Home > ELECTRICAL > LIGHTING & CEILING FANS > LAMP & FAN PARTS
Choose a sub category:
REPLACEMENT GLOBES SWAG LAMP KITS/HOOKS MISC LAMP PARTS
LAMP SOCKETS LAMP DIMMERS
Sort By:
1
Orrco 60170 Hex Nut Jandorf 60204 Flat Crossbar Jandorf 60230 Lamp Lock-Up Cap
Holds connecting parts in place. Crossbar for mounting light fixtures. Tapped 1/8" IP.
Jandorf 60162 Lamp Nipple Jandorf 60163 Lamp Nipple Jandorf 60144 Lamp Coupling
For repairing or making lighting fixtures and lamps. For repairing or making lighting fixtures and lamps. Decorative piece that connects nipples of different sizes together.
Jandorf 60231 Lamp Lock-Up Cap Jandorf 60145 Reducer Jandorf 60232 Lamp Lock-Up Cap
Tapped 1/8" IP. Connects nipples of different sizes. Tapped 1/8" IP.
Jandorf 60234 Lamp Lockup Kit Jandorf 60235 Lamp Lockup Kit Jandorf 60109 Tapped Top Hat Lamp Finial
Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white. Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white. Secures lamp shade to harp.
Jandorf 60203 Offset Crossbar Kit Leviton 004-03152-008 1-Circuit 1-Piece Keyless Lamp Holder Leviton 008-03152-00F 1-Circuit 1-Piece Keyless Lamp Holder
Crossbar for mounting light fixtures. Leviton Lamp Holder, 1-Circuit, 1-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, Bracket Mounting, Porcelain Body, Aluminum Shell, White, Unglazed, 1.38 in Overall Diameter, 1.52 in Overall Depth, UL E3810, CSA LR-1863, NOM 057 Leviton Lamp Holder, 1-Circuit, 1-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, Bracket Mounting, Porcelain Body, Aluminum Shell, White, Unglazed, 1.38 in Overall Diameter, 1.52 in Overall Depth, UL E3810, CSA LR-1863, NOM 057
Leviton 105-10028-000 Keyless Lamp Holder Arrow Hart 732-BOX Weatherproof Lampholder Jandorf 60141 Assorted Lamp Screw
Leviton Lamp Holder, Keyless, 75 W Lamp, 125 V, Incandescent Lamp, Candelabra Base, 2-Terminal Screw Terminal, Pony Cleat Mounting, Phenolic Body, Aluminum Shell, White, UL Listed, CSA Certified Insulation displacement terminals for standard wire. Lay-in wire channel, 1/4" turn twist top speeds installation. One piece terminals and contacts.  Wire range 18 to 12. Sockets are made of heat-resistant phenolic. Hook mounting. 660 watts. 250 volt. Meets all UL 496 requirements. Used for holding lamp parts in place. Contains 3 each 8/32" x 1/2" knurled head screws - brass plated, 8/32" x 1/2" knurled head screws - nickel plated, and 8/32" x 3/4" knurled head screws - brass plated, and two each of 8/32" x 1" slotted machine screws - brass plated and 8/32" x 2" slotted machine screws - brass plated.
Leviton 002-07080-00M 1-Circuit Lamp Holder Jandorf 60354 Chain Connector Jandorf 60358 Chain Connector
Leviton Lamp Holder, 1-Circuit, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, Phenolic Body, Aluminum Shell, Brass, UL E3810, Push-Through Access, For Interior Applications Links together two beaded chains. Links together two beaded chains.
Jandorf 94991 Beaded Chain With NO 6 Connector Jandorf 94992 Beaded Chain With NO 6 Connector Jandorf 94993 Beaded Chain With NO 6 Connector
With connector. With connector. With connector.
Jandorf 60146 Reducer Westinghouse 7077000 Swag Hook Kit Jandorf 60351 Chain Connector
Connects nipples of different sizes. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Links together two beaded chains.
Jandorf 60353 Chain Connector Jandorf 60355 Pull Chain Bell Jandorf 60370 Chain Connector
Links together two beaded chains. Decorative attachment for end of beaded chain. Links together two beaded chains.
Jandorf 60372 Chain Connector Jandorf 60374 Chain Connector Jandorf 60375 Pull Chain Bell
Links together two beaded chains. Links together two beaded chains. Decorative attachment for end of beaded chain.
Jandorf 60376 Chain Connector Jandorf 94995 Beaded Chain With NO 10 Connector Jandorf 60226 Candelabra Base Socket Cover
Links together two beaded chains. With connector. Covers base socket. For use with a maximum 25W bulb.
Jandorf 60227 Standard Base Socket Cover Jandorf 60148 Reducer Orrco 60142 Socket Key With 1/2 in Extension
Covers base socket. For use with a maximum 25W bulb. Connects nipples of different sizes. Turns lamp on and off. Socket keys and 1/2" extensions, 4/36F x 4/36M.
Jandorf 60233 Lamp Lock-Up Cap Jandorf 60160 Lamp Nipple Jandorf 60243 Lamp Loop
Tapped 1/8" IP. For repairing or making lighting fixtures and lamps. Decorative piece used for hanging fixtures. 1/8 IP brass finish.
