Home > HARDWARE > GENERAL HARDWARE > CABINET & DRAWER HARDWARE
Choose a sub category:
CABINET CATCHES CABINET LATCHES CABINET, CAM & DRAWER LOCKS
CABINET HINGES - BUTT CABINET HINGES - "H' STYLE CABINET HINGES - SELF CLOSING
CABINET HINGES - NON SELF CLO CABINET HINGES - CONCEALED MISC CABINET HINGES
CABINET PULLS CABINET KNOBS - METAL CABINET KNOBS - PORCELAIN
CABINET KNOBS - PLASTIC CABINET KNOBS - WOOD DRAWER SLIDES
LAZY SUSANS MISC CABINET HARDWARE
Sort By:
1
Prime-Line CCSC-7158 Undermount Drawer Track Guide Kit Prime-Line CCBP-7157 Undermount Drawer Track Guide Kit Amerock Allison BP802PBK Round Cabinet Knob
Prime-Line Drawer Track Guide Kit, Undermount, 2-1/4 in Length X 29/32 in Width, Includes: (1) Guide, (2) Side Saddles and (1) Set of Installation Fasteners, Suitable For Use With: 1/4 X 7/8 in Track, Plastic, Brown, For Aligning Drawers Prime-Line Drawer Track Guide Kit, Undermount, 2-1/2 in Length X 3/4 in Width, Includes: (1) Guide, (2) Side Saddles and (1) Set of Installation Fasteners, Suitable For Use With: 1/4 X 3/4 in Track, Plastic, Blue, For Aligning Drawers Knob with 1-1/4" diameter x 3/4" height. Use with one #8-32 x 1" type screw.
Prime-Line CCSC-7156 Undermount Drawer Track Guide Kit Prime-Line CCSC-7159 Undermount Drawer Track Guide Kit Prime-Line CCSC-7162 Drawer Track Guide Kit
Prime-Line Drawer Track Guide Kit, Undermount, 2 in Length X 25/32 in Width, Includes: (1) Guide, (2) Side Saddles and (1) Set of Installation Fasteners, Suitable For Use With: 9/32 X 3/4 in Track, Plastic, Red, For Aligning Drawers Prime-Line Drawer Track Guide Kit, Undermount, 2-7/16 in Length X 1-1/8 in Width, Includes: (1) Guide, (2) Side Saddles and (1) Set of Installation Fasteners, Suitable For Use With: 9/32 X 1-1/8 in Track, Plastic, Green, For Aligning Drawers Prime-Line Drawer Track Guide Kit, 2-1/2 in Length X 1-5/16 in Width, Includes: (1) Guide, (2) Side Saddles and (1) Set of Installation Fasteners, Suitable For Use With: 3/32 X 1-9/32 in Track, Plastic, Yellow, For Aligning Drawers
Amerock BP3473PT Magnet Catch Amerock BP34712G Flexgrip Friction Catch Amerock Allison 890ABS Round Cabinet Knob
Size: 2"L x 1-1/8"W x 1/2"H; Steel Strike: 1"L x 3/4"W x 1/16"H. Polybagged. Size: 1-5/16"L x 3/4"W x 5/8"H. Polybagged. Pull with 1-1/2" diameter x 3/4" height. Use with one #8-32 x 1" type screw.
Amerock BP97143G Roller Catch Amerock Allison BP3401CB Cabinet Pull Amerock Allison BP34133 Round Modern Cabinet Knob
Polybagged. Pull with 3-1/4" center, 5-1/16" length x 1" width x 3/4" height. Use with two #8-32 x 1" type screws. Use with one #8-32 x 1" type screw. Includes two different screw lengths for your convenience.
Amerock BP347414 Double Roller Catch Amerock Allison BP3403CB Round Cabinet Knob Amerock Allison BP341326 Round Modern Cabinet Knob
Size: 1"L x 15/16"W x 1/2"H; steel strike: 1"L x 11/16"W x 3/8"H. Polybagged. Knob with 1-1/4" diameter x 3/4" height. Use with one #8-32 x 1" type screw. Use with one #8-32 x 1" type screw. Includes two different screw lengths for your convenience.
Amerock Allison 848LB Round Cabinet Knob Amerock Allison BP3423BB Round Traditional Cabinet Knob Amerock Allison BP811WD Round Cabinet Knob
Pull with 1-3/8" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw. Unfinished wood knob. Use with one #8-32 x 1" type screw.
Amerock Allison BP802PW Round Cabinet Knob Amerock Allison BP3467AE Round Country Manor Cabinet Knob Amerock Allison BP3443BB Round Harmony Cabinet Knob
Knob with 1-1/4" diameter x 3/4" height. Use with one #8-32 x 1" type screw. Knob with 1-1/16" diameter x 1" height. Use with one #8-32 x 1" type screw. Knob with 1-1/4" (32mm) diameter x 15/16" height. Use with one #8-32 x 1" type screw.
Amerock Allison 14403SCH Round Hollow Cabinet Knob Amerock Allison 232WHT Round Cabinet Knob Amerock Allison 894ABS Cabinet Pull
Knob with 1-5/16" diameter x 7/8" height. Use with one #8-32 x 1" type screw. Height 1, use with one #8-32 x 1" type screw. Pull with 3" center, 4-5/16" length x 7/8" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP53005G10 Round Cabinet Knob Mintcraft CJ2351UF Round Cabinet Knob Amerock Allison BP813WD Round Cabinet Knob
Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Unfinished wood knob with 1-1/8" diameter. Includes screws. Unfinished wood knob. Use with one #8-32 x 1" type screw.
Amerock Allison 69228 Round Plain Cabinet Knob Mintcraft C933PC Round Cabinet Knob KNOB 1IN 25MM UNFINISHED
Ceramic knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw. Easy to match any decor. 1-3/8" diameter. Includes screws. Use with one #8-32 x 1" type screw.
Mintcraft C933ACP Round Mushroom Cabinet Knob PULL CABINET BRSH CHROME 3IN  Prime Line R 7084 Drawer Track Guide Kit
Easy to match any decor. 1-3/8" diameter. Includes screws. Solid brass wire pull with 3" center, 3.312" length x .375" width x 1.25" height. Use with two #8-32 x 1" type screws. Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4" x 7/8" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners.
Prime Line R 7152 Drawer Track Guide Kit Prime Line R 7154 Drawer Track Guide Kit Mintcraft C103WGF35 Round Mushroom Floral Cabinet Knob
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32" x 1-9/32" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Easy to match any decor. 1-3/8" diameter. Includes screws.
Amerock BP34283 Self-Closing Cabinet Hinge Amerock BP34293 Self-Closing Variable Overlay Cabinet Hinge Amerock BP3428BB Self-Closing Cabinet Hinge
HINGE CABINET STL 3/8IN
Our Price: $1.99
3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H. 3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H.
Amerock Allison BP803PW Wired Cabinet Pull Amerock Allison BP34163 Basic Modern Cabinet Pull Amerock Allison BP341626 Basic Modern Cabinet Pull
Pull with 3" center, 3-5/16" length x 3/8" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP3441BB Harmony Cabinet Pull Amerock Allison BP34413 Harmony Cabinet Pull Amerock Allison 217WHT Round Plain Cabinet Knob
Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws. Height 1, use with one #8-32 x 1" type screw.
Amerock Allison 221WHT Round Cabinet Knob Amerock Allison 244WPB Round Cabinet Knob Amerock Allison 255PB Round Plain Cabinet Knob
Ceramic knob with 1-1/2" diameter x 1-1/16" height. Use with one #8-32 x 1" type screw. Pink Rose Insert. 1-1/4" diameter. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter x 7/8" height. Use with one #8-32 x 1" type screw.
Amerock Allison 253G10 Cabinet Pull Prime Line R 7082 Drawer Track Guide Kit Prime Line R 7085 Drawer Track Guide Kit
Pull with 3" center, 4-7/8" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws. Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 3/4" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track.
Prime Line R 7133 Drawer Track Backplate Prime Line R 7143 Undermount Drawer Track Back Plate Amerock Allison BP53005ORB Round Cabinet Knob
Can be inverted for self-adjusting application, used on rolled edge and other center mounted tracks. 1" square cavity allows self-alignment of center mounted drawer tracks. 1-13/16" hole spacing. Includes installation screws. Raw finish. Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw.
Amerock BP98232G Spring Cushion Roller Catch Mintcraft C133WH/AB35 Round Cabinet Knob Amerock Allison BP814WD Round Cabinet Knob
Size: 1-3/4"L x 1-1/4"W x 3/8"H. Polybagged. Easy to match any decor. 1-3/8" diameter. Includes screws. Unfinished wood knob. Use with one #8-32 x 1" type screw.
