Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS
Choose a sub category:
SPRAY STAIN KILLERS PRIMERS - OIL BASED SHELLAC BASED & ALCOHOL BASED
PRIMERS - WATER BASED WOOD PROTECTORS WOOD PRESERVATIVES
MULTI-SURFACE SEALERS MASONRY SEALERS SANDING SEALERS
FABRIC SEALERS/WATERPROOFERS MISC PRIMERS/SEALERS
Sort By:
1
WaterSeal 10100 Multi-Surface Waterproofer Thompsons TH.010501-18 Sports Seal Fabric Protector Rustoleum Cover-Stain Primer Sealer
WaterSeal Multi-Surface Waterproofer, 12 oz Capacity, Aerosol Can Packing, 2.99 lb/gal VOC, Clear, 24 hr Drying Time, 48 hr Application, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, Composition: Med. Aliphatic Hydrocarbon Solvent, 0.97 Specific Gravity, 40 deg F Application, Applicable Materials: Wood, Concrete and Brick, Curing Method WaterSeal Fabric Protector, Series: Sport Seal, 11.5 oz, Aerosol Can Packing, 98 % VOC, Clear, Matte, 60 sq-ft Coverage, 24 hr Drying Time, Media: Carbon Dioxide, Dry Chemical and Foam, Composition: Propane, Butane, Mineral Spirits and Acetone, Flammability Rating: 4, 0.72 Specific Gravity, Application Method: Spray, <120 deg F Rustoleum Primer Sealer, Series: Cover-Stain, 13 oz Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Solvent Odor/Scent, 400 - 450 sq-ft Coverage, 30 min Drying Time, -105 deg C Flash Point, 525 g/l VOC, 40 - 80 deg F, For Cedar and Redwood
WaterSeal TH.041800-18 Waterproof Wood Sealer Thompsons TH.010502-18 Fabric Seal Fabric Protector WaterSeal TH.024104-14 Multi-Surface Waterproofer
WaterSeal Wood Sealer, Waterproof, 11 oz Capacity, Aerosol Can Packing, Sprayer Dispenser, Liquid, Clear, Mineral Spirit Odor/Scent, Composition: Med. Aliphatic Hydrocarbon Solvent, Propane, Butane, Heavy Paraffinic Oil, 0.72 Specific Gravity, -20.2 deg F Flash Point, >5 deg C, ASTM D4446, NIOSH/MSHA Approved, 25 sq-ft/can Coverage Area WaterSeal Fabric Protector, Series: Fabric Seal, 11.5 oz, Aerosol Can Packing, 98 % VOC, Clear, Matte, 60 sq-ft Coverage, 24 hr Drying Time, Media: Carbon Dioxide, Dry Chemical and Foam, Composition: Propane, Butane, Mineral Spirits and Acetone, Flammability Rating: 4, 0.72 Specific Gravity, Application Method: Spray, <120 deg F WaterSeal Multi-Surface Waterproofer, 1 qt Capacity, Can Packing, 2.99 lb/gal VOC, Clear, 24 hr Drying Time, 48 hr Application, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, Composition: Med. Aliphatic Hydrocarbon Solvent, 0.97 Specific Gravity, 40 deg F Application, Applicable Materials: Wood, Concrete and Brick, Curing Method, Resists
Masterchem 10002 Extra Strength Stain Killer Primer Sealer Kilz 20002 Primer Wolman Classic II Woodlife Wood Preservative
Masterchem Primer Sealer, Extra Strength, Stain Killer, Masterchem, 1 qt Capacity, Oil Base, Paste, Almond, Mild Odor/Scent, 26 ft Linear/1/4 in Head Coverage, 1.34 Specific Gravity, 0.14 VOC, 8.5 - 9 pH, 40 - 120 deg F, For Furniture, Drywall, Plaster, Woodwork, Paneling, Glossy Surfaces, Masonry, Brick, and Painted Surfaces Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Wolman Wood Preservative, Water Based, Series: Classic II, Woodlife, 1 qt Capacity, Can Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Clear, Mild Odor/Scent, Composition: Ethylene Glycol, 3-Iodo-2-Propynyl Butyl Carbamate, 1.0047 Specific Gravity, >200 deg F Flash Point, <250 g/l VOC, 50 - 90 deg F, EPA Registered, MSHA/NIOSH Approved
Kilz Original Interior Low VOC Primer Sealer Rustoleum Cover-Stain Interior/Exterior Primer Sealer Deft 015-13 Lacquer Sanding Sealer
Kilz Primer Sealer, Interior Low VOC, Series: Original, 1 qt Capacity, Oil Base, Alkyd Resin, Liquid, Clear, Smoke Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 344 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Rustoleum Primer Sealer, Interior/Exterior, Series: Cover-Stain, 1 qt Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 83 deg F Flash Point, 425 g/l VOC, 40 - 80 deg F, MPI No 5 Certified, For Cedar and Redwood Deft Lacquer Sanding Sealer, 12 oz Capacity, Aerosol Spray Packing, Liquid, Solvent Odor/Scent, 30 Min Drying Time, Application Method: Brush or Sprayer, For Interior Application
Zinsser 249019 Bulls Eye Zero Primer/Sealer Zinsser 02004 Bulls Eye 1-2-3 Primer/Sealer WATER REPELLENT CAR INTERIOR
Zinsser Primer Sealer, Series: Bulls Eye Zero, 1 qt, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 - 45 min to Touch, 1 hr to Recoat Drying Time, 1.273 Specific Gravity, >200 deg F Flash Point, 0 VOC, 50 - 85 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Zinsser Primer Sealer, Series: Bulls-Eye 1-2-3, 1 qt, Water Base, Styrenated Acrylic Resin, Liquid, White Emulsion, Acrylic Like Odor/Scent, 545 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 450 sq-ft/Gal Non-Porous and 350 sq-ft/Gal Porous Surfaces For Practical Coverage At Recommended DFT Coverage, 35 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Natural or Synthetic Bristle Brush, Roller, Pad or Sprayer, 1.26 Specific Gravity, >200 Deg F Flash Point, <100 g/l VOC, 9 - 10 pH, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications NeverWet Liquid Repelling Treatment, Series: Rust-Oleum, Auto Interior, 11 oz Capacity, Bottle, Liquid, Clear, Solvent Like Odor/Scent, Composition: Ethylene Glycol Methyl Ether, 7.8 pH, Standards: OSHA 1910.134, ANSI Z88.2, 20 - 50 sq-ft Coverage Area, For Leather, Cloth, Synthetic and Natural Fibers
California 50600-4 Primer/Sealer Kilz 13002 Primer Drylok 27512 Latex Based Masonry Waterproofer
FixAll Universal Primer, Series: 50600, 1 qt, Water Base, 100 % Acrylic Latex Resin, Viscous Liquid, White, Very Slight Odor/Scent, 300 - 350 sq-ft/Gal Smooth Surface, 175 - 225 sq-ft/Gal Porous Surface Coverage, 1/2 hr to Touch, 4 hr to Handle, 2 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, 8.5 pH, < 50 Deg F, Suitable For Use With: Wallboard  Plaster, Sheetrock, Masonry, Wood, Concrete, Galvanized Metal, Plastic Laminates, Vinyl Wall Coverings, Under Wall Coverings As Well As Previously Painted Surfaces, Standards: WHMIS Hazard Class Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Drylok Masonry Waterproofer, Latex Based, Series: 27512, White, 1 qt Capacity, Container Packing, 120 - 130 KU Viscosity, 75 - 100 sq-ft/gal Coverage, <50 deg F, 100 g/l VOC, 9.5 - 9.9 pH, 1.5 Specific Gravity, Typical Amine Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Spray, Resists: Hydrostatic Pressure and Wind Driven Rain
PRIMER SEALER 123 DEEP TINT QT Zinsser 249933 Bulls Eye - 123 Plus Primer/Sealer Kilz 10042 Interior Primer Sealer
Zinsser Primer Sealer, Series: Bulls Eye 1-2-3, Deep Tint, 1 qt, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 450 sq-ft Coverage, 35 min to Touch, 1 hr to Recoat Drying Time, 1.258 Specific Gravity, >200 deg F Flash Point, 65 g/l VOC, 50 - 90 deg F, Suitable For Use With: Natural or Synthetic Bristle Brush, Roller, Pad or Sprayer Zinsser Primer Sealer, Series: Bulls Eye 1-2-3 Plus, 1 qt, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Kilz Primer Sealer, Interior, Series: 10042, 1 qt Capacity, Oil Base, Acrylic Resin, Liquid, White, Odorless Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 331 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Paneling
Zinsser 249727 Smart Prime Primer/Sealer Green Products 33004 Wood Preservative Flood/PPG FLD4-01 E-B Emulsa-Bond Bonding Primer Additive
Zinsser Primer Sealer, Series: Smart Prime, 1 qt, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer, For Interior/Exterior Use Green Products Wood Preservative, Solvent Based, 32 oz Capacity, Can Packing, Brush Dispenser, Liquid, Brown, Pungent Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, For Window Frames, Doors Flood Paint Additive, 1 qt Capacity, Can, <350 g/l VOC, >21 cSt Viscosity, Liquid, Composition: Solvent Naphtha (Petroleum), Medium Aliph, Nonylphenol, Branched, Ethoxylated, 2-Butanone Oxime, 3-iodo-2-propynyl, Butylcarbamate,  Cobalt Bis(2-ethylhexanoate), Characteristic Odor/Scent, 50 - 90 Deg F, 174.2 Deg F Flash Point, Flammability Rating: 2, 0.95 Specific Gravity, Used in Exterior Latex or Acrylic Paints or Stain Recoating Chalky Aluminum Siding, T1-11 Plywood or Hardboard Siding and Cement Siding
Majic 8-1091 Barricade Primer and Paint Wolman Coppercoat Woodlife Wood Preservative Deft 015-04 Lacquer Sanding Sealer
Majic Barricade Primer and Paint, Series: 8-1091, Liquid, White, Flat, 1 gal Capacity, Can Packing, Vinyl Acrylic Latex Resin, Water Base, 300 sq-ft/gal Coverage, 50 deg F, >200 deg F Flash Point, 100 g/l VOC, 9.2 pH, 1.2196 Specific Gravity, Typical Latex Odor/Scent, Application Method: Brush, Roller, For Drywall Wolman Wood Preservative, Water Based, Series: Coppercoat, Woodlife, 1 qt Capacity, Container Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Green, Faint Amine Odor/Scent, Composition: Monoethanolamine, Copper Naphthenate, 1.04 - 1.07 Specific Gravity, >200 deg F Flash Point, <250 g/l VOC, 10.1 - 10.9 pH, 50 - 90 deg F, For Docks and Piers Deft Lacquer Sanding Sealer, 1 qt Capacity, Liquid, Crystal Clear, Solvent Odor/Scent, 30 Min Drying Time, Application Method: Brush or Sprayer, 0.881 Specific Gravity, -15 deg F Flash Point, For Interior Application
Cabot 8064 Sanding Sealer Green Products 33008 Oil Based Wood Preservative Zinsser 00904 B-I-N Primer/Sealer
