Home > POWER TOOLS & ACC > POWER TOOLS > HOBBY TOOLS/ENGRAVERS
Choose a sub category:
ROTARY HOBBY TOOLS ROTARY HOBBY TOOL ACCESSORIES ENGRAVERS
WOOD-BURNING TOOLS
Sort By:
1
Dremel 560 Cutting Bit Dremel 8193 Grinding Stone Dremel 932 Grinding Stone
Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM.
Dremel 952 Grinding Stone Dremel 402 Mandrel Bosch Accessories 113 Engraving Cutters
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. To be used with all cutting wheels, sanding discs and polishing wheels. Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM.
Dremel 429 Felt Polishing Wheel Dremel 432 Drum Sander Band Dremel 422 Felt Polishing Tip
Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM. Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM.
Dremel 83322 Grinding Stone Dremel 408 Drum Sander Band Dremel 480 Collet
Industrial abrasive made for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non ferrous metals or for working with conical and flat surfaces. Do not run in excess of 30,000 RPM. Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237.
Dremel 481 Collet Dremel 430 Drum Sander Band Dremel 462 Polishing Point
For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM. Rubber polishing points are impregnated with abrasive and used on on ferrous metals to remove rough areas, small burrs and scratch marks. Point is ideal for cleaning and defining grooves.
Dremel EZ Lock Finishing Abrasive Buff Set Dremel 411 Sanding Disc Dremel 412 Sanding Disc
Compatible with both No.EZ402 EZ lock mandrel and standard No.402 mandrel and all Dremel rotary tools. Refinish furniture, clean grills, remove paint, tarnish and more. Includes 2 buffs, 1 coarse, 180 grit and 1 medium, 280 grit. Dremel Sanding Disc, 3/4 in Diameter, 180 Grit, Grade: Coarse, Silicon Carbide Abrasive, Gray, Applicable Materials: Wood, Fiberglass and Metal, Suitable For Use With: Model 402 1/8 in Mandrel, For Rough Shaping and Smoothing Applications Dremel Sanding Disc, 3/4 in Diameter, 220 Grit, Grade: Medium, Silicon Carbide Abrasive, Gray, Applicable Materials: Wood, Fiberglass and Metal, Suitable For Use With: Model 402 1/8 in Mandrel, For Rough Shaping and Smoothing Applications
Dremel 413 Sanding Disc Dremel 512E Finishing Abrasive Buff Dremel 482 Collet
Dremel Sanding Disc, 3/4 in Diameter, 240 Grit, Grade: Fine, Emery Abrasive, Gray, Applicable Materials: Wood, Fiberglass and Metal, Suitable For Use With: Model 402 1/8 in Mandrel, For Rough Shaping and Smoothing Applications For cleaning, light sanding and removing tarnish from brass. Use on metal, glass, wood, aluminum and plastics. For use with the EZ402 EZ lock mandrel (SKU #482.4447) or standard 402 mandrel (SKU #619.9400). Includes 2 fine 320 grit buffs. Dremel Collet, Suitable For Use With: All Rotary Tools, Aluminum, Silver, 1/6 in Diameter X 1 in Length
Dremel 483 Collet Dremel 997 Grinding Stone Dremel 941 Grinding Stone
Dremel Collet, Suitable For Use With: All Rotary Tools, Aluminum, Silver, 1/32 in Diameter X 1 in Length Dremel Grinding Stone, 1/8 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel Dremel Grinding Stone, 5/8 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel
Dremel 85422 Grinding Stone Bosch 431  Oscillating Tool Accessories Dremel 108 Short Cylinder Engraving Cutter
Dremel Grinding Stone, 25/32 in Diameter, 1/8 in Arbor/Shank, Silicon Carbide Abrasive, Silver, For Sharpening, Deburring and General Purpose Grinding on Harder Materials A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4" bit diameter (6.4 mm). Pack of 6. Dremel Engraving Cutter, Short Cylinder, 1/32 in Diameter, 9-9/16 in Length, Inverted Cone Shape, 1/8 in Arbor/Shank, Carbon Steel, Gray, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing
Dremel 111 Long Cylinder Engraving Cutter Dremel 401 Mandrel Dremel Bosch Sanding Band
