Home > PAINT & SUNDRIES > SUNDRIES > LADDERS
Choose a sub category:
STEP - ALUMINUM STEP - FIBERGLASS UTILITY/FOLDING STEP STOOLS
EXTENSION - ALUMINUM EXTENSION - FIBERGLASS PLATFORM LADDERS-ALUMINUM
PLATFORM LADDERS-FIBERGLASS COMBINATION/ MULTI LADDERS PLATFORM & SCAFFOLDING
LADDER ACCESSORIES
Sort By:
1
SPRING CLIP GREY 3IN          LOCK PIG TAIL                 Werner AC27-L Paint Cup Liner
SPRING CLIP GREY 3IN
Our Price: $2.39
LOCK PIG TAIL
Our Price: $2.99
Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold MetalTech coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in. For exterior scaffolding. Meets ANSI, CSA and OSHA standards.1-1/2 x 3 in Disposable liner for use with AC27-P paint cup SKU# 631.6558. Includes 4 liners.
Werner AC56 Lock-In Utility Hook LOCK ARM SCAFFOLD 13IN        Qualcraft 2501 Roofing Brackets
LOCK ARM SCAFFOLD 13IN
Our Price: $5.39
Use to keep cords from getting tangled in your ladder or organize cords and keep them within reach. Holds extension cords, air hoses, garden hoses, strands of lights, paint sprayers and other tools or project materials. Locks securely into ladder top or other Lock-In system accessories such as the Job Caddy (SKU# 304.3304), Utility Bucket (SKU# 304.3296), or Job Bucket (SKU# 241.1080). Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant. Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified.
Qualcraft 2502 Roofing Brackets Qualcraft 2500 Roofing Brackets Werner AC19 Extension Ladder Cover
Durable all steel construction. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks or 2" x 4" planks as specified. Durable all steel construction with 10" platform. 10" to fit pitch on most roofs. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 10" planks. Designed to snap over extension ladder rail end caps. Resists paints, stains, thinners and solvents. Flexible, fits all single and extension fiberglass and aluminum ladders (except 7500, D7500, 500 and D500) extension ladders, protects support surfaces from dents and scratches.
Werner AC27-P Lock-In Paint Cup Werner AC58 Ladder Tool Lasso With Belt Clip Qualcraft 2504 Roofing Brackets
For trim painting and cut-in applications. Built-in magnet to secure a paint brush. Can be used with disposable paint cup liner AC27-L SKU# 631.6590. For use on ladders that include Lock-In System sockets such as the Job Caddy (SKU# 304.3304), Utility Bucket (SKU# 304.3296), or Job Bucket (SKU# 241.1080). Compatible with OBEL00 series, OBPT00 series, OBCN00 series, 6200 series, 6100 series, 6000 series, PS-48 model, and AC24 model. Secures tools from falling to protect your investments, puts tools in easy reach. Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified.
Qualcraft 2503 Roofing Brackets STEP STOOL FOLDING            GUARDRAIL 5FT
GUARDRAIL 5FT
Our Price: $11.99
Durable all steel construction with 6" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks. Great step up for in the kitchen, bathroom, etc. Meets ANSI, CSA and OSHA standards.
Rubbermaid FG420087WHT Roughneck Step Stools Rubbermaid FG420087BISQUE Roughneck Step Stools Mintcraft Pro YH-CS001 Casters
Will not dent or rust. Bottom pads help prevent stool from slipping, protect floors. Holds up to 300 pounds. Size: 12-1/2" x 15-1/2" x 9- 1/4" high. Will not dent or rust. Bottom pads help prevent stool from slipping, protect floors. Holds up to 300 pounds. Size: 12-1/2" x 15-1/2" x 9- 1/4" high. For Sku# 879.5478 scaffold. 5" Dia. x 1-1/4" W. Rubber wheel. Pin not included. 303 lb. load capacity.
Staples 611F Tear Resistant Weather Resistant Ladder Mitt Werner PK76-3 Auto Closing Pail Shelf Werner PK76 2-Piece Pail Shelf
Fits any standard size ladder to prevent damage to support surfaces. Tough urethane resists tearing and weathering. Made in the USA. Rugged construction. Spill-Proof. Easy to keep clean. Automatically closes with stepladder. Built-in rag rack. Fits fiberglass stepladders and aluminum 400 Series stepladders. Black color. Universal auto closing pail shelf, mounting hardware and instructions included. Rugged construction. Spill-Proof. Built-in rag rack. Two piece yellow molded plastic pail shelf with aluminum arms. Works with Werner fiberglass stepladders and aluminum 400 Series ladders. Universal pail shelf, mounting hardware and instructions included.
Cosco 11-905-PBL4 Safety 1St Folding Step Stools Werner AC50-JB-3 Lock-In Job Bucket JACK ADJ LEVELLING GALV 24IN
Lightweight, all-plastic design. Legs lock into position; "locked" indicator is visible on top. Folds to 3-3/8" for compact storage. Top side walls help prevent accidental slipping. Convenient handle for carrying ease. Weight capacity - 200 pounds. Dimensions: Open - 10"H x 16.25"W x 11.25"D. Folded - 3.38"H x 20.13"W x 11.25"D. Compatible with OBEL00, OBPT00, OBCN00 and 6200 series. Increase the work space on your ladder, sturdy lug and socket feature for seamless installation. With plate (hollow). Meets ANSI, CSA and OSHA.
GUARDRAIL POST W/WEDGE CLAMP  Cosco 11135CLGG4 Folding Step Stools Werner AC96 Extension Ladder Stabilizer
Meets ANSI, CSA and OSHA standards. Two metal steps for strength, non-marring, skid resistant front leg tips. Opti-Bond powder finish, ribbed, slip resistant step treads. Convenient handle for carrying ease, continuous rear leg support for added strength. Meets ANSI Standards for Type III Light Duty Household Rating. Rectangular. For aluminum ladders of all duty ratings and fiberglass ladders with side rails up to 3"H x 1-3/16"W. Also fits Articulated ladder in scaffold or stairway use. Mar-resistant rubber caps protect work surface. Fits aluminum series extension ladders with rails up to 3-5/16" x 1-3/16", D716, D1100, D1200, D1300, D1500, D500 (20' to 24'), M and M1 Multi-Master ladders. Includes paint can hook, mounting hardware and instructions.
Homebasix WK-2062A Folding Step Stools QualCraft 2481 Weather Resistant Ladder Hook With Wheel BRACE SCAFFOLD CROSS 7X4FTX1IN
Gray powder coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. Lightweight and easy to carry. Highest standing: 18-1/2"; Step size: 15 L x 10-1/4"W; Open Size: 38-1/2"H x 19-1/4"W  x 20"D; Closed Size: 42-1/2" H x 19-1/4" W x 3" D. Fits single or extension ladders in wood, fiberglass, and aluminum in round and "D" rung styles. Constructed of steel for strength, durability and safety. Adjustable to fit between top two ladder rungs. Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in. O.D. galvanized steel tube, 16 ga. Weather Resistant. ANSI Specified. CSA Certified. OSHA Approved.