Cabot Sanding Sealer, Water Based, Series: 8064, 1 qt Capacity, 30 - 50 cP Viscosity, Liquid, Clear, 100 - 125 sq-ft Coverage, 15 - 30 min Drying Time, 200 deg F Flash Point, Composition: Acrylic Resin, Flammability Rating: 0, 1.04 Specific Gravity, 50 - 90 deg F Application, 50 - 90 deg F, Resists: Sand Paper? Gumming, For Interior Green Products Wood Preservative, Oil Based, 14 oz Capacity, Aerosol Can Packing, Sprayer Dispenser, Liquid, Brown, Pungent Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, For Window Frames Zinsser Primer Sealer, Series: B-I-N, 1 qt, Shellac Resin, Liquid, White, Solvent Like Odor/Scent, 565 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 500 sq-ft/Gal Practical Coverage At Recommended DFT Coverage, 20 min to Touch, 45 min to Recoat, 1-3 Days to Full Cure Drying Time, Application Method: Brush, Roller, Spray, 54 Deg F Flash Point, 584 g/l VOC, 0 - 90 Deg F, Suitable For Use With: Water, Grease, Rust, Smoke, Asphalt, Graffiti and Many Other Types Of Stain, For Interior Applications
California 20701-4 Stain Killer Primer Old Masters 92604 Penetrating Sealer WATER REPELLENT OUTDOOR FABRIC
FixAll Stain Killer Primer, Series: 20701-4, 1 qt Capacity, Oil/Latex Base, Alkyd Resin, Viscous Liquid, Slight Ammonia Odor/Scent, ANSI Z400.1-2004 Certified Old Masters Penetrating Sealer, Series: 92604, 1 qt Capacity, 200.13 g/l VOC, 16 - 18 sec at 77 deg Viscosity, 230 - 470 sq-ft/gal Coverage, 10 - 12 hr Drying Time, 102 deg F Flash Point, Composition: Solvent Naphtha, Medium Aliphatic, Cobalt Compounds, Applicable Materials: Wood, Masonry and Concrete, For Interior and Exterior NeverWet Fabric Water Repelling Treatment, Series: Rust-Oleum, 11 oz Capacity, Bottle, Liquid, Clear, Solvent Like Odor/Scent, Composition: Hydrotreated Light Distillate, Mineral Spirits , Aromatic Petroleum Distillates, 46 Deg C Flash Point, Standards: OSHA 1910.134, ANSI Z88.2, 20 - 60 sq-ft Coverage Area, For Leather, Suede, Polyester, Cotton/Poly Blends and Canvas
WATER REPELLENT BOOT/SHOE     WATER REPELENT HUNTING/OUTDOOR Old Masters 45004 Oil Based Sanding Sealer
NeverWet Water Repelling Treatment, Series: Rust-Oleum, Boot and Shoe, 11 oz Capacity, Bottle, Liquid, Clear, Solvent Like Odor/Scent, Composition: Mineral Spirits, Aromatic Petroleum Distillates, 46 Deg C Flash Point, Standards: OSHA 1910.134, ANSI Z88.2, 20 - 60 sq-ft Coverage Area, For Leather, Suede, Nubuck, Canvas and More NeverWet Fabric Water Repelling Treatment, Series: Rust-Oleum, Hunting and Outdoor, 11 oz Capacity, Bottle, Liquid, Clear, Solvent Like Odor/Scent, Composition: Mineral Spirits, Aromatic Petroleum Distillates, 41 Deg C Flash Point, Standards: OSHA 1910.134, ANSI Z88.2, 20 - 60 sq-ft Coverage Area, For Polyester, Canvas, Nylon, Suede and More Old Masters Sanding Sealer, Oil Based, Series: 45004, 1 qt Capacity, 535.68 g/l VOC, 25 - 30 sec at 77 deg Viscosity, 445 sq-ft/gal Coverage, 2 - 3 hr Drying Time, 42 deg F Flash Point, Applicable Materials: Wood, Application Method: Bristle/Polyester Brush and Spray, For Interior
Zinsser 2241 Bulls Eye Primer/Sealer Varathane 224741H Sanding Sealer Cabot 8065 Quick Dry Sanding Sealer
Zinsser Primer Sealer, Series: Bulls Eye, 1 gal, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.383 Specific Gravity, >200 deg F Flash Point, 95 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Varathane sanding sealer seals wood pores and provides a surface that can be easily sanded. It is suitable for use for all interior projects such as furniture, doors, cabinets and trim. It dries clear and provides the convenience of easy soap and water clean-up. Varathane sanding sealer is a universal sanding sealer that can be used under any wood finish including oil or water-based polyurethanes, as well as lacquer or shellac finishes, or it is suitable as a base finish coat. It is not recommended for linoleum, vinyl or lazed tile, or metal surfaces.  Varathane Sanding Sealer, Universal, 1 qt Capacity, 120 g/l VOC, Liquid, Ultra Smooth, 60 - 90 sq-ft/qt Practical, 346 sq-ft/gal Theoretical Coverage, 1 hr Touch Drying Time, 3 days Functional Cure, Solvent Like Odor/Scent, 200 deg F Flash Point, Media: Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand and Water Fog, Flammability Rating: 1 Cabot Sanding Sealer, Quick Dry, Series: 8065, 1 qt Capacity, 550 g/l VOC, 50 - 150 cP Viscosity, Liquid, Clear, Satin, 100 - 125 sq-ft Coverage, 15 - 30 min Drying Time, 61 deg F Flash Point, Composition: Naphtha, Zinc Stearate, Ethylbenzene, Flammability Rating: 3, 0.860 Specific Gravity, 50 - 90 deg F Application, 50 - 90 deg F, For Interior
Zinsser Bulls Eye SealCoat Sanding Sealer Zinsser Bulls Eye SealCoat Oil Based Wood Sealer Minwax 65700 Sanding Sealer
Zinsser Sanding Sealer, Universal, Series: Bulls Eye SealCoat, 1 qt Capacity, 653 g/l VOC, 15 cP Viscosity, 5.2 - 5.5 pH, Liquid, Amber, 400 - 600 sq-ft/gal Coverage, 5 - 10 min Touch, 20 - 45 min Recoat Drying Time, Alcohol Odor/Scent, 55 deg F Flash Point, Composition: Ethyl Alcohol, Isopropyl Alcohol, Methyl Isobutyl Ketone Zinsser Wood Sealer, Oil Based, Series: Bulls Eye SealCoat, 1 qt Capacity, 660 g/l VOC, Liquid, Clear, Flat/Matte, 75 sq-ft/gal Coverage, 15 min Drying Time, Alcohol Odor/Scent, >43 deg C Flash Point, Media: Alcohol Film Forming Foam, Carbon Dioxide, Dry Chemical and Water Fog, Composition: Ethanol, 2-Propanol, Flammability Rating: 4 Minwax Sanding Sealer, Water Based, Series: 65700, 1 qt Capacity, 182 g/l VOC, >2, <11.5 pH, Cream, 125 sq-ft/qt Coverage, 1 hr Drying Time, Composition: 2-Methoxymethylethoxypropanol, Flammability Rating: 0, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Synthetic Bristle Brush and Foam Applicator/Synthetic Pad
NeverWet 274232 Repelling Treatment Moist Kit California 50500-4 Primer/Sealer Quikrete 8730-02 Concrete Cure and Seal
NeverWet Repelling Treatment Moist Kit, Liquid, Frosted Clear, Flat, 18 oz Capacity, Aerosol Packing, 10 sq-ft/can Coverage, 55 - 90 deg F, -156 deg F Flash Point, 514 g/l VOC, 0.731 Specific Gravity, Solvent Like Odor/Scent, Application Method: Sprayer, ANSI Z88.2, OSHA 1910.134, For Interior/Exterior Application FixAll Bonding Primer, Series: Grip-Coat 50500, 1 qt, Water Base, Urethane-Modified Acrylic Resin, Viscous Liquid, White, Slight Ammoniacal Odor/Scent, 400 - 450 sq-ft/Gal Smooth Surface, 200 - 275 sq-ft/Gal Porous Surface Coverage, 1 hr to Touch, 6 hr to Handle, 4 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, < 50 Deg F, Suitable For Use With: PVC, Glass, Fiberglass, Glossy Paints, Tile Or Glazed Block, Galvanized Metal, Aluminum, Copper, Lead and Tin Quikrete Concrete Cure and Seal, Quikrete, 1 gal Capacity, Bottle Packing, 32 g/l VOC, 1000 cP Viscosity, Liquid, Milky White, 200 sq-ft/gal Coverage, 4 - 6 hr Application, 24 hr Functional Cure, Flammability Rating: 0, 50 deg F Application, Application Method: Sprayer Nozzle, Water Base, 40 - 100 deg F, ASTM C309
Wolman Classic II Woodlife Wood Preservative Damtite 01071 Waterproofer Powder Rustoleum 247596 Magnetic Primer
Wolman Wood Preservative, Water Based, Series: Classic II, Woodlife, 1 gal Capacity, Can Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Clear, Mild Odor/Scent, Composition: Ethylene Glycol, 3-Iodo-2-Propynyl Butyl Carbamate, 1.0047 Specific Gravity, >200 deg F Flash Point, <250 g/l VOC, 50 - 90 deg F, EPA Registered, MSHA/NIOSH Approved Damtite Powder Waterproofer, Heavy Duty, 7 lb, Pail, 12 pH, Powder, White, 93 sq-ft Coverage, 24 - 48 hr Drying Time, 15 Min Setting, Earthy Odor/Scent, Media: Dry Chemical, Foam, Carbon Dioxide, Water Spray, Composition: Crystalline Silica, Titanium Dioxide, Flammability Rating: 0, 1.26 Specific Gravity, >50 Deg F Application, Applicable Materials: Concrete Block, Cinder-Block, Poured Concrete, Fieldstone, Masonry, Brick and Stucco, Application Method: Nylon Paint Brush or Roller, Portland Cement Base, Mixing Ratio: 2:1, Paint Stirrer or Attachment To Electric Drill Mixing, 3 Mixing Steps, 22 psi, Resists: Mold or Mildew and Flaking or Chalking, Standards: OSHA Standard, For Sealing, Protecting and Decorating  Walls Rust-Oleum Magnetic Primer, Series: Specialty, 1 qt, Oil Base, Modified Alkyd Resin, Liquid, Solvent Like Odor/Scent, 39 - 48 sq-ft/qt Coverage, 30 Min To Touch, 1 hr To Handle, 30 Min To Recoat Drying Time, Application Method: Foam Roller, > 200 Deg F Flash Point, < 420 g/l VOC, > 120 Deg F, For Interior Use
Weiman 5092 Stone Spray-N-Seal Penetrating Sealer PRIMER LATEX INT ZERO VOC GAL Zinsser Gardz Problem Surface Sealer
Weiman Stone Surface Sealer, Series: Spray-N-Seal, 1 qt, Bottle Packing, Liquid, Fragrance Free Odor/Scent, Media: Stone Countertops Floors, Walls, Vanities and Grout, Application Method: Trigger Spray, Resists: Oil and Water-Based Stains, Standards: UL Listed, For Granite, Marble, Slate, Limestone, Sandstone, Flagstone, Concrete and Grout Valspar Latex Primer, Series: Professional, 1 Gal, Container, Vinyl Acrylic Resin, Liquid, White, Slight Odor/Scent, 300 - 400 sq-ft/Gal Coverage, 30 - 60 min Drying Time, Application Method: Airless Spray, Brush, Roller, 205 Deg F Flash Point, 50 - 90 Deg F, Standards: SCAQMD, CARB 2000 SCM, CARB 2007 SCM, OTC/LADCO, US National Regulatory Compliance, UL GreenGuard Gold, LEED (US), LEED (Canada), MPI 50, MPI 50 X-Green, MPI 149, MPI 149 X-Green Certification Zinsser Problem Surface Sealer, Water Based, Series: Gardz, 1 gal Capacity, Can Packing, 53 g/l VOC, Liquid, Clear, Matte, 350 - 450 sq-ft/gal Coverage, Ammonia Odor/Scent, >200 deg F Flash Point, 1.012 Specific Gravity, Application Method: Brush, Roller, Spray, 50 - 90 deg F, Resists: Water, 5-Chloro-2-Methyl-4-Isothiazolin-3-One, Plaster
