Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR
Choose a sub category:
SHOWER HEADS SHOWER HEAD PARTS & ACCESS. TUB SPOUTS
TUB & SHOWER DRAINS/PARTS
Sort By:
1
Oatey 43561 Snap-In Floor Drain GASKET TUB DRAIN CARTRIDGE    COVER DRAIN CLIP SHOWER3-3/8IN
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Rubber. For tip-toe style bathtub stoppers. 2-1/16" x 1" x 1/4". Designed to fit 3-3/8" shower drains.
Oatey 42042 Tile Rings Oatey 43565 Snap-In Floor Drain Danco 80001 Tub Spout Ring
4-1/4"  x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID.
STRAINER TUB SNAP 2IN CHROME  Screw-Tite 42358 Replacement Strainer Oatey 43569 Snap-In Floor Drain
Steel construction, 2" diameter. Grid-style. For screw-on tile shower drains, 4" snap-in drains and 2" or 3" general purpose drains. Replacement for Oatey 42210, 42213, 42399, 42404, 42218, 42219, 43566, 43567, 43580, 43581, 43578, 43579. Bagged. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
FLANGE SCREW TUB/SHOWER DELTA Danco 80002 Tub Spout Ring Plumb Pak PP826-64 Strainer Dome Cover
Install your faucet handle escutcheon plate with these flange screws for Moen and Delta. Metal construction for durability. Includes two 2-1/2 in. screws and two 1-3/4 in. screws Chrome finish. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID. Strainer dome cover with screw.
Plumb Pak PP826-4 Flat Tub Overflow Washer STRAINER SHOWER 3-3/8IN CHROME PLATE OVERFLOW 1-HOLE CHROME
Plumb Pak Tub Overflow Washer, Flat, Sponge Steel construction, use with 3-1/8" drains. Screws not included. Round design with screw holes 2" center-to-center. Includes adapter to replace one or two hole plates. Screws included.
Plumb Pak PP22612 Face Plate Screw Danco 50673B Volume Control Washer FLANGE SHOWER ARM CHROME
Chrome plated face plate screws. For shower heads with standard 1/2" IPS connection. Bagged. Metal construction. Fits 1/2" IPS connection. Set screw style.
FLANGE ARM SHOWER W/SCREW     Mintcraft B1140WH Shower Arms Plumb Pak PP825-50 Shower Drain Grid
Sized to slip over shower arm and has an adjustable set screw for a secure fit. Polished chrome finish. Standard 1/2", Plastic. Overall length 7". 3-5/16" O.D. 6.88" h x 4-3/4" w.
DIVERTER TUB SPOUT REPAIR KIT BASKET SHOWER HAIR CATCHER    SHOWER DRAIN 4-1/4 SNAP IN SS
Includes lift knob, repairs diverters in most tub spouts. Complete kit. Durable plastic construction. Designed to fit the Danco hair catcher for shower drains (Model #?s: 10533, 10529). Stops hair and other particles from going down the drain 4-1/4". Fits cast iron, plastic an clay tile pipes, prongs can be adjusted to fit drain.
Oatey 42787 Shower Drain HOSE SHOWER REPLMNT WHITE 60IN SHOWER ARM W/FLANGE 6 BRSH NIC
2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Stainless steel construction. 6" shower arm fit 1/2" pipe thread.
Plumb Pak PP606-23 Clevis Plunger Linkage Assembly B & K 133-106 Shower Drain World Wide Sourcing PMB-020 Shower Adapters
For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger. For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid. Shower flow adjuster. 1/2" IPS.
Plumb Pak PP825-7 Shower Arm Diverter World Wide Sourcing 24500 Bathtub Spouts World Wide Sourcing 24354 Bath Drain Trip Levers
Shower arm diverter, plated plastic, connects personal shower and shower head. 1/2" F.I.P. x 1/2" M.I.P. x 1/2" M.I.P Zinc body; chrome plated finish with reducer bushing. For 3/4'' or 1/2'' pipe. Zinc body. Screws included.
DRAIN STOPPER RAPIDFIT CHROME Mintcraft B1140CP Shower Arms Danco 80991 Round Bath Drain Overflow Plate With Lever
Plastic. Touch-toe design, Standard 1/2", Plastic. Overall length 7". Includes screws. 2" center to center holes. Carded.