Prime Line R 7086 Drawer Track Guide Kit Prime Line R 7153 Angle Drawer Guide Prime Line R 7126 Drawer Track Front Plate
Restores smooth operation of track mounted drawers. Includes 2 guides, 2 side saddles and 2 sets of installation fasteners. Side saddles help to center drawer and restore smooth operation of track mounted drawers. Includes 10 side saddles and 20 fasteners. Supports front end of drawer track; used on rolled edge metal tracks. Contents: Front plate with installation screws.
PULL 3IN 76MM SAT NICKEL      Mintcraft Traditional Classics SF843AB Center Ring Cabinet Pull Amerock Allison 253LB Cabinet Pull
3? Center-to-Center, 0.79? projection. 3"L - Polybagged. With screws. Pull with 3" center, 4-7/8" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws.
DRAWER PULL 96MM FLAT BLACK   Prime-Line R 7128 Drawer Track Guide Kit Mintcraft C133WH/CH35 Round Cabinet Knob
Pull with 3-3/4" (96mm) center to center, 4-15/16? (125mm) L x 1/2? (13mm) W x 15/16? (24mm) H. Screw Size(s):  #8-32 x 1?L machine screw. Prime-Line Drawer Track Guide Kit, 2-1/2 in Length X 1-5/16 in Width, Suitable For Use With: 1/8 X 1-5/16 in Track, Plastic, White, For Aligning Drawers Easy to match any decor. 1-3/8" diameter. Includes screws.
Mintcraft C133WH/PB35 Round Cabinet Knob Amerock BP3429BB Self-Closing Variable Overlay Cabinet Hinge Prime Line R 7223 Drawer Track Guide and Glide
Easy to match any decor. 1-3/8" diameter. Includes screws. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H. White polyethylene guide with no back alignment tabs; white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 3/4" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners.
Amerock BP34173 Cabinet Hinge Prime Line U 9047 Roller Catch Amerock BP3429ORB Self-Closing Variable Overlay Cabinet Hinge
Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2") 1-7/16"L plated steel housing and 1-3/4"W x 15/16"H strike with 3/4" spring loaded nylon roller, designed for use on interior closet and cabinet doors. With screws. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H.
Prime Line R 7130 Drawer Track Guide Kit Mintcraft Traditional Classics SF816CH Pitcher Cabinet Pull Amerock Inspiration BP3428ORB Self-Closing Cabinet Hinge
Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32" x 1-3/16" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Designed for use with metal rolled-edge tracks. 3"L - Polybagged. With screws. 3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H.
Mintcraft CH-590 Double Spring Cushion Roller Catch Amerock BP97653PT Magnet Catch with Offset Strike KNOB 1-3/16IN WHITE/POL CHROME
With screws. Size: 1-15/16"L x 11/16"W; Strike 1-1/8"L x 7/8"W x 3/4"H. Use (4) #6 T.H. x 1/2" screws and (1) #15 x 1/2" nail. Polybagged. 1-1/4" diameter. Use with one #8-32 x 1" type screw.
Mintcraft CJ2115UF Decorative Cabinet Pull Amerock Allison BP53011G10 Ring Cabinet Knob Mintcraft SF834PB Spoon Foot Cabinet Pull
Polybagged. With screws. Knob with 1-1/4? (32mm) L x 1-3/16? (30mm) H. Screw Size(s): #8-32 x 1?L machine screw. 3"L - Polybagged. With screws.
Amerock Allison BP86526D Wired Cabinet Pull Amerock Allison BP594AE Round Colonnade Cabinet Knob Amerock BP9783AL Magnet Catch
Solid brass wire pull with 3" center, 3.312" length x .375" width x 1.25" height. Use with two #8-32 x 1" type screws. Knob with 1-1/2? (38mm) L x 7/8? (22mm) H. Use with one #8-32 x 1" type screw. Size: 2"L x 1"W x 5/8"H; Strike: 1-1/8"L x 3/4"H. Polybagged.
Amerock Allison 252PB Cabinet Pull Amerock Allison BP53471G10 Round Scroll Cabinet Knob Prime Line R 7147 Flat Stepped Drawer Guide Roller Assembly
Pull with 3" center, 5-1/2" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws. Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Rollers mount at the front of the drawer opening, and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller, and 1 set of installation fasteners.
Mintcraft Traditional Classics SF809ACP Cabinet Pull Mintcraft Traditional Classics SF809PB Cabinet Pull Amerock Inspiration BP3428G10 Self-Closing Cabinet Hinge
3"L - Polybagged. With screws. 3"L - Polybagged. With screws. 3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H.
Amerock Inspiration BP3429G10 Self-Closing Cabinet Hinge DRAWER PULL 4IN BRUSHED CHROME Amerock Allison 172SCH Cabinet Pull
Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H. Transitional style, 4-5/16? length, 5/16? width, 1-1/4? projection, 4? mounting hole. Pull with 3" center, 4-5/8" length x 9/16" width x 1" height. Use with two #8-32 x 1" type screws.
Prime Line R 7145 Drawer Track Backplate Knape & Vogt 1284-4WP Rear Mouth Socket Rear Mounting Bracket Amerock BP341726 Semi-Concealed Cabinet Hinge
Used to hold track to back of cabinet; fits most popular side mount rails. Contents: 2 backplates; 2 sets of installation screws. Optional bracket for use with draw slide No.1284. Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2")
Mintcraft Traditional Classics SF814PB Spoon Foot Cabinet Pull Mintcraft Traditional Classics SF809CH Cabinet Pull Amerock Allison BP341526 Basic Modern Bail Cabinet Pull
3"L - Polybagged. With screws. 3"L - Polybagged. With screws. Pull with 2-3/4" center, 3-7/16" length x 3/4" width x 15/16" height. Use with two #8-32 x 1" type screws.
Amerock Allison 69128 Round Cabinet Knob Mintcraft Traditional Classics SF843BNI Center Ring Cabinet Pull Mintcraft Traditional Classics SF816PB Pitcher Cabinet Pull
Porcelain knob with 1-1/2" diameter x 15/16" height. Use with one #8-32 x 1" type screw. 3"L - Polybagged. With screws. 3"L - Polybagged. With screws.
Amerock Allison 937 Cabinet Pull Amerock Allison BP53470G10 Scroll Cabinet Pull Amerock BP9798AW Magnet Catch
Pull with 3" center, 3-1/2" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 3-13/16" length x 11/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Size: 2-1/32"L x 1-1/16"W x 13/16"H; Strike 1"L x 3/4"W. Polybagged.
Amerock BP7139W Self-Closing Semi-Concealed Cabinet Hinge Amerock Allison BP52994G10 Narrow Arch Cabinet Pull Prime-Line S 4048 Deadbolt Lock
Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H. Transitional style pull, 3-3/4? (96mm) mounting holes. 1? projection, 4-3/16? overall length, 19/13? width. Use with two #8-32 x 1" type screws. Prime-Line Deadbolt Lock, Suitable For Use With: Old Style Apartment Mail Boxes, Keyed Key, 2 Keys, 1-3/8 in Overall Length, 1-7/16 in Overall Width, 5/16 in Overall Depth, Steel, Gold, Brass
Amerock BP792826 Self-Closing Imperial Cabinet Hinge DRAWER PULL 3IN SATIN NICKEL  KNOB 1-3/8IN ALLISON SATNICKEL
Amerock Cabinet Hinge, Self-Closing, Imperial, 5 Holes, 2-3/4 in Door Leaf Length, 2 in Door Leaf Width, Face Mounting, Steel, Polished Chrome, BHMS Approved, KCMA Certified, With 3/8 in Inset Transitional style pull with 3" center, 1-1/4" length x 5/8? width, 3-3/8" projection. Oversized, 1-3/8" diameter knob. Use with one #8-32 x 1'' type screw.
Prime Line R 7131 Drawer Track Back Socket Prime Line R 7083 Drawer Track Guide Kit PULL 3-3/4IN OILRUB BRONZE
Mounts horizontally or vertically. Used on Amerock Tri-roller drawer slide track. (Track fits snug). Blue polyethylene guide and white polyethylene side saddles; restores smooth operation of track mounted drawers. Contents: 2 guides; 4 side saddles; 2 sets of installation fasteners. Note: Fits a 1/4" x 3/4"track. Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw).
Amerock Allison BP53471ORB Round Scroll Cabinet Knob Amerock Allison 14404SCH Round Plain Cabinet Knob Amerock Allison 245WPB Cabinet Pull
Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Transitional style knob with 1-3/16" diameter x 1-1/18" height. Use with one #8-32 x 1" type screw. Metal pull with 3" center, 4-15/16" length x 3/4" width x 1-1/4" height. Use with two #8-32 x 1" type screws. White insert.