Masterchem Industries High Build Sealer Primer Wolman Coppercoat Woodlife Wood Preservative Cabot 1000 Waterproofing Sealer
Masterchem Industries Sealer Primer, Series: High Build, 1 gal, Water Base, Liquid, White, Slight Odor/Scent, 400 sq-ft Coverage, 1 hr Drying Time, Application Method: Brush, Roller and Spray, 25 g/L VOC, 7 - 10 pH, 50 - 90 deg F, SCAQMD, CARB, OTC, LADCO, AIM, Leed Certified, For Interior Applications Wolman Wood Preservative, Water Based, Series: Coppercoat, Woodlife, 1 gal Capacity, Container Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Green, Faint Amine Odor/Scent, Composition: Monoethanolamine, Copper Naphthenate, 1.04 - 1.07 Specific Gravity, >200 deg F Flash Point, <350 g/l VOC, 10.1 - 10.9 pH, 50 - 90 deg F, Fence Posts, Poles Cabot Waterproofing Sealer, Series: 1000, 1 gal Capacity, <100 g/l VOC, 8 - 13 sec: (NO 4 Ford Cup) Viscosity, Liquid, Crystal Clear, 100 - 250 sq-ft/gal Coverage, 1 hr Touch Drying Time, 205 deg F Flash Point, Flammability Rating: 0, 1 Specific Gravity, >40 deg F Application, Applicable Materials: Wood, Concrete, Brick?, Stone and Unglazed Tile
Zinsser 5001 Watertite Waterproofing Paint Damtite M135 Sunny Dry Masonry Waterproofer Wolman RainCoat Oil Based Water Repellent Preservative
Zinsser Waterproofing Paint, Series: Watertite, Liquid, White, Smooth, 1 gal Capacity, Pigment: Titanium Dioxide, Oil Thinners, 770 sq-ft/gal Theoretical, 75 sq-ft/gal First Coat, 100 sq-ft/gal Second Coat Practical Coverage, 7 - 14 days Curing Time, 106 deg F Flash Point, <400 g/l VOC, Mild Odor/Scent, Resists: Water, Mold and Mildew Damtite Mansory Powder, Heavy Duty, 35 lb, Powder, White, 255 sq-ft Coverage, Cement Base, For Interior Applications Wolman Water Repellent Preservative, Oil Based, Series: RainCoat, 1 gal Capacity, Container Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Clear, Solvent Like Odor/Scent, Composition: Hydrotreated Light Distillate, Octamethylcyclotetrasiloxane, Stoddard Solvent, Solvent Naphtha, Light Aromatic, 0.899 Specific Gravity, 104 deg F Flash Point
Damtite 03550 Masonry Waterproofer Henry PR1760074 Premier Foundation Coating Henry RC065070 Roofers Choice Foundation Coating
Damtite Powder Waterproofer, Ready-Mix, Tintable, 1 gal, Pail, 8.3 - 8.6 pH, Liquid, White, 125 sq-ft Coverage, 12 - 24 hr Drying Time, Ammonia Odor/Scent, >212 Deg F Closed Cup Flash Point, Flammability Rating: 0, 1.56 Specific Gravity, 50 Deg F Application, Applicable Materials: Concrete Block, Cinder-Block, Poured Concrete, Masonry Stucco, Brick, Application Method: Nylon Bristle Brush or Roller, Latex Base, 25 psi, Resists: Alkali, For Providing Excellent Waterproofing Protection Henry Foundation Coating, Premium, 5 gal Roofers Choice Foundation Coating, Series: RC065, Non-Fibered, 4.75 gal, 500 g/l VOC, Liquid, Black, 1 - 2 gal/sq-ft Coverage, 24 hr Drying Time, Strong Petroleum Solvent Odor/Scent, 105 Deg F Flash Point, Media: Foam, Carbon Dioxide, Dry Chemical, Water Fog, Spray (Water), Sand and Earth, Composition: Petroleum Asphalt, Flammability Rating: 2, 0.91 Specific Gravity, Applicable Materials: Concrete, Cinder-Block, Brick and Metal Surfaces, Application Method: Spray or Brush, Resists: Weather, Standards: ASTM D-41, Type I, For Exterior Underground Foundation Coating and Damp proofer
Gardner-Gibson 0125-GA Roof And Foundation Coating United Gilsonite 22113 Masonry Waterproofer Rust-Oleum 239417 Natural Concrete Sealer
Gardner Foundation and Roof Coating, Non-Fibered, 4.75 gal, Pail, < 300 g/l VOC, 1800 Ps Viscosity, Liquid, Black, 70 sq-ft/gal Coverage, 24 hr Drying Time, 7 - 14 Days Functional Cure, Mild Hydrocarbon Odor/Scent, 105 Deg F Flash Point, Media: Large Fires : Water Spray, Fog or Regular Foam,  Small Fires: Dry Chemical, Carbon Dioxide, Water Spray or Regular Foam, Composition: Asphalt, Mineral Spirits, 1,2,4?Trimethylbenzene, Bentonite, Benzene, 1,3,5?Trimethyl, Water, 1.0186 Specific Gravity, 50 - 120 Deg F Application, Asphalt Base, >100 Deg F, Standards: OSHA(HCS2012), WHMIS, GHS, For Asphalt Based Roof and Foundation Coating United Gilsonite Masonry Waterproofer, Series: 22113, 1 gal Capacity, <100 g/l VOC, 120 - 125 KU Viscosity, Clear, High-Gloss, 90 - 100 sq-ft/gal Coverage, 2 hr Touch/Recoat Drying Time, Composition: Water, Diethylene Glycol Dibenzoate, 1.02 Specific Gravity, 50 deg F Application, Applicable Materials: Nylon, Application Method: Spray, Brush, Stone Rust-Oleum Natural Concrete Sealer, 1 gal Capacity, 36 g/l VOC, Liquid, Clear, Matte, 205 sq-ft/gal Theoretical, 250 - 400 sq-ft/gal for Smooth and Bare Concrete, 170 - 250 sq-ft/gal Rough and Porous Concrete Practical Coverage, 1 hr Touch Drying Time, 24 hr Light, 72 hr Heavy Traffic, Mild Ammonia Odor/Scent, >200 deg F Flash Point, Curing Method
Wolman Creocoat Woodlife Wood Preservative Zinsser 02025 Bulls Eye 1-2-3 Primer/Sealer Rustoleum 286258 Bulls Eye ? 123 Plus Primer/Sealer
Wolman Wood Preservative, Water Based, Series: Creocoat, Woodlife, 1 gal Capacity, Brush, Roller, Pump Sprayer Dispenser, Liquid, Black, Faint Amine Odor/Scent, Composition: Monoethanolamine, Copper Naphthenate, 1.04 - 1.07 Specific Gravity, >200 deg F Flash Point, <320 g/l VOC, 10.1 - 10.9 pH, 50 - 90 deg F, EPA Registered, NIOSH Approved, Roofs Zinsser Primer Sealer, Series: Bulls Eye 1-2-3, 2.5 gal, Water Base, Styrenated Acrylic Resin, White, 450 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.26 Specific Gravity, >200 deg F Flash Point, <100 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Brush, Roller, Sprayer, For Interior/Exterior Use Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 1 qt, Container, Water Base, Styrene Acrylic Copolymer Resin, Liquid, Gray, Flat/Matte, Solvent Like Odor/Scent, 400 - 450 sq-ft/Gal Coverage, 30 min Drying Time, Application Method: Brush, Roll, Spray, 94 Deg C Flash Point, 82 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces
Majic 8-1091 Barricade Primer and Paint Damtite 02501 Waterproof Coating Rustoleum 285085 Bulls Eye ? 123 Plus Primer/Sealer
Majic Barricade Primer and Paint, Series: 8-1091, Liquid, White, Flat, 5 gal Capacity, Can Packing, Vinyl Acrylic Latex Resin, Water Base, 300 sq-ft/gal Coverage, 50 deg F, >200 deg F Flash Point, 100 g/l VOC, 9.2 pH, 1.2196 Specific Gravity, Typical Latex Odor/Scent, Application Method: Brush, Roller, For Drywall Damtite Waterproofer Coating, Heavy Duty, 50 lb, Powder, Gray, 350 sq-ft Coverage, 20 - 30 min Application, Applicable Materials: Concrete, Masonry, Brick, Stone and Stucco, Portland Cement Base, Resists: Mold/Mildew and Flaking/Chalking, For Sealing, Protecting and Decorating Walls Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 1 Gal, Container, Water Base, Styrene Acrylic Copolymer Resin, Liquid, Gray, Flat/Matte, Solvent Like Odor/Scent, 400 - 450 sq-ft/Gal Coverage, 30 min Drying Time, Application Method: Brush, Roll, Spray, 94 Deg C Flash Point, 84 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces
Henry PR175070 Premier Foundation Coating Damtite 01211 Waterproofer Powder Damtite 01501 Waterproof Coating
Henry, Premier Foundation Coating, Non-Fibered, 5 gal, 250 g/l VOC, Fluid, Black, 1.5 - 2 gal/100 sq-ft Coverage, Strong Petroleum Solvent Odor/Scent, 105 Deg F Flash Point, Media: Foam, Carbon Dioxide, Dry Chemical, Water Fog, Spray (Water), Sand and Earth, Composition: Petroleum Asphalt, 0.93 Specific Gravity, For Damp Proofing Above and Below GRADE, Exterior Concrete and Masonry Walls and Foundations Damtite Powder Waterproofer, Heavy Duty, 21 lb, Pail, 12 pH, Powder, White, 280 sq-ft Coverage, 24 - 48 hr Drying Time, 15 Min Setting, Earthy Odor/Scent, Media: Dry Chemical, Foam, Carbon Dioxide, Water Spray, Composition: Crystalline Silica, Titanium Dioxide, Flammability Rating: 0, 1.26 Specific Gravity, >50 Deg F Application, Applicable Materials: Concrete Block, Cinder-Block, Poured Concrete, Fieldstone, Masonry, Brick and Stucco, Application Method: Nylon Paint Brush or Roller, Portland Cement Base, Mixing Ratio: 2:1, Paint Stirrer or Attachment To Electric Drill Mixing, 3 Mixing Steps, 22 psi, Resists: Mold or Mildew and Flaking or Chalking, Standards: OSHA Standard, For Sealing, Protecting and Decorating  Walls Damtite Waterproofer Masonry Coating, Heavy Duty, 50 lb, Powder, White, 350 sq-ft Coverage, 20 - 30 min Application, Applicable Materials: Concrete, Masonry, Brick, Stone and Stucco, Portland Cement Base, Resists: Mold/Mildew and Flaking/Chalking, For Sealing, Protecting and Decorating Walls
Drylok 27613 Latex Based Masonry Waterproofer Henry PR175042 Premier Foundation Coating Drylok 27513 Ready-To-Use Concrete Sealer