TRAY BAKER TOOL               Cosco 11565CGGL4 Big Step Folding Step Stools QualCraft 2201 Pump Jack Brace
TRAY BAKER TOOL
Our Price: $28.99
For use with I-CISC, I-CISCTP, I-CISCPY, I-CAISC and I-IRC scaffolds. Black polypropylene. 30.25 x 20 x 2.75 in. Large heavy-duty injection molded polypropylene resin steps, ribbed slip resistant leg tips, continuous rear leg tips and glides, compact flat,  ANSI Type 3 Household Duty. Used as bracing for wood poles. Pole should be constructed in accordance with operating instructions.
STABILIZER LADDER             Werner AC52-UB Lock-In Utility Bucket BRACKET SIDE 20IN
STABILIZER LADDER
Our Price: $29.99
BRACKET SIDE 20IN
Our Price: $35.99
Fits extension and single ladders with rail up to 4? x 13/4?. Holds ladder 12? from wall and spans 48? to clear most windows. Stabilizers attach with 2 U-bolts and feature replaceable extra heavy duty rubber tips. Approx. Weight: 6 lbs. Expands work surface and customizes ladder tops. For on the jobsite or household use. Locks securely into the ladder top. Can be used for wet or dry applications. Holds up to 1 gallon of liquid and has a 25 lb capacity. Integrated Lock-in System socket on the bucket allows for additions such as Paint Cup (SKU# 631.6558), ToolLasso (SKU# 304.3288) or Utility Hook (SKU# 304.3312). Meets ANSI, CSA and OSHA standards.
Cosco 11628ABK4 Lite Solutions Step Stools Qualcraft 2210 Pump Jack Pole Anchor Louisville AS3000 Step Ladder
Large, heavy-duty injection molded polypropylene resin top step. Ribbed, slip-resistant step treads. Self-locking fold. Non-marring, skid-resistant leg tips and glides. Folds flat by lifting handle. Weighs 5 lbs. Provides additional margin of safety and security when used according to instructions with light duty scaffolding system. Slip resistant. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Large structural molded top. Large parts tray recessed 1/4" deep with tool slots. Heavy-duty side rails are full channel extrusions on the front and modified channel on back legs. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" Wide.
Rubbermaid FG420903WHITE Ez Step Step Stools QuickClick AC78 Ladder Stabilizer Werner 150B Step Ladder
Lightweight, resistant to rust and dents, easy to clean. Stands upright when folded. 25" x19" x 6-1/2". For painting and home repair projects. Spring-loaded locking latch for quick installation and removal. Quick release attach pins connect stabilizer arms to body without tools. Non-marring rubber end caps protect work surface. For use on singles and extensions with 1-1/4" round rungs, 1-1/2" and 1-3/4" flat rungs. No tools required for assembly. 10" standoff from work surface. Black molded plastic top provides large 6" wide x 12-3/8" long standing platform. Traction-Tred slip resistant full-sized steps. Pinch-Proof spreaders. Bottom step has double braces. Blue molded vinyl foot pads rivets to side rails. U.L. Listed. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3" Wide; Rear Rails 1-1/8"  Wide; Top 6" x 12-3/8"; Steps 3" wide.
Werner AC54 Lock-In Job Caddy Louisville AS4004 Step Ladder Louisville AS2100 Step Ladder
Expands work surface and customizes ladder top. Holds large or odd shaped items like fluorescent bulbs or ceiling fan blades. Includes 4 storage compartments to keep small parts separated. Holders for screwdrivers, pliers, putty knives and towels. End hook is built-in for convenience. Integrated Lock-in System socket on the buck allows for additions such as Paint Cup (SKU# 631.6558), ToolLasso (SKU# 304.3288) or Utility Hook (SKU# 304.3312). Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner 354 Single Sided Step Ladder With Pail Shelf Werner AP Portable Type II Work Platform Werner 5906 Single Sided Step Ladder
For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards. Non-marring feet provide slip-resistance and protect floor from damage. Provides a non-skid area for standing. Lightweight, easy to carry and set up. Convenient to store. Work comfortably along walls and windows. Ideal for painting. Dimensions: 39-1/2" x 12" top; 20-9/16" highest standing level. 41"H x 16-5/8"W x 35-3/4"D. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps.
Louisville FS4006 Commercial Step Ladder Louisville AS4005 Step Ladder North American 53502 Work Platforms
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. For painting. Features: safety locking legs and non-skid feet; slip resistant standing surface; lightweight and easy to carry, set up, fold and store; works comfortably along walls and windows. 20" standing height. 39" x 12" surface area.
OUTRIGGER EXT 32IN            Werner 356 Single Sided Step Ladder With Pail Shelf Homebasix WK-2063A Folding Step Stools
OUTRIGGER EXT 32IN
Our Price: $52.99
Use to provide additional stability for higher elevations. High performance steel and heavy duty welds for a solid and secure footing. Use with any standard or arched scaffold frames. Blue anti-slip baked on powder coated textured finish for maximum corrosion resistance. Meets OSHA requirements. For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards. Hammertone coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. Lightweight and easy to carry. Highest standing: 27-1/2". Step size: 15" L X 10" W; Open size: 50-3/4"(H) x 19-1/4"(W) x 25"(D); Closed size: 55-1/4"(H) x 19-1/4"(W) x 3"(D).
Louisville AP8000 Stepstool Werner 5904 Single Sided Step Ladder Louisville FS2004 Commercial Step Ladder
Includes slip-resistant platform, heavy-duty gusset bracing, top rail guard, double-rivet step construction, and slip-resistant rubber feet. Trapezoid shape platform: 14" width base, 1" top and 1" depth. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Louisville FS4004 Commercial Step Ladder Werner 363 Single Sided Step Ladder With Pail Shelf FRAME SCAFFOLD 60X60IN
FRAME SCAFFOLD 60X60IN
Our Price: $57.99
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps. Powder coated. Flip locking system. Includes coupling pins and spring-locks. Gravity-lock frame lock. 48in lock spacing. Interior tubes: outside diameter 1 in. - 16 gauge. Perimeter tubes: outside diameter 1.625 in. - 13 gauge. Meets ANSI and OSHA Standards.
Mintcraft Pro YH-TR001-2 Outrigger Werner 355 Single Sided Step Ladder With Pail Shelf Werner 240 Step Ladder
Yellow powder coated finish. Steel material. Casters not included. Dimensions: 18" H x 15-5/8" W. For use with SKU# 879.5478. For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards. Easy action open-close. Non-slip steps. Non-marring rubber tip feet. Folds to 3" for easy storage. Wide angle stance. Ideal for close-up work. UL listed. Meets ANSI Code. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Steps 6" wide; Height to 2nd step 23".
Werner 6000 Step Ladder Louisville AS4006 Step Ladder QualCraft 2420 2-Rung Short Body Ladder Jack
Molded top provides large standing platform. Slip-resistant traction-tred steps. Plated steel braces on bottom steps. Combinations rail end shield and foot with slip-resistant foot pad. External pinch-proof spreaders. Dimensions: 5-5/8" x 12-3/8" top; 3" steps; 3-1/8" wide front rails; 1-1/8" wide front flange; 1-3/4" wide rear rails; 1-3/16" wide and 5/8" wide in front. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. MIG welded and riveted construction. Will work on either inside or outside ladder face. Will accommodate up to 18" wide-plank. Adjustable to fit round or D-Rung ladders. Complies with OSHA requirements.