Mintcraft Traditional Classics SF834BNI Spoon Foot Cabinet Pull Mintcraft Traditional Classics SF814AN Spoon Foot Cabinet Pull Prime Line R 7148 Convex Drawer Track Roller
3"L - Polybagged. With screws. 3"L - Polybagged. With screws. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws.
Mintcraft Traditional Classics SF816BNI Pitcher Cabinet Pull Amerock Allison BP55220G10 Small Oblong Cabinet Knob Amerock Traditional Classics 14303CB Crystal Cabinet Knob
3"L - Polybagged. With screws. Knob with 1.125" diameter x 2.625" length  x  0.75" width. Use one #8 - 32 x 1" type screw. Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw.
Prime Line R 7141 Drawer Track Roller Mintcraft Traditional Classics SF820AN Spoon Foot Cabinet Pull Prime Line R 7132 Drawer Track Back Roller with Plastic Roller
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. 3"L - Polybagged. With screws. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contents: 2 roller assemblies, 2 sets of installation screws.
Mintcraft CH-220 Decorative Overlay Cabinet Hinge KNOB BRASS 1/2IN              PULL CUP BURNISHED BRASS 3IN
KNOBS 1/2IN BRS
Our Price: $3.49
3/8" hinge with screws. 2 pieces. Visual-pack. Pull with 3" center, 3-3/8" length x 1-1/4" width.
Mintcraft Traditional Classics SF834AN Spoon Foot Cabinet Pull Amerock BP3404CB Cabinet Hinge Mintcraft Traditional Classics SF817PB Cabinet Pull
3"L - Polybagged. With screws. 3-1/2"L x 1-7/16"W - Polybagged. 3"L - Polybagged. With screws.
Amerock Allison BP53470ORB Scroll Cabinet Pull Amerock Essential'Z BP26201G10 Arch Tip Cabinet Pull Amerock Inspirations BP1581WID Round Leaf Cabinet Knob
Pull with 3" center, 3-13/16" length x 11/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 5-1/4" length x 3/8" width x 1" height. Use with two #8-32 x 1" type screws. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
Amerock BP33772AL Double Magnet Catch Amerock Anniversary BP853G9 Round Cabinet Knob Amerock Allison 263WCH Cabinet Pull
3-1/4"L x 1-1/8"W x 9/16"H (projection). Polybagged. Metal knob with 1.375" diameter x 1.062" height. Use with one #8-32 x 1" type screw. Metal pull with 3" center, 5" length x 3/4" width x 1-1/4" height. Use with two #8-32 x 1" type screws. White insert.
Amerock Inspirations BP1586G10 3-Ring Round Cabinet Knob Amerock BP7128W Self-Closing Semi-Concealed Cabinet Hinge Mintcraft Traditional Classics SF740AB Decorative Cabinet Pull
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. 3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H. 3"L - Polybagged. With screws.
Mintcraft Traditional Classics SF820BNI Spoon Foot Cabinet Pull Amerock Ceramics BP72530 Round Cabinet Knob Prime-Line R 7227 Rear Drawer Track Socket
3"L - Polybagged. With screws. Use with one #8-32 x 1" type screw. Prime-Line Drawer Track Socket, Rear, Nylon, White, 3 in Length X 1-5/16 in Width X 2-1/16 in Height, For Front to Back adjustment of the Rail
BRACKET RR MT F/MDL TT100 ZINC BRACKET RR MT F/MDL 84-8450 ZN Amerock Inspirations BP1586ORB 3-Ring Round Cabinet Knob
Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
Amerock BP792926 Self-Closing Variable Overlay Cabinet Hinge Amerock Revitalize BP55342ORB Round Cabinet Knob Amerock BP7929AE Self-Closing Imperial Variable Overlay Cabinet Hinge
Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #5 O.H. x 5/8" and (3) #5 F.H. x 1/2" screws. 2-3/4"L x 2"W x 3/4"H. Knob with 1-1/4? (32mm) L x 1-1/4? (32mm) H. Screw Size(s): #8-32 x 1?L machine screw. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #5 O.H. x 5/8" and (3) #5 F.H. x 1/2" screws. 2-3/4"L x 2"W x 3/4"H.
Amerock Inspirations BP1586WID 3-Ring Round Cabinet Knob Amerock Allison BP53010G10 Cup Cabinet Pull Amerock Allison BP52995G10 Arch Tip Cabinet Pull
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Pull with 3" center, 3-3/8" length x 1-1/4" width. Pull with 96mm center. Use with two #8-32 x 1" type screws.
Prime Line R 7125 Undermount Drawer Track Kit Amerock Essential'Z BP19259G10 Open Arch Cabinet Pull Amerock Anniversary BP874BN Cabinet Pull
Rolled edge galvanized steel track with polyethylene guides and nylon front rollers. Track may be cut down for shorter drawer and can be used for top or bottom mount installations. Contents: 1 track; 1 front plate; 1 back plate; 1 drawer guide; 2 front rollers; 1 set of installation fasteners. Pull with 3" center, 4-1/2" length x 9/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Pull with 3" center, 5" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws.
Amerock Inspirations BP1581R2 Round Leaf Cabinet Knob Amerock Inspirations BP1585G10 Round Rope Cabinet Knob Amerock Anniversary BP85326 Round Cabinet Knob
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Knob with 1-1/4? (32mm) L x 1-1/16? (27mm) H. Screw Size(s): #8-32 x 1?L machine screw. Metal knob with 1.375" diameter x 1.062" height. Use with one #8-32 x 1" type screw.
Amerock Anniversary BP874G9 Cabinet Pull Amerock Allison BP735AE Chatsworth Arch Cabinet Pull Stanley BP36752G Magnet Catch
Pull with 3" center, 5" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4-3/4" length x 3/4" width x 7/8" height. Use with two #8-32 x 1" type screws. Single screw mounting speeds installation. Slotted screw hole in case provides ample adjustment. Rugged case has no sharp corners. "Floating" magnet helps assure positive contact. Bright zinc plated, 1-1/8" x 11/16" strike; 1-1/8" x 1-1/16" case. With screws.
Mintcraft Traditional Classics SF740AE Decorative Cabinet Pull Mintcraft SF671-31PB Round Cabinet Knob Mintcraft C0350ABM Round Cabinet Knob
3"L - Polybagged. With screws. Easy to match any decor. 1-1/4" length x 55/64" width x 7/32" height. Includes screws. Easy to match any decor. 1-3/8" diameter. Includes screws.
Amerock Revitalize BP55342G10 Round Cabinet Knob Mintcraft C202PB/OK Cabinet Pull Amerock Inspirations BP1585FB Round Rope Cabinet Knob
Knob with 1-1/4? (32mm) L x 1-1/4? (32mm) H. Screw Size(s): #8-32 x 1?L machine screw. With oak handle center, easy to match any decor. 3"L - Polybagged. With screws. Knob with 1-1/4? (32mm) L x 1-1/16? (27mm) H. Screw Size(s): #8-32 x 1?L machine screw.
Shepherd 9547 Square Lazy Susan Turntable CATCH BULLET BRASS 3/8IN      Amerock BP7928AE Self-Closing Imperial Cabinet Hinge
Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc. National Hardware Bullet Catch, Series: V1845, 3/8 in Bore, Steel, Bright Brass, For Cabinets, Chests and Doors Amerock Cabinet Hinge, Self-Closing, Imperial, 5 Holes, 2-3/4 in Door Leaf Length, 2 in Door Leaf Width, Face Mounting, Steel, Antique Brass, BHMS Approved, KCMA Certified, With 3/8 in Inset, 19.05 mm Projection
Amerock Allison BP52996G10 Flat Arch Cabinet Pull Amerock Inspirations BP1586WN 3-Ring Round Cabinet Knob KNOB 1-1/4IN ELEGANT BRASS
Pull with 96mm center. Use with two #8-32 x 1" type screws. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
KNOB 1-1/4 INCH SATIN NICKEL  CATCH CABINET WHITE           CATCH CABINET WHITE
CABINET CATCHES WHT
Our Price: $3.99
CABINET CATCHES WHT
Our Price: $3.99
Traditional style, 1-1/4? diameter x 1? width. Design allows magnet to pivot so that it will always center squarely on the metal strike for maximum holding strength. Offers sturdy, permanent magnet in a nylon case. Slotted screw holes are for ease of adjustment. Visual-pack. Design allows magnet to pivot so that it will always center squarely on the metal strike for maximum holding strength. Offers sturdy, permanent magnet in a nylon case. Slotted screw holes are for ease of adjustment. Visual-pack.