TUB STOP TOE TOUCH CHROME     Plumb Pak PP825-8 Shower Adapter Control Plumb Pak PP863-50 Replacement Tip Toe Cartridge
Plastic construction. Touch-toe design pushed to open and close. 2? diameter. Grid style to keep drain free from debris. Includes 3/8?and 5/16 screw studs. Plated plastic. Flow control and shut off. Threaded shaft.
Oatey Snap-Tite Round Drain Strainer Plumb Pak PP826-10 1-Hole Trip lever Style Tub Face Plate TUB SPOUT FRONT CONNECT CHROME
4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Chrome Plated Universal design that is compatible with most faucet brands. It features a metal construction that provides strength and durability. Fits 1/2? or 3/4? IPS connections. No diverter.
STOP POPUP BATH UNIV ORBRONZE Oatey 42097 101 PS Shower Drain Whedon TV1C Shower Flow Controller
Constructed of plastic for long-lasting durability. Universal design replaces most stoppers. Measures 5-3/8"  long with an outside diameter of 1-5/16" at the top. Fits lavatory sinks. Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Installs easily between standard shower arm and head.  Push button control easily adjusts spray force from full to a trickle, great for saving while lathering, shampooing, etc. Made in USA
BRACKET SHOWER RPLCMT H/H WHT Oatey 101 PNC Shower Drain Oatey 42086 101 PS Shower Drain
Attaches to standard 1/2" IPS connection (standard shower arm) and allows hand held shower to be used as either wall mount or hand held. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced. Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
Plumb Pak PP825-51 Shower Drain Danco 50677B Volume Control Washer Plumb Pak PP826-11 2-Hole Trip Lever Style Tub Face Plate
Fits 2" outlet. For shower heads and arms. Bagged. Plumb Pak Tub Face Plate, 2-Hole, Blank Overflow, Suitable For Use With: Bath Drain, Chrome Plated
Plumb Pak PP826-21 Tip Toe Replacement Cartridge Plumb Pak PP826-1 2-Hole Trip Lever Style Tub Face Plate Oatey Snap-Tite Round Drain Strainer
Threaded shaft. Trip lever for drain control. Includes screws. 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded.
Oatey 42093 101 PS Shower Drain SHOWER ARM W/FLANGE 6 CHROME  SHOWER HEAD HH 3FNC WHT 2.99IN
Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Stainless steel construction. 6" shower arm fit 1/2" pipe thread.
Plumb Pak PP828-62 Shower Arm Mount World Wide Sourcing 24501-3L3L Bathtub Spout Plumb Pak PP22510 Shower Arm With Flange
Shower arm mount. Zinc swivel ball. Tapped with 3/4" IPS with internal 3/4" x 1/2" face bushing.  Chrome plated zinc body. 1/2" IPS.
Plumb Pak PP825-10 Shower Arm With Flange Danco 37680B Bath Drain Gasket Oatey Snap-Tite Square Drain Strainer
1/2" IPS. Rubber washer for Toe Touch drain assembly. 4-1/4" x 4-1/2" square snap-in strainer. For use with the Oatey 130 Series drains. Carded.
DRAIN ASSEM TUB PFISTER CHRM  VALVE SHOWER DIVERTER         BRACKET SHOWER RPLCMT H/H BN
VALVE SHOWER DIVERTER
Our Price: $8.99
Brass construction, 16 TPI. Comes with strainer and bath shoe. Attaches between existing shower arm and head to connect a handheld shower. Switches between wall mounted and handheld shower using side dial. Polished chrome finish. Attaches to standard 1/2" IPS connection (standard shower arm) and allows hand held shower to be used as either wall mount or hand held.
SHOWER HEAD 3FNC WHT 2.70IN   SHOWER HOSE STNLS STEEL 72IN  Oatey 101 PNC Shower Drain
Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced.
Mintcraft B42014 Personal Shower Hoses Mintcraft B1105WH Shower Arm Brackets Plumb Pak PP825-30 Bathtub Spout With Reducer Bushing
72" PVC hose with metal hex nuts. Includes 2 pc washers and pipe tape. ABS construction. Metal ball joint. Connects to 3/4" or 1/2" IPS pipe.
World Wide Sourcing 26629 Bathtub Spout Oatey 42202 Shower Drains SHOWER ARM W/FLANGE 8IN CHROME
1-3/4" adjustable telescoping fit. Slide connect allows for fast installation for 1/2" copper stub.  Chrome plated zinc body. Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Brass construction. 8" shower arm designed to fit standard 1/2" pipe thread.