Drylok Masonry Waterproofer, Latex Based, Series: 27613, Gray, 1 gal Capacity, Container Packing, 120 - 130 KU Viscosity, 75 - 100 sq-ft/gal Coverage, <50 deg F, 100 g/l VOC, 9.5 - 9.9 pH, 1.5 Specific Gravity, Typical Amine Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Spray, Resists: Hydrostatic Pressure and Wind Driven Rain Henry, Premier Foundation Coating, Non-Fibered, 0.9 gal, 250 g/l VOC, Fluid, Black, 1.5 - 2 gal/100 sq-ft Coverage, Strong Petroleum Solvent Odor/Scent, 105 Deg F Flash Point, Media: Foam, Carbon Dioxide, Dry Chemical, Water Fog, Spray (Water), Sand and Earth, Composition: Petroleum Asphalt, Flammability Rating: 2, 0.93 Specific Gravity, For Damp Proofing Above and Below GRADE, Exterior Concrete and Masonry Walls and Foundations Drylok Concrete Sealer, Ready-To-Use, Drylok, 1 gal Capacity, 100 g/l VOC, Liquid, White, 100 sq-ft Coverage, 3 hr Drying Time, Amine Odor/Scent, 1.5 Specific Gravity, Latex Base
Zinsser 249937 Bulls Eye - 123 Plus Primer/Sealer Drylok 27514 Latex Based Masonry Waterproofer Zinsser 249020 Bulls Eye Zero Primer/Sealer
Zinsser Primer Sealer, Series: Bulls Eye 1-2-3 Plus, 1 gal, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Drylok Masonry Waterproofer, Latex Based, Series: 27514, White, 2 gal Capacity, Container Packing, 120 - 130 KU Viscosity, 75 - 100 sq-ft/gal Coverage, <50 deg F, 100 g/l VOC, 9.5 - 9.9 pH, 1.5 Specific Gravity, Typical Amine Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Spray, Resists: Hydrostatic Pressure and Wind Driven Rain Zinsser Primer Sealer, Series: Bulls Eye Zero, 1 gal, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 - 45 min to Touch, 1 hr to Recoat Drying Time, 1.273 Specific Gravity, >200 deg F Flash Point, 0 VOC, 50 - 85 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer
Rustoleum 276087 Primer WaterSeal 24111 Multi-Surface Waterproofer Zinsser 249729 Smart Prime Primer/Sealer
Zinsser Mold Killing Primer, 1 qt, Water Base, Styrene Acrylic Resin, Liquid, White, Solvent Like Odor/Scent, 624 sq-ft/gal Theoretical Coverage, 400 - 450 sq-ft/gal Practical Coverage Coverage, 30 Min To Touch, 1 hr To Handle, 1 hr To Recoat, 7 Days To Cure Completely Drying Time, Application Method: Brush, Roller, Spray, > 200 Deg F Flash Point, 1 g/l VOC, 40 - 80 Deg F, Suitable For Use With: All Existing Mold, Mildew, Moss, Fungi, Odor Causing Bacteria and Any Other Fungal Organisms, Used On Non-Porous Interior and Exterior, Residential, Commercial and Industrial Applications and Can Be Applied In Factories, Warehouses, Storage Facilities, Refrigerated Storage Facilities, Office Buildings, Residential Living, Schools, Hospitals, Veterinary Care Facilities, Elderly Care Facilities, Prisons and Correction Facilities, Wash Houses, Restaurants, Fitness Centers and Locker Rooms, Attics, Basements, Window Frames, Bathrooms, Wall Cavities, Base-Boards, Sub-Floors and Table Tops WaterSeal Multi-Surface Waterproofer, 1.2 gal Capacity, 2.99 lb/gal VOC, Clear, 24 hr Drying Time, 48 hr Application, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, Composition: Med. Aliphatic Hydrocarbon Solvent, 0.97 Specific Gravity, 40 deg F Application, Applicable Materials: Wood, Concrete and Brick, Curing Method, Mixing Ratio, Resists Zinsser Primer Sealer, Series: Smart Prime, 1 gal, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer, For Interior/Exterior Use
Zinsser 01501 Drywall Primer PRIMER SEALER WATER BS VOC GA Prep-Step 44-981 Exterior Primer
Zinsser Primer Sealer, 1 gal, Water Base, Acrylic Resin, Liquid, White, Solvent Like Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.244 Specific Gravity, >200 deg F Flash Point, 96 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Zinsser Primer Sealer, Series: Cover-Stain, 1 gal, Water Base, Modified Alkyd Polymer Solution Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.339 Specific Gravity, >200 deg F Flash Point, 28 g/l VOC, 40 - 90 deg F, Suitable For Use With: Brush, Roller, Pad or Sprayer Prep-Step Primer, Exterior, Series: 44-981, 1 qt Capacity, Pail Packing, Latex Base, Acrylic Resin, Liquid, White, 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 1.27 Specific Gravity, 205 deg F Flash Point, <50 g/l VOC, 50 - 90 deg F, LEED Certified, CARB 2000 SCM, 94 - 102 Krebs Units, For Bare Wood
Zinsser 00908 B-I-N Primer/Sealer Rustoleum Cover-Stain High Hide Stain Blocking Primer Drylok 28613 Latex Based Masonry Waterproofer
Zinsser Primer Sealer, Series: B-I-N, 1 pt, Shellac Resin, Liquid, White, Mild Odor/Scent, 565 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 500 sq-ft/Gal Practical Coverage At Recommended DFT Coverage, 20 min to Touch, 45 min to Recoat, 1-3 Days to Full Cure Drying Time, Application Method: Brush, Roller, Spray, 54 Deg F Flash Point, 584 g/l VOC, 0 - 90 Deg F, Suitable For Use With: Water, Grease, Rust, Smoke, Asphalt, Graffiti and Many Other Types Of Stain, For Interior Applications Rustoleum Stain Blocking Primer, High Hide, Series: Cover-Stain, 1 gal Capacity, Pail Packing, Low VOC Modified Alkyd Base Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 400 sq-ft Coverage, 30 min Drying Time, Application Method: Brush, Roller, Pad, Sprayer, 1.248 Specific Gravity, >200 deg F Flash Point, 100 g/l VOC, 40 - 90 deg F, Walls, Trim Drylok Masonry Waterproofer, Latex Based, Series: 28613, White, 1 gal Capacity, Container Packing, 110 - 120 KU Viscosity, 75 - 100 sq-ft/gal Coverage, <50 deg F, <100 g/l VOC, 9 - 9.9 pH, 1.260 Specific Gravity, Typical Amine Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Spray, ASTM C92, Type S, Grade NS, Class 25, Basement Walls
Rustoleum Cover-Stain Interior/Exterior Primer Masterchem Industries 57000 Sealer Primer Rustoleum 276049 Primer
Rustoleum Primer, Interior/Exterior, Series: Cover-Stain, 3 gal Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 400 - 500 sq-ft/gal Coverage, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 83 deg F Flash Point, 450 g/l VOC, 40 - 80 deg F, For Wood, Masonry Masterchem Industries Sealer Primer, General Purpose, 5 gal, Water Base, Liquid, White, Slight Odor/Scent, 400 sq-ft Coverage, 1 hr Drying Time, Application Method: Brush, Roller and Spray, 95 g/L VOC, 7 - 10 pH, 50 - 90 deg F, SCAQMD, CARB, OTC, LADCO, AIM, Leed Certified, For Interior Applications Zinsser Mold Killing Primer, 1 gal, Water Base, Styrene Acrylic Resin, Liquid, White, Mild Odor/Scent, 624 sq-ft/gal Theoretical Coverage, 400 - 450 sq-ft/gal Practical Coverage Coverage, 30 Min To Touch, 1 hr To Handle, 1 hr To Recoat, 7 Days To Cure Completely Drying Time, Application Method: Brush, Roller, Spray, > 200 Deg F Flash Point, 1 g/l VOC, 40 - 80 Deg F, Suitable For Use With: All Existing Mold, Mildew, Moss, Fungi, Odor Causing Bacteria and Any Other Fungal Organisms, Used On Non-Porous Interior and Exterior, Residential, Commercial and Industrial Applications and Can Be Applied In Factories, Warehouses, Storage Facilities, Refrigerated Storage Facilities, Office Buildings, Residential Living, Schools, Hospitals, Veterinary Care Facilities, Elderly Care Facilities, Prisons and Correction Facilities, Wash Houses, Restaurants, Fitness Centers and Locker Rooms, Attics, Basements, Window Frames, Bathrooms, Wall Cavities, Base-Boards, Sub-Floors and Table Tops
Majic Paints 8-0165-1 Waterproofing Sealer Masterchem Industries 57001 Sealer Primer Valspar 7276 Multi-Surface Waterproofing Sealer
Majic Paints Waterproofing Sealer, 1 gal Capacity, Can Packing, Water Solvent Base, Acrylic Resin, Clear, Matte, 75 - 150 sq-ft/gal Coverage, 24 hr Drying Time, Application Method: Brush, Roller or Sprayer, >200 deg F Flash Point, 250 g/l VOC Masterchem Industries Sealer Primer, General Purpose, 1 gal, Water Base, Liquid, White, Slight Odor/Scent, 400 sq-ft Coverage, 1 hr Drying Time, Application Method: Brush, Roller and Spray, 95 g/L VOC, 7 - 10 pH, 50 - 90 deg F, SCAQMD, CARB, OTC, LADCO, AIM, Leed Certified, For Interior Applications Valspar Waterproofing Sealer, Multi-Surface, 1 gal Capacity, Pail Packing, Liquid, Clear, Slight Odor/Scent, 1 Specific Gravity, 205 deg F Flash Point, OSHA 29 CFR 1910.1200, For Exterior Application
WaterSeal 24106 Multi-Surface Waterproofer Zinsser 01500 Drywall Primer Majic Paints 8-0165-5 Waterproofing Sealer
WaterSeal Multi-Surface Waterproofer, 6 gal Capacity, Can Packing, 2.99 lb/gal VOC, Clear, 24 hr Drying Time, 48 hr Application, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, Composition: Med. Aliphatic Hydrocarbon Solvent, 0.97 Specific Gravity, 40 deg F Application, Applicable Materials: Wood, Concrete and Brick, Curing Method, Resists Zinsser Primer Sealer, 5 gal, Water Base, Acrylic Resin, Liquid, White, Solvent Like Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.244 Specific Gravity, >200 deg F Flash Point, 96 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Majic Paints Waterproofing Sealer, 5 gal Capacity, Can Packing, Water Solvent Base, Acrylic Resin, Clear, Matte, 75 - 150 sq-ft/gal Coverage, 24 hr Drying Time, Application Method: Brush, Roller or Sprayer, >200 deg F Flash Point, 250 g/l VOC
Kilz Original Interior Primer Sealer Stain Blocker Rain-X GRWN200 Wood Sealer Drylok 20713 Oil Based Masonry Waterproofer