HINGE INSET 3/8IN SATIN NICKEL KNOB BRASS 5/8IN              KNOB DECO ANT BRASS 3/4IN
KNOBS 5/8IN BRS
Our Price: $3.99
Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2") Visual-pack. Visual-pack.
KNOB DECO BRASS 3/4IN         HINGE INSET FACE-MNT ORB 3/8IN Mintcraft C202CPB Spoon Foot Cabinet Pull
Visual-pack. Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2") With white handle center, easy to match any decor. 3"L - Polybagged. With screws.
Mintcraft C893PB Round Mushroom Cabinet Knob Mintcraft C202CPW Spoon Foot Cabinet Pull Amerock Allison BP55222G10 Cabinet Pull
Easy to match any decor. 1-3/8" diameter. Includes screws. With white handle center, easy to match any decor. 3"L - Polybagged. With screws. Pull with 3" center.  3.6" length x 0.556" width. Use two #8 - 32 x 1" type screw.
Mintcraft Traditional Classics SF740BNI Decorative Cabinet Pull Mintcraft Traditional Classics SF603D-31.5PB Round Cabinet Knob BRACKET REAR MNT F/MDL 1805 ZN
3"L - Polybagged. With screws. Easy to match any decor. 1-1/4" diameter. Includes screws. Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8" socket.
KNOB RND BURNSHD BRASS 1-1/4IN Toolbasix 6298319-3L Drawer Lock Prime Line R 7240 Right Hand/Left Hand Drawer Track Back Plate
Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Alloy steel construction. Fits max 3/4" thick. For cabinet doors and desk drawers. 1.417" screw hole spacing. 2.04" overall width. Includes 2 keys and screws. White nylon; 2-3/4"socket depth allows 2"of front to back adjustment of the rail; used on side mounted drawer track systems. Raw finish. Contents: 1 left hand bracket; 1 right hand bracket; 2 sets of installation screws. NOTE: Right side has a larger lip.
Mintcraft Traditional Classics SF603D-31.5CH Round Cabinet Knob Mintcraft SF671-31AN Round Cabinet Knob Mintcraft CH-225 Decorative Overlay Cabinet Hinge
Easy to match any decor. 1-1/4" diameter. Includes screws. Easy to match any decor. 1-1/4" length x 55/64" width x 7/32" height. Includes screws. 3/8" hinge with screws. 2 pieces.
Amerock Revitalize BP55342GB Round Cabinet Knob Prime-Line R 7218 Flat Guide Twin Roller Assembly Mintcraft Traditional Classics SF657-31.5PB Round Cabinet Knob
Knob with 1-1/4? (32mm) L x 1-1/4? (32mm) H. Screw Size(s): #8-32 x 1?L machine screw. Prime-Line Guide Twin Roller Assembly, Flat, Polyethylene, White, 15/16 in OD X 2-3/16 in Width, For Drawers Easy to match any decor. 1-1/4" diameter. Includes screws.
Amerock Bar Pulls BP19010SS Cabinet Pull Amerock Allison BP778AE Round Carriage House Cabinet Knob Amerock Inspirations BP1580WID Botanica Leaf Cabinet Pull
Metal pull with 3" center to center, 5-1/3" length x 1/2" width x 1.34" height. Use with two #9-32 x 1" type screws. Knob with 1-1/4" diameter x 1" height. Back plate with 2'' diameter x 1/4" thickness. Use with one #8-32 x 1" type screw. Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish.
Amerock Allison BP771WI Round Legacy Cabinet Knob Amerock Allison BP1950H26D Round Cabinet Knob Amerock Swirl'Z BP9338G10 Ball Eclectic Spiral Cabinet Knob
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. 1-1/4"D x 1-1/16"H. Knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
Mintcraft CH-070 Self-Closing Wrap Around Cabinet Hinge Amerock Traditional Classics 14303G10 Acrylic Round Crystal Cabinet Knob Mintcraft CH-293 Decorative Cabinet Hinge
Self closing 3/8" inset with 1/2" overlay. Screws included. 2 pieces. Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw. Decorative offset hinge with screws. 2 pieces. 3.43" height.
Amerock Traditional Classics 14303ORB Acrylic Round Crystal Cabinet Knob Amerock Reflections BP1387G10 Round Cabinet Knob Mintcraft Traditional Classics SF657-31.5CH Round Cabinet Knob
Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter x 1-1/16" height. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Easy to match any decor. 1-1/4" diameter. Includes screws.
Prime-Line U 9941 Drawer and Cabinet Lock Amerock BP7550BB Self-Closing Partial Wrap Around Cabinet Hinge DRAWER PULL 3IN SATIN NICKEL
Prime-Line Drawer and Cabinet Lock, Suitable For Use With: 5/16 in Thickness Metal or Wood Doors or Drawers, Keyed Key, 2 Keys, Yale Y-11 Keyway, Die Cast/Steel, Stainless Steel, Includes: (3) Cams, (1) Trim Collar, (1) Spur Washer, (2) Rotation Washers and (1) Lock Nut, 3/4 in Diameter X 5/8 in Length Cylinder Amerock Cabinet Hinge, Self-Closing, Partial Wrap Around, 3 Holes, 2-1/4 in Door Leaf Length, 1-3/4 in Door Leaf Width, Steel, Burnished Brass, BHMS Approved, KCMA Certified, 1/2 in Overlay Traditional style.
DRAWER PULL 3IN OIL-RUB BRONZE KNOB 34MM WESTERLY GRAPHITE   Prime Line U 9947 Drawer and Cabinet Lock
Traditional style. Transitional style, 5-1/16? length, 1-1/16? projection. Keyed locking unit for added security. Fits 7/8" hole. 5/16" bolt throw. Includes 1 lock, 2 keys and installation screws.
Mintcraft Traditional Classics SF4013P-32AB Round Scroll Cabinet Knob Mintcraft CH-060 Self-Closing Cabinet Hinge Amerock Inspirations BP1580R2 Botanica Leaf Cabinet Pull
Easy to match any decor.  1-1/4" diameter. Includes screws. 3/8"  inset with screws. Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish.
Amerock Allison BP1950HG10 Round Hollow Cabinet Knob Amerock Mulholland BP53029ORB Square Traditional Cabinet Knob Amerock Manor BP26127G10 Oval Cabinet Knob
Knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw. Knob with 1-1/4" length x 13/16" width x 1-1/8" height. Use with one #8-32 x 1" type screw. Use with one #8-32 x 1" type screw.
Amerock Village Classics BP19321WN Birdcage Oval Cabinet Knob Amerock Manor Egg BP26127ORB Cabinet Knob Amerock Allison BP176CAE Cabinet Pull
Knob with 2-9/16" length x 7/8" width x 1-1/2" height. Use with one #8-32 x 1" type screw. Use with one #8-32 x 1" type screw. Pull with back plate and 3" center, 5-9/16" length x 1" width x 1-1/4" height. Use with two #8-32 x 1" type screws.
Amerock Inspirations BP1590G10 Plain Cabinet Pull Amerock Inspirations BP1585ORB Round Rope Cabinet Knob Mintcraft Imperial CH-090 Self-Closing Cabinet Hinge
Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws. Knob with 1-1/4? (32mm) L x 1-1/16? (27mm) H. Screw Size(s): #8-32 x 1?L machine screw. 3/8" inset with screws. 2 pieces.
Amerock BP19001SS Bow Cabinet Pull Mintcraft CH-222 Decorative Overlay Cabinet Hinge Mintcraft CH-224 Decorative Overlay Cabinet Hinge
Pull with 3" center, 3-21/32" length x 3/8" width x 1-3/16" height. Use with two #8-32 x 1" type screws. 3/8" hinge with screws. 2 pieces. 3/8" hinge with screws. 2 pieces.
Amerock Revitalize BP55343ORB Cabinet Pull Amerock Inspirations BP1590WID Plain Cabinet Pull Prime Line U-9941KA Cam Lock
3-5/8" length x 5/8" width x 1-5/16" height. Use two #8 - 32 x 1" type screw. Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws. Stainless steel face. Plated diecast housing and steel cams can be mounted to metal or wood doors and drawers from 5/16" thick. 5/8"D x 2"L. Keyed locking for maximum security. Uses Yale Y-11 keyway. Includes 1 lock, 3 cams, 1 trim collar, 1 spur washer, 2 rotation washers, 1 lock nut, and 2 keys.