Werner 360 Single Sided Step Ladder With Pail Shelf Werner 366 Single Sided Step Ladder With Pail Shelf Louisville AY8000 Extra Step Stand
Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps. Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps. Large structural molded top measures 14" wide by 9-1/4" deep. Diamond tread for a slip-resistant platform. Each step secured with six, large headed, semi-tubular steel rivets. Heavy duty steel gussets to support bottom step. Steps are 6" wide. Meets or exceeds the safety standards set by ANSI and OSHA.
Werner 6004 Single Sided Step Ladder Louisville AS2100 Step Ladder PLATFORM WORK TYPEII 225LB
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Slip-resistant surface. Easy-use locking hinge. Slip-resistant rubber feet. Height to platform 20?. Work Area: 11-7/8? x 37?. Bottom Width: 15-1/2?. Approx. Spread:  52-1/2?. Approx. Weight (lbs) 10. Approx. Cubes 1.7?.
Qualcraft 2200 Pump Jacks Louisville FS2006 Commercial Step Ladder Werner 6005 Single Sided Step Ladder
Steel construction. Adjustable to any height up to 30'. Your weight does the work. Raise or lower men and equipment. Held secure to wood poles with a Positive Double Lock System. Raise to position with foot pump and lower with crank. Must be used in strict compliance with Federal OSHA regulations. New York State Approval No. 4781. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
Qualcraft 2204 Pump Jack Workbench Louisville FS1504 Extra Step Ladder Werner 260 Platform Ladder
Qualcraft Workbench/Guardrail Holder, For Wood Staging Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide.
Louisville FS2005 Commercial Step Ladder SAWHORSE TYPE IA 2FT          Werner 374 Single Sided Step Ladder With Pail Shelf
SAWHORSE TYPE IA 2FT
Our Price: $77.99
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. This ladder combines two essential tools to create a lightweight wide surface and a support tool for sawing and other tasks. Equipped with angled aluminum slip-resistant rubber feet, heavy gauge steel hinges, heavy duty gusset bracing, and double-rivet step construction. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide.
Werner 6006 Single Sided Step Ladder Homebasix WK-2064A Folding Step Stools DeWalt DXL3010-04 Step Ladder
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Hammertone powder coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. With plastic tray. Lightweight and easy to carry. Highest standing: 28"; Step size: 15"L x 10-1/4" W; Tray size: 14-" L x 10-" W x 1-3/8"D; Open size: 50-3/4 H x 19-1/4" W x 24" D).  Closed size: 67-1/2"(H) x 22"(W) x 5-3/4"(D). Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area.
Louisville AS2100 Step Ladder Werner 368 Single Sided Step Ladder With Pail Shelf Louisville FS1506 Extra Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner 6200 Single Sided Step Ladder Louisville AS4008 Step Ladder Louisville L-2321 Extension Ladder
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. Mar-resistant impact caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. D-shaped rungs. Fixed runglock. Slip-resistant feet. Dimensions: Side Rails 2.5" wide; .75" Rail Flange; 1.23" Rung; Base outside width 16"; Fly outside width 16". Meets or exceeds the safety standards set by ANSI and OSHA.
LADDER IA FBRGLS CRSS-STEP 4FT DeWalt DXL3110-06 Step Ladder Werner D716-2 Multi-Section Extension Ladder
Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam side rails. Fixed aluminum lock allows push up height adjustment. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meet ANSI Code. Dimensions: Side rails 2-1/2" wide; Flange 3/4" wide; Rungs 1-1/4" wide; Base width 15-3/4" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Louisville L-2324 Extension Ladder Louisville FS1505 Extra Step Ladder Werner 6200 Single Sided Step Ladder
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
Werner 376 Single Sided Step Ladder With Pail Shelf Werner 5908 Single Sided Step Ladder Werner D1116-2 Multi-Section Extension Ladder
Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide; Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner 260 Platform Ladder Louisville FS4008 Commercial Step Ladder Werner 6206 Single Sided Step Ladder
Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
CASTER SCAFFOLDING 500LB 8IN  OUTRIGGERS SET W/CSTR 4-5IN   SAWHORSE TYPE IA 3FT
SAWHORSE TYPE IA 3FT
Our Price: $99.99
8 in wheel enables to easily move scaffolding and locks into place for stability and reliability. Secure and safe, use with standard or arch frame. Caster wheels have a 3.88 in Height stem, they do not clamp. Use with locking pin. Specifications: 19.25 x 4.5 x 24 in. assembled, weighs 33 lb, 5 in. double locking heavy duty casters. Includes 4 outriggers, 4 casters and 12 locking pins. Compatible with I-CISC, I-CISCTP and I-CAISC. Meets ANSI, CSA and OSHA standards. This ladder combines two essential tools to create a lightweight wide surface and a support tool for sawing and other tasks. Equipped with angled aluminum slip-resistant rubber feet, heavy gauge steel hinges, heavy duty gusset bracing, and double-rivet step construction. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
LADDER JACK SHORT-BDY ALU     Cosco 11003ABL2 World's Geatest Aluminum Stepladders Werner TW373-30 Work Step Ladder
LADDER JACK SHORT-BDY ALU
Our Price: $99.99
Span 2 extension ladder rungs. Holds planks and stages up to 20? wide, features six pitch adjustments and folds for easy storage. Manufactured for use with type IAA, IA, and I fiberglass and aluminum extension ladders. Approx. Weight: 14 lbs. Lightweight aluminum frame, three large heavy duty injection molded polypropylene resin steps. Extra-large 16-1/4 x 16-1/4 top platform step. Extended hand with security lock. Easy one hand fold. Large non-marring, skid resistant, stabilizing feet protect floor surfaces. Deluxe, molded utility tray features: Recessed areas for paint cans, tools, drill holder etc. Two locking drawers for small parts, Meets ANSI Standards. 61.42" H x 22.05" W x 19.88" D open and 69.45" H x 22.05" W x 7.28" D folded . External pinch-proof spreaders for easy opening and closing. Double angle bracing on all steps. Mar-resistant feet for slip-resistance on concrete, wood and vinyl floors. Double top steps provide wide platform. Slip-resistant Traction-Tred Steps on front and rear section. Extra wide for versatile use as work stand, stage or material support. Lightweight and portable. Heavy steel hinges. Dimensions: top 8" x 30", 3" wide rails, 3" wide steps and 7/8" wide flange.
DeWalt DXL3110-08 Step Ladder DeWalt DXL3010-06 Step Ladder Louisville LeveLok Swivel Ladder Leveler
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Extends up to 10" for steps. Attaches to either side or on multiple ladders. Large heavy duty swivel shoe with spurs. With patented KeyLok Quick Connect system. Fits FE1700, FE3200 (16'-32 and 36' - 40'), FE7600, FE4200HD, L-3022-PT, AE3200, AE2200, AE2800, AE1200HD, AE1200, and L-2094. Includes 1 quick connect leveler and 1 set (2) quick connect base units.