LINKAGE TUB DRAIN ASSEMBLY    DRAIN STOP LIFT/TURN CHROME   OVERFLOW PLATE DRAIN BRSH NIC
Use with trip-lever assemblies. Restores open-close feature to drain assembly. Includes plunger assembly: yoke and nut. Heavy-duty brass stopper and shaft. Two thread sizes: 5/16" one end and 3/8" on the other. Replaces foot operated stoppers made by Rapid fit 1200 series, Sterling, Casper's and Duracraft. Steel construction, single-hole style, round body. Includes screw and adapter to fit either 1 or 2-hole applications.
HOSE SHOWER REPLACEMENT 60IN  SHOWER HEAD 5FNC WHT 3.35IN   Oatey 42213 Shower Drain
Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes.
Mintcraft B1105CP Shower Arm Brackets Oatey Snap-Tite Round Drain Strainer VALVE CONTROL SHOWER CHROME
ABS construction. Metal ball joint. 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. Brass construction, For use between shower arm and head. 1/2" FIP x 1/2" MIP. Small trickle of water reminds user to shut water off at valve.
TUB SPOUT W/DIVERTER CHROME   Oatey 130 42210 Shower Drain Oatey 130 42203 Shower Drain
Universal design is compatible with most faucet brands. Features a metal construction that provides strength and durability. Fits 1/2? or 3/4? IPS connections. Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes.
Danco 10533 Drain Stopper Plumb Pak PP826-22 Waste Shoe Washer Oatey 101 PNC Shower Drain
Prevents clogged shower drains by catching hair and debris before they go down the drain. Removable basket for easy cleaning. Universal fit, fits any standard 4" shower drain. Easy installation. Washer for 1-1/2" bath waste strainer. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced.
Plumb Pak PP606-22 Clevis Plunger Linkage Assembly Screw-Tite 42018 Round Strainer Plumb Pak PP825-11 Shower Arm With Flange
For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger. 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. 1/2" IPS.
SHOWER HOSE STRETCH 60-82 CHRM HOSE SHOWER STNLS STL 72IN    Snap-Tite 129 Bathtub Strainer
Stretchable 60-82". Chrome finish Extra long reach with a durable stainless steel construction. Coordinates with stainless steel or polished chrome fixtures. 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded.
Oatey 130 42238 Shower Drain Plumb Pak PP825-30BN Bathtub Spout With Reducer Bushing TUB SPOUT 5IN FRONT DIVERTER
Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Connects to 3/4" or 1/2" IPS pipe. Fits 1/2" IPS threaded connection. Measures 3-3/4" to threads of front connection for a 1/2" pipe. 5" tub spout, metal construction. Chrome finish.
SHOWER HEAD 3FNC CHM 2.70IN   Plumb Pak PP825-10BN Shower Arm With Flange Danco 10529 Shower Drain
1/2" IPS. Prevents clogged shower drains by catching hair and debris before they go down the drain. Removable basket for easy cleaning. Universal fit, fits any standard 4" shower drain. Easy installation.
Mintcraft B1101CP Personal Shower Hoses Plumb Pak PP825-37 Bathtub Spout With Diverter Mintcraft A558215NP-OBB1 Shower Arms
72" mylar hose with metal hex nuts. Includes 2 pc washers and pipe tape. Adjustable for various nipple lengths. 3/4" I.P.S. with 3/4" x 1/2" face bushing. 6" shower arm. Stainless steel construction.
Plumb Pak PP826-10BN 1-Hole Trip lever Style Tub Face Plate TRIM TUB DRAIN TOUCHTOE CHROME SHOWER HEAD 5FNC CHM 3.35IN
Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Brushed Nickel Brass construction, chrome finish. Replaces 1-hole or 2-hole overflow plates. Designed to fit 1-1/2 and 1-7/8" drain shoe sizes. Kit includes overflow plate, bath drain strainer, washer and bushing.
SHOWER HEAD HH 3FNC CHM 2.99IN SHOWER HD 5FNC FLW CNTL 3.90IN Mintcraft A558215CP Shower Arms
6" shower arm. Stainless steel construction.
Plumb Pak PP826-20 Replacement Drain Foot Lock Assembly Plumb Pak PP22620PC Drain Foot Lock Assembly Plumb Pak PP825-38 Slide Connect Bathtub Spout With Reducer Bushing
Push button type with 5/16" thread shaft complete with cartridge and strainer. Push button type with 5/16" thread shaft complete with cartridge and strainer. Zinc die cast front diverter spout. Spout tube connects to 1/2" copper at wall end of spout.
