Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > COMPRESSORS & ACCESSORIES
Choose a sub category:
AIR COMPRESSORS AIR TOOLS AIR TOOL ACCESSORIES
AIR COMPRESSOR HOSES AIR COMPRESSOR HOSE FITTINGS BLOW GUNS
AIR COMPRESSOR ACCESSORIES SPRAY GUNS AIR TANKS
Sort By:
1
Tru-Flate 12-125 Hose Plug Tru-Flate 12-225 Air Line Plug Tru-Flate 12-235 Air Line Plug
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 12-325 Air Line Plug Tru-Flate 12-335 Air Line Plug Tru-Flate 21-133 Air Hose Fitting
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-595 Hose Adapter with Ball Socket Stanley THREADTAPE Thread Sealant Tape Tru-Flate 12-135 Air Line Nipple
All brass, corrosion resistant material. Connects FPT to FPT. With ball socket. Properly seals all male threaded connections to prevent air leaks. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-123 Air Hose Fitting Tru-Flate 21-535 Air Hose Bushing Tru-Flate 17-351 Ball Foot Direct Air Line Chuck
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.
Tru-Flate 21-143 Air Hose Fitting Tru-Flate 21-423 Barb Hose Splicer Tru-Flate 21-505 Air Line Coupling
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. Pipe couplings,thread adapters and bushings allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects FPT to FPT.
Tru-Flate 12-435 Air Line Plug Tru-Flate 12-527 Air Line Plug Tru-Flate 21-222 Air Hose Fitting
Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-147 Air Hose Fitting Tru-Flate 21-242 Air Hose Fitting Stanley 38F-14F Hexagonal Reducer Coupler
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Connects MPT to MPT. High quality corrosion resistant brass construction for long life. Pre-applied thread sealant for air tight connections on the male external threads.
Tru-Flate 12-605 Air Line Plug Tru-Flate 21-515 Air Line Coupling Plews 21-557 Drain Cock
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Pipe coupling allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects MPT to MPT. For use in low pressure applications. Hand tightening provides leak-proof metal to metal seal. Corrosion resistant brass.
Plews/Edelmann 12-227/6  Air Compressor Hose Fittings Stanley TIRE-14F Tire Chuck Tru-Flate 12-425 Air Line Plug
Plug 1/4". I/M x 3/8" MNPT. Plated steel; corrosion resistant steel for long life. Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 12-603 Air Line Plug Tru-Flate 21-467 Barb Hose Splicer Campbell Hausfeld ST127012AV Air Tool Oil
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. For use with all oil lubricated air tools. Helps maximize tool performance and increase tool life.
Stanley 38M-14M Hex Reducer Nipple Plews/Edelmann 12-611  Air Compressor Hose Fittings Tru-Flate 17-369 Ball Foot Direct Air Line Chuck
Connects  FPT to FPT. Use thread sealant tape on all male threads for air tight connections. Plug 3/8". TF x 1/4" FNPT. Has a built in shut off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
Tru-Flate 17-361 Ball Foot Direct Combination Air Line Chuck PLUG 3/8IN TF X 3/8IN FNPT    Senco PC0101 Air Tool Oil
Combination No. 17-350 chuck with 1/4" ID hose barb No. 21-123. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines comes directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Premium-grade oil formulated with high-quality paraffin distillate stocks. Contains carefully balanced rust and oxidation inhibitors. Lubricates Pneumatic tools, protects against corrosion and extends part life.
Stanley AP-38F Auto Hose Adapter Stanley AP-38M Auto Hose Adapter Stanley AP-14M Auto Hose Adapter
Plated steel construction with drag guard for job site durability and reliability. Large body size for maximum air flow and tool performance. Corrosion resistant steel for long life. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Eight ball coupler design for balanced, strong, secure connections.
3-IN-ONE 120046 Pneumatic Tool Oil Marvel Mystery MM080R Air Tool Oil With Childproof Cap Tru-Flate 12-705 Air Line Plug
Marksman spout for easy precision application. Professional grade formula. Lubricates and protects to extend tool life. Quickly removes gum and sludge. Prevents rust. Specially formulated for use in all piston type and rotary air tools, as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Stanley-Bostitch BTFP72333  Air Compressor Hose Swivel Plug - Male North American 9402 Speedway Air Inflation Kit Mintcraft FDQ910 Inflation Kit
Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections. Ideal for inflating toys, rafts, sports equipment and more. Includes 1/4" NPT female connector, 1/4" x 1/8" connector, inflation needle, tapered nozzle and extension tube. Use with any compressor and hose. Includes: inflation adapter, tapered inflation nozzle, inflation needle, tire nozzle.
Blaster 16-ATL Air Tool Lubricant SPLICER HOSE REUSABLE 1/4IN   Campbell Hausfeld ST125312AV Air Compressor Tool Oil
Lubricates and protects internal tool parts. Formulated for use with in-line oilers. Removes moisture and provides lubrication. Protects tools against high speeds and shock loads. Use on all pneumatic tools and equipment. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. High quality, non-detergent, single viscosity oil. Prolongs compressor life by reducing carbon build-up on valves.
HOSE AIR END REUSABLE 1/4IN   Tru-Flate 13-225 Air Line Coupler Tru-Flate 13-235 Industrial Air Line Coupler
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI.
SPLICER HOSE REUSABLE 3/8IN   Blaster 16-ATC Air Tool Conditioner COUPLER UNIVERSAL 1/4IN MPT
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Cleans and restores pneumatic tool parts. Breaks loose deposits that create friction. Reaches deep into small recesses to leave a protecting film of lubrication. Can be used as in-line lubricant. Removes moisture. An effective antifreeze. Protects tools from freezing down to -25 degreesF. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs.
COUPLER UNIVERSAL 1/4IN FPT   Tru-Flate 13-125 Air Line Coupler Tru-Flate 13-135 Air Line Coupler
Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 13-201 Coupler/Plug Set Tru-Flate 17-383 Dual Foot Direct Air Line Chuck Tru-Flate 41-300 Hose Repair Kit
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-225 1/4" Male NPT Plug and  No.13-235 1/4" Female NPT Coupler. Design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Built-in shut-off valve cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.  Extension for hard-to-reach dual wheel valves on tractors, trucks or bus. Contains all parts necessary to repair a direct air line hose assembly. Each kit contains: (1) Single Foot Air Chuck, 1/4" Female NPT, (1) Male Hose End 1/4" ID hose x 1/4" NPT, (1) Hose Splicer, 1/4" ID hose, (3) Band Style Hose Clamps, fits 3/8" ID hose
Stanley Industrial IHKIT-14F Hose Coupler Kit Stanley IC-14M Industrial Hose Adapter Stanley IC-14F Industrial Hose Adapter
Six hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Pre-applied thread sealant for air tight connections. Plated steel construction with drag guard for job site durability and reliability. Six ball coupler design for balanced, strong, secure connections. Corrosion resistant steel for long life.
Stanley HREPAIR-38 Hose Splice Kit Stanley-Bostitch BTFP72320  Air Compressor Hose FittingsSeries Coupler Stanley-Bostitch BTFP72321  Air Compressor Hose Coupler
Kit Includes: (1) 1/4" MPT x barbed hose splicer for 3/8" hose ; (1) barb x barb hose splicer for 3/8" hose &  (3) Clamps. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections.