Dremel Engraving Cutter, Long Cylinder, 1/32 in Diameter, 9-9/16 in Length, Cylinder Shape, 1/8 in Arbor/Shank, Carbon Steel, Gray, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing Dremel Mandrel, Suitable For Use With: 414, 422 and 429 Dremel Accessories, 1/2 in Head Size Dremel Sanding Band, Series: Bosch, Suitable For Use With: Dremel ZW77000 2-Speed Cordless Grinder, Fine 120 Grit, 1/4 in Head Diameter, 1/8 in Shank, Aluminum Oxide, For rough shaping and smoothing Wood and Fiberglass, removing Rust from Metal surfaces and shaping Rubber Surfaces
Dremel 461 Polishing Point Dremel 463 Tapered Polishing Point Dremel 911 Grinding Stone
Dremel Polishing Point, 1/4 in Diameter, Cylindrical Shape, 3/32 in Arbor/Shank, Rubber Abrasive, Gray, For Ferrous Materials Dremel Polishing Point, Tapered, 1/4 in Diameter, 3/32 in Arbor/Shank, Rubber Abrasive, Gray, For Ferrous Materials Dremel Grinding Stone, 7/16 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel
Dremel 945 Grinding Stone Dremel 971 Grinding Stone Dremel 541 Grinding Wheel
Dremel Grinding Stone, 3/16 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Silver, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel Dremel Grinding Stone, 5/8 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel Dremel Grinding Wheel, 7/8 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, 35000 rpm Maximum, Gray, For Shaping, Smoothing, Sharpening, Deburring, Rust Removal and General Purpose Grinding on Most Materials
Dremel 8153 Grinding Stone Dremel 8175 Grinding Stone Dremel 83142 Grinding Stone
Dremel Grinding Stone, 3/16 in Diameter, Cylindrical Shape, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, 3/8 in Thickness, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel Dremel Grinding Stone, 3/8 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, 3/8 in Thickness, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel Dremel Grinding Stone, 9/32 in Diameter, 1/8 in Arbor/Shank, Silicon Carbide Abrasive, Gray, For Sharpening, Deburring and General Purpose Grinding on Harder Materials
Dremel 407 Drum Sander Band Dremel 561 Spiral Cutting Bit Bosch 90930 Carbon Motor Brush
Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM. Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. Do not run in excess of 30,000 RPM. For No. 275, No. 285, and No. 395 Type 3, 4 and 5 Moto-Tools.
Dremel 540 Cut-Off Wheel EZ-Lock 423E/423 Polishing Wheel Dremel 84922 Grinding Stone
Easily cuts off slots bolts, screws, sheet metal, thin wood and plastic, trim castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No. 402 mandrel. Polish silverware to high luster, car detailing and restore door and window hardware. Compatible with all Dremel rotary tools, EZ402 EZ Lock mandrel and standard 402 mandrel (619.9400). Do not run in excess of 30,000 RPM. Dremel Grinding Stone, 3/16 in Diameter, 1/8 in Arbor/Shank, Silicon Carbide Abrasive, Silver, For Sharpening, Deburring and General Purpose Grinding on Harder Materials
Dremel 107 Engraving Cutter Dremel 105 Engraving Cutter BRUSH CARBON STEEL 3/4IN 2PK
Dremel Engraving Cutter, 3/32 in Diameter, 9-9/16 in Length, Ball Shape, 1/8 in Arbor/Shank, Carbon Steel, Silver, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing Dremel Engraving Cutter, 1/32 in Diameter, 9-9/16 in Length, Ball Nose Shape, 1/8 in Arbor/Shank, Carbon Steel, Silver, Applicable Materials: Wood, Fiberglass, Ceramics, Plastic, Jewelry and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing Ideal for cleaning and removing rust and corrosion from items made of brass, copper, gold or other soft ferrous metals. Perfect for getting into hard to reach places like slots. You can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces.
BRUSH CARBON STEEL 1/2IN 2PK  Dremel 454 Precision Ground Sharpening Stone Dremel 455 Precision Ground Sharpening Stone
Ideal for cleaning and removing rust and corrosion. Use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots. Used for sharpening chain saw blades, quickly and easily. Used for sharpening chain saw blades, quickly and easily.
Dremel 453 Precision Ground Sharpening Stone Dremel 199 High Speed Cutter Dremel 953 Grinding Stone
Used for sharpening chain saw blades, quickly and easily. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM.