Louisville FS2008 Commercial Step Ladder Werner 6200 Single Sided Step Ladder Vulcan YH-SD401/YTL40102 Scaffold
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Steel construction with rust resistant powder coated finish. 250 lb. step capacity with slip resistant surface. 4" locking casters. Includes 2 attachable tool bags. 18" W x 21-1/2" D x 58-1/25"H.
Xtend+Climb Home Telescoping Ladder LADDER IA FBRGLS CRSS-STEP 6FT LADDER JACK LONG-BDY ALU
LADDER JACK LONG-BDY ALU
Our Price: $119.99
Stands at 8.5 ft and retracts down to 27 inches. Features patented True Telescoping Technology. Aerospace engineered using airplane grade alumium alloy for strength. Double overmolded feet for durability and traction. Angled thumb release to ensure proper hand position. Integrated carrying handle for easy transportation. Clean touch anodized finish. Dimensions: Height Extended: 8.5', Height Closed: 27", 18" W x 3.75" D. 16.5 pounds. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Span 3 extension ladder rungs. Holds planks and stages up to 20? wide, features six pitch adjustments and folds for easy storage. Manufactured for use with type IAA, IA, and I fiberglass and aluminum extension ladders. Approx. Weight: 16 lbs.
Werner AC10 2-Rung Long Body Ladder Jack Werner 7306 Single Sided Step Ladder Werner D1120-2 Multi-Section Extension Ladder
Long body style attaches to two rungs. Supports 12", 14" and 20" wide stages or planks. Extruded heavy gauge aluminum Tool-Tra-Top. Traction-Tred deeply serrated aluminum steps, double riveted. Heavy duty 1" inside plated steel spreader bars. Optional black pail shelf kit: Model No. 76-3. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Massive 3/16" thick side plates. Four solid 1/4" aluminum rivets attach top to front rail. 5/16" shoulder bolt and lock nut on top hinge. Every rivet backed up by metal part or washer to protect fiberglass. U-channel double braces on bottom step. Yellow fiberglass side rails with non- irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front rails 3-1/8" wide; Front flange 1-3/16" wide; Top 7-1/4"W x 14-7/8"L; steps 3" wide; Rear rails 1-7/8" wide; Rear flange 1-3/16. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Louisville FS1508 Extra Step Ladder Werner PS-48 Portable Rolling Scaffold Louisville L-2324 Extension Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Planks are adjustable making multiple working heights. Also use as a workbench, storage, and hauling heavy materials. High grade wheels prevent marring by locking securely into place. Lightweight. Platform Dimensions: 46-1/8" x 8-1/2" per plank (two planks per unit), 41-1/2" x 17" total standing area (both planks combined), 30-1/8" highest standing level. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley.
Werner Level-Master PK80 Ladder Leveler With Safety Shoes M-MPP719 PLATFORM 7FT X 19IN  SAWHORSE TYPE IA 4FT
SAWHORSE TYPE IA 4FT
Our Price: $129.99
Steel swivel shoes. Easily locks and levels. Up to 8-1/2" of adjustment. Heavy duty construction. Attaches to ladders side rails with locking nuts and bolts. Width of ladder and leveler is 3-1/4" wider than ladder. Fits aluminum series No. D1100, No. D1200, No. D1300, No. D1500, and No. D500. Fiberglass series No. D5900, No. D6000-2, No. D6200-2, No. 7100, No. D7100, and D7500. Two Level-Master Ladder Levelers (one for each side of ladder), mounting hardware and instructions included. U.L. Listed and Labeled. Meets OSHA Standards. Includes sliding locks for securing. 5/8? plywood. Meets ANSI, CSA and OSHA standards. This ladder combines two essential tools to create a lightweight wide surface and a support tool for sawing and other tasks. Equipped with angled aluminum slip-resistant rubber feet, heavy gauge steel hinges, heavy duty gusset bracing, and double-rivet step construction. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
Aluma-Plank 5300 Twist Proof Work Platform Louisville PD9000 Scaffold Platform Werner Old Blue Single Sided Step Ladder
For use with steel scaffolds. Heavy-duty 1/2" exterior grade plywood. Fastened with special oversized rivets. Dimensions: Side Rail Length 7'; Side Rail Depth 3-1/2". Includes safety latch. Solid bolt construction. 2" rail size. Customized HolsterTop with lock-in accessory system secures tools from falling. Integrated ToolLasso system secures tools from falling. Multi-Use hook for hanging tools and buckets. Rugged professional grade bracing. 3 ToolLasso included. Includes a tape measure holder, 2 ToolLasso sockets, 2 screwdriver slots, MagnaGrip magnetic tool holder and a drill or hammer holder. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide.
Werner FTP6206 Tripod Ladder LADDER PRO PLATFORM FG 3 FT   GUARDRAIL ST F/BKR STYL SCFLD
Use to work in tight corners and between studs. Tool-Tra-Top with drill holster/paint can holder. Double riveted comfortable Traction-Tred steps for slip resistance and durability. Spreader-handle for one-hand setup and transportability. Wear resistant aluminum outrigger to protect the rail connections. Molded external rail shield helps protect against abrasion and rail damage. Fully braced front section. Extra clear-width for comfortable climbing. Replaceable riveted, slip-resistant rear footpad. Dimensions: 5-3/4" x 13" top, 3-1/8" side front rails, 1-1/2" square (4' to 8') rear rail, and 1-3/16" flange. Features an extended handrail, multifunctional ProTop with multiple tool slots and magnet, and platform. SHOX with impact absorption. DA BOOT slip resistant boot. Extended handrail for added comfort and safety. Double-rivet step construction. Wide back braces. Platform dimensions: 17-5/8? x 14-1/2? x 14-1/2?. Assembled size: 69.75 x 29.25 x 44.5 in. Weighs 59 Lb. 1in 16 gauge structure. Includes 2 guardrails with gates and 4 toggle pins. Compatible with I-BMSS, I-CISC, I-CISCTP AND I-CAISC. Meets ANSI, OSHA, and CSA standards.
Werner 6208 Single Sided Step Ladder DeWalt DXL3010-08 Step Ladder Louisville FM1500 Twin Step Ladder
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Non-conductive. DA BOOT, a polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Heavy gauge steel hinges. Reinforced bottom step. Inside spreader braces. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: 12-3/4" x 9" top, 3" x 1-1/2" steps, 3-1/8" x 1-1/8" rails and flange 3-1/8" x 1-1/8".