Mintcraft C893CH Round Mushroom Cabinet Knob Amerock Mulholland BP53029G10 Round Traditional Cabinet Knob Prime-Line U 9943 Drawer and Cabinet Lock
Easy to match any decor. 1-3/8" diameter. Includes screws. Knob with 1-1/4" length x 13/16" width x 1-1/8" height. Use with one #8-32 x 1" type screw. Prime-Line Drawer and Cabinet Lock, Suitable For Use With: 9/16 in Thickness Metal or Wood Doors or Drawers, Keyed Key, 2 Keys, Yale Y-11 Keyway, Die Cast/Steel, Stainless Steel, Includes: (3) Cams, (1) Trim Collar, (1) Spur Washer, (2) Rotation Washers and (1) Lock Nut, 3/4 in Diameter X 7/8 in Length Cylinder
National Hardware V826 Adjustable Drawer Lock National Hardware VKA826 Adjustable Drawer Lock DRAWER PULL 3IN ELEGANT BRASS
DRAWER LOCKS BRS
Our Price: $4.99
DRAWER LOCKS BRS
Our Price: $4.99
National Hardware Drawer Lock, Adjustable, Series: V826, Suitable For Use With: 3/4 in Drawers, Keyed Key, Die Cast Zinc, Steel, Brass, For Residential Applications National Hardware Drawer Lock, Adjustable, Series: VKA826, Suitable For Use With: 3/4 in Drawers, Keyed Key, Die Cast Zinc, Steel, Brass, For Residential Applications Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish.
Mintcraft C893BNI Round Mushroom Cabinet Knob KNOB 1-1/4IN OILRUB BRONZE    Prime Line R 7144 Drawer Track Repair Kit
Easy to match any decor. 1-3/8" diameter. Includes screws. Knob with 1.286" diameter x 1.222" height. Use one #8 - 32 x 1" type screw. Wood track, polyethylene guides and side saddles, steel angle brackets to support front of track, designed to replace most wood track systems. Top or bottom mount installations, restores smooth operation to track mounted drawers. 24" track may be cut down to fit.
TURNTABLE LAZY SUSAN 6IN 500LB Mintcraft Traditional Classics SF4013P-32PC Round Scroll Cabinet Knob Prime Line U-9943KA Cam Lock
Use for table and countertops or inside cabinets. Easy to match any decor.  1-1/4" diameter. Includes screws. Stainless steel face. Plated diecast housing and steel cams can be mounted to metal or wood doors and drawers from 9/16" thick. 7/8"D x 2"L. Keyed locking for maximum security. Uses Yale Y-11 keyway. Includes 1 lock, 3 cams, 1 trim collar, 1 spur washer, 2 rotation washers, 1 lock nut, and 2 keys.
Prime Line U 9945 Drawer and Cabinet Lock Prime Line U-9947KA Cam Lock Knape & Vogt 1175P ZC 20 Light Duty Single Track Drawer Slide
Stainless steel face. Plated diecast housing and steel cams can be mounted to metal or wood doors and drawers from 13/16" thick. 1-1/8"D x 2"L. Keyed locking for maximum security. Uses Yale Y-13 keyway. Includes 1 lock, 3 cams, 1 trim collar, 1 spur washer, 2 rotation washers, 1 lock nut, and 2 keys. Keyed locking unit for added security. Fits 7/8" hole. 5/16" bolt throw. Includes 1 lock, 2 keys and installation screws. Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
Knape & Vogt 1175P ZC 22-5/8 Light Duty Single Track Drawer Slide Amerock Hint of Heritage BP1466G10 Round Cabinet Knob Amerock Inspirations BP1590ORB Plain Cabinet Pull
Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Use with one #8-32 x 1" type screw. Metal pull with 3" center, 5.625" length x 0.688" width x 1" height. Use with two #8-32 x 1" type screws.
Knape & Vogt 1805HWH400 Euro Self-Close Drawer Slide Shepherd 9548 Square Lazy Susan Turntable Amerock Kane BP53700G10 Round Cabinet Knob
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc. Knob with 1-1/4" diameter x 1-1/4" height. Use with one #8-32 x 1" type screw.
Prime Line U 9946 Drawer and Cabinet Lock Prime Line R 7137 Monorail Drawer Track Kit SLIDE DRWR 75LB 300MM WHT 12IN
Plated die-cast housing and steel cams can be mounted to metal or wood door/drawer from 1/2" to 1" thick. Keyed locking for maximum security. Includes 1 each; lock, trim collar, spur washer and lock nut, 3 each; cams, rotation washers and keys. Prefix U on factory number denotes new Defender Security packaging. Galvanized steel track; rear support bracket with nylon rollers. 75 lb. test rated; requires 1-1/4'' clearance for installation. Track may be cut down for shorter drawer and can be used for top or bottom mount installations. Monorail design. Contents: 1 track; 1 roller guide; 1 rear mount bracket; 1 left-hand roller; 1 right hand roller; 1 set of installation fasteners. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
Amerock Revitalize BP55343G10 Cabinet Pull Amerock BP7329G9 Self-Closing Variable Overlay Cabinet Hinge Knape & Vogt 1805HWH550 Euro Self-Close Drawer Slide
3-5/8" length x 5/8" width x 1-5/16" height. Use two #8 - 32 x 1" type screw. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #5 O.H. x 5/8" and (3) #5 F.H. x 1/2" screws. 2-3/4"L x 2"W x 3/4"H. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1175P ZC 24 Light Duty Single Track Drawer Slide Knape & Vogt 1805HWH500 Euro Self-Close Drawer Slide Amerock Mulholland BP53030ORB Square Cabinet Pull
Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Pull with 3" center. 3-3/4" length x 3/4" width x 1-1/8" height. Use with two #8-32 x 1" type screws.
Prime Line U 9940 Mailbox Lock Knape & Vogt 1805HWH450 Euro Self-Close Drawer Slide Mintcraft Imperial CH-092 Self-Closing Cabinet Hinge
Diecast 3/4" cylinder with brass front plate, brass pins and spring steel locking clip. Multi-cam assortment to eliminate stocking individual locks. Replaces American, Florence, Miami-Carey, Bommer and Auth cams. All cylinders rotate 90 degrees counter clockwise to open. Includes 5 cams, 1 each with 2 keys. Prefix U on factory number denotes new Defender Security packaging. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". 3/8" inset with screws. 2 pieces.
Mintcraft Traditional Classics SF657-10B Round Cabinet Knob Mintcraft CH-180 Decorative Cabinet Hinge Mintcraft Imperial CH-094 Self-Closing Cabinet Hinge
Easy to match any decor. 1-1/4" diameter. Includes screws. 3/8" hinge with screws. 2 pieces. 3/8" inset with screws. 2 pieces.
Mintcraft Imperial CH-095 Self-Closing Cabinet Hinge Prime Line U-9945KA Drawer and Cabinet Lock Toolbasix 6298343-3L Showcase Lock
3/8" inset with screws. 2 pieces. Stainless steel face. Plated diecast housing and steel cams can be mounted to metal or wood doors and drawers from 13/16" thick. 1-1/8"D x 2"L. Keyed locking for maximum security. Uses Yale Y-13 keyway. Includes 1 lock, 3 cams, 1 trim collar, 1 spur washer, 2 rotation washers, 1 lock nut, and 2 keys. Fits up to 1/4" thick metal, wood, or sliding glass, gun case and showcase doors. Includes keys.