Jandorf 60208 Flat Crossbar Leviton 001-00167-000 1-Circuit 2-Piece Keyless Lamp Holder Leviton 026-08052-001 1-Circuit 1-Piece Keyless Lamp Holder
Crossbar for mounting light fixtures. Leviton Lamp Holder, 1-Circuit, 2-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, Screw Terminal, Pin Mounting, 18 AWG Wire, Phenolic Body, Copper Alloy Shell, Black, Includes: Hook, UL Listed, CSA/NOM Certified Leviton Lamp Holder, 1-Circuit, 1-Piece, Keyless, Incandescent Lamp, Bracket Mounting, Porcelain Body, White, Unglazed
Westinghouse 7045200 Swag Hook Westinghouse 7045000 Swag Hook Kit Westinghouse 7045100 Swag Hook Kit
Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds.
Jandorf 60171 Lamp Nipple Jandorf 60173 Lamp Nipple Jandorf 60360 Pull Chain Bell
For repairing or making lighting fixtures and lamps. For repairing or making lighting fixtures and lamps. Decorative attachment for end of beaded chain.
Jandorf 60100 Spindle Finial Jandorf 60147 Reducer Jandorf 60149 Lamp Coupling
Secures lamp shade to harp. Connects nipples of different sizes. Decorative piece that connects nipples of different sizes together.
Orrco 60167 Hex Nut Jandorf 60250 Lamp Canopy Ball Jandorf 60237 Ceiling Hickey
Holds connecting parts in place. Secures canopy or blank up to crossbar. 8/32 thread, 3/8" diameter solid brass. Used for mounting drop fixtures.
Jandorf 60238 Ceiling Hickey Jandorf 60205 Offset Swivel Crossbar Leviton 002-00267-000 1-Circuit 2-Piece Keyless Lamp Holder
Used for mounting drop fixtures. Crossbar for mounting light fixtures. Leviton Lamp Holder, 1-Circuit, 2-Piece, Keyless, 75 W Lamp, 125 V, Incandescent Lamp, Candelabra Base, Screw Terminal, Pin Mounting, 14 - 12 AWG Wire, Phenolic Body, Copper Alloy Shell, Black, Includes: Hook, UL Listed, CSA/NOM Certified, Feed Through Access
Leviton 019-08101-000 1-Circuit 2-Piece Keyless Lamp Holder Cooper BP942 Push Thru Interior Lampholder Jandorf 60164 Lamp Nipple
Leviton Lamp Holder, 1-Circuit, 2-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, Ring Mounting, 18 AWG Wire, Porcelain Body, Aluminum Shell, White, Unglazed, 1-3/4 in Overall Diameter, 1.47 in Overall Depth, UL E3810, CSA LR-1863 Molded of heat and impact resistant urea. 660 watts, 250 volts. Fits catalog numbers 940, 941 and 485. Interiors UL component recognized. For repairing or making lighting fixtures and lamps.
Jandorf 60174 Lamp Nipple Orrco 60143 Socket Knob With 1/2 in Extension Jandorf 60150 Lamp Coupling
For repairing or making lighting fixtures and lamps. Turns lamp on and off. Includes 2 socket knobs - black, 2 - 1/2" extensions, 4/36F x 4/36M with brass finish. Decorative piece that connects nipples of different sizes together.
Jandorf 60151 Reducer Orrco 60169 Hex Nut Jandorf 60240 Ceiling Hickey
Connects nipples of different sizes. Holds connecting parts in place. Used for mounting drop fixtures.
Jandorf 60241 Ceiling Hickey Jandorf 60161 Lamp Nipple Orrco 60201 Ceiling Crossbar Kit
Used for mounting drop fixtures. For repairing or making lighting fixtures and lamps. Crossbar for mounting light fixtures.
Leviton 012-09350-000 1-Circuit 2-Piece Keyless Lamp Holder Leviton 003-00124-00D 1-Circuit Lamp Holder With 6 in Leads Leviton Electrolier 1-Circuit Lamp Holder
Leviton Lamp Holder, 1-Circuit, 2-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, Ring Mounting, Porcelain Body, Copper Alloy Shell, White, Unglazed, 1-3/4 in Overall Diameter, 1.39 in Overall Depth, UL E3810, CSA LR-1863 Leviton Lamp Holder, 1-Circuit, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 16 AWG Wire, Rubber/Phenolic, Black/White Leviton Lamp Holder, 1-Circuit, Series: Electrolier, 250 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Black, UL E3810, CSA LR-1863, Turn Knob Access
Leviton Electrolier 2-Circuit 3-Way Lamp Holder Leviton 918-03352-008 1-Circuit 1-Piece Keyless Lamp Holder Leviton 926-03352-004 1-Circuit 1-Piece Keyless Lamp Holder
Leviton Lamp Holder, 2-Circuit, 3-Way, Series: Electrolier, 250 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Thermoplastic Knob, UL E3810, Turn Knob Access Leviton Lamp Holder, 1-Circuit, 1-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, Bracket Mounting, Phenolic Body, Aluminum Shell, Black, 1-1/4 in Overall Diameter, 1.44 in Overall Depth, UL E3810, CSA LR-1863 Leviton Lamp Holder, 1-Circuit, 1-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, Bracket Mounting, Phenolic Body, Aluminum Shell, Black, 1-1/4 in Overall Diameter, 1.44 in Overall Depth, UL E3810, CSA LR-1863
Jandorf 60361 Beaded Chain With NO 6 Connector Jandorf 60110 Tapped Top Hat Lamp Finial Jandorf 60239 Ceiling Hickey
With connector. Secures lamp shade to harp. Used for mounting drop fixtures.