Danco 88702 Bathtub Spout Without Diverter Plumb Pak Cover Up Extra Large Tub Stop TUB SPOUT 1/2SLIP W/DIVRT CHRM
Universal tub spout fits all sizes, easy installation. Includes:  zinc die-cast chrome-plated tub spout, adapters, allen wrench, and plumber's tape. Installs on  all existing connections: 1/2" copper slip fit, 1/2" thread, 1/2" thread in nose, and 3/4" thread. Carded. Eliminates the need to remove the drain strainer or replace the entire drain in order to change and enhance the look of the bath tub drain. Includes extra large, Quick "Cover Up" stopper. Fits most tub drain style except trip lever. Reversible threaded adapter fits common 5/16" and 3/8" drain thread patterns. 1/2" slip connection. Rear connection, metal construction. Includes set screw. Chrome finish.
OVERFLOW PLATE LEVER BRSH NIC SHOWER HEAD ADJUSTABLE SPRAY  Plumb Pak PP7088RB Tubular Waste Shoe
Metal construction, round design with screw holes 2" center-to-center. Trip lever. Includes screws. Wall-mounted shower head is fully adjustable with a maximum output of 1.8 gpm. Side-dial makes it easy to change spray output. Chrome-plated brass housing. For waste and overflow. Fine thread.
Plumb Pak PP825-31 Bathtub Spout With Diverter Delta 1076160PK Diverter Tub Spout Plumb Pak PP825-36 Bathtub Spout With Front End Diverter
Spout for in-the-wall showers. Lift lever diverts water to shower. Returns water flow to tub when water is turned off. Connects to 3/4" IPS at wall end with reducer bushing for IPS pipe. Bathtub shower diverter spout with 1/2" female pipe thread inlet for long pipe nipple. 4-1/8" max nipple length. Carded. Front end mount for nipples extending 4-1/2"-5" from wall. Connects to 3/4" or 1/2" IPS pipe.
Whedon AF205C Bungy Metal Stretch Shower Hose World Wide Sourcing PMB-048 Bathtub Spouts Plumb Pak PP826-1PB 2-Hole Trip Lever Style Tub Face Plate
Stretchable metal shower hose, made with a flexible stainless steel double interlock outer shell and stretchable EPDM inner hose. Works with all standard hand shower systems, standard 1/2" female chrome-plated brass connectors on each end, conical nut with o-ring gripper fits all standard hand shower brackets. Brass barbs. Zinc construction. Shower outlet for hand-held showerhead. 1pc 3/4" tapped connector with internal 3/4" x 1/2" face bushing. Trip lever for drain control. Includes screws.
Plumb Pak PP62-3DSBN Bath Drain Strainer Assembly SPOUT TUB UNI FIT W/O DIV CHM SHOWER HEAD ADJ SPRAY CHM
SHOWER HEAD ADJ SPRAY CHM
Our Price: $15.99
Plumb Pak Tub Drain Plug, Lift and Turn Style, Brushed Nickel Universal fit bath tub spout - w/o front diverter - fits 1/2" copper, 1/2" male threaded or 3/4" male threaded stub outs. Adapters included to fit all the most popular bath tub spout inlets (stub outs).
SHOWER HEAD HH 5FNC CHM 3.35IN Worldwide Sourcing PMB-046 Bathtub Spout Mintcraft B42034 Personal Shower Hoses
Zinc construction. Includes internal 1/2" tapped connector. 72" PVC hose with metal hex nuts. Includes 2 pc washers and pipe tape.
Mintcraft B1180CP Shower Arms Plumb Pak PP22538 Slide Connect Bathtub Spout With Reducer Bushing Plumb Pak PP825-32 Bathtub Spout With Diverter
1/2" IPS. Right angle. Stainless steel construction. Chrome finish. Zinc die cast front diverter spout. Spout tube connects to 1/2" copper at wall end of spout. Chrome with diverter, outlet for personal shower, 3/4" IPS with reducer bushing for 3/4" or 1/2" pipe.