Mintcraft Traditional Classics SF4013P-32AN Round Scroll Cabinet Knob Prime-Line U 9949 Showcase Window Key Lock National Hardware N183-756 Adjustable Utility Lock
Easy to match any decor.  1-1/4" diameter. Includes screws. Prime-Line Showcase Window Key Lock, Suitable For Use With: Upto 5/16 in Thickness Glass, Keyed Key, 2 Keys, Steel, Chrome Plated, 5-1/2 in Overall Length, 9/16 in Overall Depth, Includes: Lock and Adjustable Bar National Hardware Utility Lock, Adjustable, Series: V825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Different Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/4 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 0.89 in Overall Depth, Die Cast Zinc, Steel, Chrome Plated, ANSI E07262, BHMA A156.11
National Hardware V826 Adjustable Utility Lock National Hardware N185-272 Adjustable Utility Lock National Hardware N185-280 Adjustable Utility Lock
National Hardware Utility Lock, Adjustable, Series: V826, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Different Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/2 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 1.15 in Overall Depth, Die Cast Zinc, Steel, Chrome Plated, ANSI E07262, BHMA A156.11 National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, Y13 Yale, B1 Cole Keyway, 1/4 in Crossbore, Die Cast Zinc, Steel, Black, Chrome Plated, For Residential Applications National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, Y13 Yale, B1 Cole Keyway, 1/2 in Crossbore, Die Cast Zinc, Steel, Black, Chrome Plated, For Residential Applications
National Hardware VKA828 Adjustable Showcase Lock National Hardware N192-476 Adjustable Utility Lock National Hardware N192-484 Adjustable Utility Lock
SHOWCASE LOCKS CHROME
Our Price: $5.99
National Hardware Showcase Lock, Adjustable, Series: VKA828, Suitable For Use With: 1/4 in Thickness Doors, Keyed Alike Key, 4-1/2 in Crossbore, Tumbler Lock Pin, Steel Bar, Die Cast Zinc Body, Solid Brass Keyway, Chrome Plated, For Residential and Locks Display Cases, Showcase Doors and All Sliding Glass, Wood or Metal National Hardware Utility Lock, Adjustable, Series: V825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Different Key, Y13 Yale, B1 Cole Keyway, 3/4 in Crossbore, Die Cast Zinc, Steel, Chrome Plated, For Residential Applications National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 3/4 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 1.39 in Overall Depth, Die Cast Zinc, Steel, Chrome Plated, ANSI E07262, BHMA A156.11
National Hardware N239-152 Adjustable Utility Lock National Hardware N239-178 Adjustable Utility Lock National Hardware N239-194 Adjustable Utility Lock
UTILITY LOCKS 1/4IN BRS
Our Price: $5.99
UTILITY LOCKS 1/2IN BRS
Our Price: $5.99
UTILITY LOCKS 3/4IN BRS
Our Price: $5.99
National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/4 in Crossbore, Die Cast Zinc, Steel, Brass, For Residential Applications National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 1/2 in Crossbore, Die Cast Zinc, Steel, Brass, For Residential Applications National Hardware Utility Lock, Adjustable, Series: VKA825, Suitable For Use With: Locking Wood or Metal Cabinet Doors and Drawers, Keyed Alike Key, 2 Keys, Y13 Yale, B1 Cole Keyway, 3/4 in Crossbore, 2.33 in Overall Length, 0.62 in Overall Width, 1.39 in Overall Depth, Die Cast Zinc, Steel, Brass, ANSI E07262, BHMA A156.11
LOCK UTILITY BRASS 1/2IN      LOCK UTILITY BRASS 1/4IN      Amerock BP7565BB Self-Closing Partial Wrap Around Cabinet Hinge
UTILITY LOCKS 1/2IN BRS
Our Price: $5.99
UTILITY LOCKS 1/4IN BRS
Our Price: $5.99
National Hardware Door/Drawer Utility Lock, Series: V825, Different Key, Key Number: Yale Y13 or Cole B1, 1/2 in Crossbore, Steel/Die-Cast Zinc, Brass, Includes: (2) Keys, Standards: ANSI Specified, BHMA A156.11, For Locking Wood or Metal Cabinet Doors and Drawers National Hardware Door/Drawer Utility Lock, Series: V825, Different Key, Key Number: Yale Y13 or Cole B1, 1/4 in Crossbore, Steel/Die-Cast Zinc, Brass, Includes: (2) Keys, Standards: ANSI Specified, BHMA A156.11, For Locking Wood or Metal Cabinet Doors and Drawers Amerock Cabinet Hinge, Self-Closing, Partial Wrap Around, 3 Holes, 2-1/4 in Door Leaf Length, 1-3/4 in Door Leaf Width, Face Mounting, Steel, Burnished Brass, With 3/8 in Inset, 19.05 mm Projection
Amerock BP7328G9 Self-Closing Cabinet Hinge Amerock Kane BP53702G10 Transitional Cabinet Pull Prime-Line R 7321 Drawer Track Guide and Glide
Amerock Cabinet Hinge, Self-Closing, 3 Holes, 2-3/4 in Door Leaf Length, 2 in Door Leaf Width, Face Mounting, Steel, Sterling Nickel, BHMS Approved, KCMA Certified, With 3/8 in Inset 4-1/2" length x 3/4" width x 1-1/8" height. Use two #8-32 x 1" type screws. Used on furniture drawer systems; for dressers, hutches and night stand drawers. Opening for metal track on larger piece measures 15/16" x 3/32". Kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4" x 14-1/2 ga.), and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8").
LOCK UTILITY BRASS 3/4IN      LOCK SHOWCASE CHM 4-1/2IN     Mintcraft Modern CH-115 Self-Closing Cabinet Hinge
Fits max 3/4" thick. Designed for locking wood or metal cabinet doors and drawers. Yale Y13 or Cole B1 key blank. Die-cast zinc body. Bar, face plate and parts made of steel. Visual-pack. Locks display cases, showcase doors and all sliding glass, wood or metal doors up to 1/4" thick. Die-cast zinc lock body; steel locking bar; and solid brass keyway and tumblers. 3/8" inset with screws. 2 pieces.
Mintcraft Imperial CH-093 Self-Closing Cabinet Hinge Amerock Mulholland BP53030G10 Square Cabinet Pull Amerock Inspirations BP1584ORB Rope Cabinet Pull
3/8" inset with screws. 2 pieces. Pull with 3" center. 3-3/4" length x 3/4" width x 1-1/8" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4-1/8" length x 7/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish.
Prime Line U 9942 Drawer and Cabinet Lock Amerock BP19009SS Cabinet T- Knob Prime Line S-4648 Mail Box Lock
Plated die-cast housing and steel cams can be mounted to metal or wood door/drawer from 1/2" to 1" thick. Keyed locking for maximum security. Includes 1 each; lock, trim collar, spur washer and lock nut, 3 each; cams, rotation washers and keys. Prefix U on factory number denotes new Defender Security packaging. Knob with 50mm length x 12mm width. Use with one #8-32 x 1" type screw. Fits Bommer, Auth-Electric, and United. 7/8" diameter threaded body. Used on pedestal style mail boxes. Includes (1) 5 pin cylinder, 1 lock, 3 cams, attachment nut, and 2 keys.
Amerock Essential'Z BP9365G10 Cup Cabinet Pull Amerock Allison 543 Round Cabinet Knob Amerock Brass and Sterling Traditions BP1300ORB Traditional Cabinet Pull
Pull with 2-1/2" center, 4-1/8" length x 1" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish. Knob with 1-3/16" height. Use with one #8-32 x 1" type screw. Metal pull with 3" center, 1.0625" height. Use with two #8-32 x 1" type screws.
Mintcraft Modern CH-112 Self-Closing Cabinet Hinge Mintcraft Modern CH-113 Self-Closing Cabinet Hinge Mintcraft Modern CH-116 Self-Closing Cabinet Hinge
3/8" inset with screws. 2 pieces. 3/8" inset with screws. 2 pieces. 3/8" inset with screws. 2 pieces.
Prime Line S-4634 Mail Box Lock National Hardware V699 Traditional Cupboard Turn Prime-Line U 9950KA Drawer and Cabinet Lock
Multi-purpose lock. Key will not remove in unlocked position. Uses Hudson keyway; ILCO 1562 (98X). Includes (1) 5 pin cylinder, 1 clip, 5 cams, and 2 keys. National Hardware Cupboard Turn, Series: V699, Traditional, Cold Rolled Steel, Brass, Includes: Screws, 1-1/4 X 1-3/4 in Size, For used to secure doors on wood cupboard and cabinets 3/4" diameter, 1-3/8" lock fits up to a 1" thick door panel. Complete with 3 cam assortment. 90 and 180 degree rotation washers included.