Dremel 420 Cut-Off Wheel Dremel 114 Rotary Tool Bit Dremel 106 Engraving Cutter
For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Dremel Rotary Tool Bit, 5/16 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 35000 rpm Maximum, Ball Shape, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes Dremel Engraving Cutter, 1/16 in Diameter, 9-9/16 in Length, Ball Shape, 1/8 in Arbor/Shank, Carbon Steel, Silver, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing
WHEEL EMERY IMPREGNATED 1IN   BRUSH NYLON BRISTLE 3/4IN 2PK BRUSH NYLON BRISTLE 1/8IN 2PK
Emery impregnated disc is ideal for general polishing of most ferrous metals, stones, glass and ceramics. Also ideal to clean and define grooves. Use it to remove small burrs and scratch marks left by grinding and sanding. Ideal for light deburring, general cleaning and polishing in hard to reach places such as slotted surfaces. Long wearing nylon bristles. Can also be used for cleaning hard plastic such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Ideal for light deburring, cleaning and polishing in hard to reach places such as slotted surfaces. Nylon bristles make it great for polishing silverware, jewelry and other precious metals. Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels. Can be used with polishing compound.
BRUSH STAINLESS STEEL 3/4IN   BRUSH STAINLESS STEEL 1/2IN   BRUSH STAINLESS STEEL 1/8IN
Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Ideal for cleaning, deburring and surface finishing. Use on items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Ideal for cleaning, deburring and surface finishing items made from stainless steel, aluminum, silver, pewter or other white metals. Very effective on flat surfaces and in hard to reach places such as slots. Stainless steel wire bristles. Great for polishing and cleaning.
BRUSH BRASS 3/4 INCH 2PK      BRUSH BRASS 1/2 INCH 2PK      BRUSH BRASS 1/8 INCH 2PK
Ideal for cleaning and surface finishing. Use on items made from gold, bronze, copper or brass. Use a brass brush to create a soft, sating or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel). Ideal for cleaning and surface finishing items made from gold, bronze, copper or brass. Use a brass brush to create a soft, satin or matte finish. Very effective on flat surfaces and in hard to reach areas like slots (brass wire is non-sparking and softer than steel).
WHEEL SIC IMPREGNATED 1/2IN   Dremel 500 Abrasive Wheel Dremel 516 Abrasive Point
Designed for light stock removal and high luster polishing. Works on a variety of surfaces including steel, aluminum, brass, silver, hard plastics, gold and other metals. Impregnated with silicone abrasive and lubricant. Eliminates the need for polishing compound. Dremel Abrasive Wheel, 1 in Diameter, 1/8 in Arbor/Shank, Grade: Medium, Aluminum Oxide Abrasive, 35000 rpm Maximum, Gray, For Sharpening, Deburring, General Purpose and Grinding Applications Dremel Abrasive Point, 1/2 in Diameter, Bullet Shape, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, For Paint and Rust Removal Without Removing Any of the Base Metal
Dremel EZ471SA Detail Coarse Abrasive Brush Dremel EZ472SA Detail Medium Abrasive Brush Dremel EZ473SA Detail Fine Abrasive Brush
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
Dremel 118 High Speed Cutter Dremel 124 Rotary Tool Bit Dremel 144 Rotary Tool Bit
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
Dremel 193 High Speed Cutter Quik-Change 4485 Collet Nut Kit Dremel 409 Cut-Off Wheel
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Kit consisting of a special collet nut and four collets for use with a variety of Dremel tools, attachments and handpieces. Allows you to quickly change collets to accept bits with shanks of 1/32" to 1/8". Kit contains (1) each 1/8" Collet, 3/32" Collet, 1/16" Collet, 1/32" Collet and Collet Nut. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel.
Dremel 7122 Rotary Tool Bit Dremel 121 Rotary Tool Bit Dremel 134 Rotary Tool Bit
Dremel Rotary Tool Bit, 3/32 in Diameter, 1/8 in Shank Diameter, Diamond Cutting Edge, Applicable Materials: Wood, Jade, Ceramics, Glass, Hard Steel and Semi-Precious Stones, 25000 rpm Maximum, Cylinder Shape Dremel Rotary Tool Bit, 1/4 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 35000 rpm Maximum, Pear Shape, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes Dremel Rotary Tool Bit, 5/16 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, Round Shape, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes
Dremel 191 Rotary Tool Bit Dremel 9924 Replacement Engraving Point BRUSH CARBON STEEL 1/8IN 2PK
Dremel Rotary Tool Bit, 1/8 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 35000 rpm Maximum, Ball Shape, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes Replaceable bit for the 290 Dremel (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving. Versatile brush for removing rust and corrosion. For use on items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs, automobile parts and electrical contacts. Can also use wire brushes to create an artistic effect on coarse-grained wood. Its shape makes it well suited for cleaning flat surfaces and getting into hard to reach places like slots.