Kilz Primer Sealer Stain Blocker, Interior, Series: Original, 1 gal Capacity, Oil Base, Alkyd Resin, Liquid, White, Smoke Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 75 deg F Flash Point, 443 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces Rain-X Wood Sealer, 1 gal Capacity, Container Packing, Pump-Up Sprayer, Synthetic Paint Brush, Paint Roller or Deck Pad Dispenser, Liquid, Natural, 0.9943 - 1.001 Specific Gravity, 89.02 % VOC, 9.5 pH, >50 deg F, Applicable Materials: Wood and Plywood, NIOSH Approved, For Deck, Furniture and Fences Drylok Masonry Waterproofer, Oil Based, Series: 20713, White, 1 gal Capacity, Container Packing, 100 - 104 KU Viscosity, 75 - 100 sq-ft/gal Coverage, <50 deg F, 104 deg F Flash Point, 400 g/l VOC, 1.6 Specific Gravity, Typical Aromatic Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Spray, ASTM C92, Type S, Grade NS, Class 25
Drylok 20813 Masonry Waterproofing Paint PRIMER SEALER STAIN OIL 1-GAL Cabot 8065 Quick Dry Sanding Sealer
Drylok Masonry Waterproofing Paint, Liquid, Gray, Flat, 1 gal Capacity, 100 - 104 KU Viscosity, Oil Thinners, 100 sq-ft/gal Smooth Surfaces, 75 sq-ft/gal Rough Surfaces Coverage, 104 deg F Flash Point, 400 g/l VOC, Aromatic Odor/Scent, Application Method: Nylon Bristle or Fiber Brush, ASTM Certified, TT-C-555B, Federal Specification TT-P-1411A Zinsser Primer/Sealer Stain Oil, Series: Cover Stain, Classic, 1 Gal, Container, Oil Base, Low-VOC Modified Alkyd Resin, Liquid, White, Solvent Like Odor/Scent, 1062 sq-ft/Gal Coverage, 2 hr Drying Time, Application Method: Surface Preparation, Priming, Mixing, Stain Blocking, Sealing, 39 Deg C Flash Point, 102 g/l VOC, 40 - 90 Deg F, Suitable For Use With: Any Topcoat Cabot Sanding Sealer, Quick Dry, Series: 8065, 1 gal Capacity, 550 g/l VOC, 50 - 150 cP Viscosity, Liquid, Clear, Satin, 100 - 125 sq-ft Coverage, 15 - 30 min Drying Time, 61 deg F Flash Point, Composition: Naphtha, Zinc Stearate, Ethylbenzene, Flammability Rating: 3, 0.860 Specific Gravity, 50 - 90 deg F Application, 50 - 90 deg F, For Interior
Waterseal TH.041811-16 Transparent Waterproofing Stain Waterseal TH.041841-16 Transparent Waterproofing Stain Waterseal TH.041851-16 Transparent Waterproofing Stain
Waterseal Waterproofing Stain, Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Harvest Gold, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Acorn Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Woodland Cedar, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood
Kilz 20041 Primer Rustoleum Cover-Stain Interior/Exterior Primer Sealer Rustoleum 249332 Automotive Primer Surfacers
Kilz Premium Premium Primer, Kilz Premium, 1 gal Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Rustoleum Primer Sealer, Interior/Exterior, Series: Cover-Stain, 1 gal Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 23 deg C Flash Point, 425 g/l VOC, 40 - 80 deg F, MPI No 5 Certified, For Cedar and Redwood Rust-Oleum Primer Surfacer, Automotive, 1 gal, Oil Base, Alkyd Modified Acrylic Resin, Liquid, Light Gray, Solvent Like Odor/Scent, 652 sq-ft/gal Theoretical Coverage, 40 - 50 sq-ft/qt Practical Coverage Coverage, 10 - 15 Min To Touch, 20 Min To Handle Drying Time, Application Method: Spray, 35 Deg F Flash Point, 516 g/l VOC, > 120 Deg F, For Exterior Applications
Rustoleum Bulls Eye Interior Primer Sealer Valspar 7276 Multi-Surface Waterproofing Sealer Kilz Original Interior Low VOC Primer Sealer
Rustoleum Primer Sealer, Interior, Series: Bulls Eye, 1 gal Capacity, Oil Base, Modified Alkyd Resin, Liquid, White, Flat, Mild Odor/Scent, 400 sq-ft Coverage, 40 min Drying Time, 1.583 Specific Gravity, 104 deg F Flash Point, 328 g/l VOC, 40 - 90 deg F, MPI No 61 Certified, For Walls and Trim Valspar Waterproofing Sealer, Multi-Surface, 5 gal Capacity, Pail Packing, Liquid, Clear, Slight Odor/Scent, 1 Specific Gravity, 205 deg F Flash Point, OSHA 29 CFR 1910.1200, For Exterior Application Kilz Primer Sealer, Interior Low VOC, Series: Original, 1 gal Capacity, Oil Base, Alkyd Resin, Liquid, Clear, Smoke Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 344 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall
MOISTURE STOP 1 GALLON        Damtite 02451 Waterproofer Powder WaterSeal 21806 Waterproof Wood Protector
MOISTURE STOP 1 GALLON
Our Price: $75.56
For use on concrete prior to coating. Penetrates into concrete and reacts with the free calcium and water to form a gel in cracks, pores and capillaries to protect against the ingress of water and contaminants. This allows surfaces that were previously uncoatable, due to moisture, to be coated. Strengthens and seals from the inside out. Damtite Powder Waterproofer, Heavy Duty, 45 lb, Pail, 12 pH, Powder, Gray, 600 sq-ft Coverage, 24 - 48 hr Drying Time, 15 Min Setting, Earthy Odor/Scent, Media: Dry Chemical, Foam, Carbon Dioxide, Water Spray, Composition: Crystalline Silica, Titanium Dioxide, Flammability Rating: 0, 1.26 Specific Gravity, >50 Deg F Application, Applicable Materials: Concrete Block, Cinder-Block, Poured Concrete, Fieldstone, Masonry, Brick and Stucco, Application Method: Nylon Paint Brush or Roller, Portland Cement Base, Mixing Ratio: 2:1, Paint Stirrer or Attachment To Electric Drill Mixing, 3 Mixing Steps, 22 psi, Resists: Mold or Mildew and Flaking or Chalking, Standards: OSHA Standard, For Sealing, Protecting and Decorating  Walls WaterSeal Wood Protector, Waterproof, 6 gal Capacity, Container Packing, Paint Pad, Brush, Sprayer, Roller Dispenser, Viscosity Liquid, Clear, Mineral Spirit Odor/Scent, Composition: Paraffin Oil, 0.86 Specific Gravity, 175 deg F Flash Point, 4 % VOC, >5 deg C, Applicable Materials: Wood, Brick, Concrete, Clay/Quarry Tile and Weatherboard, Fences
Kilz Original Interior Primer Sealer Stain Blocker Waterseal TH.041821-16 Transparent Waterproofing Stain Waterseal TH.041831-16 Transparent Waterproofing Stain
Kilz Primer Sealer Stain Blocker, Interior, Series: Original, 5 gal Capacity, Oil Base, Alkyd Resin, Liquid, White, Smoke Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 75 deg F Flash Point, 443 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces Waterseal Waterproofing Stain, Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Maple Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Sequoia Red, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood
Rain-X GRWC210 Wood Sealer WaterSeal 21801/21802 Waterproof Wood Sealer Zinsser Bulls Eye SealCoat Sanding Sealer
Rain-X Wood Sealer, 1 gal Capacity, Container Packing, Pump-Up Sprayer, Synthetic Paint Brush, Paint Roller or Deck Pad Dispenser, Liquid, Cedar, 0.9943 - 1.001 Specific Gravity, 89.02 % VOC, 9.5 pH, >50 deg F, Applicable Materials: Wood and Plywood, NIOSH Approved, For Deck, Furniture and Fences WaterSeal Wood Sealer, Waterproof, 1 gal Capacity, Container Packing, Paint Pad, Brush, Sprayer, Roller Dispenser, Viscosity Liquid, Clear, Mineral Spirit Odor/Scent, Composition: Paraffin Oil, 0.86 Specific Gravity, 175 deg F Flash Point, 4 % VOC, >5 deg C, Applicable Materials: Wood, Brick, Concrete, Clay/Quarry Tile and Weatherboard, Fences Zinsser Sanding Sealer, Universal, Series: Bulls Eye SealCoat, 1 gal Capacity, 653 g/l VOC, 15 cP Viscosity, 5.2 - 5.5 pH, Liquid, Amber, 400 - 600 sq-ft/gal Coverage, 5 - 10 min Touch, 20 - 45 min Recoat Drying Time, Alcohol Odor/Scent, 55 deg F Flash Point, Composition: Ethyl Alcohol, Isopropyl Alcohol, Methyl Isobutyl Ketone
Rustoleum 270976 B-I-N - Advanced Primer/Sealer Kilz Original Interior Low VOC Primer Sealer Masterchem Industries 20000 2-Latex Sealer Primer
Zinsser Primer Sealer, Series: B-I-N Advanced, Synthetic Shellac, 1 gal, Can Packing, Water Base, Acrylic Resin, Liquid, White, Solvent Like Odor/Scent, 25 min to Touch, 45 min to Recoat Drying Time, 1.296 Specific Gravity, 94 deg C Flash Point, 96 g/l VOC, 50 - 90 deg F, For Interior/Exterior Use Kilz Primer Sealer, Interior Low VOC, Series: Original, 5 gal Capacity, Oil Base, Alkyd Resin, Liquid, Clear, Smoke Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 344 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Masterchem Industries Sealer Primer, Series: 2, Latex, 5 gal, Water Base, Liquid, White, Slight Odor/Scent, 400 sq-ft Coverage, 1 hr Drying Time, Application Method: Brush, Roller and Spray, 96 g/L VOC, 7 - 10 pH, 50 - 90 deg F, SCAQMD, CARB, OTC, LADCO, AIM, Leed Certified, For Interior and Exterior Applications
Rustoleum Cover-Stain High Hide Primer Sealer Zinsser 02001 Bulls Eye 1-2-3 Primer/Sealer Kilz 13041 Primer
Rustoleum Primer Sealer, High Hide, Series: Cover-Stain, 1 gal Capacity, Oil Base, VT Modified Alkyd Resin, Liquid, White, Flat/Matte, Solvent Odor/Scent, 300 - 400 sq-ft Coverage, 35 min Drying Time, Application Method: Spray, Roller or Brush, 1.491 Specific Gravity, 105 deg F Flash Point, 332 g/l VOC, 40 - 90 deg F, MPI No 5 Certified Zinsser Primer Sealer, Series: Bulls-Eye 1-2-3, 1 Gal, Water Base, Styrenated Acrylic Resin, Liquid, White Emulsion, Acrylic Like Odor/Scent, 545 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 450 sq-ft/Gal Non-Porous and 350 sq-ft/Gal Porous Surfaces For Practical Coverage At Recommended DFT Coverage, 35 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Natural or Synthetic Bristle Brush, Roller, Pad or Sprayer, 1.26 Specific Gravity, >200 Deg F Flash Point, <100 g/l VOC, 9 - 10 pH, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications Kilz Premium Premium Primer, Kilz Premium, 1 gal Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F