Werner 378 Single Sided Step Ladder With Pail Shelf Werner T6006 Twin Ladder Louisville AE4216PG 2-Section Extension Ladder
Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide. Back-up aluminum plates reinforce all top connectors. Braces on top and bottom steps. Combination rail end shield and foot with slip-resistant foot pad. Rubber step bumpers to resist damage. Slip-resistant traction-tred steps on front and rear sections. External Pinch-Proof spreaders. Tool-Tra-Top with dual drill holster, tool and small parts tray. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/2" x 13"; Steps 3" wide; Rails 3-1/8" wide; Flange 1-1/8" wide. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
Qualcraft 2601 Wall Jacks LADDER PRO PLATFORM FG 4 FT   Werner PD6203 Podium Ladder
Easy to use and economical. Constructed of heavy duty malleable iron castings. Designed for use with 1-1/2" x 3-1/2" (2 x 4) fir poles. Used to raise walls and beams, to construct decks, or to tighten and true flooring. Capacity: 1,000 pounds. When used in conjunction with poles made of clear straight grained fir wood, free from all knots or defects. Features an extended handrail, multifunctional ProTop with multiple tool slots and magnet, and platform. SHOX with impact absorption. DA BOOT slip resistant boot. Extended handrail for added comfort and safety. Double-rivet step construction. Wide back braces. Platform dimensions: 17-5/8? x 14-1/2? x 14-1/2?. Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced
Xtend+Climb 760P Telescoping Extension Ladder LADDER IA FBRGLS CRSS-STEP 8FT SCAFFOLD W/4FT WHL SHLF/GRDRL
Stands at 10.5 ft and retracts down to 29 inches. Gives you the ability to those hard to reach corners of the house. Features patented True Telescoping Technology. Aerospace engineered using airplane grade alumium alloy for strength. Double overmolded feet for durability and traction. Angled thumb release to ensure proper hand position. Integrated carrying handle for easy transportation. Clean touch anodized finish. Dimensions: Height Closed: 29", 19" W x 4" D. Weighs 20 pounds. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Includes safety rail to hold on to, for stability and Convenient fold away tool shelf for paint can, bucket, screws, nails and tools. Use it as a cart to haul your equipment and heavy loads to and from job sites. Use as a workbench. Multi-level working area. Adjust platforms up to the desired level for a comfortable workplace. Assembled size: 49.5 x 22.5 x 57.75in. Weighs 59 Lb. 9ft reach. Powder coated. 2 anti-slip platform. 4in double locking heavy duty. Meets ANSI, OSHA, and CSA standards.
Werner T6206 Twin Ladder Louisville Ladder SRA10-06 Ladder Display Rack Werner 7406 Extra Step Ladder
Twin front is designed for use by two people, one on each side. Features high performance dual holster top, paint and tool holder. Four rivets attach top to each front rail. All steps are knee braced. Heavy duty internal spreaders. Double riveted, slip-resistant Traction-Tred steps. Edge molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Every rivet is backed up by a metal part or washer to protect side rails. Orange fiberglass side rails and heavy gauge plastic top distinguish ladder. Steps are on both sides of this quality Werner ladder. Front and rear rails are made of 3-1/8" wide fiberglass with a 1-3/16" flange. Non-conductive fiberglass rails feature a non-irritating fabric out mat which assures a smooth trouble free surface even after weathering. Complies with OSHA. Ladder includes pinch proof solid internal steel spreaders, and Ribbed slip resistant rubber foot pads that are protected by an aluminum shoe. Holds 6 ladders. Includes accessory tray. 3.83' x 2.16' footprint. Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards.
Louisville FE0600 Commercial Extension Ladder Louisville AE4220PG 2-Section Extension Ladder Werner D1220-2 Multi-Section Extension Ladder
Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner MT-17 Telescoping Multi-Ladder Werner D1200-2 Compact Multi-Section Telescoping Extension Ladder Werner 370 Single Sided Step Ladder With Pail Shelf
Smooth curved rails, double riveted steps, extra wide flared bottom with slip resistant feet. Converts to twin stepladder, stairway stepladder, extension ladder and 2-scaffold bases. Stair and step height 4' to 7', scaffold length 1' to 3', rails  2-5/8" wide, steps 1" wide, and flange 1" wide. Compact design retracts to 6'3". Twist-Proof due to the Alflo rung joints. Mar-resistant end caps. Heavy duty modified I-Beam side rails. 1-3/4" Slip-resistant Traction-Tred D-rungs. Durable extruded rung locks are spring loaded to operate smoothly. Convenient carry handle. Overlapping rung location for improved foot comfort. Use indoors or outdoors. Easy to maneuver around corners and through doors. Durable shoe rest flat on slip resistant pad or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1"; Base width 17-3/8" outside rails. Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide.
Werner D1124-2 Multi-Section Extension Ladder Werner 7308 Single Sided Step Ladder Louisville L-2324 Extension Ladder
Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections. Extruded heavy gauge aluminum Tool-Tra-Top. Traction-Tred deeply serrated aluminum steps, double riveted. Heavy duty 1" inside plated steel spreader bars. Optional black pail shelf kit: Model No. 76-3. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Massive 3/16" thick side plates. Four solid 1/4" aluminum rivets attach top to front rail. 5/16" shoulder bolt and lock nut on top hinge. Every rivet backed up by metal part or washer to protect fiberglass. U-channel double braces on bottom step. Yellow fiberglass side rails with non- irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front rails 3-1/8" wide; Front flange 1-3/16" wide; Top 7-1/4"W x 14-7/8"L; steps 3" wide; Rear rails 1-7/8" wide; Rear flange 1-3/16. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley.
Mintcraft Pro YH-GR001B Guard Rail Werner D5916-2 Multi-Section Extension Ladder Louisville AS3000 Step Ladder
Yellow powder coated finished. Assembled size on scaffolding: 69-1/2"W x 28-3/4"d x 41-1/4"H. Foldable. Steel material. One piece. For use with SKU# 879.5478. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Dimensions: Rails 3-3/16" wide, flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Structural molded top with recessed tray. Large parts tray recessed 1/4" deep with tool slots. Heavy-duty side rails are full channel extrusions on the front and modified channel on back legs. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" Wide.
Werner Old Blue Single Sided Step Ladder Louisville FT1000 Tripod Ladder Werner PD6204 Podium Ladder
Customized HolsterTop with lock-in accessory system secures tools from falling. Convenient conduit cutting system. Built-in wire spool holders allow for even pulling from both large and small spools. Rugged professional grade bracing. 3 ToolLasso included. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide. Non-conductive. Includes steel reinforced outrigger, center-pull spreader brace, outrigger rail brackets, double-rivet step construction, heavy duty steel gusset bracing and full metal boot. Meets  or exceeds the safety standards set by ANSI and OSHA. 3" steps. Dimensions: 14" x 6-1/2" top, 3-1/8" x 1-1/8" front rails, 1-1/2" square. Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced
Louisville L-2095 Ladder Core Distribution 770P Xtend+Climb Aluminum Telescoping Ladders Louisville PD9000 Scaffold Platform
Use as a straight/extension ladder (L-2098-17: 9 to 15; L-2098-22: 11' to 19'), twin stepladder or  stairway ladder (L-2098-17: 4' to 7'; L-2098-22: 5' to 9') and plank support (L-2098-17: 1' to 4'; L-2098-22:1' to 5'). Includes heavy duty locking pins and quick activating snap-lock hinge. Provides stability and versatility for the most demanding projects. Designed with homeowners and do-it-yourselfers in mind. The ladder locks by the foot, so it's only as tall as you need it to be. Features patented True Telescoping Technology. Aerospace engineered using airplane grade aluminum alloy for strength. Double overmolded feet for durability and traction. Angled Thumb Release to ensure proper hand position. Integrated carrying handle for easy transportation. Clean Touch Anodized Finish is easy to clean. Storage dimensions: 32?H x 20?W x 5?D. 16.5 ft. stands at height. 27lbs. Includes safety latch. Solid bolt construction. 2" rail size.