Prime-Line S 4125 Mail Box Lock Prime-Line S 4127 Mail Box Lock Prime-Line S 4128 Mail Box Lock
Prime-Line Mail Box Lock, Suitable For Use With: Bommer Brand Gangboxes, Keyed Key, 2 Keys, Hudson Keyway, 5 Pins, 7/8 in Overall Depth, Die Cast/Steel, Nickel Plated, Includes: Die Cast Cylinder With Plated Face, Brass Pins, Plated Steel Cams and Spring Steel Locking Clips, 1-7/32 in Bolt Throw Prime-Line Mail Box Lock, Suitable For Use With: Boomer Mailbox Doors, Keyed Key, 2 Keys, Hudson Keyway, 5 Pins, Tumbler Lock Pin, 7/8 in Overall Depth, Die Cast, Nickel Plated, Includes: Die Cast Cylinder With Plated Face, Brass Pins, Plated Steel Cams and Spring Steel Locking Clips, 13/16 in Bolt Throw Prime-Line Mail Box Lock, Suitable For Use With: Auth Electric Locks, Keyed Key, 2 Keys, Hudson Keyway, 5 Pins, Tumbler Lock Pin, 1/4 in Overall Depth, Die Cast, Nickel Plated, Includes: Die Cast Cylinder With Plated Face, Brass Pins, Plated Steel Cams and Spring Steel Locking Clips, 1-3/32 in Bolt Throw
Prime-Line S 4129 Mail Box Lock Prime-Line S 4130 Mail Box Lock Prime-Line S 4134 Mail Box Lock
Prime-Line Mail Box Lock, Suitable For Use With: American Device Gangboxes, Keyed Key, 2 Keys, Hudson Keyway, 5 Pins, Tumbler Lock Pin, 7/16 in Overall Depth, Die Cast, Nickel Plated, Includes: Die Cast Cylinder With Plated Face, Brass Pins, Plated Steel Cams and Spring Steel Locking Clips, 1-7/16 in Bolt Throw Prime-Line Mail Box Lock, Suitable For Use With: Florence Apartment Style or Commercial Gangbox Mailbox Systems, Keyed Key, 2 Keys, Hudson Keyway, 5 Pins, Tumbler Lock Pin, 11/32 in Overall Depth, Die Cast/Steel, Nickel Plated, Includes: Die Cast Cylinder With Plated Face, Brass Pins, Plated Steel Cams and Spring Steel Locking Clips Prime-Line Mail Box Lock, Suitable For Use With: Miami Carey Gangboxes, Keyed Key, 2 Keys, Hudson Keyway, 5 Pins, Tumbler Lock Pin, 17/64 in Overall Depth, Die Cast, Nickel Plated, Includes: Die Cast Cylinder With Plated Face, Brass Pins, Plated Steel Cams and Spring Steel Locking Clips, 13/16 in Bolt Throw
Prime-Line S 4136 Mail Box Lock Prime-Line S 4137 Mail Box Lock Prime-Line S 4140 Mail Box Lock
Prime-Line Mail Box Lock, Suitable For Use With: Dura-Steel Gangboxes, Keyed Key, 2 Keys, Hudson Keyway, 5 Pins, Tumbler Lock Pin, 17/64 in Overall Depth, Die Cast, Nickel Plated, Includes: Die Cast Cylinder With Plated Face, Brass Pins, Plated Steel Cams and Spring Steel Locking Clips, 3/4 in Bolt Throw Prime-Line Mail Box Lock, Suitable For Use With: Jensen and General Gangboxes, Keyed Key, 2 Keys, Hudson Keyway, 5 Pins, Tumbler Lock Pin, 19/64 in Overall Depth, Die Cast/Steel, Nickel Plated, Includes: Die Cast Cylinder With Plated Face, Brass Pins, Plated Steel Cams and Spring Steel Locking Clips, 13/16 in Bolt Throw Prime-Line Mail Box Lock, Suitable For Use With: Florence, Miami Carey, Bommer and American Device Gangboxes, Keyed Key, 2 Keys, Hudson Keyway, 5 Pins, Tumbler Lock Pin, 9/32 in Overall Length, Die Cast/Steel, Nickel Plated, Includes: (5) Cams, Nickel Plated Face, Brass Pins and Spring Steel Locking Clip, 1-3/32 in Bolt Throw
Prime-Line U 9953KA Drawer and Cabinet Lock Prime Line U 9944 Drawer and Cabinet Lock Mintcraft Modern CH-117 Self-Closing Cabinet Hinge
3/4" diameter, 1-3/8" lock fits up to a 1" thick door panel. Complete with 3 cam assortment. 90 and 180 degree rotation washers included. Plated die-cast housing and steel cams can be mounted to metal or wood door/drawer from 1/2" to 1" thick. Keyed locking for maximum security. Includes 1 each; lock, trim collar, spur washer and lock nut, 3 each; cams, rotation washers and keys. Prefix U on factory number denotes new Defender Security packaging. 3/8" inset with screws. 2 pieces.
National Hardware V552 Flush/Full Inset Back Flap Hinge CATCH DOUBLE ROLLER ZINC 10PK Amerock Bar Pulls BP40515ORB Transitional Cabinet Pull
National Hardware Back Flap Hinge, Flush/Full Inset, Series: V552, 0.075 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, Surface, Wall Mounting, Fasteners: Screws, 3.482 in Overall Width, Hot Rolled Steel, Zinc Plated, For Residential Applications Polybagged. Pull with 3" center, 5-3/8" length x 1/2" width x 1-3/8" height. Use with two #8-32 x 1" type screws.
Knape & Vogt 1284PWH400 Euro Roller Slide National Hardware V628 Flush/Full Inset Cabinet Spring Hinge Knape & Vogt 1284PALM500 Euro Roller Slide
SPRING HINGES 2IN BRS
Our Price: $7.59
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". National Hardware Cabinet Spring Hinge, Flush/Full Inset, Series: V628, 6 Holes, 0.14 in Hole Diameter, 0.04 in Leaf Thickness, 1.91 in Door Leaf Length, 1.91 in Frame Leaf Length, Removable Pin, 0.56 in Diameter Pin, Surface, Wall Mounting, 2.27 in Overall Width, 0.56 in Overall Depth, Steel, Brass Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1284PWH450 Drawer Slide Amerock TMPMULTI Cabinet Door and Drawer Template Knape & Vogt 1260P-16 Light Duty Drawer Slide
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Alignment guide for mounting cabinet knobs and pulls on cabinet drawers and doors. For standard pull mounting of 3" (76mm), 3-3/4" (96mm), and 5" (128mm) hole spacing. Includes: (1) template for drawers, (1) template for doors, (1) drill bit and Easy to read instructions. Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
KNOB 1-1/2IN 38MM POL CHROME  KNOB STN NKL 1-3/4IN DIA      Amerock BP2811J2314 2-Way Concealed Face Frame Cabinet Hinge
Use with one #8-32 x 1" type screw. Includes two different screw lengths for your convenience. Designed for cabinet doors and drawers from 5/8 inch to 1-1/2 inch thick. Provides easy opening and closing of drawers and cabinet doors. Truss head machine screw included. 1-3/4" Dia. Visual-pack. Add smooth, quiet action and lock-in place adjustment to any face frame cabinet.
Knape & Vogt 1300P ZC 12 Drawer Slide Knape & Vogt 1284PALM550 Euro Roller Slide Amerock Essential'Z BP9362G10 Subtle Arch Cabinet Pull
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Pull with 5" center, 7-3/16" length x 1/2" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish.
Knape & Vogt 1284PWH550 Drawer Slide Knape & Vogt 1284PWH500 Drawer Slide Knape & Vogt 1260P-18 Light Duty Drawer Slide
Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
National Hardware V699 Traditional Cupboard Turn Prime-Line U 9953 Drawer and Cabinet Lock Prime Line U 10666 Drawer and Cabinet Lock
National Hardware Cupboard Turn, Series: V699, Traditional, Cold Rolled Steel, Nickel Plated, Includes: Screws, 1-1/4 X 1-3/4 in Size, For used to secure doors on wood cupboard and cabinets Prime-Line Drawer and Cabinet Lock, Suitable For Use With: 1 in Thickness Door Panel, Keyed Key, Yale Y-11 Keyway, Die Cast, Brass, Includes: (3) Cams, (1) Trim Collar, (1) Spur Washer, (2) Rotation Washers and (1) Lock Nut, 3/4 in Diameter X 1-3/8 in Length Cylinder Fits up to a 7/8" thick panel. Mortise installation. Wafer style cylinder. Includes 1 lock, 1 keeper, and 2 keys.
Knape & Vogt 1300P ZC 18 Drawer Slide Knape & Vogt 1300P ZC 20 Drawer Slide Knape & Vogt 1300P ZC 14 Drawer Slide
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1300P ZC 16 Drawer Slide Knape & Vogt 1260P-20 Light Duty Drawer Slide Knape & Vogt 1260P-22 Light Duty Drawer Slide
Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt PBP10016 Precision Drawer Slide Amerock BP4613D14 Frameless Concealed Cabinet Hinge Prime-Line S 4533 Mail Box Lock With Cover
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". 110 degree, full inset, frameless hinge. 5 cam selection. Includes dust cover face for exterior application. Uses Hudson keyway, and turns 90? clockwise to open.
