Home > HARDWARE > CONSTRUCTION HARDWARE > FOUNDATION HARDWARE
Choose a sub category:
ROD CHAIRS TIE WIRE / TOOLS ANCHOR BOLTS
CONCRETE PIER FORMS/CAPS FLOOR JACK POSTS REBAR PINS/REBAR CAPS
NAIL STAKES ADHESIVE ANCHORING
Sort By:
1
Acorn BT176-1C Bar Tie Marshalltown 14731 Manual Tie Wire Twister Mintcraft 16570 Rugged Wire Twister
Used to secure the position of rebar during concrete pouring. Safely and easily twists wire bar ties. Plastic handle. Rugged design. Compact size allows the tool to be used in tight space. Safely and easily twists wire bar ties. Hardwood handle, Ergonomic design.
Stanley 316489 Weldable Rebar Billy Penn 08212-25 Manual Bar Tie Twister Stanley 346965 Weldable Rebar
Stanley Weldable Rebar, 1/2 in, NO 4 Nominal, 36 in Overall Length, Steel Makes tying fast and easy. Wood handle. Stanley Weldable Rebar, 1/2 in, NO 4 Nominal, 4 ft Overall Length, Steel, Used in Landscaping
Quik-Tube 6922-01 Building Form Quikrete 6922-02 Concrete Quik-Tube Form Stanley 316497 Weldable Rebar
Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed. Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed. Stanley Weldable Rebar, 1/2 in, NO 4 Nominal, 72 in Overall Length, Steel, Used in Landscaping
Ad Tech T3438CK Mixing Nozzle Kit Quik-Tube 6922-03 Building Form Jackson Wire 16016344 Flexible Tie Wire
Nozzle kit for Ultrabond epoxy 22 oz. system.  Hi-Flow nozzles reduce waste while increasing flow. 15 inch length snaps off to 10 inches if required.  3/8 diameter at tip.  Built in mixing nut allows for fast and easy attachment to cartridge. Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed. Flexible, hand coil packed. Ideal for tying rods or pipe products. 10 Pound coil. 170 feet in length. Black.
Jackson Wire 16026344 Flexible Tie Wire CMC PIN04ZB24 Graded Rebar Pin Ultra Bond 1 A9-1 Anchoring Adhesive
Flexible, hand coil packed. Ideal for tying rods or pipe products. 10 Pound coil. 170 feet in length. Black. Reinforced bar, commonly used in concrete and masonry structures. Graded 420 (Grade 60) as per ASTM A-6163 Use for anchoring and doweling. Long working time with a quick cure time. Moisture insensitive, can be used in underwater environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications, seismic anchoring and bracing, surface crack repair. Ultra high-strength epoxy mixes through a static mixing tube and can also be resealed which means that any remaining material can be saved for later use. Cartridge w/nozzle.
Miraclebond 1350 A9-MB1350HN Anchoring Adhesive Marshalltown TWR26 Tie Wire Reel Marshall JP16 Adjustable Extend-O-Post Jackpost
Two component (1:1 ratio), 100-percent solids, high aspect ceramic blend, solvent-free, non-sag, high strength, high modulus, moisture insensitive epoxy system. Ideal for use as a bonding agent for almost any material, including metal, concrete, brick, wood, stone, block and other substrates. Can also be used for repairing holes, spalls, cracks in concrete, repairing rotted wood, installing and repairing anchor bolts or hand rails. LIMITATIONS: Minimum substrate and ambient temperature 40 degrees F (4.44 degrees C),  Cartridge with two nozzles; medium duty caulking tool required. Made of lightweight durable plastic to give many years of trouble free use. Fits any standard size belt. Accomodates all types of tie wire. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension.
ROD CHAIR REBAR NO2 MTL       Ultra Bond 1300 A22-1300N Anchoring Adhesive Marshalltown 12637 Pull Tie Wire Twister
ROD CHAIR REBAR NO2 MTL
Our Price: $28.99
Used to support rebar rods when pouring concrete foundation or slab. Two  component (1:1 ratio), 100 percent solids, high modulus, structural epoxy gel. It is a solvent free, low odor high strength, moisture insensitive, non-sag epoxy system. The resin and hardener are uniformly dispensed from a dual cartridge system and mixed simultaneously through a mixing nozzle or available in bulk. Long working time with a full cure in 24 hours. Moisture insensitive, may be used in damp environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications. Structural bonding of concrete to concrete. Meets ASTM C881-14: Type I, II, IV and V, Grade 3, Class B and C. Cartridges with Nozzle. Marshalltown Pull Tie Wire Twister, 12 in Handle Length, Rubber Grip Contoured Handle
Marshall JP36 Adjustable Extend-O-Post Jackpost Marshalltown TWR19 Tie Wire Reel Acorn BC214 Rod Chair
Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Constructed of light weight aluminum. Designed for left or right hand use. Large knob provides smooth operation. Accommodates all types of tie wire rolls. Fits any standard size belt. Support rebar in concrete slabs and foundations. Designed to fit both 3/8" and 1/2" rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500.