Jandorf 60209 Flat Crossbar With Nipple Jandorf 60172 Lamp Nipple Jandorf 60102 Tapped Pyramid Finial
Crossbar for mounting light fixtures. For repairing or making lighting fixtures and lamps. Secures lamp shade to harp.
Leviton 014-04155-051 1-Circuit 1-Piece Lamp Holder Jandorf 60470 Lamp Socket With 1-11/16 in Hickey Jandorf 60471 Lamp Socket With 3-13/16 in Double Leg Hickey
Leviton Lamp Holder, 1-Circuit, 1-Piece, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, In/Open Screw Terminal, Threaded Bracket With Locknuts Mounting, Phenolic Body, Steel Shell, Black, UL Listed, CSA Certified, Turn Knob Access, 1-1/4 in OD Molded of thermoset plastic. 75 watts, 125 volts. Molded of thermoset plastic. 75 watts, 125 volts.
Jandorf 60472 Lamp Socket With 2-15/16 in Double Leg Hickey Leviton 001-00055-000 1-Circuit Keyless Weatherproof Lamp Holder Leviton Electrolier 1-Circuit Lamp Holder
Molded of thermoset plastic. 75 watts, 125 volts. Leviton Lamp Holder, 1-Circuit, Keyless, Weatherproof, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, Screw Terminal, 14 AWG Wire, Vinyl, Black, UL Listed, CSA Certified Leviton Lamp Holder, 1-Circuit, Series: Electrolier, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Brass, Polished Gilt, 5-1/2 in Overall Length, 1-1/4 in Overall Width, 2-1/2 in Overall Depth, UL E3810, CSA LR-1863, NOM 057
Leviton Electrolier 1-Circuit Keyless Lamp Holder Cooper 2982-BOX Interior Lampholder Eagle 926-BOX 3-Way Turn Knob Lampholder
Leviton Lamp Holder, 1-Circuit, Keyless, Series: Electrolier, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Brass, Polished Gilt, 1.38 in Overall Diameter, 2.56 in Overall Depth, UL E3810, CSA LR-1863, NOM 057 Molded of heat and impact-resistant urea. 250 watts, 250 volts.  Aluminum, brass dipped finish. Fits catalog number 980. Interiors are UL component recognized. Medium base 250 watt 250 volt. Screw terminals are backed out ready for wiring. Interiors have removable turn knobs. 1/2" bracket height. 2-1/4" overall height. Temperature rating: -40 to 65 degrees C. UL Listed, CSA and NOM certified.
Cooper 3925-BOX Interior Lampholder Arrow Hart 968-BOX Keyless Fixture Socket Jandorf 60175 Lamp Nipple
Molded of heat and impact resistant urea. 250 watt, 250 volt. Interiors UL component recognized. Fits catalog number 925. Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 1 amp stems or brackets. 7/16" bracket height. 1-7/8" overall height. 660 watts, 250 volts. Meets all UL 496 requirements. For repairing or making lighting fixtures and lamps.
Jandorf 60356 Pull Chain Coupling Jandorf 60357 Pull Chain Coupling Jandorf 60359 Pull Chain Coupling
Used to secure beaded chain with a fastener. Used to secure beaded chain with a fastener. Used to secure beaded chain with a fastener.
Jandorf 60101 Spindle Finial Orrco 60168 Locknut Assortment Jandorf 60103 Tapped Pyramid Finial
Secures lamp shade to harp. Holds connecting parts in place. Contains two each 1/4-27 knurled locknuts, 1/8 IP knurled locknuts, 1/4 IP knurled locknuts, 8/32 battery nuts and four 1/8 IP hex nuts. Secures lamp shade to harp.