Danco 88703 Tub Spout TUB SPOUT 6 INCH PULL DOWN    Plumb Pak PP863-11 Drain Washer
Fast and easy to install. Adapters to fit all existing connections including 3/4" or 1/2" thread, and 1/2" unthreaded or threaded-end pipe. Contains adapters, Allen wrench, and  plumber's tape. Carded. 6" tub spout is an easy way to update a worn or outdated bathtub. The tub spout is activated by pulling down on the end of the spout, diverting the water from the shower head to the spout. The tub spout features a chrome finish and provides a sleek alternative to the regular diverter tub spout. Durable metal construction. Rubber washer for Foot Lok Stop assembly.
Oatey 42237 Shower Drain World Wide Sourcing PMB-030 Bath Pop-Up Assembly KIT TUB DRAIN TRIM CHROME
KIT TUB DRAIN TRIM CHROME
Our Price: $16.99
Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Worldwide Sourcing Bath Drain Assembly, Lift and Turn, Chrome Plated Metal construction. Includes overflow plate and EZ draim cover. Overflow plate includes adapter to fit both 1 and 2 hole plates. Integral, ergonomic touch activated stopper.
SHOWER HEAD 5FNC BNKL 3.35IN  SHOWER HD 5FNC BELL CHM 4.72IN Oatey 151 Shower Drain
Designed for use with Tile or Marble shower bases.  The low profile design allows for installation in tight spaces.  Two-part drain is designed for use with built-up showers that require a hot mop membrane.  Drains include a 3-1/4" Crown Ring set.
Oatey 42078 101 PS Shower Drain Delta 1079160PK Diverter Tub Spout With HS Connect Plumb Pak PP825-10PB Shower Arm With Flange
Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. 'Add-A-Shower' extra long 5-1/4" diverter threaded tub spout. Carded. 1/2" IPS.
Plumb Pak Cover Up Extra Large Tub Stop Plumb Pak PP826-11DSPB 2-Hole Trip Lever Style Face Plate Plumb Pak PP826-11BN 2-Hole Trip Lever Style Tub Face Plate
Eliminates the need to remove the drain strainer or replace the entire drain in order to change and enhance the look of the bath tub drain. Includes extra large, Quick "Cover Up" stopper. Fits most tub drain style except trip lever. Reversible threaded adapter fits common 5/16" and 3/8" drain thread patterns. Plumb Pak Face Plate, 2-Hole, Trip Lever Style, Suitable For Use With: Bath Drain, Polished Brass Plumb Pak Tub Face Plate, 2-Hole, Blank Overflow, Suitable For Use With: Bath Drain, Brushed Nickel
SPOUT TUB U/F W/DIVRTR CHROME SHOWER ARM FLEXIBLE CHROME    Plumb Pak Foot Lok Stop Bath Drain Assembly With Strainer
Universal-fit bath tub spout with front diverter. Fits 1/2" copper, 1/2" male threaded (front or rear) or 3/4" male threaded stub outs. Adapters included to fit all the most popular bath tub spout inlets (stub outs). Assembly with 5/16" thread small shaft. Complete with strainer. Chrome finish on exposed parts.
Plumb Pak PP22531 Bathtub Spout With Diverter Plumb Pak PP828-47 Replacement Shower Hose Plumb Pak 64W-K Trip Lever Bath Drain
Spout for in-the-wall showers. Lift lever diverts water to shower. Returns water flow to tub when water is turned off. Connects to 3/4" IPS at wall end with reducer bushing for IPS pipe. 84", for hand held shower. Triplever style complete plastic bath drain. Chrome plated exposed trim. Hand tighten slip joint installation, fits all standard size tubs. Includes all nuts and washers.
KIT TUB DRAIN TRIM BRSH NKL   SHOWER HH KIT 3FNC WHT 3.15IN SHOWER ARM FLEXIBLE BNKL
SHOWER ARM FLEXIBLE BNKL
Our Price: $18.99
Metal construction. Includes overflow plate and EZ draim cover. Overflow plate includes adapter to fit both 1 and 2 hole plates. Integral, ergonomic touch activated stopper.
Plumb Pak PP22536 Bathtub Spout With Front End Diverter Whedon AF206C Bungy Metal Stretch Shower Hose Plumb Pak PP825-31BN Bathtub Spout With Diverter
Mobile home spout with front end mount for nipples extending 4-1/2" - 5" from wall, eliminates need to change to shorter nipple. Stretchable metal shower hose, made with a flexible stainless steel double interlock outer shell and stretchable EPDM inner hose. Works with all standard hand shower systems, standard 1/2" female chrome-plated brass connectors on each end, conical nut with o-ring gripper fits all standard hand shower brackets. Brass barbs. Spout for in-the-wall showers. Lift lever diverts water to shower. Returns water flow to tub when water is turned off. Connects to 3/4" IPS at wall end with reducer bushing for IPS pipe.