Amerock BP2811C1314 2-Way Concealed Self-Closing Frame Cabinet Hinge National Hardware V550 Flush/Full Inset Chest Hinge National Hardware V552 Flush/Full Inset Back Flap Hinge
Amerock Cabinet Hinge, 2-Way, Adjustable, Concealed, Self-Closing Frame, Nickel Plated, BHMS Approved, KCMA Certified, 1-1/4 in Overlay, 1-7/9 in Hole Pattern, 1/2 in Cup Depth, 105 deg Opening Angle National Hardware Chest Hinge, Flush/Full Inset, Series: V550, 8 Holes, 0.2 in Hole Diameter, 0.08 in Leaf Thickness, 1-1/2 in Door Leaf Length, 1-1/2 in Frame Leaf Length, Removable Pin, 0.12 in Diameter Pin, Wall Mounting, 15 lb Load Capacity, 1.6 in Overall Length, 3.21 in Overall Width, Hot Rolled Steel, Zinc Plated National Hardware Back Flap Hinge, Flush/Full Inset, Series: V552, 0.23 in Hole Diameter, 0.07 in Leaf Thickness, 2 in Door Leaf Length, 2 in Frame Leaf Length, Removable Pin, 0.19 in Diameter Pin, Surface, Wall Mounting, Fasteners: Screws, 2.11 in Overall Length, 5.38 in Overall Width, Hot Rolled Steel, Zinc Plated, For Residential Applications
HINGE CHEST BRASS 1-1/2X3/4IN KNOB STN NKL 1-3/4IN DIA      KNOB ORB 1-3/4IN DIA
KNOBS 1-3/4IN DIA ORB
Our Price: $8.99
National Hardware Chest Hinge, Series: V550, 8 Holes, 0.2 in Hole Diameter, 0.08 in Leaf Thickness, 3/4 in Frame Leaf Width, Tight Pin, 0.12 in Dia Pin, 15 lb Load Capacity, 3.21 in Overall Length, 1-1/2 in Overall Width, Hot Rolled Steel, Brass, For Chests, Cabinets and Storages Boxes Designed for cabinet doors and drawers from 5/8 inch to 1-1/2 inch thick. Provides easy opening and closing of drawers and cabinet doors. Truss head machine screw included. 1-3/4" Dia. Visual-pack. Designed for cabinet doors and drawers from 5/8 inch to 1-1/2 inch thick. Provides easy opening and closing of drawers and cabinet doors. Truss head machine screw included. 1-3/4" Dia. Visual-pack.
KNOB BRASS 1-3/4IN DIA        Knape & Vogt PBP10018 Precision Drawer Slide Knape & Vogt 1300P ZC 22 Drawer Slide
KNOBS 1-3/4IN DIA BRS
Our Price: $8.99
Designed for cabinet doors and drawers from 5/8 inch to 1-1/2 inch thick. Provides easy opening and closing of drawers and cabinet doors. Truss head machine screw included. 1-3/4" Dia. Visual-pack. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18".
Amerock BP4611A14 Frameless Concealed Mortise Full Overlay Cabinet Hinge Amerock Inspirations BP15862G10 3-Ring Round Cabinet Knob Amerock Inspirations BP15862ORB 3-Ring Round Cabinet Knob
110 degree, full inset, frameless hinge. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
Amerock Allison TEN174G10 Cabinet Pull Set Knape & Vogt 1300P ZC 24 Drawer Slide Amerock Allison TEN53005G10 Cabinet Knob Set
Transitional style pull with 3" center,  4-1/2 length  x 5/8" width  x 1" height. Use with two #8-32 x 1" type screws. Designed for medium duty applications where a lever release is desired. For kitchen cabinet, vanity, desk and store fixture applications. Height: 3".  Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop lever that prevents accidental drawer removal.  Zinc-plated cold rolled steel. Ball bearing nylon rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw.
Knape & Vogt PBP10020 Precision Drawer Slide Amerock Advantage BP4235G9 Cup Eclectic Cabinet Pull HINGE INSET 3/8IN SATIN NICKEL
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24". Pull with 3" center, 3-1/4" length x 1-3/4" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2")
OVERLAY HINGE VARI SAT NICKEL PULL 3IN 76MM POLISH CHROME   KNOB 1-5/16IN BRUSHED CHROME
3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. Knob with 1-5/16" diameter x 7/8" height. Use with one #8-32 x 1" type screw.
KNOB 1-1/4IN POLISHED BRASS   Shepherd 9549 Round Lazy Susan Turntable Knape & Vogt PBP10022 Precision Drawer Slide
1-1/4" height x 1-1/4" width, 1-1/8" projection. Zinc base. 8-32 x 1" screws included. Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc. Direct access mounting holes, precision ball bearings, telescopic action, non-handed design, and lever disconnect. Includes screws for installation. Height: 1-1/8". Clearance required: 1/2" plus 1/32" minus 0 each side. Maximum drawer width 24".
Mintcraft R684-24 Self-Closing Drawer Slide HINGE INSET 3/8IN SATIN NICKEL PULL 3IN 76MM POLISHED BRASS
Stamped steel material 1.2mm thickness. Load rating 75 pounds, with 8 screws. Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws.
TURNTABLE LAZYSUSAN 12IN1000LB Amerock Allison TEN53005ORB Cabinet Knob Set PULL 3IN 76MM SATIN NICKEL
Use for table and countertops or inside cabinets. Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Pull with 3" center, 5-1/16" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws.
Knape & Vogt 8400P14 Full Extension Drawer Slide Knape & Vogt 8400P12 Full Extension Drawer Slide Knape & Vogt 8400P16 Full Extension Drawer Slide
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions.
Amerock Allison TEN53002G10 Cabinet Knob Set PULL 3IN 76MM SATIN NICKEL    PULL 3IN 76MM OILRUB BRONZE
1-3/16" diameter knob in a 10 pack. Use with one #8-32 x 1'' type screw. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. 3? Center-to-center. 1-1/4? projection, 3-3/8? length, 1/2? width.
Knape & Vogt 8400P18 Full Extension Drawer Slide Knape & Vogt 8400P20 Full Extension Drawer Slide Amerock Allison TEN53003G10 Cabinet Pull Set
Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw).
KNOB 1-1/4IN OILRUB BRONZE    Knape & Vogt 8400P22 Full Extension Drawer Slide Prime-Line R 7221 Drawer Track Guide and Glide 2-7/16 in W
Knob with 1-1/4? (32mm) L x 1-3/16? (30mm) H. Screw Size(s): #8-32 x 1?L machine screw. Medium-duty, precision slides for box drawer or pedestal file drawers up to 24" wide. For frame and frameless construction. May be used horizontal position with a reduced load rating of 30 pounds. Height:1-13/16" Clearance required: 1/2" plus 1/32" minus 0 each side. Features telescoping, full extension on precision steel ball bearings. 32mm hole pattern with direct access mounting. Lever disconnect for easy drawer removal. Ball retainer latch and ramps, for easy drawer insertion. Drawer adjustment without removal. Flexible mounting tabs self-adjust to side clearance. Metal ball retainer holds 3 bearings per inch of race for smooth and quiet motion. Polymer stop cushions. Non-handed. Packaged with screws and installation instructions. White, polyethylene.
KNOB 1-1/4IN OILRUB BRONZE    PULL 3-3/4IN OILRUB BRONZE    PULL 3-3/4IN 96MM SATIN NICKEL
Transitional style. 1-1/4" diameter x 1" height. Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw). Transitional style pull, 3-3/4? (96mm) mounting holes. 1? projection, 4-3/16? overall length, 19/13? width. Use with two #8-32 x 1" type screws.
KNOB 1-3/8IN OILRUB BRONZE    Knape & Vogt 8450FMP 16 Full Extension Soft Close Drawer Slide Knape & Vogt 8450FMP 18 Full Extension Soft Close Drawer Slide
Oversized, 1-3/8" diameter knob. Use with one #8-32 x 1'' type screw. Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16". Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16".
TURNTABLE LAZY SUSAN 4IN 300LB Amerock Allison TEN174ORB Cabinet Pull Set Knape & Vogt 8450FMP 20 Full Extension Soft Close Drawer Slide
Use for table and countertops or inside cabinets. Transitional style pull with 3" center,  4-1/2 length  x 5/8" width  x 1" height. Use with two #8-32 x 1" type screws. Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16".
Knape & Vogt 8450FMP 22 Full Extension Soft Close Drawer Slide Prime-Line R 7265 Socket Rear Drawer Track Amerock Reflections TEN1387G10 Cabinet Knob Set
Designed for use on box drawer applications up to 24" wide where the maximum weight load is not to exceed 100 pounds. Product features a "soft-close" module that eliminates drawer slamming. Clearance required: 1/2" plus 1/23" minus 0". Height: 1-13/16". Socket depth allows for front to back adjustment of the rail. Used on side mounted drawer track systems. Raw finish. Knob with 1-1/4" diameter x 1-1/16" height. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
Amerock Inspirations TEN1586G10 Cabinet Knob Set Amerock Essential'Z TEN26201G10 Cabinet Pull Set Amerock Inspirations TEN1586ORB Cabinet Pull Set
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Pull with 3" center, 5-1/4" length x 3/8" width x 1" height. Use with two #8-32 x 1" type screws. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
   
 
1