QualCraft Safe-T Ladder Extension System Louisville AE4224PG 2-Section Extension Ladder DeWalt DXL3810-06 Step Ladder
Requires no tools, drilling or bolting to hold it securely in place. Aluminum design keeps handles from getting hot in the sun. Simple to use knob, tightens by hand without scratching or damaging ladder. Cushioned bumper pads help to protect the eaves of the roof. Added hand grips for easier usage. Safety latch prevents unit from slipping off ladder. Complies with OSHA standard 1926.502 (b)(3), 1926.1053 (b)(1) and ANSI standard 14.2 section 8.3.3. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Expand work step with 25-percent greater step surface, 3.75" step size. Metal top complete with tool slots and magnet. Wrap-around internal spreaders for strength and durability. Impact absorption system protects against damage. Heavy-duty boot with maximum slip-resistant surface area.
Werner D1224-2 Multi-Section Extension Ladder Werner D1320-2 Multi-Section Extension Ladder Werner D1516-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
Werner T7406 Multi-Use Twin Step Ladder Werner D5920-2 Multi-Section Extension Ladder Werner D6216-2 Multi-Section Extension Ladder
Orange, electrically non-conductive side rails, heavy gauge aluminum extrude top, thick side plates. Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each rail. Back-up aluminum plates reinforce all top connectors. Extra heavy duty internal spreaders. Slip-resistant traction-tred steps are double riveted and knee-braced. Aluminum external rail shields help protect against abrasion damage. Rubber step bumpers to resist damage. The edge bracing system helps to decrease damage to rail. Shoe pads riveted to the edge structure. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/4" x 14-1/2", step 3" wide. Rails 3-1/8" wide, flange 1-3/16" wide. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Rugged gravity-spring locks operate smoothly. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
Werner 7408 Extra Step Ladder Louisville FE1700 2-Section Extension Ladder Louisville L-2324 Extension Ladder
Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards. Quicklatch equipped runglock provides easier method of securing fly base sections when extended. One finger operation. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Does not include rope and pulley. Dimensions: 3-1/4' rail depth, 5-3/4' stack height, 14-11/16" base inside, 13-11/16" fly inside, 17-11/16" base outside and 16-1/16" fly outside. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley.
Louisville FE3200 2-Section Extension Ladder Werner D6016-2 Multi-Section Extension Ladder Werner PD6206 Podium Ladder
Mar-resistant end caps on all rail ends provide rail protection for longer life and protect work surface from marring. Heavy-duty plated steel swivel safety shoes with thick rubber tread. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Dimensions for 16': Rails 3-1/4" wide; 1.2" Rail flange; 1.626" Rung; Base outside width 17-1/16"; Fly outside width 16-1/16". Dimensions for 40': Rails 3-5/16" wide;  Rail flange; Rung; Base outside width 17-11/16"; Fly outside width 16-11/16". Meets or exceeds the safety standards set by ANSI and OSHA. FE3216 does not include rope and pulley. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced
OUTRIGGER W/CASTER 6IN        GUARDRAIL ST F/BKR SCFLD 6FT  SCAFFOLD W/CSTR GDRL/TRY 4X5FT
OUTRIGGER W/CASTER 6IN
Our Price: $199.99
Specifications: 21.5 x 4 x 26.5 in. assembled, weighs 52 lb, 6 in. double locking heavy duty casters. Includes 4 outriggers, 4 casters and 12 locking pins. Compatible with I-BMSS. Meets ANSI, CSA and OSHA standards. Assembled size: 69.5 x 30 x 41.5 in. Weighs 60 Lb. 1in 16 gauge structure. Includes 2 guardrails with gates and 4 toggle pins. Compatible with I-BMSS, I-CISC, I-CISCTP AND I-CAISC. Meets ANSI, OSHA, and CSA standards. Use it as a cart to haul your equipment and heavy loads to and from job sites. Folds flat for compact storage and transport. Safety rail to hold on to for stability. Fold away tool shelf for paint can, bucket, screws, nails and tools. Assembled size: 50.5 x 23.75 x 61.5in. Weighs 69 Lb. 9ft reach. Powder coated. 2 anti-slip 14 gauge steel platform. 5in double locking heavy duty. Meets ANSI, OSHA, and CSA standards.
OUTRIGGER INT SCAFFOLD 6FT    SCAFFOLD EXT JOBSITE 39IN     SCAFFOLD EXT BAKER 40IN
OUTRIGGER INT SCAFFOLD 6FT
Our Price: $199.99
SCAFFOLD EXT JOBSITE 39IN
Our Price: $199.99
SCAFFOLD EXT BAKER 40IN
Our Price: $199.99
Specifications: 19.25 x 4.5 x 24 in. assembled, weighs 45 lb, 5 in. double locking heavy duty casters. Includes 4 outriggers, 4 casters and 12 locking pins. Compatible with I-CISCPY. Meets ANSI, CSA and OSHA standards. Compatible with I-CISC, I-CISCTP and I-BMSS scaffolds. Assembled Dimensions 73.75 x 29 x 42.5 in. Meets ANSI, CSA and OSHA standard. Weighs 60.2lb. Includes 2 side frames, 2 braces, 8 locking pins. Compatible with -CISCPY & NU-WAVE / PERRY MODEL 660 scaffolds. Assembled Dimensions 73.75 x 30.5 x 43.5 in. Meets ANSI and OSHA standard. 63 lb weighs. Powder Coated finish. Includes 2 side frames, 2 braces, 8 locking pins.
Werner T6208 Twin Ladder Werner D1128-2 Multi-Section Extension Ladder Werner D1520-2 Multi-Section Extension Ladder
Twin front is designed for use by two people, one on each side. Features high performance dual holster top, paint and tool holder. Four rivets attach top to each front rail. All steps are knee braced. Heavy duty internal spreaders. Double riveted, slip-resistant Traction-Tred steps. Edge molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Every rivet is backed up by a metal part or washer to protect side rails. Orange fiberglass side rails and heavy gauge plastic top distinguish ladder. Steps are on both sides of this quality Werner ladder. Front and rear rails are made of 3-1/8" wide fiberglass with a 1-3/16" flange. Non-conductive fiberglass rails feature a non-irritating fabric out mat which assures a smooth trouble free surface even after weathering. Complies with OSHA. Ladder includes pinch proof solid internal steel spreaders, and Ribbed slip resistant rubber foot pads that are protected by an aluminum shoe. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
Louisville FS1510 Extra Step Ladder Werner D6020-2 Multi-Section Extension Ladder Werner 6210 Single Sided Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
Werner T6008 Twin Ladder Werner MT-22 Telescoping Multi-Ladder Louisville L-2095 Ladder
Back-up aluminum plates reinforce all top connectors. Braces on top and bottom steps. Combination rail end shield and foot with slip-resistant foot pad. Rubber step bumpers to resist damage. Slip-resistant traction-tred steps on front and rear sections. External Pinch-Proof spreaders. Tool-Tra-Top with dual drill holster, tool and small parts tray. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/2" x 13"; Steps 3" wide; Rails 3-1/8" wide; Flange 1-1/8" wide. Smooth curved rails, double riveted steps, extra wide flared bottom with slip resistant feet. Converts to twin stepladder, stairway stepladder, extension ladder and 2-scaffold bases. Stair and step height 5' to 9', scaffold length 1' to 4', rails  2-5/8" wide, steps 1" wide, and flange 1" wide. Use as a straight/extension ladder (L-2098-17: 9 to 15; L-2098-22: 11' to 19'), twin stepladder or  stairway ladder (L-2098-17: 4' to 7'; L-2098-22: 5' to 9') and plank support (L-2098-17: 1' to 4'; L-2098-22:1' to 5'). Includes heavy duty locking pins and quick activating snap-lock hinge. Provides stability and versatility for the most demanding projects.