Bostitch BTFP72327 Ball Drain Valve HOSE AIR END REUSABLE 1/2IN   SPLICER HOSE REUSABLE 1/2IN
Turn ball type drain valve. 1/4" NPT male thread. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Plews/Edelmann 18-603 Air Blow Guns Plews/Edelmann 18-319 Tru-Flate Air Safety Blow Guns Nati 9390 Air Hose 25 ft
Adjust from low air to a full volume flow. Recommended air pressure to 150 PSI maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all Industrial/Milton Design 1/4" coupler bodies. Vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Hang up hook and 1/4" NPT female inlet included. Meets OSHA regulation 1001 for 30 PSI "dead head'' pressure. Inlet Pressure - 150 PSI. Self storing design springs back into coiled shape. Rugged oil and abrasion resistant polyurethane construction. Leak resistant, 360 degree swivel brass end connectors. Spring bend restrictors prevent kinks near hose end. 1/4" NPT; maximum working pressure at 100 psi.
Plews/Edelmann 13-138 Hose Coupling Tru-Flate 21-605 Barb Air Line Swivel Marvel Mystery MM85R1 Air Tool Oil With Childproof Cap
Coupler 1/4". TF x 3/8" FNPT. Eliminates kinked and twisted air line hose by swiveling a full 360 degrees. Use on air lines, tools, and compressor connections to increase flexibility and convenience. 150 PSI maximum working pressure. Specially formulated for use in all piston type and rotary air tools, as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output.
Tru-Flate 13-325 Air Line Coupler Tru-Flate 13-335 Air Line Coupler Tru-Flate 17-353 Ball Foot Direct Clip On Air Line Chuck
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Combination No. 17-350 chuck with No. 17-355 chuck clip. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.
Plews 4-25E-RET Recoil Air Hose Plews/Edelmann 13-237 Hose Coupling Stanley TEE-14F Tee Fitting
Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree F to 120-degree F. 200 PSI. Yellow Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Stanley Tee Fitting, 1/4 in Nominal, FNPT End, Brass
HOSE AIR END REUSABLE 3/8IN   Tru-Flate 13-101 Coupler/Plug Set Tru-Flate 13-301 Coupler/Plug Set
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-125 1/4" Male NPT Plug and No.13-135 1/4" Female NPT Coupler. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-325 1/4" Male NPT Plug and No.13-335 1/4" Female Coupler.  Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Stanley 3WAY-RND 3-Way Round Air Line Manifold Bostitch Prozhoze Reusable Hose Repair Kit Mintcraft DZA019 Hose Coupler Set
Splits single air line into three for running multiple air tools. Use 3/8" male threaded inlet fitting for maximum performance. Aluminum. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. 3 piece 1/4" MPT quick plug; 1 piece 1/4" FPT quick plug; 1 piece 1/4"NPT quick coupler.
Stanley BTFP72330 Safety Blow Gun HOSE AIR END REUSABLE 1/4IN   HOSE AIR ED RUSBL W/SWVL 3/8IN
Safety blow gun. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Tru-Flate 17-373 Grip Tite Direct Air Line Chuck Tru-Flate 13-425 Air Line Coupler Tru-Flate 13-435 Air Line Coupler
Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks. Works like a ``quick coupler". Snaps onto any standard tire valve and stays put until released. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only.
Tru-Flate 41-125 3-Way 3-in-1 Air Line Manifold Tru Flate 18-143 Clip-On Safety Blow Gun Mintcraft CC970 Air Blow Gun
Supply three air tools from one source. Use on air hose end or as permanently fixed bench outlet. No need to disconnect/connect to use different tools. Three 1/4" NPT outlets and single 1/4" NPT inlet makes this a useful shop or bench accessory. Converts any standard ball foot tire chucks to a safety blowgun.  Vented nozzle and built-in pressure reduces limit nozzle pressure to a maximum of 30 PSI, with up to 150 PSI inlet pressure.  Conforms to No.1001 OSHA regulation. Epoxy finish. Die-cast body. 1/4" air inlet.
Senco PC0344 Compressor Oil HOSE AIR ED RUSBL W/SWVL 1/2IN Tru-Flate 13-537 Air Line Coupler
Recommended for all Senco oil splash compressors. Protects against corrosion. Lubricates to extend part life. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI.
Tru-Flate 13-203 Coupler/Plug Kit Plews/Edelmann 13-603 Hose Coupling Plews/Edelmann 13-605 Hose Coupling
(1) One Each:  1/4" FPT Coupler (13-235), 1/4" MPT Coupling (21-505), 1/4" MPT Plug (12-225) and 1/4" FPT Plug (12-235). Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Plews 576-25A Air Hose Plews/Edelmann 18-302 Tru-Flate Air Safety Blow Guns Tru-Flate 13-401 Coupler/Plug Set
Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends. Meets OSHA regulation 100-1 for 30 PSI "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body with hang-up hook, 1/4" NPT female inlet, and 4" extension. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-425 1/4" Male NPT Plug.  Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. No.13-435 1/4" Female Coupler - Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Tru-Flate 13-611 Air Line Coupler Tru-Flate 13-613 Air Line Coupler Tru Flate 18-207 Standard Blow Gun
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Oil resistant, soft replaceable rubber tip. Will not mar delicate surfaces. Ideal for leak proof seal against oil passages, fuel lines and carburetors when air pressure is needed for cleaning. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI.
Plews/Edelmann 18-231 Tru-Flate Air Blow Guns Tru Flate 18-233 Safety Blow Gun Tru-Flate 21-707 Safety Valve
Conforms to all Federal requirements related to OSHA, including noise level regulations. Tamper proof pressure reducers built into this gun limit nozzle pressure to 30 PSI or less when used with listed inlet pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast, epoxy finish body. Complete with hang-up hook and 1/4" female NPT inlet. Increased performance and yet still meets OSHA regulation 100-1 for 30 PSI 'dead head' pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Complete with hang-up hook and 1/4" NPT female inlet. Inlet pressure 150 PSI. Brass safety valves constructed to asme standards. Interchangeable with all other asme valves of the same size and pressure. 125 PSI.
Stanley UC38-14F Push-to-Connect Auto Hose Adapter Stanley UC38-14M Push-to-Connect Auto Hose Adapter Stanley-Bostitch BTFP72318  Air Compressor Hose Fittings Plug - Male
Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance. Pre-applied sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections.
Stanley-Bostitch BTFP72319  Air Compressor Hose Fittings Plug - Female Tru-Flate 13-527 Air Coupler HOSE AIR END REUSABLE 3/8IN
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Plews 4-50E-RET Recoil Air Hose Tru Flate 18-203 Standard Blow Gun Tru-Flate 12-537 Air Hose Plug
Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree F to 120-degree F. 200 PSI. Yellow Comfortable thumb lever valve control with handy hanger in lever and hanger hook. Compact one piece nozzle. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Bostitch Prozhoze Reusable Hose Repair Kit Plews/Edelmann 18-241 Air Blow Gun Kits COUPLER-PLUG SET 4PC
COUPLER-PLUG SET 4PC
Our Price: $13.99
Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. Interchangeable nozzles for cleaning and inflating. Complies with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Includes: standard nozzle, tapered inflator nozzle and ball inflator nozzle. Hi Flo Couplers and Plugs increase air flow to ensure tools will provide maximum torque and optimal performance. Push-to-connect design is made of light-weight T6 aluminum. Includes (1) Female Coupler, (1) Female Plug and (2) Male Plugs.
Tru-Flate 24-801 Air Line Pressure Gauge Nati 9411 Air Hose 25 ft HOSE AIR POLY BLUE 1/4INX25FT
PSI 0-200  0-14 kg/cm2; mounting back. Ideal for a wide range of home and job-site applications. 3/8". Simple and convenient storing, without taking away the needed length required on the job-site. 300 psi. Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI.