Plumb Pak PP209064 Trip Lever Bath Drain Assembly Plumb Pak PP826-34 Replacement Strainer Roller Ball Assembly TUB SPOUT W/SHOWER FITTING CHR
1-1/2" O.D. tube size. Replacement assembly. Metal construction, compatible with 3/4 and 1/2" threads as well as 1/2" copper slip and 1/2" thread in nose. Includes diverter, 1/2" personal shower connection, Allen wrench, and plumber's tape.
TOUCH TOE BATH WASTE - PLASTIC SPOUT TUB U/F W/O DIVRTR BNKL SPOUT TUB U/F W/DIVRTR BNKL
Durable plastic tubing. Designed to fit standard-size tubs. Includes all parts needed to replace an existing drain or add a new tub. Universal fit bath tub spout - w/o front diverter - fits 1/2" copper, 1/2" male threaded or 3/4" male threaded stub outs. Adapters included to fit all the most popular bath tub spout inlets (stub outs). Universal-fit bath tub spout with front diverter. Fits 1/2" copper, 1/2" male threaded (front or rear) or 3/4" male threaded stub outs. Adapters included to fit all the most popular bath tub spout inlets (stub outs).
SHOWER HH KIT 1FNC CHM 2.80IN Oatey 151 Shower Drain Danco 10315 Decorative Fit Bathtub Spout With Diverter
Designed for use with Tile or Marble shower bases.  The low profile design allows for installation in tight spaces.  Two-part drain is designed for use with built-up showers that require a hot mop membrane.  Drains include a 3-1/4" Crown Ring set. 6" universal decorative tub spout.
Plumb Pak Lift 'N Turn Bath Drain Assembly Plumb Pak PP826-65 Trip lever Style Trim Kit Danco 89249 Bathtub Spout With Diverter
Precision molded construction. 4-1/4" overflow vertical adjustment. 2" waste shoe horizontal adjustment. 2" long brass face plate screws. For 1-3/8" or 1-1/2" bath drains. Includes face plate, cotter pin, screws, dome strainer cover, and strainer. Installs on all existing connections: 1/2" copper slip fit, 1/2" thread, 1/2""thread in nose, and 3/4" thread. Includes adapters and  plumber's  tape. Carded.
Plumb Pak 65AWK Roller Ball Bath Drain Assembly STOPPER LIFT/TURN PVD BRSH NIC SHOWER HH KIT 5FNC WHT 3.86IN
Roller ball style complete plastic bath drain. Chrome plated zinc exposed trim. Hand tighten slip joint installation, fits all standard size tubs. ?Includes all nuts and washers. PVD, Brass, 5/16 and 3/8" threads. Replaces foot operated stoppers including Rapid Fit 1200 series, Sterling, Casper's and Duracraft.
TUB DRAIN TRIP LEVER KIT W/CHR SPOUT TUB W/O DIVERTR BRSH NKL Oatey 42404 Shower Drain
Durable 1-1/2 in. plastic tubing, designed to fit standard-size tubs, includes all parts needed to replace an existing drain or add a new tub. Metal construction. Fits 1/2" IPS thread, 1/2" IPS thread in nose, 3/8". thread and 1/2" copper slip fit. Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes.
Oatey 140 Shower Stall Drain Plumb Pak PP826-1BN 2-Hole Trip Lever Style Tub Face Plate TRIM TUBDRAIN LIFT/TRN BRS NIC
Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced. Trip lever for drain control. Includes screws. Brushed nickel, brass construction, threaded adapter bushings fits 1-1/2 and 1-7/8" drain shoe. Includes overflow plate, bath drain strainer, washer, bushing, adapter for use with 1 or 2-hole overflow plate.