Dremel 502 Flap Wheel WHEEL KIT DIAMOND 3PIECE 3/4IN Dremel 504 Flap Wheel
A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic. Diamond wheel kit includes (2) 3/4" (19.05 mm) diamond wheels and (1) 1/8" Mandrel. For cutting metal, glass, ceramics and plastics. Max rpm: 30,000. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic.
Dremel 503 Flap Wheel Dremel 426 Cut-Off Wheel Dremel 115 Rotary Tool Bit
A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic. Fiberglass reinforced, use for slicing and cutting metal, wood and plastic.  Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Dremel Rotary Tool Bit, 5/16 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, Cylinder Shape, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes
Dremel 505 Flapwheel Sander Dremel 654 Router Bit Dremel 617 Core Box Router Bit
Dremel Flapwheel Sander, 3/16 in Diameter, 4.22 in Width, 3/8 in Flap Thickness, 120 Grit, 1/8 in Shank For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM. Dremel Router Bit, Core Box, 1/4 in Point Diameter, High Speed Steel, Gray, Applicable Materials: Wood and Other Soft Materials, For Routing, Inlaying and Mortising In Wood and Other Soft Materials
Dremel 9904 Rotary Tool Bit Dremel 9905 Rotary Tool Bit Dremel 9906 Rotary Tool Bit
Dremel Rotary Tool Bit, 3/32 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal and Plastic, 35000 rpm Maximum, For Shaping, Smoothening and Grinding Dremel Rotary Tool Bit, 1/8 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal and Plastic, 35000 rpm Maximum, For Shaping, Smoothening and Grinding Dremel Rotary Tool Bit, 1/8 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal and Plastic, 35000 rpm Maximum, For Shaping, Smoothening and Grinding
Dremel 9909 Rotary Tool Bit Dremel 9910 Rotary Tool Bit Dremel 9911 Rotary Tool Bit
Dremel Rotary Tool Bit, 1/8 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal and Plastic, 35000 rpm Maximum, For Shaping, Smoothening and Grinding Dremel Rotary Tool Bit, 1/8 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal and Plastic, 35000 rpm Maximum, For Shaping, Smoothening and Grinding Dremel Rotary Tool Bit, 1/8 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal and Plastic, 35000 rpm Maximum, For Shaping, Smoothening and Grinding
Dremel 9902 Rotary Tool Bit Dremel EZ Lock EZ Lock Mandrel Dremel 9903 Rotary Tool Bit
Dremel Rotary Tool Bit, 3/32 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Stainless Steel, Hard Steel, Cast Iron, Ceramics, Non-Ferrous Soft Metal and Plastic, 35000 rpm Maximum, Cylinder Shape, For Shaping, Smoothening and Grinding One piece mandrel design simplifies the process of changing accessories and makes it easy to cut through a range of materials from metal to plastic. For use with exclusive EZ Lock Accessories. Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM.
Dremel EZ409 Cut-Off Wheel Dremel Saw-Max Type 1A Cut-Off Wheel Dremel 628-01 Drill Bit Set
Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447). Cuts a variety of ferrous and nonferrous materials. 3/4" cut depth. .05" wheel thickness. For use on SKU# 454.6933. Bits are made of high speed steel and used for drilling into soft materials. Includes: 1/32", 3/64" bits (use #483 collet), 1/16" bit (use #482 collet), 5/64", 3/32" bits (use #481 collet) and 7/64", 1/8" bits (use #480 collet).
Dremel 650 Router Bit Dremel 7134 Abrasive Wheel Point Dremel 7144 Wheel Point Bit
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM. High-speed cutter tipped with diamond particles tapered to a fine point for detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel. High-speed cutter tipped with diamond particles tapered to a bullet point for fine detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel.