Jandorf 60242 Lamp Loop Leviton 008-18315-000 1-Piece Keyless Lamp Holder With 9 in Wire Leads Leviton 002-19062-000 1-Circuit 1-Piece Keyless Lamp Holder
Decorative piece used for hanging fixtures. 1/8 IP brass finish. Leviton Lamp Holder, 1-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, Angle Pan Mounting, 18 AWM Wire, Porcelain Body, Aluminum Shell, White, Unglazed, 1-1/2 in Overall Diameter, 1.44 in Overall Depth, UL Listed, CSA Certified Leviton Lamp Holder, 1-Circuit, 1-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, Pony Cleat, Surface Mounting, Phenolic Body, Aluminum Shell, White, Unglazed, 1-7/8 in Overall Diameter, 1-1/2 in Overall Depth, UL Listed, CSA Certified
Leviton C20-06098-0PG 1-Circuit Lamp Holder Leviton Electrolier 2-Circuit 3-Way Lamp Holder Leviton 922-03352-00F 1-Circuit 1-Piece Keyless Lamp Holder
Leviton Lamp Holder, 1-Circuit, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Brass, Polished Gilt, 5-1/2 in Overall Length, 1-1/4 in Overall Width, 2-1/2 in Overall Depth, UL E3810, CSA LR-1863, NOM 057, Push-Through Access Leviton Lamp Holder, 2-Circuit, 3-Way, Series: Electrolier, 250 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Brass, Polished Gilt, 1.38 in Overall Diameter, 2.56 in Overall Depth, UL E3810, CSA LR-1863, NOM 057, Turn Knob Access Leviton Lamp Holder, 1-Circuit, 1-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, Bracket Mounting, Phenolic Body, Aluminum Shell, Black, 1-1/4 in Overall Diameter, 1.44 in Overall Depth, UL E3810, CSA LR-1863
Cooper 975ABD-BOX Keyless Lampholder Arrow Hart 145-BOX Weatherproof Pigtail Lampholder Jandorf 60121 Detachable Lamp Harp
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. For use in electrical equipment, harnesses, light strings. Wire leads are 5", 14 gauge, color-coded and stranded wire, stripped 1". Rubber sockets have an extended lip to seal against bulb. Metal shell interiors are aluminum, nickel-plated copper. 660 watt. UL listed. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf 60106 Tapped Bullet Finial Jandorf 60120 Clip-On Lamp Shade Adapter Jandorf 60202 All Purpose Adjustable Crossbar Kit
Secures lamp shade to harp. Brass finish. Crossbar for mounting light fixtures.
Leviton 014-09347-0PG 1-Circuit Keyless Lamp Holder Leviton 014-19980-0PG 1-Circuit Lamp Holder Jandorf 60537 Snap-In Lamp Socket With L Hickey
Leviton Lamp Holder, 1-Circuit, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Brass, Polished Gilt, 1.38 in Overall Diameter, 2.56 in Overall Depth, UL E3810, CSA LR-1863, NOM 057 Leviton Lamp Holder, 1-Circuit, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Brass, Polished Gilt, UL Listed, CSA/NOM Certified, Pull Chain Access With 6", 18 awg wire leads. 660 watts, 250 volts.
Leviton 004-04155-000 1-Circuit 1-Piece Lamp Holder Leviton 003-19980-00M 1-Circuit Lamp Holder Leviton Electrolier 2-Circuit Lamp Holder
Leviton Lamp Holder, 1-Circuit, 1-Piece, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 3/8-27 Bushing Thread Mounting, Phenolic Body, Aluminum Shell, Black, 1.27 in Overall Diameter, 3.13 in Overall Depth, UL Listed, CSA Certified, Turn Knob Access Leviton Lamp Holder, 1-Circuit, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, Phenolic Body, Aluminum Shell, Black/Silver, UL Listed, Pull Chain Access Leviton Lamp Holder, 2-Circuit, Series: Electrolier, 250 W Lamp, 250 V, Incandescent Lamp, Medium Base, 3-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Thermoplastic Knob, Brass, Polished Gilt, 1.38 in Overall Diameter, 2.56 in Overall Depth, UL E3810, CSA LR-1863, Turn Knob Access
Leviton Electrolier 1-Circuit Lamp Holder Arrow Hart S752WSP Keyless Cleat Socket Jandorf 60107 Tapped Bullet Finial
Leviton Lamp Holder, 1-Circuit, Series: Electrolier, 250 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Thermoplastic Knob, Brass, Polished Gilt, UL E3810, CSA LR-1863, Turn Knob Access For use with stage lighting and similar applications. One piece with front wire screw terminals. 660 watt 250 volt. Meets all UL 496 requirements. Secures lamp shade to harp.
Jandorf 60474 Lamp Socket With Double Leg Hickey Leviton C20-09347-000 Keyless Lamp Holder Leviton Electrolier 1-Circuit Lamp Holder
Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire. Leviton Lamp Holder, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Aluminum Shell, Brass, 5-1/2 in Overall Length, 2-1/2 in Overall Width, 1-1/4 in Overall Depth, UL Listed, CSA/NOM Certified Leviton Lamp Holder, 1-Circuit, Series: Electrolier, 250 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Brass, Polished Gilt, UL E3810, CSA LR-1863, Turn Knob Access
Cooper BP940ABD Push Thru Metal Lampholder Westinghouse 7067000 Oval Fixture Chain 3 ft Jandorf 60122 Detachable Lamp Harp
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. Used to hang lighting fixtures, planters, shelving and wind chimes or as drapery tie backs. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer Jandorf 60140 Lamp Check Ring Jandorf 60540 Snap-In Single Spring Lamp Socket
Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1/8" M to 1/4-27 F reducer. Decorative highlight to cover opening. Contains 12 assorted check rings for 1/8" IP lamp nipples. With 6", 18 awg wire leads. 660 watts, 250 volts.