Damtite 01451 Waterproofer Powder Zinsser 60001 Peel Stop Primer/Sealer Zinsser 02000 Bulls Eye 1-2-3 Primer/Sealer
Damtite Powder Waterproofer, Heavy Duty, 45 lb, Pail, 12 pH, Powder, White, 600 sq-ft Coverage, 24 - 48 hr Drying Time, 15 Min Setting, Earthy Odor/Scent, Media: Dry Chemical, Foam, Carbon Dioxide, Water Spray, Composition: Crystalline Silica, Titanium Dioxide, Flammability Rating: 0, 1.26 Specific Gravity, >50 Deg F Application, Applicable Materials: Concrete Block, Cinder-Block, Poured Concrete, Fieldstone, Masonry, Brick and Stucco, Application Method: Nylon Paint Brush or Roller, Portland Cement Base, Mixing Ratio: 2:1, Paint Stirrer or Attachment To Electric Drill Mixing, 3 Mixing Steps, 22 psi, Resists: Mold or Mildew and Flaking or Chalking, Standards: OSHA Standard, For Sealing, Protecting and Decorating  Walls Zinsser Primer Sealer, Series: Peel Stop, Clear Binding, 1 gal, Water Base, Vinyl Acrylic Copolymer Resin, Liquid, White, Mild Odor/Scent, 300 - 400 sq-ft Coverage, 30 to Touch, 2 hr to Recoat Drying Time, 1.049 Specific Gravity, >200 deg F Flash Point, 98 g/l VOC, 50 - 90 deg F, For Interior/Exterior Use Zinsser Primer Sealer, Series: Bulls Eye 1-2-3, 5 gal, Water Base, Styrenated Acrylic Resin, Liquid, White Emulsion, Acrylic Like Odor/Scent, 450 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.26 Specific Gravity, >200 deg F Flash Point, <100 g/l VOC, 9 - 10 pH, 50 - 90 deg F, Suitable For Use With: Synthetic Brush, Roller, Sprayer
Rustoleum 285090 Bulls Eye ? 123 Plus Primer/Sealer Zinsser 256261 Bondz Primer/Sealer Rustoleum Cover-Stain High Hide Primer Sealer
Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 5 Gal, Container, Water Base, Styrene Acrylic Copolymer Resin, Liquid, Gray, Flat/Matte, Solvent Like Odor/Scent, 400 - 450 sq-ft/Gal Coverage, 30 min Drying Time, Application Method: Brush, Roll, Spray, 94 Deg C Flash Point, 84 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces Zinsser Primer Sealer, Series: Bondz, Maximum Adhesion, 1 gal, Water Base, Acrylic Resin, Liquid, White, Solvent Like Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr (Most Paints)/6 hr (Epoxies) to Recoat Drying Time, 1.219 Specific Gravity, >200 deg F Flash Point, 81 g/l VOC, 36 - 90 deg F, For Interior/Exterior Use Rustoleum Primer Sealer, High Hide, Series: Cover-Stain, 5 gal Capacity, Oil Base, VT Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 300 - 400 sq-ft Coverage, 35 min Drying Time, Application Method: Spray, Roller or Brush, 1.49 Specific Gravity, 103 deg F Flash Point, 332 g/l VOC, 40 - 90 deg F, MPI No 5 Certified
Masterchem Industries Clean Start Sealer Primer Rustoleum Cover-Stain Interior/Exterior Primer Sealer Varathane 224740 Sanding Sealer
Masterchem Industries Sealer Primer, Series: Clean Start, 1 gal, Water Base, Liquid, White, Slight Odor/Scent, 400 sq-ft Coverage, 1 hr Drying Time, Application Method: Brush, Roller and Spray, 4 g/L VOC, 7 - 10 pH, 50 - 90 deg F, SCAQMD, CARB, OTC, LADCO, AIM, Leed Certified, For Interior and Exterior Applications Rustoleum Primer Sealer, Interior/Exterior, Series: Cover-Stain, 5 gal Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 83 deg F Flash Point, 425 g/l VOC, 40 - 80 deg F, MPI No 5 Certified, For Cedar and Redwood Varathane sanding sealer seals wood pores and provides a surface that can be easily sanded. It is suitable for use for all interior projects such as furniture, doors, cabinets and trim. It dries clear and provides the convenience of easy soap and water clean-up. Varathane sanding sealer is a universal sanding sealer that can be used under any wood finish including oil or water-based polyurethanes, as well as lacquer or shellac finishes, or it is suitable as a base finish coat. It is not recommended for linoleum, vinyl or lazed tile, or metal surfaces
WaterSeal TH.023111-03 Waterproofer Masonry Protector PRIMER SEALER 123 DEEP TINT GA Kilz Complete Interior/Exterior Low VOC Primer Sealer
WaterSeal Waterproofer Masonry Protector, 25 oz Capacity, Clear, 150 - 250 sq-ft/gal Pavers, 175 sq-ft/gal Brick, 50 sq-ft/gal Smooth Concrete Block, 250 sq-ft/gal Clay Tile and Quarry Tile, 250 sq-ft/gal Stucco, 375 sq-ft/gal Slate/Masonite Coverage, 24 hr Drying Time, 48 hr Application, 40 deg F Application, Applicable Materials: Masonry Surfaces Zinsser Primer Sealer, Series: Bulls Eye 1-2-3, Deep Tint, 1 gal, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 450 sq-ft Coverage, 35 min to Touch, 1 hr to Recoat Drying Time, 1.258 Specific Gravity, >200 deg F Flash Point, 65 g/l VOC, 50 - 90 deg F, Suitable For Use With: Natural or Synthetic Bristle Brush, Roller, Pad or Sprayer Kilz Primer Sealer, Interior/Exterior Low VOC, Series: Complete, 1 gal Capacity, Can Packing, Oil Base, Alkyd Resin, Liquid, White, Mild/Sweet Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 74 deg F Flash Point, 344 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Drywall Paneling
Masterchem Industries 13000 Sealer Primer Kilz Complete Interior/Exterior Low VOC Primer Sealer PRIMER ALKALI RESISTANT GAL
Masterchem Industries Sealer Primer, Premium, 5 gal, Water Base, Liquid, White, Slight Odor/Scent, 400 sq-ft Coverage, 1 hr Drying Time, Application Method: Brush, Roller and Spray, <5 g/L VOC, 8.5 - 9.5 pH, 50 - 90 deg F, SCAQMD, CARB, OTC, LADCO, AIM, Leed Certified, For Interior and Exterior Applications Kilz Primer Sealer, Interior/Exterior Low VOC, Series: Complete, 5 gal Capacity, Can Packing, Oil Base, Alkyd Resin, Liquid, White, Mild/Sweet Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 74 deg F Flash Point, 344 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Drywall Paneling Valspar Primer, 1 gal, Container, Acrylic Resin, Liquid, Slight Odor/Scent, 200 - 400 sq-ft/Gal Coverage, 30 - 60 min Drying Time, Application Method: Airless Spray, Brush, Roller, 205 Deg F Flash Point, < 50 g/l VOC, 6 - 13 pH, 50 - 90 Deg F, Standards: SCAQMD, CARB 2000 SCM, CARB 2007 SCM, OTC/LADCO, US National Regulatory Compliance, Water Thinning, Mildew Resistant
Green Products COPPER 1 Wood Preservative Kilz 10041 Interior Primer Sealer PRIMER LATEX INT ZERO VOC PAIL
Green Products Wood Preservative, Solvent Based, 1 gal Capacity, Can Packing, Brush Dispenser, Liquid, Brown, Unpleasant Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, Water damage, Wood rot Kilz Primer Sealer, Interior, Series: 10041, 1 gal Capacity, Oil Base, Acrylic Resin, Liquid, White, Odorless Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 331 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Paneling Valspar Latex Primer, Series: Professional, 1 Pail, Container, Vinyl Acrylic Resin, Liquid, White, Slight Odor/Scent, 300 - 400 sq-ft/Gal Coverage, 30 - 60 min Drying Time, Application Method: Airless Spray, Brush, Roller, 205 Deg F Flash Point, 50 - 90 Deg F, Suitable For Use With: Drywall, Plaster and Wallboard and Enamel Undercoater, Standards: SCAQMD, CARB 2000 SCM, CARB 2007 SCM, OTC/LADCO, US National Regulatory Compliance, UL GreenGuard Gold, LEED (US), LEED (Canada), MPI 50, MPI 50 X-Green, MPI 149, MPI 149 X-Green Certification
Zinsser 3951 Interior Stain Blocker SEALER WOOD CLEAR ONECOAT 1GAL Zinsser SealCoat Interior Sanding Sealer
Zinsser Stain Blocker, Interior, Series: 3951, 13 oz Capacity, Oil Base, Synthetic Alkyd Resin, Liquid, White, Solvent Odor/Scent, 350 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Natural or Synthetic Bristle Brush, Roller, or Airless Sprayer, 106 deg F Flash Point, 336 g/l VOC, 12.5 pH, 40 - 90 deg F, For Porous, Cement WOLMAN Wood Sealer, Series: RainCoat, 1 gal Capacity, Liquid, Clear, Mild Odor/Scent, Composition: 2,2,4-Trimethyl-1,3-Pentanediol Isobutyrate, 3-Iodo-2-Propynyl butylcarbamate, 94 Deg C Flash Point, 373 g/l VOC, 250 sq-ft Coverage Area, Used To Protect Decks, Porches, Fences, Shake, Shingle and Clapboard Siding, Boat Decks, Boardwalks, Outdoor Furniture, Gazebos, Arbors and Trellises and Storage Sheds Zinsser Interior Sanding Sealer, Universal Water Based, Series: SealCoat, 1 gal Capacity, Can Packing, 653 g/l VOC, Liquid, Crystal Clear, Matte, 300 sq-ft/gal Coverage, Alcohol Odor/Scent, 57 deg F Flash Point, 0.866 Specific Gravity, Application Method: Brush, Spray, Ethanol, Isopropyl Alcohol Additives, For Interior Floor
Green Products 33001 Oil Based Wood Preservative Homax 613 Wet Look Cure Seal SEALER WOOD NATURAL CEDAR 1GAL
Green Products Wood Preservative, Oil Based, 1 gal Capacity, Can Packing, Brush Dispenser, Liquid, Brown, Pungent Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, For Window Frames, Doors Homax Wet Look Cure Seal, Water Based, 1 gal, <100 g/l VOC, Viscous Liquid, Clear, High Gloss, 300 - 400 sq-ft Smooth Concrete, Brick, 150 - 250 sq-ft Exposed Aggregate, 150 - 250 sq-ft Rough Concrete, 400 - 500 sq-ft Slate, Terrazzo, 250 - 300 sq-ft Unglazed Tile, 100 - 125 sq-ft Flagstone, Saltillo Coverage, 2 hr Drying Time, Fishy Odor/Scent WOLMAN Wood Sealer, Series: RainCoat, 1 gal Capacity, Liquid, Natural Cedar, Mild Odor/Scent, Composition: Ethylene Glycol Monobutyl Ether, 2,2,4-Trimethyl-1,3-Pentanediol Isobutyrate, 3-Iodo-2-Propynyl butylcarbamate, 94 Deg C Flash Point, 349 g/l VOC, 250 sq-ft Coverage Area, Used To Protect Decks, Porches, Fences, Shake, Shingle and Clapboard Siding, Boat Decks, Boardwalks, Outdoor Furniture, Gazebos, Arbors and Trellises and Storage Sheds