Dremel 117 Rotary Tool Bit Dremel 125 Rotary Tool Bit Dremel 192 High Speed Cutter
Dremel Rotary Tool Bit, 1/4 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, Nose Cone Point, Round Shape, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes Dremel Rotary Tool Bit, 1/4 in Diameter, 1/8 in Shank Diameter, HSS Cutting Edge, Applicable Materials: Wood, Plastic and Soft Metal, 25000 - 30000 rpm Maximum, For Shaping, Hollowing, Grooving, Slotting, Inlaying and Making Tapered Holes High speed versatile, carving and engraving cutter. Made of high quality steel for use on wood, plastic and soft metals. Ideal for shaping, hollowing, grooving, slotting and inlaying. Appropriate for curved surfaces. Bit diameter: 3/16" (4.8mm).
Dremel 615 Round Router Bit Dremel EZ476 Cut-Off Wheel Dremel EZ Lock Grinding Wheel
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. For cutting plastics. Compatible with all Dremel rotary tools. Pull-twist-release accessory changes. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Designed to flush-grind a surface. Domed shape and extra-thick reinforced aluminum oxide material allows the grinding wheel to be used on either its side or face for surface grinding, shaping, smoothing, deburring, rust removal sharpening, and flush-grinding. Applications include extended general-purpose grinding on metals, castings, welded joints, rivets and rust.  Use with either EZ402 (SKU #482.4447).
Dremel 9901 High Speed Cutter Dremel 570 Grout Removal Bit Dremel 7103 Rotary Tool Bit
Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM. Solid carbide bit removes wall and floor grout 3/8" below the face surface. Compatible with 275, 285, 395, 381, 398, and 380. Dremel Rotary Tool Bit, 5/64 in Diameter, 1/8 in Shank Diameter, Diamond Cutting Edge, Applicable Materials: Wood, Jade, Ceramics, Glass, Hard Steel and Semi-Precious Stones, 25000 rpm Maximum, Ball, Cone-CC Shape
Dremel 569 Grout Removal Bit Dremel EZ456 Cut-Off Wheel Dremel Saw-Max Type 1A Cut-Off Wheel
Solid carbide bit removes wall and floor grout 3/8" below the face surface. Compatible with 275, 285, 395, 381, 398, and 380. One piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal. Cut off wheels labeled for easy identification. Compatible with all Dremel rotary tools . Cuts a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933.
Dremel 4486 Keyless Chuck Dremel 9933 Rotary Tool Bit Dremel 9936 Rotary Tool Bit
Allows you to quickly and easily change accessory bits on  rotary tools 9.6V without changing collets. Accepts all accessory bits with 1/32" to 1/8" shanks. Dremel Rotary Tool Bit, 5/16 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Fiberglass, Wood, Plastic, Epoxy, Rubber, Laminates, Particleboard and Ceramic Tile, 35000 rpm Maximum, Cylinder Shape Dremel Rotary Tool Bit, 3/4 in Diameter, 1/8 in Shank Diameter, Tungsten Carbide Cutting Edge, Applicable Materials: Fiberglass, Wood, Plastic, Epoxy, Rubber, Laminates, Particleboard and Ceramic Tile, 35000 rpm Maximum
Dremel 7105 Rotary Tool Bit Dremel 7120 Rotary Tool Bit Dremel 7123 Rotary Tool Bit
Dremel Rotary Tool Bit, 11/64 in Diameter, 1/8 in Shank Diameter, Diamond Cutting Edge, Applicable Materials: Wood, Jade, Ceramics, Glass, Hard Steel and Semi-Precious Stones, 25000 rpm Maximum, Ball Shape Dremel Rotary Tool Bit, 16/64 in Diameter, 1/8 in Shank Diameter, Diamond Cutting Edge, Applicable Materials: Wood, Jade, Ceramics, Glass and Hard Steel, 25000 rpm Maximum, Knifedge Shape Dremel Rotary Tool Bit, 3/16 in Diameter, 1/8 in Shank Diameter, Diamond Cutting Edge, Applicable Materials: Wood, Jade, Ceramics, Glass, Hard Steel and Semi-Precious Stones, 25000 rpm Maximum, Cylinder Shape
Dremel 9931 High Speed Cutter Dremel 562 Tile Cutting Bit Black & Decker RT1022 Rotary Tool Accessory Kit
Fast cutting, structured tooth-tape, for greater material removal on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. High-speed cutter shapes ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes or create decorative wall tile by cutting a design. Universal system works on all rotary tools, including RTX and Wizard. Grinds, shapes and smooths most materials. Engraves most materials. Cuts nails, screws, bolts, chain, wire, pipe and closet maid shelving.