Jandorf 60543 Snap-In Single Spring Lamp Socket With 3/4 in Wire Leads Leviton 001-09880-000 1-Circuit 2-Piece Keyless Lamp Holder Leviton C20-07090-0PG 2-Circuit 3-Way Socket Lamp Holder
With 6", 18 awg wire leads. 660 watts, 250 volts. Leviton Lamp Holder, 1-Circuit, 2-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screws Terminal, Surface Mounting, Porcelain Body, Aluminum Shell, White, Glazed, 2.31 in Overall Diameter, 1.53 in Overall Length, UL E3810, CSA LR-1863, Back Wired Access Leviton Lamp Holder, 2-Circuit, 3-Way, Socket, 250 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Brass, Polished Gilt, 1.38 in Overall Diameter, 2.56 in Overall Depth, UL E3810, CSA LR-1863, NOM 057, Turn Knob Access
Jandorf 60123 Detachable Lamp Harp Jandorf 60124 Detachable Lamp Harp Jandorf 60538 Snap-In Lamp Socket
Protects bulb from lamp shade and holds lamp shade in place. Protects bulb from lamp shade and holds lamp shade in place. With 6", 18 awg wire leads. 660 watts, 250 volts.
Jandorf 60539 Lamp Socket Jandorf 60541 Double Spring Clip Snap-In Lamp Socket Leviton 002-10045-000 1-Circuit 1-Piece Keyless Lamp Holder
With 6", 18 awg wire leads. 660 watts, 250 volts. With 6", 18 awg wire leads. 660 watts, 250 volts. Leviton Lamp Holder, 1-Circuit, 1-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8-27 Cap Mounting, Phenolic Body, Copper Alloy Shell, White, Glazed, Nickel Plated, 1-1/2 in Overall Diameter, 2.063 in Overall Depth, UL Listed, CSA/NOM Certified, Back Wired Access
Cooper 1198-BOX Bottom Turn Knob Lampholder with Removable Knob Cooper 940ABD-BOX 3-Way Push Thru Socket Cooper 925ABD-BOX 3-Way Turn Knob Lampholder
Molded of thermoset plastic. Screw terminals are backed out. 1/8"-27 nipple. 11/16" bracket length, nickel finish.  660 watts, 250 volts. Meets all UL 496 requirements. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 3-Way sockets operate dual filament lamps on sequence of low, medium high and off. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Cooper 917ABD-BOX Turn Knob Lampholder Arrow Hart BP968 Keyless Fixture Socket Jandorf 60220 Ceiling Blank-Up Kit
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 1 amp stems or brackets. 7/16" bracket height. 1-7/8" overall height. 660 watts, 250 volts. Meets all UL 496 requirements. Decorative piece used to cover the outlet box after removal of an existing fixture.
Jandorf 60324 Beaded Chain With NO 6 Connector Jandorf 60352 Beaded Chain With NO 6 Connector Jandorf 60371 Beaded Chain With NO 6 Connector
With connector. With connector. With connector.
Jandorf 60373 Beaded Chain With NO 6 Connector Jandorf 60377 Beaded Chain With NO 6 Connector Jandorf 60125 Detachable Lamp Harp
With connector. With connector. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf 60136 Lamp Cord Jandorf 60211 Ceiling Canopy Kit Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer
With polarized plug. 18 gauge. Used to cover the outlet box and hang ceiling fixture. 5". Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1/8" M to 1/4-27 F reducer.
Jandorf 60112 Tapped Ball Finial Jandorf 60236 Screw Collar Loop Jandorf 60206 Loop Crossbar Kit
Secures lamp shade to harp. Decorative loop that secures 1 1/16" center hole canopy. 1/4 IP. Crossbar for mounting light fixtures.
Jandorf 60473 Lamp Socket With 1-7/32 in Ring Jandorf 60406 Keyless Lamp Socket Jandorf 60407 On/Off Push Through Lamp Socket
Molded of thermoset plastic. 75 watts, 125 volts. Fit standard lamp stems. Fit standard lamp stems.
Leviton 002-08880-000 1-Circuit 1-Piece Keyless Lamp Holder Leviton C20-19980-0PG 1-Circuit Lamp Holder Leviton R50-08875-000 1-Circuit 1-Piece Snap-In Lamp Holder
Leviton Lamp Holder, 1-Circuit, 1-Piece, Keyless, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, Clip Mounting, Phenolic Body, Copper Alloy Shell, White, Unglazed, 1.69 in Overall Diameter, UL E3810, CSA LR-1863, Back Wired Access Leviton Lamp Holder, 1-Circuit, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Phenolic Body, Aluminum Shell, Brass, Polished Gilt, UL Listed, CSA Certified, Pull Chain Access Leviton Lamp Holder, 1-Circuit, 1-Piece, Snap-In, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, Mounting Clip Mounting, Porcelain Body, Copper Alloy Shell, White, Unglazed, 1.41 in Overall Diameter, UL E3810, CSA LR-1863
Cooper BP925ABD Lampholder Arrow Hart 609-BOX Keyless Lampholder Jandorf 60475 Lamp Socket With Spring Clip
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 3-Way sockets operate dual filament lamps on sequence of low, medium high and off. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. High-strength insulator porcelain. Thermoset ring. 2 piece with 9" wire leads, medium base, keyless switch. Molded of thermoset plastic. 75 watts, 125 volts.
Cooper 980ABD-BOX 3-Way Pull Chain Socket Westinghouse 7040700 Keyless Socket Jandorf 60118 Lamp Shade Riser
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. Medium base. Threaded 1/8 hickey IP. 250 volts, 660 watts maximum. UL Listed. Raises lamp shade. 1/4-27 thread.