Tru-Flate 13-713 Air Line Coupler Plews 554-50A-10 Air Hose Plews 576-50A Air Hose
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Quality  multi-purpose air hose. Light weight, flexible, kink-resistant design. 300 PSI. Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends.
BLOWGUN SET 2PC               Plews/Edelmann 18-221 Tru-Flate Air Blow Guns Nati 9389 Air Hose 50 ft
BLOWGUN SET 2PC
Our Price: $15.99
Light-weight aluminum body with OSHA compliant safety nozzle. 40 CFM Combination of a blowgun and the siphon spray nozzle. Barbed siphon inlet fits 1/4 inch ID hose or tubing. Use for spray- cleaning engines, applying protective coating, etc. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Self storing design springs back into coiled shape. Rugged oil and abrasion resistant polyurethane construction. Leak resistant, 360 degree swivel brass end connectors. Spring bend restrictors prevent kinks near hose end. 1/4" NPT; maximum working pressure at 100 psi.
HOSE AIR 1/4INX25FT           Mintcraft Tire Inflator Gauge Plews 41-135 Air Line Regulator with Gauge
HOSE AIR 1/4INX25FT
Our Price: $16.99
Flexible Hybrid Polymer material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won?t work against you during operation and coils easily after use. It also offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed. Anodized aircraft aluminum ends. Max working pressure at 70 degrees Fahrenheit, 300 PSI. Die cast body and dial type gauge with rubber protector. Fitted with single clip-on connector. Air pressure: 0-220 PSI. Air inlet: 1/4'' NPT. Controls in-line air pressure for paint spray guns or other pneumatic tools. Helps keep air flow at exact operating pressures. Use where precise air flow is desired. Compact, light weight, allows for easy "on the tool" air adjustment. 16psi. NPT thread size is 1/4" on both the male and the female ends.
Nati 50059 Air Hose 25 ft Bostitch BTFP72326 Mini Regulator and Gauge Kit HOSE AIR 3/8X50FT
HOSE AIR 3/8X50FT
Our Price: $19.99
Extremely lightweight and flexible air hose provides ideal performance in all climates. Solid brass fittings: 1/4" - 18 NPT. Oil and abrasion resistant. Heavy duty braided reinforcement. Working temperature range from 30 to 150 degrees F. Maximum working pressure of 250 psi. Bostitch Regulator and Gauge Kit, Mini, 1/4 in FNPT, 15 gpm, 0 - 160 psi Ultra Air takes hybrid to a new level, offering increased cold weather flexibility over competitive hoses. When uncoiled, this hose lays flat making it easier to use with no interruption in air flow or tripping hazards. Lighter in weight than rubber and more flexible than PVC; features bend restrictors. Stays flexible, -40 to 150 degrees F. 300 PSI.
HOSE AIR 3/8INX25FT           Plews/Edelmann 41-101 Air Tool Oilers Mintcraft ATA-053-A Hose Plug
HOSE AIR 3/8INX25FT
Our Price: $19.99
Flexible Hybrid Polymer material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won?t work against you during operation and coils easily after use. It also offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed. Anodized aircraft aluminum ends. Max working pressure at 70 degrees Fahrenheit, 300 PSI. Compact oiler that fastens directly to the air tool.  Precisely meters proper amount of oil to the tool only when the tool is in use.  NO adjustments necessary 1/4" male NPT outlet, 1/4" female NPT inlet.  Use on all 3/8" and 1/2" air impact guns, air wrenches, body shop air tools and pneumatic hammers. Dependable male steel mechanical fitting is perfect for rapidly and securely separating air hoses.
Plews 12-50E Poly Air Hose HOSE AIR 1/4INX50FT           Nati 9412 Air Hose 50 ft
HOSE AIR 1/4INX50FT
Our Price: $23.99
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. Flexible Hybrid Polymer material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won?t work against you during operation and coils easily after use. It also offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed. Anodized aircraft aluminum ends. Max working pressure at 70 degrees Fahrenheit, 300 PSI. Ideal for a wide range of home and job-site applications. 3/8". Simple and convenient storing, without taking away the needed length required on the job-site. 300 psi.
Mintcraft CC910 Air Tool Accessory Kit Prohoze HOPB1450 Air Hose Tru-Flate 24-343 Manual Mini Air Line Filter
Includes: 1 piece tapered brass inflator; 1 piece inflation needle; 2 piece 1/4'' female brass plugs; 4 piece 1/4'' male brass plugs; 1 piece dual tire chuck; 1 piece pencil tire gauge; 1 piece brass blow gun; 1 piece brass safety nozzle. 2 piece male brass hose connectors; 1 piece 1/4" quick brass coupler. 1 piece air blow gun; 1 piece female brass hose connector. All weather flexibility with working temperature range of -40 degrees to 164 degrees F. Heavy duty reinforced braided hose designed with contractor in mind. 300 psi max working pressure with 900 psi burst strength for toughness and safety. End restraints designed for longer hose life. Used for all air line applications where efficient filtration is required for wear or failure of pneumatic components. Large filter element surface gives low-pressure drop and long element life. Polycarbonate bowl. Manual drain type. -10 degrees Fahrenheit to +175 degrees Fahrenheit operating temperature range.  20 SCFM, 5 micron element, 1 oz bowl capacity. 3.7" overall height.
Plews 576-100A-5 Air Hose Mintcraft ATA-052-1 Hose Plug Sta-Lube SL22133 Air Compressor Oil
Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends. High speed steel. Helps promote longer life in all types of reciprocating and rotary compressors. Solvent refined and clay filtered for long lasting, anti-foul operation. Cleans valve seat deposits and extends life.
HOSE AIR 3/8INX50FT           Tru-Flate 24-444 Mini Air Line Regulator with Pressure Gauge North American 7637 Speedway Air Ratchet Wrenches
HOSE AIR 3/8INX50FT
Our Price: $33.99
Flexible Hybrid Polymer material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won?t work against you during operation and coils easily after use. It also offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed. Anodized aircraft aluminum ends. Max working pressure at 70 degrees Fahrenheit, 300 PSI. Employs solid piston and balanced poppet for long lasting performance. Solid piston is impervious to most chemicals and a wide range of lubricating oils and greases. Fast reverse flow capability allows for installation where dual pressures are required. Two gauge ports are provided and a pressure gauge is included. 250 PSI max primary operating pressure and 2 to 125 PSI max secondary operating pressure. 13 SCFM, 2.9" overall height. 45 ft-lbs torque range. 4 cfm's at 90 psi. Minimum hose diameter is 3/8".
Stanley Industrial Air Compressor Regulator with Gauge Speedway 50180 Spray Gun REGULATR TOOL AT-HAND INLN AIR
Stanley Air Compressor Regulator, Industrial, 1/4 in NPTF, Includes: (1) Gauge Siphon feed type. Required pressure of 50-75 psi. Minimum 3.8" hose diameter. Allows custom pressure settings for various tools or applications. To set required pressure, turn the regulator up to the max 140 PSI and adjust downward to required pressure each time you change the pressure setting. Adjusts while in use. No need to stop working! Specs: Supply Pressure: Minimum 150 PSI, Maximum 400 PSI, Maximum Air Flow: 25 CFM at 125 PSI.