Dremel SM540 Circular Saw Blade Dremel 688-01 Cut-Off Wheel Assortment POINT SET DIAMOND 20PC 1/8INCH
Cuts most tiles and masonry materials such as wall tile, floor tile, porcelain, slate, stone and cement backer board. 3/4" cut depth. .075 wheel thickness. For use on SKU# 454.6933. Dremel Cut-Off Wheel Assortment, 69 Pieces, Includes: (36) 15/16 in Emery Cut Off Wheels-DRE409, (24) 15/16 in Heavy Duty Cut Off Wheels-DRE420, (5) 1-1/4 in Cut Off Wheels-DRE540, (3) 1-1/4 in Fiberglass Reinforced Cut Off Wheels-DRE426 and (1) Mandrel With Screw-DRE402, Reusable Storage Box, Application and Material Usage Information, Black 20 piece set with assorted shapes and sizes of nickel bonded diamond points. 1/8" (3.18mm) shank. Excellent for deburring, etching and smoothing of glass, plastic, ceramics and metals. Max rpm: 30,000.
Dremel A679-02 Sharpening Kit Bosch 687-01 Rotary Tool Bit Set Dremel EZ Lock Mandrel Starter Kit
Guides help restore edge on garden tools, sharpens all lawn mower blades and sharpens dull, slow-cutting chain saw blades. Includes garden tool, lawn mower and chain saw sharpening attachment, gauge, spacers, wrench, (4) sharpening stones and instruction manual. Fits tool models 4000, 3000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 780, 770, and 7700. Set contains: mandrel, (2) 1/2" felt polishing wheel, high-speed cutter, 1-1/4" fiberglass-reinforced cut-off wheel, aluminum oxide grinding stone, silicon carbide grinding stone, mandrel, nylon brush, (36) 409 15/16" emery cut-off wheel, 1/2" drum sander, 1/2" coarse sanding band, polishing compound, (2) 1/2" fine sanding band, (2) 1" felt polishing wheel and storage box. Applications: cutting, grinding, carving, engraving, shaping, sanding, cleaning and polishing.. For cutting metal.  One-piece mandrel design simplifies process of changing cutting wheels, eliminates the need for screw and screwdriver. Effortless locking and loading, no tiny mandrel to lose. Compatible with all Dremel rotary tools. Includes No.EZ402 Mandrel and (5) No.EZ456 cutting wheels. Color code red. Do not run in excess of 35,000 RPM.
Bosch EZ407SA  Oscillating Tool Accessories Dremel 543 Cutting Wheel Dremel Saw-Max Dome Shaped Type 27A Flush Cut Wheel
The EZ drum mandrel makes sanding band changes easy; just pull, place and secure. The one-piece mandrel design simplifies the process of changing bands and makes it easy to sand flat surfaces and edges. Provides a quicker and easier alternative to using a traditional sanding mandrel. Allows for flat sanding and edge sanding. Compatible with all Dremel rotary tools. Compatible with all Dremel 1/2" sanding bands. Bit diameter 12.7 mm. For use all dremel tools. Powerful shaping tool that quickly and efficiently removes material. Easily creates compound curves and works on a variety of materials including woods, fiberglass, laminates, plastic and leather.o.Cuts and finishes in one operation. Use the edge of the wheel for cutting and slotting. Use the "face" of the wheel for shaping. Cuts 33 percent deeper than former cutting/shaping wheels up to 1/2". DO NOT USE ON METAL For making flush cuts on a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. Dome-shaped. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933.