Mintcraft Pro YH-SD601 Scaffold Louisville FM1500 Twin Step Ladder Louisville FE3200 Extension Ladder
Includes four 5" swivel caster with brakes and a 28-3/32" W x 66-1/2" L x 15/32" T plywood board. Yellow powder coating finish. Size: 75"H  x 73-3/4"W x 29-1/4" D, Adjustable height: 27-15/16" - 71-1/4", heavy-duty square tube: 1-1/2" x 1-1/2" x 1/16, Non-conductive. DA BOOT, a polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Heavy gauge steel hinges. Reinforced bottom step. Inside spreader braces. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: 12-3/4" x 9" top, 3" x 1-1/2" steps, 3-1/8" x 1-1/8" rails and flange 3-1/8" x 1-1/8". Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside.
QualCraft 2431 3-Rung Ladder Jack Louisville FE0600 Commercial Extension Ladder Werner D5924-2 Multi-Section Extension Ladder
MIG welded and riveted construction. Will work on either inside or outside ladder face. Will accommodate up to 18" wide-plank. Adjustable to fit round or D-Rung ladders. Complies with OSHA requirements. Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections.
Werner PA200 Extension Plank Louisville AE3200 Extension Ladder SCAFFOLD BRAKE 2CT
SCAFFOLD BRAKE 2CT
Our Price: $229.99
Twist-proof stage design. Individual slip-resistant decking minimizes paint or material build-up. Vinyl-coated end caps serve as hand grips and protects from sharp edges and surface marks. Double end rung provides extra rigidity on stages 20' or longer - standard on stages with 5" or 6" rails. Closed position 8'; open position 13', and plank width 14". Inner rails 1-1/8" x 2", Outer flanged rails: 1-7/8" x 2". Meets ANSI and OSHA Standards. Mar-resistant end caps on all rail ends provide rail protection for longer life and protect work surface from marring. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base section from coming apart. Heavy-duty steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. QuickLatch equipped runglock provides easier method of securing fly base sections when extended. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Dimensions: Rails 3" wide; 1.125" Rail Flange; 1.626" Rung; Base outside width 17-1/2"; Fly outside width 16-3/16". Meets or exceeds the safety standards set by ANSI and OSHA. Compatible with I-CISC, I-CISCTP, I-CAISC, I-CISCPY and I-BMSS scaffolds. Includes two safety brakes. Assembled Dimensions 29.25 x 7.5 x 71.9 in. Weighs 31.1 lb. Meets ANSI, OSHA and CSA standard.
Werner 6212 Single Sided Step Ladder DeWalt DXL3010-10 Step Ladder Werner D6220-2 Multi-Section Extension Ladder
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
LADDER IA FBRGLS CRS-STEP 10FT SCAFFOLD EXT BAKER 3X6FT      Werner D1228-2 Multi-Section Extension Ladder
SCAFFOLD EXT BAKER 3X6FT
Our Price: $239.99
Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Compatible with BuildMan 6? Drywall Baker I-BMSS scaffolds. Assembled Dimensions 74-1/4 x 30-3/4 x 39-3/4in. Meets ANSI, OSHA and CSA standards. 88.8lb weighs. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D6024-2 Multi-Section Extension Ladder Louisville FE3200 Extension Ladder With Pro Top Louisville AE4228PG 2-Section Extension Ladder
Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
Xtend+Climb Professional Telescoping Ladder Core Distribution 780P Xtend+Climb Aluminum Telescoping Ladders SCAFFOLD BKR STYLE 1000LB 6FT
Heavy-duty ladder used by commercial contractors. It opens to 15.5 feet, and closes to 36 inches. The ladder locks by the foot, so it's only as tall as you need it to be. Features patented True Telescoping Technology. Aerospace engineered using airplane grade aluminum alloy for strength. Double overmolded feet for durability and traction. Angled Thumb Release to ensure proper hand position. Integrated carrying handle for easy transportation. Clean Touch Anodized Finish is easy to clean. Storage dimensions: 36?H x 19.75?W x 4.5?D. 36lbs. Heavy-duty ladder used by commercial contractors. It opens to 12.5 feet, and closes to 32 inches. The ladder locks by the foot, so it's only as tall as you need it to be. Features patented True Telescoping Technology. Aerospace Engineered using airplane grade aluminum alloy for strength. Double overmolded feet for durability and traction. Angled Thumb Release to ensure proper hand position. Integrated carrying handle for easy transportation. Clean Touch Anodized Finish is easy to clean. Storage dimensions: 32?H x 19.75?W x 4.5?D. 32lbs. Has a 12ft reach and is stackable up to three units high in order to reach a range of 24ft. Suitable and safe for all types of interior work. Each end can adjust separately to be used on both level surfaces and stairways. At 29.75in wide, it can roll through doorways. Assembled size: 74.75 x 29.75 x 75in. Weighs 127 Lb. From 27 to 73in working Heights. 2in increment adjustable heights. Powder coated. 1/2in plywood thick with protective steel edge banding platform. 5in double locking heavy duty. Meets ANSI, OSHA, and CSA standards.
DeWalt DXL3810-08 Step Ladder Werner D1324-2 Multi-Section Extension Ladder Werner D1524-2 Multi-Section Extension Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Metal top complete with tool slots and magnet. Wrap-around internal spreaders for strength and durability. Impact absorption system protects against damage. Heavy-duty boot with maximum slip-resistant surface area. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
Werner T7408 Multi-Use Twin Step Ladder Werner 410 Single Sided Step Ladder Werner 7410 Extra Step Ladder
Orange, electrically non-conductive side rails, heavy gauge aluminum extrude top, thick side plates. Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each rail. Back-up aluminum plates reinforce all top connectors. Extra heavy duty internal spreaders. Slip-resistant traction-tred steps are double riveted and knee-braced. Aluminum external rail shields help protect against abrasion damage. Rubber step bumpers to resist damage. The edge bracing system helps to decrease damage to rail. Shoe pads riveted to the edge structure. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/4" x 14-1/2", step 3" wide. Rails 3-1/8" wide, flange 1-3/16" wide. Heavy duty extruded Tool-Tra-Top. Four solid 1/4" rivets attach top to front rails on each side. 5/16" shoulder bolt and lock nut on top hinge. Massive 3/16" thick side plates. Outside spreaders on 4', 5' and 6' models. Inside spreaders on 8' and above models. Rear horizontals are spaced 12" apart with knee-bracing which is mounted on full U-channel rear rails. Heavy duty black slip-resistant feet. Traction-Tred deeply serrated steps. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3-3/8" wide; Front Flange 1-1/8" wide; Rear Rails 1-3/4" wide; Rear Flange 1" wide; Top 7" wide x 14" long; Steps 3" wide. Rental. Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards.