SHOWER HH KIT 3FNC CHM 3.15IN SHW HD RAIN CHM FL SPRY 4.75IN SHOWER HH KIT 5FNC CHM 3.80IN
Plumb Pak 614RB Tubular Bath Drain Waste Shoe With Strainer Whedon SRW1C Adjustable Shower Arm Extender Plumb Pak PP826-34DSBN Replacement Strainer Roller Ball Assembly
No.614RB - Fine thread for triple levers Nos.606 and 607, and triple lever-garden tub Nos.609 and 615. No.PP7091SN - For No.600, No.601, No.602 connected waste and overflow. Installs easily between any standard shower head and arm with standard 1/2" threads.  Adjusts shower height a total of 18", 9" swing shower arm swings up for tall people and down for kids and keeping hair dry Replacement assembly.
Danco 10316 Decorative Fit Bathtub Spout With Diverter SHOWER HH KIT 5FNC CHM 3.86IN SHOWER HEAD KIT 3W WHT 3.15IN
6" universal decorative tub spout.
Plumb Pak PP826-20DSPB Replacement Drain Foot Lock Assembly Plumb Pak PP826-66PC Foot Lok Trim Kit Plumb Pak Foot Lok Stop Bath Drain
Push button type with 5/16" thread shaft complete with cartridge and strainer. For 1-3/8" or 1-1/2" bath drain. Includes 1 hole face plate, strainer, conversion bushing and face plate converter. Complete plastic bath drain. Chrome plated exposed trim. Hand tighten slip joint installation, fits all standard size tubs. Includes all nuts and washers.
SHOWERHEAD FIXED-MOUNT CHROME Plumb Pak 64W Trip Lever Bath Drain Assembly ARM SHOWER ADJUST
ARM SHOWER ADJUST
Our Price: $26.99
3-1/2" diameter showerhead. Spray settings: Full body, full body pulse massage, PowerPulse Massage, PowerSpray, PowerSpray plus massage, water saving trickle. 2.0gpm, anti-clog nozzle. 1-1/2" O.D. tube size. Adjustable shower arm. 11" chrome plated
SHOWER HH KIT 5FNC CHM 5.14IN Plumb Pak 64B Trip Lever Bath Drain Plumb Pak PP825-19 S Shaped Shower Arm With Flange
Precision molded construction. 2" long brass face plate screws. 1-1/2" O.D. tubular plastic. 1-1/2" IPS threaded strainer. 4-1/4" overflow vertical adjustment. 2" waste shoe horizontal adjustment. 1/2" M.I.P. "S" shower arm with flange. Extends 8" from wall. Raises shower head 5-1/2".
Plumb Pak PP64W Trip Lever Bath Drain Plumb Pak Foot Lok Stop Bath Drain Assembly Plumb Pak PP825-36N Bathtub Spout With Front End Diverter
1-1/2" white plastic tubing. Polished chrome finish on exposed parts. Precision molded construction, 2" long brass face plate screws. 4-1/4" overflow vertical adjustment. 2" waste shoe horizontal adjustment. 1-1/2" O.D. tubular plastic. Front end mount for nipples extending 4-1/2"-5" from wall. Connects to 3/4" or 1/2" IPS pipe.
Plumb Pak Lift 'N Turn Bath Drain Assembly With Pipe and Tee Plumb Pak Foot Lok Stop Bath Drain Assembly SHOWER HH KIT 5FNC BNKL 3.80IN
Precision molded overflow includes pipe and tee. 2" long brass face plate screws. 1-1/2" schedule 40. Precision molded construction, 2" long brass face plate screws. 4-1/4" overflow vertical adjustment. 2" waste shoe horizontal adjustment. 1-1/2" O.D. tubular plastic.
Plumb Pak 640PVC Trip Lever Bath Drain Assembly With Pipe and Tee Plumb Pak 630PVC Foot Lok Stop Bath Drain Assembly With Pipe and Tee Danco 10528 Drain Stopper
Triplever Style Complete Sch. 40 PVC Bath Drain. 1 1/2" Sch. 40 pipe for solvent weld installation. Fits all standard size tubs. Includes all necessary hardware. 1-1/2" schedule 40 bath drain with pipe and tee. Chrome plated finish on exposed parts. Integral, ergonomic touch-activated stopper. Universal fit, fits any existing bathtub drain. Easy installation.
Plumb Pak PP7091SN Tubular Waste Shoe Assembly With Strainer Plumb Pak PP826-66VB Foot Lok Trim Kit SHOWERHEAD FXD-MNT BRUSHED NKL
No.614RB - Fine thread for triple levers Nos.606 and 607, and triple lever-garden tub Nos.609 and 615. No.PP7091SN - For No.600, No.601, No.602 connected waste and overflow. For 1-3/8" or 1-1/2" bath drain. Includes 1 hole face plate, strainer, conversion bushing and face plate converter. 3-1/2" diameter showerhead. Spray settings: Full body, full body pulse massage, PowerPulse Massage, PowerSpray, PowerSpray plus massage, water saving trickle. 2.0gpm, anti-clog nozzle.