Dremel EZ544 Cut-Off Wheel Dremel 545 Abrasive Wheel Dremel 709-01 Super Accessory Kit
Use to cut 1/2" wood and laminate. Pull-twist-release accessory change. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Long lasting, does not break, will not lose it's shape. Coated with fine diamond particles, smooth fine cut. Hole design to minimize heat buildup. Applications: cutting, sawing, carving, sharpening and filing hard materials including marble, concrete, brick, porcelain, ceramics, hard epoxy, soft and hard wood. Includes: No. 402 mandrel. Versatile and reusable accessory kit includes everything you need to cut, grind, sand, polish, drill, sharpen and clean. Includes:  1-1/4" cut off wheel, 3/4" carbon steel brush, polishing compound, (4)-four-1" felt polishing wheel, silicon carbide grinding stone, high speed cutter, 1/2"/60 grit sanding drum with mandrel, 1/4"/60 grit sanding band with mandrel, mandrel, wrench, aluminum oxide grinding stone, silicon carbide grinding stone, aluminum oxide grinding stone, (12)-twelve-15/16" emery cut off wheel, (12)-twelve-15/16" heavy duty emery .-cut off wheel, 1-1/4" fiberglass reinforced cut off wheel, (4)-four-small felt wheel, cone polishing tip, (6)-six-1/2"/60 grit sanding band, (12)-twelve- 3/4" 180 grit sanding disc, (12)-twelve- 3/4"/220 grit sanding disc, (12)-twelve- 3/4"/.240 grit sanding disc, (6)-six-1/4"/60 grit sanding band, (6)-six-1/2"/120 grit sanding band, (6)-six- 1/4"/ 120 grit sanding band, mandrel, dressing stone, bristle brush and 180 grit abrasive buff.
Dremel 565 Cutting Guide Kit Dremel A577 Rotary Detailers Grip Attachment Kit Dremel 755-01 MiniMite Battery Pack
Provides controlled cuts in a variety of materials. Depth adjustment sets correct cutting depth up to 3/4". Easy screw-on mounting and large window provides excellent visibility. Specs: fits tool models 400, 398, 395, 300, 285, 275, 200, 100, 800 and 780. Includes: multipurpose cutting guide attachment, (2) drywall cutting bits, (1) multi purpose cutting bit and instructions. Offers enhanced grip and comfort for detailed applications. Provides optimal tool control when precision is required. Repositions the weight of the tool into the palm of your hand for a balanced feel and less fatigue. Attaches onto a rotary tool in place of its nose piece for quick and easy installation. Includes detailer's grip attachment, engraving cutter, tracing stencil and instructions. Dremel MiniMite Battery Pack, Suitable For Use With: Dremel 750-02 4.8 V MiniMite Cordless Rotary Tool, Nickel Cadmium Battery, Plastic, Black
Dremel 196 High Speed Cutter Dremel 9929 Engraving Point Dremel 426B Reinforced Cut-Off Wheel
A versatile, high quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. Appropriate for curved surfaces. 7/32" bit diameter (5.6 mm). Use this point for continuous duty or commercial work. Can also be used for decorative engraving. Use on steel, chrome, titanium, granite, and other hard substrates. Use with Dremel 290 (619.9319) engraver. Dremel Cut-Off Wheel, Reinforced, 1-1/4 in Diameter, 0.045 in Thickness, 1/8 in Arbor/Shank, Fiberglass Abrasive, 30000 rpm Maximum, Silver, Applicable Materials: Thin Wood, Plastics and Ceramics, 0.045 in Kerf, For Cutting, Grooving and Trimming All Kinds of Metal
General Tools 505 Cordless Precision Engraver WHEEL EZ LOCK PREMIUM 1-1/2IN Bosch 1550 Wood Burning Tool
General Tools Cordless Precision Engraver, 20000 rpm, AAA Battery, Alkaline Battery, Aluminum, For Labeling Tools, Sporting Goods, Toys, Jewelry and Other Valuables Cutting wheel features a super abrasive grit called cubic boron nitride or CBN. CBN used on a cut-off wheel allows the wheel to remain sharp longer, stay cool and it won't shrink; wheels have constant diameter during use for a full range depth of cut. Lasts at least 20 times longer than our fiberglass reinforced cutting wheels based on internal testing. In addition, with the Dremel premium metal cutting wheel you'll spend less time changing wheels. Saves space storing replacement wheels and saves money buying replacement wheels. 35000 rpm. For use with the EZ402 EZ Lock Mandrel that makes accessory changes as easy as Pull - Twist - Release. 1-1/2" diameter; Kerf: 0.041". Blade Thickness: .40 Features a high-efficiency bronze core heating element that heats quickly with a maximum tip temperature of 1,050 degrees F for burning and soldering capabilities. Tool stand protects tool from marking work surface. Ergonomic, stay cool design for control and comfort and a short shaft length for control of tip. Specs: 110/120 V/AC, watts 30/W, weighs 2.5 ozs. Includes: multipurpose tool, tool stand, convenient tip storage tube, general purpose tip, script tip, cutting tip, hot knife tip, soldering tip.