Jandorf 60530 On/Off Turn Knob Lamp Socket Jandorf 60535 On/Off Push Through Lamp Socket Jandorf 60563 Lamp Socket
Molded of thermoset plastic. Molded of thermoset plastic. Wire leads, 75 watts, 125 volts.
Cooper BP980ABD Push Thru Metal Lampholder Cooper BP145 Lampholder Cooper BP917ABD Lampholder
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. For use in electrical equipment, harnesses, light strings. Wire leads are 5", 14 gauge, color-coded and stranded wire, stripped 1". Rubber sockets have an extended lip to seal against bulb. Metal shell interiors are aluminum, nickel-plated copper. 660 watt. UL listed. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Arrow Hart 969-BOX Keyless Fixture Socket Jandorf 60165 Lamp Pipe Jandorf 60119 Lamp Shade Riser
Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 0.44" bracket height, 1.88" overall height. 660 watt, 250 volt. Temperature rating of -40 to 65 degrees C. Interiors have removable turn knobs. For repairing or making lighting fixtures and lamps. Raises lamp shade. 1/4-27 thread.
Jandorf 60400 Keyless Lamp Socket Jandorf 60401 On/Off Push Through Lamp Socket Jandorf 60408 On/Off Turn Knob Lamp Socket
Fit standard lamp stems. Fit standard lamp stems. Fit standard lamp stems.
Jandorf 60409 3-Way Turn Knob Lamp Socket Jandorf 60410 On/Off Pull Chain Lamp Socket Jandorf 60402 On/Off Turn Knob Lamp Socket
Fit standard lamp stems. Fit standard lamp stems. Fit standard lamp stems.
Cooper BP1198 Bottom Turn Knob Lampholder Jandorf 60127 Detachable Lamp Harp Jandorf 60134 Lamp Cord
Molded of thermoset plastic. Screw terminals are backed out. 1/8"-27 nipple. 11/16" bracket length, nickel finish.  660 watts, 250 volts. Meets all UL 496 requirements. Protects bulb from lamp shade and holds lamp shade in place. With polarized plug. 18 gauge.
Jandorf 60135 Lamp Cord Jandorf 60545 On/Off Turn Knob Lamp Socket Jandorf 60403 3-Way Turn Knob Lamp Socket
With polarized plug. 18 gauge. Molded of thermoset plastic. Fit standard lamp stems.
Jandorf 60128 Detachable Lamp Harp Jandorf 60133 Lamp Cord Jandorf 60138 Lamp Socket/Switch
Protects bulb from lamp shade and holds lamp shade in place. With polarized plug. 18 gauge. Lights up crafts and ceramic houses. 6' SPT-1 lamp cord, 18 gauge with on/off switch, candelabra base, clip-in socket and polarized plug. 75 watts maximum.
Jandorf 60212 Ceiling Canopy Kit Jandorf 60214 Ceiling Canopy Kit Jandorf 60215 Ceiling Canopy Kit
Used to cover the outlet box and hang ceiling fixture. 5". Used to cover the outlet box and hang ceiling fixture. 5". Used to cover the outlet box and hang ceiling fixture. 5".
Jandorf 60216 Ceiling Canopy Kit Jandorf 60218 Ceiling Blank-Up Kit Jandorf 60518 Lampholder Fixture Socket
Used to cover the outlet box and hang ceiling fixture. 5". Decorative piece used to cover the outlet box after removal of an existing fixture. Wire leads, 6" long.
Jandorf 60533 3-Way Turn Knob Lamp Socket Jandorf 60536 On/Off Bottom Turn Knob Lamp Socket Jandorf 60565 Lamp Socket With 6 in Wire Leads
Molded of thermoset plastic. Molded of thermoset plastic. Wire leads, 75 watts, 125 volts.
Jandorf 60576 2-Piece Ring Keyless Fixture Socket Jandorf 60582 3-Way Keyless Lamp Socket Jandorf 60229 Keyless Replacement Lamp Socket With 1/8 in IPT Hickey
Jandorf Fixture Socket, 2-Piece Ring Keyless, Series: 60576, 660 W Lamp, 250 V, Medium Base, Screw Terminal, Porcelain, White, Matte, UL Listed, For Signs, Fixtures and Decorative Lighting Jandorf Lamp Socket, Keyless, Series: 60582, 660 W Lamp, 250 V, Medium Base, Porcelain, Ivory, Matte, UL Listed, For Light Commercial and Residential Applications? Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire.
Jandorf 60404 On/Off Pull Chain Lamp Socket American Tack 6009B Incandescent Dimm Jandorf 60217 Ceiling Canopy Kit
Fit standard lamp stems. Converts any lamp to full range dimming. Range from night light to full brightness. Eliminates the need for expensive 3-way bulbs. Compact size fits most lighting fixtures. Screws in, no wiring required. Works with incandescent bulbs and many dimmable LED bulbs. Manual dimmer. 100 watts maximum. Plastic housing. 2.5" x 2.08" x 1.96". Used to cover the outlet box and hang ceiling fixture. 5".