SHOWERHEAD HAND-HELD CHROME   SHOWER HEAD RAIN CHRM         SHOWER HH KIT 5FNC BNKL 3.86IN
SHOWER HEAD RAIN CHRM
Our Price: $29.99
3-1/2" diameter showerhead. Spray settings: Full body, full body pulse massage, PowerPulse Massage, PowerSpray, PowerSpray plus massage, water saving trickle. 2.0gpm, anti-clog nozzle, 5' hose.
Danco 10534 Drain Stopper Plumb Pak PP826-81PC Roller Ball Trim Kit Moen 90530 Tub/Shower Drain Assembly With Lift-N-Drain
Integral, ergonomic touch-activated stopper. Universal fit, fits any existing bathtub drain. Easy installation. For 1-3/8" or 1-1/2" bath drain. Includes 1 hole face plate, strainer, conversion bushing and face plate converter. Tub drain, white plastic tubing with Lift-N-Drain assembly. For 14" and 16" tubs. White PVC tee, 1-1/2" threaded shoe. Boxed.
Plumb Pak PP826-81VB Roller Ball Trim Kit SHOWERHEAD HH BRUSHED NICKLE  SHOWR HD KT 3W 3FNC CHM 3.15IN
For 1-3/8" or 1-1/2" bath drain. Includes 1 hole face plate, strainer, conversion bushing and face plate converter. 3-1/2" diameter showerhead. Spray settings: Full body, full body pulse massage, PowerPulse Massage, PowerSpray, PowerSpray plus massage, water saving trickle. 2.0gpm, anti-clog nozzle, 5' hose.
Plumb Pak 630LAPVC Foot Lok Stop Bath Drain Assembly With Pipe and Tee Oatey 42070 Shower Drain SHOWER ARM ADJ 5FNC CHM 5.80IN
1-1/2" schedule 40 bath drain with pipe and tee. Chrome plated finish on exposed parts. Single hole face plate. 3/8" threaded shaft on foot lok stop assembly. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a rubber gasket and a fiber slip washer.  Three DWV connection methods provide a drain for all applications of metallic pipe.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes.
SHOWR HD KT 3W 5FNC CHM 3.86IN SHOWER ARM ADJST 1FNC CHM     SHOWER HD KT 3W 5FNC BN 3.86IN
SHOWER ARM ADJST 1FNC CHM
Our Price: $42.99
SHWER KT HH SLD BR 3FNC 3.15IN Plumb Pak 64WDS Trip Lever Bath Drain Assembly Plumb Pak Lift 'N Turn Bath Drain Assembly
Precision molded construction. 2" long brass face plate screws. 1-1/2" O.D. tubular plastic. 1-1/2" IPS threaded strainer. 4-1/4" overflow vertical adjustment. 2" waste shoe horizontal adjustment. Precision molded construction. 4-1/4" overflow vertical adjustment. 2" waste shoe horizontal adjustment. 2" long brass face plate screws.
Plumb Pak 606RB Trip Lever Bath Drain Assembly Plumb Pak 600SN Bath Drain Assembly With Chain and Rubber Stopper WASTE OVERFLOW W/FLEXIBLE PIPE
For built-in tubs. Professional Line. 20 Gauge. Precision molded construction. 2" long brass face plate screws. 1-1/2" O.D. tubular plastic. 4" overflow vertical adjustment. 1-1/2" IPS threaded strainer. 2" waste shoe horizontal adjustment. For exposed tubs. 1-3/8" O.D. 22 gauge brass tube. Cast brass elbows, tee, and nuts. Complete with chain and rubber stopper. Satin Polished Chrome finish strainer. Flexible tubing in place of the rigid PVC overflow pipe allows the overflow tubing to easily bend over from a misaligned drain pipe to the overflow hole of the tub1-1/2" -11-1/2 NPSM (coarae thread), 1.865" major diameter (outside gthread diameter, 11-1/2 coarse threads per inch.
Plumb Pak Foot Lok Stop Bath Drain Assembly
1-1/2" O.D. 20 gauge. Chrome plated finish on exposed parts.
   
 
1