Stanley PREMOIL-4OZ Grade Pneumatic Tool Lubricant Prohoze HOPB14100 Air Hose Tru-Flate 41-175 Air Compressor Accessory Kit
Formulated for pneumatic tools. Blended using premium grade turbine oil. Formulated for high speed and temperature conditions. Has anti-wear additives specially formulated for cylinder type applications. Contains rust and oxidation inhibitors to prevent degradation of tool components. All weather flexibility with working temperature range of -40 degrees to 164 degrees F. Heavy duty reinforced braided hose designed with contractor in mind. 300 psi max working pressure with 900 psi burst strength for toughness and safety. End restraints designed for longer hose life. Kit contains all accessories needed to connect and use a tank-mounted air compressor. Includes: Couplers/Plugs for air line hose and air tool connections; Air line chuck for filling tire valves; Tire gauge, to check air pressure; Blowgun kit with multiple nozzles for general cleaning, drying, and clearing; Ball and tapered inflator nozzles for inflating toys and recreational equipment.
Plews 12-100E Air Hose Abbott Rubber 1502-38X50MM Air Hose 50 ft Stanley PREMOIL-20OZ Grade Pneumatic Tool Lubricant
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. Rubber hose, durable, abrasion resistant. Formulated for pneumatic tools. Blended using premium grade turbine oil. Formulated for high speed and temperature conditions. Has anti-wear additives specially formulated for cylinder type applications. Contains rust and oxidation inhibitors to prevent degradation of tool components.
AIR HOSE PROFLEX 1/4IN X 50FT AIR TANK PORTABLE 5 GALLON    Plews 13-50AE Air Hose
Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings. Portable, ready-to-use tank is great for inflating tires and cleaning engines, garage and workshop. Refills from any air service station or air compressor in minutes. Equipped with air shut-off valve, pressure gauge, regulator, 4' x 1/4" air hose and tire chuck 85-125 PSI working pressure. Convenient built-in carry handle. Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI.
Edge 3107G Pneumatic Die Grinder Plews 552-50AK-5 Air Hose Kit Prohoze PRO-1450 Air Hose
Die grinder features a composite housing for durability and powerful 1/4 HP motor. Specs: RPM: 27,000, Air Inlet Size : 1/4", Min. Hose Size:  3/8", Collet Size (in.): 1/4, Side Handle: No: Durable composite housing Ball bearing construction 1/4 HP motor Self-locking throttle. Quality rubber air hose. 300 PSI. Comes with bonus blow gun kit . Use in  garage, shop, industry,  or home. Includes: Safety blow gun, coupler and plugs, 5 different tips. Rugged reinforced polyurethane construction is abrasion, puncture and chemical-resistant. Flexible from -40 to 160 degrees F for revolutionary workability. Reusable 1/4" MPT fittings are field repairable in three easy steps. Non-marring translucent material provides a clear view of airline contaminants. Hi-vis safety yellow color for improved jobsite visibility. Snap-fit strain reliefs provide flexible reinforcement for extended life. Up to 2x lighter than standard air hoses. Ribbed design prevents hose from sticking to itself or other jobsite obstructions.
HOSE AIR 1/4INX100FT          Tru-Flate 41-907 Air Tank Conversion Kit AIR TANK PORTABLE 10 GALLON
HOSE AIR 1/4INX100FT
Our Price: $47.99
Flexible Hybrid Polymer material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won?t work against you during operation and coils easily after use. It also offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed. Anodized aircraft aluminum ends. Max working pressure at 70 degrees Fahrenheit, 300 PSI. Complies with all new tank standards. Includes: chuck, 4' air hose, pressure gauge, manifold with safety and tank valve. Portable, ready-to-use tank is great for inflating tires and cleaning engines, garage and workshop. Refills from any air service station or air compressor in minutes. Equipped with air shut-off valve, pressure gauge, regulator, 4' x 1/4" air hose and tire chuck 85-125 PSI working pressure. Convenient built-in carry handle.
Ingersoll-Rand 114GQC Air Hammer Tru-Flate 24-404 Compact Air Line Regulator with Pressure Gauge AIR HOSE PROFLEX 3/8IN X 50FT
Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting  metals, chipping and scraping surfaces. Specs:  Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes  chisel shank size .401. Non-rising locking knob. Regulators have a solid piston and balanced poppet for excellent performance and longer life. Impervious to a wide range of lubricating oils, greases, most chemicals, provides accurate control, and assures smooth, uninterrupted operation. Fast reverse flow capacities. Two gauge ports are provided and a pressure gauge is included. Maximum operating pressures are 250 PSI primary and 2 to 125 PSI secondary. Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings.
Stanley WINTEROIL-20OZ Winter Grade Pneumatic Tool Lubricant Prohoze PRO-3850 Air Hose Mintcraft ATA-050 Air Hose Connector
Prevents moisture coming into the tool from freezing. Rugged reinforced polyurethane construction is abrasion, puncture and chemical resistant. Flexible from -40? to 180? for revolutionary workability. Hi-vis safety yellow color for improved job site visibility. Non-marring translucent material provides a clear view of airline contaminants. Reusable 1/4" MPT fittings are field repairable in three easy steps. Snap-fit strain reliefs provide flexible reinforcement for extended life. Up to 2 times lighter than standard air hose. Ribbed design prevents hose from sticking to itself or other job site obstructions. Brass.
Tru-Flate 24-301 Manual Compact Air Line Filter Tru-Flate 24-311 Manual Air Line Filter Ingersoll-Rand 301B Air Angle Die Grinders
Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces. Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces. Lightweight, durable and maneuverable. Comfortable composite grip is ideal for a variety of applications including porting, weld breaking, de-burring, polishing and grinding. Powerful motor delivers 0.33 hp (0.25 kw) and 25,000 rpm free speed. Integral safety lock throttle lever prevents accidental start-up. Tool comes with 1/4" and 6 mm collets and 2 wrenches. Rear exhaust directs air away from the operator.  Built in lubricating wick increases angle gear life. Composite housing protects tool from cold air and offers greater operator comfort. Durable ball bearing construction improves balance, reduces vibration and ensures longer life.
Abbott Rubber 1010-03825-50-4MM Quick Connect Air Hose 50 ft Stanley PRECOMOIL-32OZ Pneumatic Tool Lubricant Mintcraft TA-054 Air Hose End
Rubber hose, durable, abrasion resistant. Designed to reduce carbon buildup in compressor valves to ensure a longer compressor life. Provides the proper mix of lubricants for compressors to function properly and efficiently. Mintcraft Air Hose End, 1/4 in Nominal, MNPT End, 3/8 in Inside Diameter
Mintcraft ATA-057 Hose Plug HOSE AIR 3/8INX100FT          Mintcraft ATA-0243L Barb Hose Splicer
HOSE AIR 3/8INX100FT
Our Price: $64.99
Mintcraft Hose Plug, 1/4 in Nominal, MNPT End, Brass Flexible Hybrid Polymer material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won?t work against you during operation and coils easily after use. It also offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed. Anodized aircraft aluminum ends. Max working pressure at 70 degrees Fahrenheit, 300 PSI. All brass.
Mintcraft ATA-0561 Air Line Connector Stanley WINTEROIL-4OZ Winter Grade Pneumatic Tool Lubricant Tru-Flate 24-414 Compact Air Line Regulator with Pressure Gauge
Brass. Prevents moisture coming into the tool from freezing. Polycarbonate locking knob 10.4. Accurate pressure regulation with maximum water and dirt separation are provided in a single, compact unit. The filter significantly increases the life of expensive equipment. The regulator employs a solid piston which  resists rupture, cracking or tearing under pressure or high cycle rates. Tru-Flate Regulators have fast flow capabilities. Maximum operating pressures are: 150 PSI at 125 degrees F primary, 2 to 125 PSI secondary with polycarbonate bowls; N 65 Automatic Float 40 5 oz.