Billy Penn 8200 Double Rod Chair Acorn NSR3418 Round Nail Stake Billy Penn 8201 Triple Rod Chair
Used to hold rebar off grade and centered in the foundation trench. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Used to hold rebar off grade and centered in the foundation trench.
Marshall JP55 Adjustable Extend-O-Post Jackpost National Nail 1/2X8 Pre-Formed Anchor Bolt National Nail 1/2X6 Pre-Formed Anchor Bolt
Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete.
National Nail AG5810 Pre-Formed Anchor Bolt Acorn BT175-5M Bar Tie National Nail AG08 Pre-Formed Anchor Bolt
Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. Used to secure the position of rebar during concrete pouring. Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete.
Acorn NSR3424 Round Nail Stake STAKE NAIL ROUND 3/4X30IN     Acorn BC314 Rod Chair
STAKE NAIL ROUND 3/4X30IN
Our Price: $57.99
Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Support rebar in concrete slabs and foundations. Designed to fit both 3/8" and 1/2" rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500.
Marshall JP79 Adjustable Extend-O-Post Jackpost Acorn BT176-1M/5M Bar Tie Marshall JP84 Adjustable Extend-O-Post Jackpost
Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Used to secure the position of rebar during concrete pouring. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension.
National Nail AG10 Pre-Formed Anchor Bolt National Nail AG06 Pre-Formed Anchor Bolt National Nail 1/2X10 Pre-Formed Anchor Bolt
Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete.
CMC PIN04N018 Non-Graded Rebar Pin National Nail AG5806 Pre-Formed Anchor Bolt Ad Tech TM22HD Dispensing Tool
Reinforced bar, commonly used in concrete and masonry structures. Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. Features an in-line rod system, combined with a specifically designed friction plate that results in exceptional force making dispensing faster and reducing worker exertion and fatigue. Double gripping plates and steel trigger for increased durability and performance. For 22 Oz. cartridges, but comes with adaptable parts which allow for 16 Oz. cartridges as well.
National Nail 1/2X12 Pre-Formed Anchor Bolt STAKE NAIL ROUND 3/4X36IN     Acorn BT178-5M Bar Tie
STAKE NAIL ROUND 3/4X36IN
Our Price: $69.99
Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Used to secure the position of rebar during concrete pouring.
Marshall JP84HD Adjustable Extend-O-Post Jackpost National Nail AG5812 Pre-Formed Anchor Bolt Mutual 14640-2 Mushroom Rebar Cap
Use for supporting sagging floors, weak beams and warping stairways. 2-1/2" x 14 gauge prime steel inner tubing. 2-3/4" x 14 gauge prime steel outer tubing. 2-1/2" steel collar. 1-1/4" x 6" steel screw. Two 4" x 6" x 7 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. Mushroom style rebar safety caps protect from protruding rebar at construction sites. Bright colors for excellent visibility. Use where the danger of impalement is not present.
Marshall AC363/3637 Adjustable Round Column Marshall AC386 Adjustable Round Column Marshall AC370/3704 Adjustable Round Column
3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145.
Marshall AC373/3737 Adjustable Round Column Marshall AC390 Adjustable Round Column Marshall AC376/3760 Adjustable Round Column
3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145.
National Nail AG12 Pre-Formed Anchor Bolt Marshall AC379/3791 Adjustable Round Column Marshall AC380/3804 Adjustable Round Column
Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145. 3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted; holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together. Meets IRC and IBC Specifications Report No. CCRR-0145.
USP Lumber ACR-10 Anchoring Adhesive Quikrete 6917-03 Expansion Joint Deacero 5689/RBTW35 Coil Tie Wire
Two component, 100-percent solids, all weather, moisture insensitive, non-sag, non-shrink, solvent free, high strength epoxy acrylate. Common usages include anchoring railing, fence posts, machinery or repair applications. For use in anchoring threaded rod and rebar into normal and lightweight concrete, stemwalls, concrete block, reinforced brick and unreinforced masonry. Bonds to most construction materials. All weather formula cures down to 23-degrees. Cures in as little as 25 minutes. Fast dispensing.  Cartridge with 2 nozzles.  Meets ICCES ESR-1702, FL4928 codes. Used where concrete meets concrete for a stronger bond. Expansion joint filler made from resilient wood to prevent damage during expansion and contraction of concrete. Used in driveways, sidewalks, and patios, between concrete slabs and to separate slabs from structures. Meets requirements of ASTM D 1751. Center hole (semi-square with round corners) enables roll to be quickly reversed for right or left hand use. Roll slips quickly onto the reel, yet easily rewinds. Continuous rolls and uniform diameters. Ideal to tie rods. Meets ASTM-A-853. 16.5 gauge. 3.5 pound coil.
CMC PIN03NO18 Graded Rebar Pin Mutual 14640-4 Rebar Cap Mutual 14640-3 Standard Rebar Cap
Reinforced bar, commonly used in concrete and masonry structures. OSHA rebar caps made of space age high-density polymer to protect against impalement injuries. Bright orange and fits rebar #4 - #8. Meets new OSHA requirement 344.90. Boxed. Mushroom style rebar safety caps protect from protruding rebar at construction sites. Bright colors for excellent visibility. Use where the danger of impalement is not present.
   
 
1