Werner 2000 One Person Slip Resistant Decorator Plank Louisville FS1512 Extra Step Ladder CART DRYWALL W/TEFLON
CART DRYWALL W/TEFLON
Our Price: $269.99
Twist-proof stage design. Individual slip-resistant decking minimizes paint or material build-up. Vinyl-coated end caps serve as hand grips and protects from sharp edges and surface marks. Double end rung provides extra rigidity on stages 20' or longer - standard on stages with 5" or 6" rails. Meets ANSI and OSHA Standards. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Specifications: 38 X 20 X 44.5in assembled. 10.5 x 38 in platform. Can carry up to 20 gypsum boards of 1/2 in. 71.5 Lb. Handle bar: 1.125 in. 13 gauge steel outside diameter. 8in polyurethane casters on polypropylene core. Includes 4 swivel casters, directional lock and caster brake. Standard sliding coating. Meets ANSI, CSA and OSHA standard. Powder coated.
DeWalt DXL3020-24PT Extension Ladder Werner D6224-2 Multi-Section Extension Ladder The Equalizer D1800-2 Multi-Section Extension Ladder
Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Eliminates uneven ground. Easy to use, adjust 3/8" increments up to 8-1/4". Convenient, built in bubble level. Dual action foot for use on hard or penetrable surfaces. Lightweight aluminum. Exclusive Alflo Twist-Proof performance. Slip-resistant steps and rugged locks. Reaches areas of the home that traditional ladders cannot. Dimensions: rails 3-5/16" wide, rungs 1-1/2", base widths 17-3/4" outside shoes, flange 1-3/16" wide and fly width 15-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Louisville FE3200 Extension Ladder Werner D1328-2 Multi-Section Extension Ladder Werner D6028-2 Multi-Section Extension Ladder
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Werner D1232-2 Multi-Section Extension Ladder Werner D6228-2 Multi-Section Extension Ladder The Equalizer D8200-2EQ Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Adjust 3/8" increments up to 8-1/4". Dual action foot for use on hard or penetrable surfaces. Non-conductive, 7-layer construction fiberglass side rails. ALFLO twist-proof performance. Slip-resistant steps and rugged locks. Dimensions: rails 3" wide, rungs 1-3/4", base widths 17-3/8" outside rails (20-3/4" to outside of feet, flange 1-1/16" wide and fly width 14-1/4" outside. Length of extension ladders when not extended is half the total length of the sections.
SCAFFOLD INT PERRY STYLE 6FT  DeWalt DXL3020-28PT Extension Ladder Werner D1528-2 Multi-Section Extension Ladder
Suitable and safe for all types of interior work. Each end can adjust separately to be used on both level surfaces and stairways. At 31in wide, it can roll through doorways. Assembled size: 73.75 x 29.25 x 78.75in. Weighs 147.4 Lb. From 27 to 75.75in working Height. 2in increment adjustable heights. 12ft stackable up to 3 units high for 24 ft reach. Powder coated. 5/8in plywood thick with protective steel edge banding and anti-slip platform. 5in double locking heavy duty. Perry scaffold style compatible. Meets ANSI, OSHA, and CSA standards. Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
LADDER IA FBRGLS CRS-STEP 12FT Werner 412 Single Sided Step Ladder Louisville AE4232PG 2-Section Extension Ladder
Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Heavy duty extruded Tool-Tra-Top. Four solid 1/4" rivets attach top to front rails on each side. 5/16" shoulder bolt and lock nut on top hinge. Massive 3/16" thick side plates. Outside spreaders on 4', 5' and 6' models. Inside spreaders on 8' and above models. Rear horizontals are spaced 12" apart with knee-bracing which is mounted on full U-channel rear rails. Heavy duty black slip-resistant feet. Traction-Tred deeply serrated steps. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3-3/8" wide; Front Flange 1-1/8" wide; Rear Rails 1-3/4" wide; Rear Flange 1" wide; Top 7" wide x 14" long; Steps 3" wide. Rental. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
Louisville AE3200 Extension Ladder SCAFFOLD BKR W/CASTER 6INX6FT Werner D1332-2 Multi-Section Extension Ladder
Mar-resistant end caps on all rail ends provide rail protection for longer life and protect work surface from marring. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base section from coming apart. Heavy-duty steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. QuickLatch equipped runglock provides easier method of securing fly base sections when extended. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Dimensions: Rails 3" wide; 1.125" Rail Flange; 1.626" Rung; Base outside width 17-1/2"; Fly outside width 16-3/16". Meets or exceeds the safety standards set by ANSI and OSHA. Stackable up to two units high in order to reach a range of 18ft. Suitable and safe for all types of interior work. Each end can adjust separately to be used on both level surfaces and stairways. At 31in wide, it can roll through doorways. Platform height adjusts at 2in increments from 28in to 71.5in Double prong spring-loaded locking mechanism. Deck braces allow movement over lower obstacles. Assembled size: 75.75 x 31 x 76 in. Weighs 165 Lb. From 29 to 71.5in working Heights. Powder coated. 19/32in plywood, slip-resistant platform. 6in double locking heavy duty. Meets ANSI, OSHA, and CSA standards. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D1532-2 Multi-Section Extension Ladder Werner 2000 One Person Slip Resistant Decorator Plank Werner D6232-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Twist-proof stage design. Individual slip-resistant decking minimizes paint or material build-up. Vinyl-coated end caps serve as hand grips and protects from sharp edges and surface marks. Double end rung provides extra rigidity on stages 20' or longer - standard on stages with 5" or 6" rails. Meets ANSI and OSHA Standards. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
Louisville FE3200 Extension Ladder Werner D1240-2 Multi-Section Extension Ladder Werner D1340-2 Multi-Section Extension Ladder
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D6240-2 Multi-Section Extension Ladder Werner D1540-2 Multi-Section Extension Ladder Louisville FE3200 2-Section Extension Ladder
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Mar-resistant end caps on all rail ends provide rail protection for longer life and protect work surface from marring. Heavy-duty plated steel swivel safety shoes with thick rubber tread. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Dimensions for 16': Rails 3-1/4" wide; 1.2" Rail flange; 1.626" Rung; Base outside width 17-1/16"; Fly outside width 16-1/16". Dimensions for 40': Rails 3-5/16" wide;  Rail flange; Rung; Base outside width 17-11/16"; Fly outside width 16-11/16". Meets or exceeds the safety standards set by ANSI and OSHA. FE3216 does not include rope and pulley.
   
 
1