AIR HOSE PROFLEX 1/4IN X 100FT Edge 3101G Pneumatic Die Grinder Ingersoll-Rand 170G Air Ratchet Wrenches
Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings. Can be used in various applications including porting, weld breaking, deburring, polishing and grinding. Self-locking lever throttle. Grease fitting for increased angle gear life. Ergonomic grip. 20,000 rpm. Rear exhaust. 1/4" collet output. 1.8 m/s2 vibration. 3 CFM average air consumption. 18 CFM air consumption at load. 1/4" air inlet size. Variable speed throttle. Heat treated head for durability. Comfortable ergonomic grip. Ideal for general engine repair, home projects and light industrial applications. Specs:3/8" chuck size, 170 RPM, 55 ft. lbs. max torque, 4 CFM at PSI, 90 max pressure, 3/8" max bolt capacity, 1/4" inlet NPT.
Edge 311G Dual Action Pneumatic Sander Ingersoll-Rand 210G Gravity Feed Pneumatic Spray Gun Plews 510HR-RET Retractable Air Hose
Variable speed sander with built-in power regulator, handle control, and 6" pad. Used for body shop and metal or wood preparation. Specs: CFM 4, CFM at Load 17, speed (RPM) 10,000, air inlet size (NPT) 1/4", and min. hose size 3/8". Adjustable fluid, air and spray pattern controls; works in a variety of applications, from automotive refinishing to deck and fence work. Specs: required CFM 11, operating PSI 50. Included: (1) nozzle (size 1.4mm) and  (1) 20 1/4 oz plastic paint cup. All steel construction for industrial applications. Spring powered auto rewind. Ideal for mounting of wall, floor or ceiling. Guide arm adjustable for different angles. Valve assembly handles up to 250 PSI and 25 cfm. Locking ratchet brake.
Plews 13-100AE Air Hose Prohoze PRO-14100 Air Hose Edge 300G Random Pneumatic Sander
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. Rugged reinforced polyurethane construction is abrasion, puncture and chemical-resistant. Flexible from -40 to 160 degrees F for revolutionary workability. Reusable 1/4" MPT fittings are field repairable in three easy steps. Non-marring translucent material provides a clear view of airline contaminants. Hi-vis safety yellow color for improved jobsite visibility. Snap-fit strain reliefs provide flexible reinforcement for extended life. Up to 2x lighter than standard air hoses. Ribbed design prevents hose from sticking to itself or other jobsite obstructions. Variable Speed. Produces swirl-free finish. Lightweight, low vibration composite design. Contoured grip. Specs: Air Consumption (CFM):16; CFM at Load: 15.5; Speed (RPM): 10,000; Air Inlet Size (NPT): 1/4" ; Min. Hose Size: 5/16". Includes: 360 degree swivel vacuum adapter that provides greater range of movement without tangled hoses and cords.
Ingersoll-Rand Edge 7811G Reversible Air Drill Ingersoll-Rand Edge 236G Air Impact Wrench North American Tool 52710 Speedway Air Compr
Contoured grip and trigger. Keyless chuck for quick bit replacement. Handle exhaust directs air away from work area. Specs: 5 HP, 3/8" chuck, 1700 rpm, 4 CFM, 29 CFM at air consumption at load, 1/4" inlet, 3/8" minimum hose size. 7.4" overall length. 2.7 lbs. tool weight. Variable reversible speed with aluminum housing, a working torque of 25-200 (ft.-lb.) and a max. torque of 450 (ft.-lbs.), ergonomic grip and handle exhaust. Specs: drive is 1/2" (square), no load speed is 8,000 RPM, average air consumption (CFM) is 4.3, CFM at Load 24, inlet size is 1/4", min. hose size is 3/8", noise level is 90.3 db, weighs (lbs.) 5.3 lbs and is 7 1/8" long. 1 gallon pancake oil free air compressor with inflation kit. Max psi 100.
Ingersoll-Rand EC300  Air Nibbler Ingersoll-Rand EC112  Air Drills Senco PC1010 Air Compressor
The Ingersoll Rand Edge 2.0 nibbler offers the ability to cut up to 18 gauge steel, aluminum, plastic or other metals in 6' per minute. Ergonomic grip. Angle head for easy cutting. Low profile throttle lever. 1/4" radius with ideal accuracy gives you the control and cutting power you need without the distorted edges. The Ingersoll Rand Edge 1/2" air drill features a powerful and quiet design with speeds from 500 rpm and 0.5 HP. Keyless 1/2" chuck for extended life and easy bit change out. Side ergonomic grip handle and ergonomic grip make this tool more comfortable and precise when getting work done. Ultra quiet and ultra light lube-less pump compressor. Ideal for a range of finish and trim projects, as well as for home improvement jobs, hobbies and crafts. Lightweight, portable and easy to maintain. The heavy-duty induction motor is efficient for long life operation. The oil-free pump design and maintenance free. Weighs only 20 lbs.
Ingersoll-Rand 107XPA Air Ratchet Wrenches North American 7517 Speedway Air Compressors Pulsar PCE6020K  Air Compressors
Features variable speed reverse lever-style throttle, with 160 RPM, 54 ft-lb (73 Nm) of maximum torque, and a 360 degree adjustable exhaust that directs air away from the operator and the work. Specs: average air consumption (CFM) is 4, CFM at load 19, inlet size is 1/4", and min. hose size is 5/16". 2 gallon oil free air compressor. 1.1 cfm's at 40 psi. Lightweight/portable. Quiet operation, 75dB. Air regulator and quick coupler included. Max psi 100. Oil-less, 2 gallon tank with 6 piece accessories. 100 psi maximum pressure. 1.5 CFM/40 psi; 120V/60HZ/3 HP.
Porter-Cable C2002 Air Compressor Ingersoll-Rand 231G Air Impact Wrench Ingersoll-Rand 231C Air Impact Wrench
Oil-free pump design for reliability and no maintenance. Low amp motor starts easily in cold weather or with extension cord. Upgraded shroud, handle and console cover protect vital components, makes unit easier to carry and includes cord wrap. Two regulated, factory installed air couplers to easily support two users. Water drain valve and rubber feet. Specs: 120 volt, 150 PSI, 3.7 SCFM at 40 PSI and 2.6 SCFM at 90 PSI for fast recovery time. 34 lbs. tool weight. Includes: Compressor and operating manual.. Twin Hammer impact mechanism and forward/reverse power regulator. Comfortable vibration-absorbing grip. Specs: 6-vane motor, 1/2", 8,000 RPM, 500 ft/lbs.max torque, 5 CFM at 90 PSI. Continuously refined. Offers the sheer power  and performance features to tackle the toughest jobs with ease. Durable and economical. Adjustable power regulator. Pressure feed lubrication. Easy to service two piece construction. 600 ft./lbs of torque and provides 8,000 rpm (1,2000bpm) to deliver fast, efficient performance. Contoured handle for comfort and control.
Ingersoll-Rand 2100G Composite Air Impact Wrench Mintcraft ATA-055 Quick Coupler Plews 545HR-RET Reel Air Hose
Powerful, 550 ft-lbs of max reverse torque. 6-vane motor with forward power regulator, composite housing, handle exhuast, 360 degree swivel inlet, and twin hammer impact mechanism. Specs: no load speed is 9,500 RPM, average air consumption (CFM) is 5, CFM at load 25, 1,200 IPM, inlet size is 1/4", min. hose size is 3/8", noise level is 96.6 db and weighs 4.3 lbs. All brass. Features all-steel construction and a spring tension brake to prevent accidental unwinding. Mounts in either direction. Polyurethane with dual output fittings. 200 PSI working pressure.