SEALER WOOD NATURAL RED 1GAL  Waterseal TH.042811-16 Semi-Transparent Waterproofing Stain Waterseal TH.042821-16 Semi-Transparent Waterproofing Stain
WOLMAN Wood Sealer, Series: RainCoat, 5 gal Capacity, Liquid, Natural Redwood, Mild Odor/Scent, Composition: Ethylene Glycol Monobutyl Ether, 2,2,4-Trimethyl-1,3-Pentanediol Isobutyrate, 3-Iodo-2-Propynyl butylcarbamate, 94 Deg C Flash Point, 337 g/l VOC, 250 sq-ft Coverage Area, Used To Protect Decks, Porches, Fences, Shake, Shingle and Clapboard Siding, Boat Decks, Boardwalks, Outdoor Furniture, Gazebos, Arbors and Trellises and Storage Sheds Waterseal Waterproofing Stain, Semi-Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Harvest Gold, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, Semi-Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Maple Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood
Waterseal TH.042831-16 Semi-Transparent Waterproofing Stain Waterseal TH.042841-16 Semi-Transparent Waterproofing Stain Waterseal TH.042851-16 Semi-Transparent Waterproofing Stain
Waterseal Waterproofing Stain, Semi-Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Sequoia Red, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, Semi-Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Acorn Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, Semi-Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Woodland Cedar, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood
California 50600-1 Primer/Sealer Drylok 27515 Latex Based Masonry Waterproofer Rain-X GRYN300 Extended Waterproofer Wood Sealer
FixAll Universal Primer, Series: 50600, 1 Gal, Water Base, 100 % Acrylic Latex Resin, Viscous Liquid, White, Very Slight Odor/Scent, 300 - 350 sq-ft/Gal Smooth Surface, 175 - 225 sq-ft/Gal Porous Surface Coverage, 1/2 hr to Touch, 4 hr to Handle, 2 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, 8.5 pH, < 50 Deg F, Suitable For Use With: Wallboard  Plaster, Sheetrock, Masonry, Wood, Concrete, Galvanized Metal, Plastic Laminates, Vinyl Wall Coverings, Under Wall Coverings As Well As Previously Painted Surfaces, Standards: WHMIS Hazard Class Drylok Masonry Waterproofer, Latex Based, Series: 27515, White, 5 gal Capacity, Container Packing, 120 - 130 KU Viscosity, 75 - 100 sq-ft/gal Coverage, <50 deg F, 100 g/l VOC, 9.5 - 9.9 pH, 1.5 Specific Gravity, Typical Amine Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Spray, Resists: Hydrostatic Pressure and Wind Driven Rain Rain-X Wood Sealer, Extended, Waterproofer, 1 gal Capacity, Container Packing, Pump-Up Sprayer, Synthetic Paint Brush, Paint Roller or Deck Pad Dispenser, Liquid, Natural, 0.9946 - 1.006 Specific Gravity, 85.63 % VOC, 9.5 pH, >50 deg F, Applicable Materials: Wood and Plywood, NIOSH Approved, For Decks and Fences
Waterseal TH.043841-16 Waterproofing Stain Weiman 5134 Stone Spray-N-Seal Penetrating Sealer SEALER WOOD NATURAL CEDAR 5GAL
Waterseal Waterproofing Stain, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Solid Acorn Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood SCI Stone Surface Sealer, Series: Stone Spray-N-Seal, 16 oz, Bottle, 8.2 pH, Liquid, Clear, Solvent Odor/Scent, 138 Deg F Flash Point, Composition: 2-Butoxyethanol, Isopropyl Alcohol, Mixed Perfluoroalkylethyl Phosphate Salts, Flammability Rating: 3, Applicable Materials: Stone Countertops  Floors, Walls, Vanities and Even Grout, Standards: UL Classified For Slip Resistance, OSHA Hazard Communication Standard (CFR 29 1910.1200) HazCom 2012, For Masonry, Stucco, Concrete and Sanded Grout WOLMAN Wood Sealer, Series: RainCoat, 5 gal Capacity, Liquid, Natural Cedar, Mild Odor/Scent, Composition: Ethylene Glycol Monobutyl Ether, 2,2,4-Trimethyl-1,3-Pentanediol Isobutyrate, 3-Iodo-2-Propynyl butylcarbamate, 94 Deg C Flash Point, 349 g/l VOC, 250 sq-ft Coverage Area, Used To Protect Decks, Porches, Fences, Shake, Shingle and Clapboard Siding, Boat Decks, Boardwalks, Outdoor Furniture, Gazebos, Arbors and Trellises and Storage Sheds
Wolman Coppercoat Woodlife Wood Preservative Zinsser 249728 Smart Prime Primer/Sealer PRIMER SEALER WATER BS VOC 5G
Wolman Wood Preservative, Water Based, Series: Coppercoat, Woodlife, 5 gal Capacity, Container Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Green, Faint Amine Odor/Scent, Composition: Monoethanolamine, Copper Naphthenate, 1.04 - 1.07 Specific Gravity, >200 deg F Flash Point, <250 g/l VOC, 10.1 - 10.9 pH, 50 - 90 deg F, Fence Posts, Poles Zinsser Primer Sealer, Series: Smart Prime, 5 gal, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer, For Interior/Exterior Use Zinsser Primer Sealer, Series: Cover-Stain, 5 gal, Water Base, Modified Alkyd Polymer Solution Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.339 Specific Gravity, >200 deg F Flash Point, 28 g/l VOC, 8.5 - 9.5 pH, 40 - 90 deg F, Suitable For Use With: Brush, Roller, Pad or Sprayer
Prep-Step 44-981 Exterior Primer Valspar 82390 Wet Look Sealer Valspar 82092 Natural Look Waterproofer
Prep-Step Primer, Exterior, Series: 44-981, 1 gal Capacity, Pail Packing, Latex Base, Acrylic Resin, Liquid, White, 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 1.27 Specific Gravity, 205 deg F Flash Point, <50 g/l VOC, 50 - 90 deg F, LEED Certified, CARB 2000 SCM, 94 - 102 Krebs Units, For Bare Wood Waterproofs and enhances the color and design of concrete, brick, masonry, slate and pavers. Formulated to protect surfaces against the sun's UV rays and damaging weather. Resists gasoline, oil and de-icing salts. For use over semi-transparent stain or bare concrete. Forms a waterproofing seal on concrete, brick, masonry, aggregate, natural stone and pavers. Formulated to protect against the sun's UV rays, water, gasoline and de-icing salts. Protective sealer allows the natural look of the surface to come through.
Waterseal TH.043811-16 Waterproofing Stain Waterseal TH.043821-16 Waterproofing Stain Waterseal TH.043831-16 Waterproofing Stain
Waterseal Waterproofing Stain, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Solid Harvest Gold, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Solid Maple Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Solid Sequoia Red, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood
Waterseal TH.043851-16 Waterproofing Stain PRIMER KITCHEN/BATH GALLON    PRIMER ALKALI RESISTANT PAIL
Waterseal Waterproofing Stain, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Solid Woodland Cedar, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood For residential surfaces in high humidity, moisture and temperature environments such as kitchens, bathrooms, powder rooms and laundry rooms. Adhers to most surfaces and provides a sound anchor for paints. The enhanced mildew-resistant film helps protect the primer from mildew growth. Will block most stains including felt marker, grease, ink, pencil, tannin and water stains. It is a fast drying, low odor and low VOC formula. Valspar Primer, 1 Pail, Container, Acrylic Resin, Liquid, Slight Odor/Scent, 200 - 400 sq-ft/Gal Coverage, 30 - 60 min Drying Time, Application Method: Airless Spray, Brush, Roller, 205 Deg F Flash Point, < 50 g/l VOC, 6 - 13 pH, 50 - 90 Deg F, Standards: SCAQMD, CARB 2000 SCM, CARB 2007 SCM, OTC/LADCO, US National Regulatory Compliance, Water Thinning, Mildew Resistant
Flood/PPG FLD4-04 E-B Emulsa-Bond Bonding Primer Additive STAIN/SLR EXT WD REDWD CAN 1G STAIN/SLR EXT WD NAT CDR CN 1G
Penetrol Paint Additive, 1 Gal Capacity, Can, <550 g/l VOC, Liquid, Composition: Solvent Naphtha (Petroleum), Medium Aliph, Linseed Oil, Xylene, Ethylbenzene, Clear/Amber, Mild Solvent Odor/Scent, >125 Deg F Flash Point, Flammability Rating: 2, 0.86 Specific Gravity, Used in Oil or Alkyd-Based Paints, Varnishes and Primers A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods. A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods.
STAIN/SLR EXT WD LT OAK CAN 1G STAIN/SEALER EXT WOOD CLEAR 1G STAIN/SLR EXT WD GLD PN CAN 1G
A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods. A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods. A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods.
STAIN/SLR EXT WD MHGONY CAN 1G STAIN/SLR EXT WD DK WLNT CN 1G STAIN/SLR EXT WD PECAN CAN 1G
A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods. A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods. A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods.
STAIN/SLR EXT WD LIGHT OAK 5G STAIN/SLR EXT WD GOLDN PINE 5G STAIN/SLR EXT WD NAT CEDAR 5G
A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods. A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods. A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods.
STAIN/SLR EXT WD PECAN PAIL 5G STAIN/SLR EXT WD REDWD PAIL 5G STAIN/SLR EXT WD DK WLNT PL 5G
A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods. A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods. A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods.