Jandorf 60219 Ceiling Blank-Up Kit Jandorf 60534 On/Off Pull Chain Lamp Socket Jandorf 60575 2-Piece Ring Fixture Socket
Decorative piece used to cover the outlet box after removal of an existing fixture. Molded of thermoset plastic. Jandorf Fixture Socket, 2-Piece Ring, Series: 60575, 660 W Lamp, 250 V, Medium Base, Screw Terminal, Porcelain, Ivory, Matte, UL Listed, For Signs, Fixtures and Decorative Lighting
Jandorf 60577 Lamp Socket With 8 in Wire Leads Jandorf 60228 Keyless Lamp Socket With 1/8 in IPT Hickey Jandorf 60411 3-Way Pull Chain Lamp Socket
Jandorf Lamp Socket, Series: 60577, 660 W Lamp, 250 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire. Fit standard lamp stems.
Leviton Electrolier 2-Piece Lamp Holder With 6-1/4 in Pull Cord Jandorf 60213 Ceiling Canopy Kit Jandorf 60579 Lamp Socket With Side Outlet
Leviton Lamp Holder, 2-Piece, Series: Electrolier, 660 W Lamp, 250 V, Incandescent Lamp, Medium Base, 1/8 in IPS Threaded Bushing Terminal, Phenolic Body, Black, ISO 9001 Used to cover the outlet box and hang ceiling fixture. 5". Jandorf Lamp Socket, Series: 60579, 660 W Lamp, 600 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified
Jandorf 60580 Lamp Socket With Single Bushing Strap Jandorf 60223 Twin Cluster Ceiling Fixture Kit American Tack 6603BC Incand Dimmers
Jandorf Lamp Socket, Series: 60580, 660 W Lamp, 600 V, Medium Base, Porcelain, White, Matte, UL Listed Provides overhead lighting and supports reflector glass. Includes the canopy, two-bulb cluster socket with 18AWG pre-wired 8" insulated leads, rated 250 volts for use with 2 light bulbs, 50 watt maximum, 4" offset crossbar, two 8-32 x 1/2" mounting screws, two 1/8 IP rubber washers and a lock-up cap with brass finish. Lamp socket 3-Level dimmer. Converts any lamp with metal socket to a touch dimmer. Use regular bulb instead of 3-way bulb. Works with incandescent bulbs and many dimmable LED bulbs. 150 watts maximum. Plastic housing. 3.4" x 2.4" x 2.4".
AmerTac 6077B Full Range Replacement Dimmer Jandorf Make A Lamp Lamp Kit Jandorf 60221 Glass Shade Holder
AmerTac Replacement Dimmer, Full Range, 120 V, 1.6 A, 200 W, 3 Ways, Halogen/Incandescent Lamp, Wire-In Terminal, 2.55 in Overall Length, 2.15 in Overall Width, 2.14 in Overall Depth, Plastic, Black, Includes: Knob and Wire Nuts, For Indoor Applications Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple. Provides overhead lighting and supports glass shade. Includes: 1 glass shade holder with 18AWG pre-wired 6" insulated leads, ground wire and insulation - brass finish, 1 - 4" offset crossbar, 2 - 8-32 x 1/2" mounting screws, 2 - 8-32 x 2" mounting screws, 1 grounding screw and 3 knurled screws - brass finish. Rated 250V for use with 60W lamp maximum.
Jandorf 60222 Glass Shade Holder Jandorf 60517 Lampholder Fixture Socket Jandorf 60520 Lampholder Fixture Socket
Provides overhead lighting and supports glass shade. Includes: 1 glass shade holder with 18AWG pre-wired 6" insulated leads, ground wire and insulation - brass finish, 1 - 4" offset crossbar, 2 - 8-32 x 1/2" mounting screws, 2 - 8-32 x 2" mounting screws, 1 grounding screw and 3 knurled screws - brass finish. Rated 250V for use with 60W lamp maximum. Wire leads, 6" long. Wire leads, 6" long.
Jandorf 60405 3-Way Pull Chain Lamp Socket Leviton Electrolier 2-Circuit 3-Way Lamp Holder AmerTac 6079BC Dimmer Replacement Kit
Fit standard lamp stems. Leviton Lamp Holder, 2-Circuit, 3-Way, Series: Electrolier, 250 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Porcelain Body, Aluminum Shell, Brass, Unglazed, Polished Gilt, 1.38 in Overall Diameter, 2.56 in Overall Depth, UL Listed, CSA Certified, Pull Chain Access AmerTac Dimmer Replacement Kit, Universal, 500 W, 120 V, 5.6 in Length X 1 in Width X 1.3 in Depth, 3 Pieces, Includes: Wire Leads, Knob and Wire Nuts, Suitable For Use With: Torchiere Style Lamps, Plastic, UL Listed, For Indoor Applications
Jandorf 60132 SPT-1 Lamp Kit With Harp Jandorf 60578 Bottom Turn Knob Lamp Socket Cl Credenza Table Lamp Dimmer
Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple. Jandorf Lamp Socket, Bottom Turn Knob, Series: 60578, 250 W Lamp, 250 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified For use with table, floor, or hanging lamps. Slide-to-off feature uses slider to change intensity of light (up to brighten, down to dim) and lights turn off once slider reaches bottom. Requires no wiring, just plug-in. 120 volt, 60 Hz. UL Listed. 300 watt maximum incandescent or halogen.