Stanley-Bostitch BTFP02011 Air Compressors Senco PC1010N  Air Compressors Ingersoll-Rand EB2125X Air Impact Wrench
6 gallon oil free Pancake compressor delivers up to 2.6 SCFM at 90 psi. Only 14" in diameter and 33 lbs. for easy portability. It's light enough to carry and get in and out of the jobsite. Long life, maintenance free pump for convenient on going uses. At just 80 dBA, this compressor offers the user a quiet work environment. Integrated control panel helps vital compressor components to be protected against tough jobsite conditions. Includes 2 Universal couplers to easily support 2 users. Ideal for trim and finish applications including installing molding, cabinetry or window/door casings. Designed with the professional contractor in mind. The lightweight and compact design ensure easy portability combined with the ultra quiet operation makes the compressor the ideal finish and trim unit. Long life induction motor and oil free pump design eliminate the need for oil or regular maintenance. Integrated control panel for easy access to couplers and pressure control knob; highly visible gauges. Rugged roll cage protects critical components. 68 dB A for ultra quiet operation. 4 amps at 115 volts. SCFM at 90 PSI 0.7. Maximum pressure 135 psi. Ultra lightweight at only 21 lbs. 690 ft.-lbs. of reverse torque means you'll have the power to burst through those stubborn bolts. Comfortable and easy to use. One hand forward/reverse switch. Lightweight at only 4.2 lbs. Made in the U.S.A.
COMPRESSOR .75HP 125PSI HOTDOG Mintcraft ATA-056 Quick Coupler Ingersoll-Rand Edge Pro 2317G Air Impact Wrench Kit
1.0 CFM at 90 psi. 125 max psi. 0.75 (Peak) horsepower. 44 dB @25 ft. 1 gallon air tank capacity. Dimensions: 14.1"L x 13.77"W x 12.6"H. Weighs 24.7 lbs. All brass. Variable speed trigger, twin hammer impact mechanism, ergonomic grip, powerful 6-vane motor and easy to use forward/reverse power regulator. Includes: 1/2" impact tool 231G, 3/8" ratchet 170G, a socket set, and a blow-molded carrying case.
Senco PC1280  Air Compressors North American Tool 52024 Speedway Air Compr Pulsar PCE6060K Air Compressors
Designed with the power and speed to handle all finish and trim applications. The compact, lightweight and balanced design allows for easy portability. The oil free pump allows for maintenance free operation and no oil leaks. Draws only 12 amps; will not trip circuit breakers. Integrated control panel for easy access to couplers and pressure control knob; highly visible gauges. Pancake tank design keeps compressor compact and well balanced. Weighs only 38 lbs. Dual couplers allows you to run 2 hoses simultaneously. 150 max psi. 2 gallon twin stack, oil free oil compressor with 1/4" x 25' auto rewind hose reel. Construction grade hose. Hose reel provides convenience and on-board storage all in one package. Low profile design for stability and safety. Push connect coupler. Quiet operation, only 75 dB. 1 cfm at 40 psi and .05 cfm at 90 psi. 120V/60HZ/3.5 Peak HP; 5.2 CFM/40 psi; 4.2 CFM/90 psi. Max. pressure 115 psi. 15 piece accessories included.
COMPRESSOR QUITE 135PSI 1 GAL Senco PC0968 Air Compressor North American 7340 Speedway Air Compressors
.75 SCFM delivered at 90 PSI, 1.0 gallon tank and 135 max PSI enables more nails to be fired and provides quicker recovery. Durable oil free pump provides extended maintenance-free operation. Low 2.6 amp draw motor provides easy start-up and reduces breaker tripping. Belt drive. Low 71 dBA allows for quieter operation. Roll cage and control panel provide protection to key compressor components. Lightweight at only 24 lbs, thin (9.0") and compact design is easy to carry and store. Ball valve drain allows for quick and thorough tank draining. One quick coupler to easily support 1 nailer. Convenient cord wrap for easy storage. High-flow regulator for increased performance. Cold weather start up valve. Designed with the power and speed to handle all finish & trim applications; comes with an oil less pump which ensures no messy oil leaks. Specs: Height: 13.5" Length: 16"; Weight: 38 lb; Recovery Time: 95 ? 135 psi 17 seconds; Pump Up Time: 0 ? 135 psi 82 seconds; Horsepower: (1.0 HP running); Powersource: Electric; Max Pressure: 135 psi; Tank Storage: 2.5 gal.; Max Amp at 115V: 8 amps. 4 gallon twin stack, solid cast iron, oil lube air compressor. high efficiency motor with thermal overload protection. 5.5 cfm at 40 psi and 4.1 cfm at 90 psi. Has 2 regulated, factory installed air couples to support two users. low profile design for easy handling and stability.
Pulsar PCE6050T Air Compressors Stanley-Bostitch BTFP01012 Air Compressors COMPRESOR PANCAKE 165 PSI 6GAL
Twin-tank, oil-lubricated 5 gallon unit. Powerful 3.5 HP electric motor, flutter-valve pump puts out 115 max psi and cfm's of 5.2 at 40 psi and 4.2 at 90 psi. Functional enough for use as an inflator, yet vibrant enough for use with the majority of air tools. Compact and portable with easy to read pressure gauges. 2.5 gallon suitcase style compressor. 2.0 SCFM delivered at 90 psi, 150 max psi enables many nails to be fired with quick recovery. Durable oil free pump provides extended maintenance free operation. Low 82 dba allows for quiet operation. Roll cage and control panel provide protection to key compressor components. Bostitch high efficiency/low amp motor for easy start up in cold weather or extension cord application (12 ga 50' (15.2 m) or less). Lightweight (32 lbs), thin (12") and compact design is easy to carry and store. Can be run in either vertical (higher pick-up) or horizontal position (low CG). Ball valve drain allows for quick and thorough tank draining. Two quick couplers to easily support 2 nailers. Bostitch high flow regulator and couplers to maximize nailer performance. 165 max psi tank (22.7L) and 2.6 scfm delivered at 90 psi pump, enable long tool run time with quick recovery. High efficiency motor for easy start up in cold weather or extension cord application. (14 gauge or larger, 50 ft (15.2m) or less). 75.5 dBA noise level for a quiet work environment. High flow regulator and couplers to maximize air tool performance. Long life oil free pump for maintenance free operation. Console cover protects controls and is removable to allow easy repair. Outlet tube re-routed to avoid being catch point. 30 lb weight makes unit easy to carry/store. 2 universal couplers to easily support two users. Ball drain valve for quick and thorough tank draining. Convenient cord wrap for easy storage. Protective rubber leg covers to prevent marring. High flow regulator for increased performance. 120 v, 60 Hz, 10 amps, universal motor.