STAIN/SLR EXT WD MGONY PAIL 5G STAIN/SEALER EXT WOOD CLEAR 5G Damtite 03555 Masonry Waterproofer
A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods. A semitransparent stain and sealer in one. It is a unique blend of oils, quality resins and finely ground pigments that penetrate deeply to protect and preserve the wood from the elements. Effective on all types of wood on premium-grade lumbers, including western red cedar, douglas fir, cypress, spruce and redwoods. Damtite Waterproofer, Ready-Mix, 5 gal, Pail, 8.3 - 8.6 pH, Liquid, White, 125 sq-ft Coverage, 12 - 24 hr Drying Time, Ammonia Odor/Scent, >212 Deg F Closed Cup Flash Point, Flammability Rating: 0, 1.56 Specific Gravity, 50 Deg F Application, Applicable Materials: Concrete Block, Cinder-Block, Poured Concrete, Masonry Stucco, Brick, Application Method: Nylon Bristle Brush or Roller, Latex Base, 25 psi, Resists: Alkali, For Providing Excellent Waterproofing Protection
F&P 14415 Oil Based Wood Preservative F&P 14395 Oil Based Wood Preservative F&P 14405 Oil Based Wood Preservative
F&P Wood Preservative, Oil Based, 5 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Cedar, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.942 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F, Fences F&P Wood Preservative, Oil Based, 5 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Natural, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.937 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F F&P Wood Preservative, Oil Based, 5 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Redwood, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.934 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F
Drylok 28615 Extreme Masonry Waterproofing Paint Cabot 2101 Waterproof Wood Protector Valspar 82020 Solid Color Concrete Stain
Drylok Masonry Waterproofing Paint, Extreme, Liquid, White, Smooth, 5 gal Capacity, 100 - 120 KU Viscosity, Latex Thinners, 75 - 100 sq-ft/gal Coverage, 3 hr Curing Time, 100 g/l VOC, 9 - 9.9 pH, Ammonia Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Sprayer, Resists: Mildew, NIOSH Approved, ASTM D7088/D6904, 9.8 -10 lb/gal Density Cabot Wood Protector, Waterproof, Series: 2101, 1 gal Capacity, Container Packing, Polyester Brushes, Stain Pads, Garden Sprayer Dispenser, Liquid, Clear, 205 deg F Flash Point, <100 g/l VOC, 50 - 90 deg F, Applicable Materials: Wood, Stone, Masonry, Brick and Concrete, OSHA 29 CFR 1910.1200, 100 -200 sq-ft/gal Coverage Area, For Wood Decks Valspar Solid Color Concrete Stain, 1 gal, <600 g/l VOC, 53 - 57 Krebs Units Viscosity, Liquid, Gray, 200 - 250 sq-ft Coverage, Normal Odor/Scent, 40 deg F Flash Point, Composition: Xylene, Toluene, Titanium Dioxide, Silica, Ethylbenzene, Mineral Spirits, 1.19 Specific Gravity, 50 - 90 deg F Application, Applicable Materials: Concrete
Valspar 82020 Solid Color Concrete Stain Valspar 82024 Concrete Sealer Green Products COPPER QTS Wood Preservative
Valspar Solid Color Concrete Stain, Series: 82020, 1 gal, <600 g/l VOC, 53 - 57 Krebs Units Viscosity, Liquid, Base 2, 200 - 250 sq-ft Coverage, Normal Odor/Scent, 40 deg F Flash Point, Composition: Xylene, Toluene, Titanium Dioxide, Silica, Ethylbenzene, Mineral Spirits, 1.17 Specific Gravity, 50 - 90 deg F Application Valspar Concrete Sealer, 4 gal Capacity, >600 g/l VOC, 53 - 57 KU Viscosity, Liquid, Gray, Low Gloss, 200 - 500 sq-ft/gal Coverage, 2 hr Drying Time, 72 hr Traffic, 40 deg F Flash Point, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, Composition: Xylene, Toluene, Titanium Dioxide, Flammability Rating: 3, 1.19 Specific Gravity, Curing Method Green Products Wood Preservative, Solvent Based, 1 qt Capacity, Can Packing, Brush Dispenser, Liquid, Brown, Unpleasant Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, Water damage, Wood rot
Cabot 1000 Waterproofing Sealer Deft 015-01 Lacquer Sanding Sealer Rustoleum 276088 Primer
Cabot Waterproofing Sealer, Series: 1000, 5 gal Capacity, <100 g/l VOC, 8 - 13 sec: (NO 4 Ford Cup) Viscosity, Liquid, Crystal Clear, 100 - 250 sq-ft/gal Coverage, 1 hr Touch Drying Time, 205 deg F Flash Point, Flammability Rating: 0, 1 Specific Gravity, >40 deg F Application, Applicable Materials: Wood, Concrete, Brick?, Stone and Unglazed Tile Deft Lacquer Sanding Sealer, 1 gal Capacity, Liquid, Clear, Solvent Odor/Scent, 400 - 500 sq-ft/gal Coverage, 30 Min Drying Time, Application Method: Brush or Sprayer, 0.881 Specific Gravity, -15 deg F Flash Point, For Interior Application Zinsser Mold Killing Primer, 5 gal, Water Base, Styrene Acrylic Resin, Liquid, White, Mild Odor/Scent, 624 sq-ft/gal Theoretical Coverage, 400 - 450 sq-ft/gal Practical Coverage Coverage, 30 Min To Touch, 1 hr To Handle, 1 hr To Recoat, 7 Days To Cure Completely Drying Time, Application Method: Brush, Roller, Spray, > 200 Deg F Flash Point, 1 g/l VOC, 40 - 80 Deg F, Suitable For Use With: All Existing Mold, Mildew, Moss, Fungi, Odor Causing Bacteria and Any Other Fungal Organisms, Used On Non-Porous Interior and Exterior, Residential, Commercial and Industrial Applications and Can Be Applied In Factories, Warehouses, Storage Facilities, Refrigerated Storage Facilities, Office Buildings, Residential Living, Schools, Hospitals, Veterinary Care Facilities, Elderly Care Facilities, Prisons and Correction Facilities, Wash Houses, Restaurants, Fitness Centers and Locker Rooms, Attics, Basements, Window Frames, Bathrooms, Wall Cavities, Base-Boards, Sub-Floors and Table Tops
Masterchem Industries Max Sealer Primer F&P 14416 Oil Based Wood Preservative F&P 14396 Oil Based Wood Preservative
Masterchem Industries Sealer Primer, Series: Max, 1 gal, Water Base, Liquid, White, Slight Odor/Scent, 400 sq-ft Coverage, 1 hr Drying Time, Application Method: Brush, Roller and Spray, 75 g/L VOC, 5 - 8 pH, 50 - 90 deg F, SCAQMD, CARB, OTC, LADCO, AIM, Leed Certified, For Interior Applications F&P Wood Preservative, Oil Based, 1 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Cedar, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.938 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F, Fences F&P Wood Preservative, Oil Based, 1 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Natural, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.937 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F
F&P 14406 Oil Based Wood Preservative Valspar 82085 Masonry Waterproofer Valspar 82390 Wet Look Sealer
F&P Wood Preservative, Oil Based, 1 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Redwood, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.941 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F Valspar Masonry Waterproofer, Heavy Duty, Series: 82085, 1 gal Capacity, <100 g/l VOC, 120 - 130 KU Viscosity, Liquid, White, 60 - 100 sq-ft/gal For Cinder Block and Cement, 200 sq-ft/gal For Other Surface Coverage, 30 - 60 min Touch Drying Time, 201 deg F Flash Point, Flammability Rating: 0, 1.49 Specific Gravity, 10 - 32 deg F Application, Walls Valspar Wet Look Sealer, Series: 82390, 5 gal Capacity, <100 g/l VOC, 10 - 15 sec: (NO 4 Ford Cup) Viscosity, Liquid, High-Gloss, 200 sq-ft/gal (Rough Surface), 400 sq-ft/gal (Smooth Surface) Coverage, 2 hr Touch/Recoat Drying Time, 205 deg F Flash Point, Composition: Proprietary Additive, Flammability Rating: 0, 1.02 Specific Gravity, For Exterior
Valspar 82092 Natural Look Waterproofer Green Products COPPER SPRAY Wood Preservative PRIMER SEALER STAIN OIL 5-GAL
Valspar Natural Look Waterproofer, Series: 82092, 5 gal Capacity, <100 g/l VOC, 8 - 12 sec: (NO 4 Ford Cup) Viscosity, Liquid, Flat, 75 - 150 sq-ft/gal Coverage, 1 hr Touch Drying Time, 205 deg F Flash Point, Flammability Rating: 0, 1 Specific Gravity, 50 - 90 deg F Application, Applicable Materials: Concrete, Brick?, Slate, Flagstone and Pavers Green Products Wood Preservative, 14 oz Capacity, Aerosol Can Packing, Sprayer Dispenser, Liquid, Brown, Unpleasant Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, Water damage, Wood rot Zinsser Primer/Sealer Stain Oil, Series: Cover Stain, Classic, 5 Gal, Container, Oil Base, Low-VOC Modified Alkyd Resin, Liquid, White, Solvent Like Odor/Scent, 1062 sq-ft/Gal Coverage, 2 hr Drying Time, Application Method: Surface Preparation, Priming, Mixing, Stain Blocking, Sealing, >93 Deg C Flash Point, 99 g/l VOC, 40 - 90 Deg F, Suitable For Use With: Any Topcoat
Drylok 20715 Masonry Waterproofing Paint California 20701-1 Stain Killer Primer Cabot Problem-Solver Exterior Primer
Drylok Masonry Waterproofing Paint, Liquid, White, Flat, 5 gal Capacity, 100 - 104 KU Viscosity, Oil Thinners, 100 sq-ft/gal Smooth Surfaces, 75 sq-ft/gal Rough Surfaces Coverage, 104 deg F Flash Point, 400 g/l VOC, Aromatic Odor/Scent, Application Method: Nylon Bristle or Fiber Brush, ASTM Certified, TT-C-555B, Federal Specification TT-P-1411A FixAll Stain Killer Primer, Series: 20701-1, 1 gal Capacity, Oil/Latex Base, Alkyd Resin, Viscous Liquid, Slight Ammonia Odor/Scent, ANSI Z400.1-2004 Certified Cabot Primer, Exterior, Series: Problem-Solver, 1 gal Capacity, Water, Solvent Base, Acrylic Resin, Liquid, White, 150 - 250 sq-ft (Rough Surface), 250 - 350 sq-ft (Smooth Surface) Coverage, 30 min Drying Time, Application Method: Stiff Bristle Brush and Spray, 1.32 Specific Gravity, 205 deg F Flash Point, 100 g/l VOC, 50 deg F, For Wood Siding
Cabot Problem-Solver Exterior Extra Quick Primer Sealer PRIMER ADHESION BONDING GAL   Zinsser 00901 B-I-N Primer/Sealer
Cabot Primer Sealer, Exterior Extra Quick, Series: Problem-Solver, 1 gal Capacity, Water, Solvent Base, Alkyd Resin, Liquid, White, Flat, 150 - 250 sq-ft (Rough Surface), 400 - 500 sq-ft (Smooth Surface) Coverage, 4 hr Drying Time, Application Method: Stiff Bristle Brush and Spray, 1.43 Specific Gravity, 105 deg F Flash Point, 200 g/l VOC, 45 deg F Formulated to bond to a variety of 'tough-to-paint' surfaces. Its advanced chemistry provides a sound anchor for topcoats while reducing or potentially eliminating the need for sanding dense, glossy surfaces. This product may be used under epoxies, lacquers and products containing Xylene or other hot solvents, provided it's allowed to dry for 24 hours before topcoating and tested for compatibility in an inconspicuous area before full coat application. Use where ensuring a secure bond is critical in situations when performance of a traditional water or oil-base primer may be questionable. Zinsser Primer Sealer, Series: B-I-N, 1 Gal, Shellac Resin, Liquid, White, Solvent Like Odor/Scent, 565 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 500 sq-ft/Gal Practical Coverage At Recommended DFT Coverage, 20 min to Touch, 45 min to Recoat, 1-3 Days to Full Cure Drying Time, Application Method: Brush, Roller, Spray, 54 Deg F Flash Point, 540 g/l VOC, 0 - 90 Deg F, Suitable For Use With: Water, Grease, Rust, Smoke, Asphalt, Graffiti and Many Other Types Of Stain, For Interior Applications
Duckback Mason's Select Concrete Sealer Duckback Mason's Select Concrete Sealer Zinsser 00900 B-I-N Primer/Sealer
Duckback Concrete Sealer, Series: Mason's Select, 1 gal Capacity, 0.83 lb/gal VOC, Clear, Gloss, 150 - 250 sq-ft First Coat, 250 - 350 sq-ft Second Coat Coverage, 1 hr Touch Drying Time, 24 hr Foot, 72 hr Vehicle Traffic, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, 1.02 Specific Gravity, Curing Method, Mixing Ratio, Mixing Style, Resists Duckback Concrete Sealer, Series: Mason's Select, 1 gal Capacity, 0.83 lb/gal VOC, Clear, Satin, 150 - 250 sq-ft First Coat, 250 - 350 sq-ft Second Coat Coverage, 1 hr Touch Drying Time, 24 hr Foot, 72 hr Vehicle Traffic, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, 1.02 Specific Gravity, Curing Method, Mixing Ratio, Mixing Style, Resists Zinsser Primer Sealer, Series: B-I-N, 5 Gal, Shellac Resin, Liquid, White, Mild Odor/Scent, 565 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 500 sq-ft/Gal Practical Coverage At Recommended DFT Coverage, 20 min to Touch, 45 min to Recoat, 1-3 Days to Full Cure Drying Time, Application Method: Brush, Roller, Spray, 54 Deg F Flash Point, 540 g/l VOC, 0 - 90 Deg F, Suitable For Use With: Water, Grease, Rust, Smoke, Asphalt, Graffiti and Many Other Types Of Stain, For Interior Applications
California 50500-1 Primer/Sealer
FixAll Bonding Primer, Series: Grip-Coat 50500, 1 Gal, Water Base, Urethane-Modified Acrylic Resin, Viscous Liquid, White, Slight Ammoniacal Odor/Scent, 400 - 450 sq-ft/Gal Smooth Surface, 200 - 275 sq-ft/Gal Porous Surface Coverage, 1 hr to Touch, 6 hr to Handle, 4 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, < 50 Deg F, Suitable For Use With: PVC, Glass, Fiberglass, Glossy Paints, Tile Or Glazed Block, Galvanized Metal, Aluminum, Copper, Lead and Tin
   
 
1