 43793 Dwv Saddle Tee Kit Oatey 43795 Dwv Saddle Tee Kit
1-piece stainless steel housing and band in precision engineered, interlocked construction. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings.
Worldwide Sourcing KJ-007 Flexible Coupling Worldwide Sourcing KJ-012 Flexible Coupling Fernco 1070 Flexible Pipe Stock Coupling
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1070 designed for polyethylene to plastic pipe. Available in 3", 4", 6", and 8" sizes. Connects corrugated polyethylene drainage and irrigation systems to sewere, drain or DWV plastic pipe. Conforms to ASTM D5926.
Ideal Tridon Micro-Gear 62M Worm Gear Hose Clamp Fernco PQL-300 Flexible Dwv Pipe Elbow Mintcraft HCRAN36 Hose Clamps
Tiny, tough, precision engineered clamps provide tenacious connections on small diameter hose and tubing. Slim-line construction eases installation in confined areas. 5/16" wide band, 1/4" hex- head screw, 5/16" wide housing. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Ideal Tridon 6260450 Worm Gear Hose Clamp Ideal Tridon 6260650 Worm Gear Hose Clamp B and K 160-706 Pipe Repair Clamps
Ideal Tridon Worm Gear Hose Clamp, Series: 6260450, 7/32 - 5/8 in Nominal Opening, NO 4 Trade, 5/16 in Width, 1/4 in Hex Bolt, Grade: 200/300, Stainless Steel Band, 200/300 Stainless Steel Bolt Ideal Tridon Worm Gear Hose Clamp, Series: 6260650, 5/16 - 7/8 in Nominal Opening, NO 6 Trade, 5/16 in Width, 1/4 in Hex Bolt, Grade: 200/300, Stainless Steel Band, 200/300 Stainless Steel Bolt Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
NDS CPT-1250-T PVC Compression Run Tees NDS CPT-1500-T PVC Compression Run Tees Oatey 38707 Pipe Guards
NDS Pipe Tee, 1-1/4 in Nominal Size, Compression x Threaded, 1.7 in Inside Dia, 2.67 in Outside Dia, 6-1/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified NDS Pipe Tee, 1-1/2 in Nominal Size, Compression x Threaded, 1.7 in Inside Dia, 3.01 in Outside Dia, 6-3/4 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Made of polyethylene. Protects copper and plastic in concrete. For non code installations. Will not attack plastic pipe. Polyethylene Sleeving is 4 Mils thick. Fits 1/2", 3/4" and 1" pipes. Boxed.
Mintcraft HCRAN52 Hose Clamps Oatey 38708 Pipe Guards Mintcraft HCRAN40 Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. Made of polyethylene. Protects copper and plastic in concrete. For non code installations. Will not attack plastic pipe. Polyethylene Sleeving is 4 Mils thick. Fits 1/2", 3/4" and 1" pipes. Boxed. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
B and K 160-707 Pipe Repair Clamps HEAT WRAP FIBERFIX 2IN X 70IN PATCH RIGID FIBERFIX MULTI PK
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. FiberFix combines industrial-strength fibers and specialized resin into a repair wrap that hardens like steel?made for high-temperature applications. Simply activate the repair wrap in water, wrap tightly around the broken object, and cure with heat. Heat cued, insujlative, heat resistant ujp to 850 degees F, air and water tight. FiberFix combines industrial-strength fibers and specialized resin into a repair patch that hardens like steel?for flat surface repairs. Simply place the patch over your damaged surface, cure with direct sunlight or UV flashlight, and your item will be repaired within 5-15 minutes.
NDS CPT-2000-T PVC Compression Run Tees Fernco 1059 Flexible Pipe Coupling Mintcraft HCRSS12 Hose Clamps
NDS Pipe Tee, 2 in Nominal Size, Compression x Threaded, 2.41 in Inside Dia, 3.72 in Outside Dia, 7-1/2 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRAN44 Hose Clamps Fernco FP-P46 Pow-R Patch Epoxy Patches Fernco 1060 Flexible Pipe Coupling
1-piece stainless steel housing and band in precision engineered, interlocked construction. Pow-R-Patch is a complete repair kit that includes a pre-coated fiberglass cloth in a self-contained mixing pounc and a pair of protective gloves. Use on wet or dry surfaces. Will adhere to metal, wood, fiberglass,plastic and more. Flat or Round surface repairs. Holds up to 100 psi. Heat resistant to 425? F. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
Fernco FPW248CS Pow-R Wrap Mintcraft HCRAN48 Hose Clamps Mintcraft HCRAN56 Hose Clamps
Pow-R-Wrap is a water-activated fiberglass wrap that permanently repairs wet or dry pipe of hose. Self-contained kit includes everything you need to repair a magnitude of applications. Cures in 30-60 minutes. Works on or corroded pipes. Works underwater- fresh or salt. Ideal for repairing copper, plastics, PVC pipe, rubber, fiberglass, galvanized and concrete. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS10-3L Hose Clamps Mintcraft HCRSS08-3L Hose Clamps Mintcraft HCRSS06-3L Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Fernco XJ-150 Flexible Pipe Expansion Joint Coupling Worldwide Sourcing QT-300 Flexible Tees Worldwide Sourcing QT-400 Flexible Tees
Allows for thermal expansion and contraction of drain, waste and vent pipes and inside rain water conductor systems. Unique one-piece construction, internal stops for positive positioning, no sliding parts to malfunction, no packing to jam, freeze or leak. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-003 Corrugated Flex Coupling Mintcraft HCRSS28 Hose Clamps Mintcraft HCRSS24 Hose Clamps
For specific use underground. Designed with ring stopper on the inside of the coupling to connect corrugated polyethylene drainage pipe and irrigation systems to plastic DWV pipe. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMOPS 109, PS90, & CSA B602. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS32 Hose Clamp Fernco PQT-300 Flexible Pipe Tee Mintcraft HCRSS16 Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS20 Hose Clamps B and K 160-708 Pipe Repair Clamps Mintcraft HCRSS36 Hose Clamp
1-piece stainless steel housing and band in precision engineered, interlocked construction. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Worldwide Sourcing FC56-64 Flexible Couplings B and K P02-400HC J-Hooks Fernco 1003 Flexible Pipe Coupling
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. Series 1003 designed for clay to asbestos cement fibre or ductile iron. Specially formulated PVC compound positively seals any sewer and drain connection.
Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp
Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 3/8 - 7/8 in Nominal Opening, NO 6 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 7/16 - 1 in Nominal Opening, NO 8 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1/2 - 1-1/16 in Nominal Opening, NO 10 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water
Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp
Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1/2 - 1-1/4 in Nominal Opening, NO 12 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 11/16 - 1-1/2 in Nominal Opening, NO 16 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 3/4 - 1-3/4 in Nominal Opening, NO 20 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water
Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Mintcraft HCRAN64 Hose Clamp
Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1 - 2 in Nominal Opening, NO 24 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1-1/4 - 2-1/4 in Nominal Opening, NO 28 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Worldwide Sourcing QL-400 Flexible Elbows Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Mintcraft HCRSS40 Hose Clamp
Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Mintcraft HCRAN72 Hose Clamps Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. 1-piece stainless steel housing and band in precision engineered, interlocked construction. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
Mintcraft HCRAN80 Hose Clamps Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Mintcraft HCRSS48 Hose Clamp
1-piece stainless steel housing and band in precision engineered, interlocked construction. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
B and K Industries P01-125HC Baby J-Hook B and K P02-150HC J-Hooks Fernco PQL-400 Flexible Dwv Pipe Elbow
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
Mintcraft HCRAN96 Hose Clamps Mintcraft HCRAN88 Hose Clamps Worldwide Sourcing FC56-66 Flexible Couplings
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco 1056 Flexible Pipe Stock Coupling B and K Industries P02-200HC J-Hook Mintcraft HCRSS56 Hose Clamp
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS44 Hose Clamps Fernco XJ-3 Flexible Pipe Expansion Joint Coupling B and K Industries G65-125HC Clevis Hanger
1-piece stainless steel housing and band in precision engineered, interlocked construction. Allows for thermal expansion and contraction of drain, waste and vent pipes and inside rain water conductor systems. Unique one-piece construction, internal stops for positive positioning, no sliding parts to malfunction, no packing to jam, freeze or leak. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger.
Mintcraft HCRSS52 Hose Clamp B and K Industries C83-075HC Pipe Hanger Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
1-piece stainless steel housing and band in precision engineered, interlocked construction. Copper plated bell hanger for use hanging from a wall, joist, or stud.  Corrosion resistant.  Copper plated screw to secure hanger to substrate and 2 additional copper plated screws to secure pipe to hanger. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
Fernco 1056 Flexible Pipe Reducing Stock Coupling Fernco PQT-400 Flexible Pipe Tee B and K Industries C83-100HC Pipe Hanger
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Copper plated bell hanger for use hanging from a wall, joist, or stud.  Corrosion resistant.  Copper plated screw to secure hanger to substrate and 2 additional copper plated screws to secure pipe to hanger.
Mintcraft HCRSS72 Hose Clamps Mintcraft HCRSS64-3L Hose Clamps Mintcraft HCRAN104 Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Mintcraft HCRSS80 Hose Clamp Mintcraft HCRSS88 Hose Clamps
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp B and K Industries C72-038HC Ring Hanger
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. B & K Ring Hanger, Split, 3/8 in Opening, Malleable Iron, Copper Plated
B and K Industries C83-050HC Pipe Hanger Mintcraft HCRSS96 Hose Clamps GT Water SAFE-T-SEAL Test Plug
Copper plated bell hanger for use hanging from a wall, joist, or stud.  Corrosion resistant.  Copper plated screw to secure hanger to substrate and 2 additional copper plated screws to secure pipe to hanger. 1-piece stainless steel housing and band in precision engineered, interlocked construction. GT Water Test Plug, Series: SAFE-T-SEAL, 1-1/4 - 2 in Nominal, Includes 36 in Strap With Ring
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Mintcraft HCRSS104 Hose Clamp B and K C72-050HC Ring Hangers
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. 1-piece stainless steel housing and band in precision engineered, interlocked construction. B & K Ring Hanger, Split, 1/2 in Opening, Malleable Iron, Copper Plated
B and K C82-050HC Pipe Hangers B and K C82-075HC Pipe Hangers B and K C72-075HC Ring Hangers
Mueller Pipe Hanger, Milford, 1/2 in Opening, Steel, Copper Plated, 6 in Length, Includes: Nails Mueller Pipe Hanger, Milford, 3/4 in Opening, Steel, Copper Plated, 6 in Length, Includes: Nails B & K Ring Hanger, Split, 3/4 in Opening, Malleable Iron, Copper Plated
B and K Industries C82-100HC Pipe Hanger GT Water SAFE-T-SEAL Waffle Body Test Plug B and K Industries C72-100HC Ring Hanger
Mueller Pipe Hanger, Milford, 1 in Opening, Steel, Copper Plated, 6 in Length, Includes: Nails GT Water Test Plug, Waffle Body, Series: SAFE-T-SEAL, 3 - 4 in Nominal, Inlcludes 36 in Strap With Multipurpose Handle With Tool B & K Ring Hanger, Split, 1 in Opening, Malleable Iron, Copper Plated
   
 
1