Senco PC1131 Air Compressor Ingersoll-Rand 2115TIMAX Industrial Duty Air Impact Wrench Hitachi EC12 Portable Air Compressor
Generates 4.4 SCFM which provides enough power for all types of applications, from finish to framing. The oil splash design and induction motor provides the durability expected for professional contractors. Direct drive motor, Cast iron sleeve/cast iron head cylinder, oil-splash lubrication. Specs: 2.0 HP Running, 4.4 SCFM at 90 PSI, 125 max PSI, 4.3 gallon tank. 14.5"H x 20.5"L. 60 lbs. tool weight. Includes: 1/4" coupler. Allows greater access to tight spaces, while the minimal weight (2-1/2 lbs) reduce operator fatigue. Hard coat anodized end plate stands up to tough jobs. 4 position power regulator dial for max control. Improved grease fitting for easy maintenance. One hand forward/reverse for easy operation with 300 ft-lbs max power. 7-vane motor for more power. Ergonomic housing offers greater operator comfort. Feather touch trigger enables impressive control. Optimized air flow ensures maximum performance. Quiet tool technology reduces sound levels without compromising power performance. Vertically stacked twin tanks, 2 gallon capacity each for running multiple nailers (4.0cfm at 90psi). Direct drive electric motor provides durability and long life. All metal inner construction and fan. Line regulator with gauge; oil lubricated pump and O-ring on drain cock makes valve easy to open and close. Specs: Power Output: 2hp; Amps: 14.5; Rpm: 3,450; Air Displacement: 4.0cfm at 90psi; Start/Stop Control: 100/125psi; Tank Capacity: 4.0 gal. Weight: 60lbs; Lubrication: Oil; Recovery Time: 14-sec. Includes: Synthetic Oil (8oz) & Oil Dipstick.
HOSE AIR BULK 1/4INX250FT     Pulsar PCE6150 Air Compressors COMPRESSOR 1.5HP 125PSI STACK
HOSE AIR BULK 1/4INX250FT
Our Price: $229.99
Flexible Hybrid Polymer material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won?t work against you during operation and coils easily after use. It also offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed. Anodized aircraft aluminum ends. Max working pressure at 70 degrees Fahrenheit, 300 PSI. 120V/60HZ/3.5 Peak HP. 5.2 CFM/40 psi; 4.2 CFM/90 psi. Max pressure 115 psi. 2.5 CFM at 90 psi. 1.5 (Peak) horsepower. 125 psi max. 47 dB @25 ft. 4 gallon air tank capacity. Dimensions: 16.93"L x 16.54"W x 16.54"H. Weighs 68.5 lbs.
Ingersoll-Rand 3445MAX Pneumatic Angle Grinder Makita MAC700 Air Compressor ThunderGun 232TGSL Air Impact Wrench
Lightweight design with composite grip for improved comfort. Locking lever with tease throttle and rear exhaust. Side handle can be used on left or right. Specs: 0.88 HP, 4-1/2", 12,000 RPM, 5/8" -11 thread, 4-1/2" disc capacity, 10 CFM, 41 CFM at load, 3/8" min hose, 1/4" inlet. Cast iron pump with Big Bore cylinder and piston, combined with greater bore and stroke, delivers maximum performance. Substantially lower noise levels with a large 1,720 - RPM pump-enabling greater displacement at lower RPM. Reduces incidences of tripped breakers and voltage drop that can cause premature motor failure. Cooler running pump, minimizes wear. Specs: Horsepower: 2.0; Pump: Oil-lubricated; Tank (gal.): 2.6 Hot Dog; Performance (CFM): 90 PSI: 3.3, 40 PSI: 3.8; Operating Pressure (PSI): 0 - 130; AMPS: 12.4; Noise level (dB): 80; Size: 18"x10"x22"; Net Weight (lbs.): 52. Includes: 1/4" Brass Makita universal coupler. As close as you can get to the real racing tools. Delivers power, speed, and durability for shop tasks. Specs: 625 ft.-lbs. of torque in reverse, with 10,000 rpm.
COMPRESSOR HANDCARRY 100PSI 4G North American Tool 7678 Speedway Air Compressors COMPRESSOR HD 200 PSI 2-1/2GAL
3.2 CFM delivered at 100 psi pump enables quick recovery. Oil lubricated pump improves durability. Cast iron cylinder enhances pump life. Lightweight  at only 53.32 lbs. design for easy use and handling in a variety of orientations. High-flow regulator for increased performance. Dual soft start valves assist in cold weather start-up. 4 gallon twin stack tank design. Direct drive. 120v Ac 14 amps, 60 Hz, 2 pole induction motor. Pump speed 3,400 rpm. 15 gallon vertical, solid cast iron, oil lube air compressor. high efficiency motor with thermal overload protection. 6 cfm's at 40 psi and 5 cfm's at 90 psi. Reduced vibrations with rubber foot stabilizers. Reduced noise level of 93-95 dB. Dual "push connect" manifold. Max psi 125. 3.0 scfm delivered at 90 psi pump. 2.5 gallon tank and 200 max psi enables a large amount of nails to be fired and provides quick recovery. Durable oil free pump provides extended maintenance-free operation. Low 71.5" dBA allows for quieter operation (tested per ISO3744). Low 12 amp draw motor provides easy start-up and reduces breaker tripping. Lightweight (36 lbs.), thin (12.5") and compact design is easy to carry and store. Compressor can be operated/stored in either the vertical or horizontal position. Roll cage and control panel provide protection to key compressor components. Dual quick couplers to easily support 2 nailers. Ball valve drain allows for quick and thorough tank draining. Convenient cord wrap for easy storage. High-flow regulator for increased performance. Drive belt. 120 volt, 60 Hz, 8 amps, universal motor. 2,300 rpm pump speed.
Stanley CAP2040ST-OL Air Compressor WRENCH IMPACT 1/2IN 930FT/LBS COMPRESSOR CRDLS 60V 2.5GAL
Compact design was engineered to be more maneuverable and convenient to carry. It offers enough air flow to operate two framing nailers or three roofing nailers simultaneously. Four oversized rubber feet to help minimize vibration. Durable ball type drain valve. Roll bar handle protects the oil site glass and other gauges against damage if the unit accidentally tips or rolls over. Upgraded industrial-grade pressure switch/regulator makes for easy adjustments and increased durability. Oil-lubricated pump offers a cast iron cylinder for durable performance over extended periods of use.  Specs: 3 horsepower (peak) induction motor, this unit draws only 13.8 amps (120 volts) to prevent circuit breakers from flipping as the motor cuts in and out. Four-gallon stack tank compressor providing 4 CFM at 90 psi and a maximum operating pressure of 135 psi. Powerful and durable. Provides 1,350 lbs of torque and 930 ft-lbs of max reverse torque powered by Ingersoll Rand's finely tuned twin-hammer impact mechanism. Weighs only 4.6 lbs, providing less weight so you can work harder and faster for longer periods of time. The FlexVolt 60 volt max 2.5 gallon cordless air compressor offers all of the convenience and portability of cordless with the power of a corded tool. Each battery charge allows for up to 1,220 nails, providing the run-time to complete a variety of applications. OneTurn regulator for fast, accurate pressure adjustments. Heavy duty roll cage for jobsite applications. Brushless motor paired with a heavy duty oil-free pump. 135 max psi tank storage. Lightweight and portable at only 21.5 lbs. and a height of 15.5". Made in the USA.
Ingersoll-Rand P1IU-A9 Air Compressor HOSE AIR BULK 3/8INX250FT     Pulsar PCE6280 Air Compressors
HOSE AIR BULK 3/8INX250FT
Our Price: $319.99
Single stage compressor for professionals and serious do-it-yourselfers it is ideal for the home, shop or jobsite. Specs: HP: 2; CFM at 90 PSI:4.30; Max. PSIG: 135; Dimensions LxHxW: 19x19x19; Net Weight: 77lbs; Start Up Kit: No. Flexible Hybrid Polymer material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won?t work against you during operation and coils easily after use. It also offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed. Anodized aircraft aluminum ends. Max working pressure at 70 degrees Fahrenheit, 300 PSI. 120 V/60HZ/5 Peak Hp. 6.4 CFM/40 psi; 5.6 CFM/90 psi. Max pressure 125.