American Tack 4010W Incand/Halogen Dimmer Jandorf 60532 3-Way Pull Chain Lamp Socket Leviton R12-TBL03-10W Tabletop Slide Control Lamp Dimmer
Converts any lamp to full range dimming. For incandescent, halogen and many dimmable LED bulbs. LED locator light. 6 foot power cord. Non-skid, non-mar base. 300 watts maximum, Plastic housing. 4.6" x 2.35" x 2" Molded of thermoset plastic. Leviton Control Lamp Dimmer, Tabletop Slide, 120 V, 300 W, 60 hz, Incandescent/CFL/LED Lamp, 32 - 130 deg F, White, UL94 V2 Listed, CSA Certified, 6 ft Cord, For Residential Applications
Westinghouse 7026800 3-Way Make-A-Lamp Socket Kit Leviton C20-06151-000 1 Pole Socket Dimmer Lamp Holder Lutron Credenza Lamp Dimmer
Brass plated 10" detachable harp, 18 gauge 8' UL Listed cord set, 3 way socket, finial and hardware. 150 watts maximum. Leviton Lamp Holder, 1 Pole, Electro-Mechanical, Socket Dimmer, 150 W Lamp, 120 V, Incandescent Lamp, Aluminum Shell, Brass, UL Listed, CSA/NOM Certified Lutron Lamp Dimmer, Series: Credenza, 120 V, 300 W, 1 Poles, 50/60 Hz, Incandescent/Halogen Lamp, Table Top, Plug-In Mounting, 0 - 40 deg C, 3.1 in Overall Length, 1-1/2 in Overall Width, Plastic, Brown, Gloss, Includes: Red LED Locator Light, UL, cUL Listed, For Bedroom, Dining Room, Foyer and Living Room
Lutron Credenza Lamp Dimmer Westinghouse 7080100 Lamp Dimmer American Tack 6004B Incandescent Dimmers
Lutron Lamp Dimmer, Series: Credenza, 120 V, 300 W, 1 Poles, 50/60 Hz, Incandescent/Halogen Lamp, Table Top, Plug-In Mounting, 0 - 40 deg C, 3.1 in Overall Length, 1-1/2 in Overall Width, Plastic, White, Gloss, Includes: Red LED Locator Light, UL, cUL Listed, For Bedroom, Dining Room, Foyer and Living Room For torchiere lamps. Knob included. 120 VAC. 500 watt maximum. Space saving design allows for surrounding outlets to be used. Converts any lamp with metal to a 3-level touch dimmer. Touch any metal part of the lamp including the harp to select light level. Use regular incandescent and LED bulbs instead of expensive 3-way bulbs. Works with incandescent bulbs and many dimmable LED bulbs. 200 watts maximum. Plastic housing. Plug-In connection, plug lamp into dimmer and dimmer into outlet. 1.73" x 2.6" x 1.36".
DIMMER CFL/LED LAMP SLIDE WHT Jandorf 60260 Swag Kit Jandorf Make A Lamp SPT-1 Lamp Kit With Harp
For use with table and floor lamps. Slide-to-off feature uses slider to change intensity of light (up to brighten, down to dim) and lights turn off once slider reaches bottom. Utilizes HED Technology, which features advanced dimming circuitry that is designed for compatibility with most dimmable CFL and LED bulbs. Single-pole lamp dimmer. 100 watt CFL/LED. Requires no wiring, just plug-in. 120 volt. Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple.
Jandorf 60262 Swag Kit Jandorf 60261 Swag Kit Westinghouse 0101100 Recessed Light Converter
Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Transform existing recessed lighting into a pendant or light fixture. Hang any pendant or light fixture of 50 pounds or less where you currently have recessed lighting. Adjusts to any fit can size between 4" and 6". No visible screws or hardware and the decorative medallion can be painted. Works with existing recessed cans that use medium base PAR16, R16, A19, R20, PAR20, BR25, BR30, R30, PAR30, BR38, PAR38, BR40 or R40 light bulbs and is suitable for damp locations. Includes adjustable bar, socket adapter, mounting bar, round metal plate, decorative medallion and hardware. Can be used on sloped ceilings up to 45 degrees.1.46" height x 6" diameter. ETL Listed.
Eagle 942-BOX Push Thru Interior Lampholder DIM TOUCH REPL 5/CC 300W H-W  DIM TCH REPL KIT 6/CC 150W H-W
Molded of heat and impact resistant urea. 660 watts, 250 volts. Fits catalog numbers 940, 941 and 485. Interiors UL component recognized. Universal design, will replace and repair any touch lamp dimmer. Installs in base of lamp. 3 light levels. 300 watts maximum. 120 volt, 60 Hz. Universal design, will replace and repair any touch lamp dimmer. Installs in base of lamp. 3 light levels. 300 watts maximum. 120 volt, 60 Hz.
Cooper 610-BOX Sign Receptacle DIMMER TCH PAD 200W 3-LEVEL
Two piece with screw terminals. High strength insulator porcelain. For use in signs, fixtures, decorative lighting and similar applications. 660 watts. 250 volt. Meets all UL 496 requirements. Plug light into the dimmer module and plug the dimmer module into an outlet. 8' cord. 1st touch, low, 2nd touch, medium, 3rd touch, high, 4th touch, off. 3-level dimming, Remote touch pad, Incandescent bulbs only, 200W maximum load. Includes 8' cord.
   
 
1