COMPRESSOR 2HP 125PSI S-STACK COMPRESSOR AIR 15GAL 115PSI   COMPRESSOR WHEEL 200PSI 4-1/2G
5.0 CFM at 90 psi. 125 max psi. 2.0 (Peak) horsepower. 49 dB @25 ft. 5 gallon air tank capacity. Dimensions: 28.35"L x 20.08"W x 20.08"H. Weighs 86.3 lbs. 5.2 CFM at 40 PSI or 4.2 CFM at 90 PSI. Max pressure: 115 PSI. Oil lubricated. Features easy to read dual pressure gauges, wheel kit and quick connect coupler. Accessories Kit includes: 1/2" impact wrench, tire inflator with gauge, spray gun, 2" brand nailer/stapler and 25' hose. 200 PSI max tank storage pressure provides a user with 80 percent more usable air. 5.0 SCFM at 90 PSI allows the compressor to recover quickly after its initial tank charge is exhausted. Vertical stand feature and collapsible handle allows a user to save space by transporting or storing the compressor in a vertical position. 78 dBA operation noise level for a quieter work environment. 10" non-flat foam tires allow for easy transportation around the jobsite. EHP efficient high pressure technology allows for longer pump and motor life. Oil free, maintenance free pump for convenient use. Efficient high pressure motor allows the compressor to be run with an extension cord (12 ga. or heavier, 50 ft. or less) due to consistent amp draw requirement of the compressor. High flow coupler allows for maximum nailer performance. Metal console panel provides a display area as well as protects the gauges, couplers and regulator. High flow coupler allows for maximum nailer performance. 2" gauges allow for an easy to read surface. Weighs 83 lbs.
COMPRESSOR WORKSHOP 200PSI 15G HOSE AIR BULK 1/2INX250FT     Ingersoll-Rand 261 Air Impact Wrench
HOSE AIR BULK 1/2INX250FT
Our Price: $449.99
5.0 SCFM at 90 psi allows for quick compressor recovery times. 200 psi max tank storage pressure allows for longer air tool run times. 78 dBA (tested per ISO3744) operational noise level for a quieter work environment. EHP efficient high pressure technology delivers exceptional air-tool run times. Oil free, maintenance free pump for convenient use. Efficient high pressure motor allows the compressor to be run with an extension cord (12 ga. or heavier, 50 ft or less) due to consistent amp draw requirements of the compressor. Compact design allows for the compressor to be easily moved, transported and stored. Robust dual purpose handle provides additional protection to the compressor along with serving as a hose wrap. Metal console panel protects the gauge, coupler and regulator. High flow air regulator and high flow coupler allows for maximum air tool run time. 2 inch gauges allow for an easy to read surface. Wide track, semi-pneumatic tires allow for additional stability, easy movement and no tire maintenance. 1,750 rpm pump speed. 120 volts power supply. Flexible Hybrid Polymer material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won?t work against you during operation and coils easily after use. It also offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed. Anodized aircraft aluminum ends. Max working pressure at 70 degrees Fahrenheit, 300 PSI. Lightweight and easy to operate with handle exhaust and oil bath lubrication. Full power in reverse. 3-position adjustable power in forward. Integral 360-degree swivel inlet. Specs: 1,100 ft.-lbs. of max torque. 200-900 ft.-lbs. working torque, 1,200 BPM, 5,500 RPM, 9.5 CFM, 38 CFM at load, 98.1/109.1dBA. 12.4 lbs. tool weight. 9" tool length.
Ingersoll-Rand 2145QIMAX Air Impact Wrench Ingersoll-Rand P1.5IU-A9 Air Compressor Ingersoll-Rand 285B-6 General Duty Air Impact Wrench
Delivers incredible performance and industrial grade durability in an impact wrench. Efficient air consumption to save you money. 1,350 ft-lb max reverse torque is compact to access tight spaces. Built to last and designed to withstand tough use in rugged environments. Easy to clean inlet screen means less downtime and better tool performance. Single stage compressor for professionals and serious do-it-yourselfers, the versatile 'Garage Mate ' is ideal for the home, shop or jobsite. Equipped with a pressure switch, pressure gauge, regulator, safety valve, manual drain and six-foot power cord. Features a cast-iron, oil-lubricated pump for solid, reliable performance. Specs: CFM at 90 PSI: 5.2; Max. PSI: 135; HP: 2; Dimensions LxHxW: 22 x 23 x 43; Net Weight: 200lbs;  Voltage/Engine: 115 - 1 - 60 Combines power, control and durability. Delivers 1,770 ft-lb (2,400 Nm) of maximum torque, with a 5,250 rpm free speed at 120 psi (8.3 bar) and features a high efficiency 6-vane motor. The integral 360 degree swivel inlet makes kinked hoses a thing of the past. The swept-back handle provides ideal maneuverability, with an available 6" extended anvil for even more accessibility. Improved feather touch trigger.
North American 53200 Speedway Air Compressors IronHorse IHD6160V1 Air Compressor North American Tool 7295 Speedway Air Compressors
20 gallon, 2 cylinder, solid cast iron belt drive. Oil lube air compressor with pneumatic tires. 6.6 cfm's at 40 psi and 5.9 cfm's at 90 psi. Max psi 135. Thermally protected  electric motor with 60 gallon ASME registered tank, easy view oil sight gauge, cast iron compressor  minimizes vibration. Individual and removable cylinders, no magnetic motor starter required, pressure switch has on/off control. High efficiency reed valves for maximum performance, efficient heat removal from pulley-fan, sturdy belt guard. Specs: CFM/PSI is 11.2 CFM at 90 PSI, max rated PSI is 150, 208/230V electric motor, dimensions are: 27"Lx20"Wx65"H, weighs 260 lbs. OHV high performance ENERGIN gas engine wheelbarrow air compressor. 9 gallon twin tanks with solid cast iron "V" design pump for maximum performance. Run flat tire and dual "push connect" manifold. 9.1 cfm at 90 psi.
Hitachi EC2510E Air Compressor Ingersoll-Rand SS3J5.5GH-WB Air Compressor Woods/Iron Horse IHD7180V1 Iron Horse Air Compressors
Solid cast iron cylinder provides industry recognized premium material for long life, consistent compression and low oil carryover. Oversized oil level site glass allows everyone to monitor the oil level for the pump avoiding pump damage due to lock up from inadequate oil supply. Specs: Power Output: 5.5 Net HP at 3,600 RPM ( Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables), Honda engine. Displacement: 196 cc; Tank Capacity: 8 Gallon; Motor RPM: 3,200; CFM: 9.0 at 100 psi; Weight: 144 lbs. Includes: Synthetic Oil; Oil Dipstick; Wheel; Pressure Gauge; Drive Belt; Filter. Lightweight and durable with a low-profile design providing maximum maneuverability on the job site. Cast-iron, oil-lube compressors are designed for the toughest continuous duty applications. Specs:  5.5 HP, Honda engine, 11.8 CFM at 90 PSI, 135 PSI, 1/4" NPT, 8-gallon twin tank. Includes: Pressure switch, regulator and gauge, two quick disconnects to power multiple tools and twin 8-gallon capacity tanks. Features a 3 piston "V" style cast iron pump for longer life. 208/230 volt electric motor produces 16.5 CFM at 90 psi and 200 rated psi. No magnetic starter required. Easy view oil sight glass. Enclosed belt guard. Heavy-duty pressure switch with on/off control. ASME certified tank that meets the national pressure vessel certifications.
   
 
1