Dremel EZ456B Cut-Off Wheel Dremel EZ Lock Mini Polishing/Sanding Kit Dremel EZ Lock Mini Cutting Kit
Use to cut through metal. Pull-twist-release accessory change. Compatible with all Dremel rotary tools. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Includes (3) 180, 280, & 320 grit abrasive buffs, (2) 36 & 120 grit detail abrasive wheels, (1) cloth polishing wheel and polishing compound. Includes (4) 1-1/2" metal-cutting wheels, (3) 1-1/2" thin-cut wheels and (3) 1-1/2" plastic cutting-wheels. Use with either EZ402 (SKU #482.4447).
Dremel EZ Lock Abrasive Wheel Dremel 662DR Core Glass Drilling Bit KIT ROTARY ASSY DREMEL 130PC
Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447). For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions. Inside this accessory set are assorted bits for cutting, carving, engraving, grinding, drilling, sharpening, sanding, cleaning and polishing. The kit consists of regular cut off wheels, sanding bands, sandpaper discs, felt polishing wheels, carbon steel brush, aluminum oxide grinding stones, silicon carbide grinding stones, dressing stone, mandrels, wrench and a re-usable storage case.
Dremel 663DR Core Glass Drilling Bit Dremel 194 High Speed Cutter KIT EZ SANDING/GRINDING DREMEL
For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions. A versatile, high-quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. 1/8" bit diameter (3.2 mm). Sharpen lawn tools, remove rust, sand a sticker, engrave glass, plus more. Contains 31 genuine Dremel accessories for most every sanding, smoothing, shaping or grinding need. Includes a reusable storage box with removable organizer tray. Kerf: 0.05"; Blade thickness: 0.05"; Grit: 60, 120, 180 and 220. Color code: Blue.
Dremel 290 Electric Engraver Kit Dremel 568 Grout Removal Kit Dremel 575 Right Angle Attachment
Stroke adjustment dial regulates engraving depth from fine lines to deep grooves. Replaceable carbide points lets you engrave on most surfaces. Soft grip adds extra comfort and control. Letter/number template helps etch words and numbers. Light and compact design provides comfortable use for precision engraving performance. Amperage: 0.2; Hertz: 60; Speed: 7,200 (spm). Includes Engraver tool, Letter/number template and 9924 Carbide point. Attachments unique shape keeps the bit at the perfect cutting angle and keeps the cutting bit centered between the tiles, 30 degree cutting angle provides controlled cutting along the grout line. Special guides keep the bit centered between tiles. Large window for cut line visibility. Depth adjustment controls cutting depth up to 3/8" below the tile surface. Removes both wall and floor grout. Includes: grout removal attachment, 1/16" carbide grout removal bit and instructions. Coupling system allows you to rotate the attachment on your tool making hard to reach areas instantly accessible with the Right Angle Attachment. Specs: ball bearings and spiral bevel gears, quick connect system no tools required, compact, long-lasting and versatile. Fits tool models 400, 398, 395, 300, 285, 275, 800 and 780. Includes: right angle attachment and instructions.
Dremel Multipro Flexible Shaft KIT ACCESSORY ALL/PURP 160PC  Dremel 670-01 Mini Saw Attachment
The flexible, 36" shaft attaches easily, new 5" bend radius provides more flexibility during use. Specs: comfort grip hand piece, integrated shaft lock button, Quick connect, accepts up to 1/8" shank accessories, works with collet system and the dremel chuck. Fits tool models 400, 398, 395, 300, 285, 275 and 800. Includes: flex shaft attachment, square drive nut and instructions Comes with re-usable storage case and 160 accessories. Lift out trays for easy organization of the included bits. This kit is ready for cutting, grinding, polishing, sanding, cleaning and more. The kit also includes sanding bands, sandpaper discs, polishing compound, felt polishing wheels, aluminum oxide grinding stone, silicone carbide grinding stone, mandrels, wire brush and wrench. A complete start-up kit offering a breadth of accessories helpful for a wide assortment of tasks. Attaches to the rotary tool in seconds with Quick Connect System. Specs: makes clean, straight perpendicular cuts up to 1/4" thick, angled throat allows for straight, perpendicular cuts, clear housing for better visibility, directional guide and lower guard retracts when not in use. Includes: mini saw attachment, rip/crosscut blade, drive adapter and instruction manual.
Dremel 231 Large Shaper/Router Table Dremel 220-01 Drill Press ROTARY TOOL VARIBLE SPEED
Dremel 220-01 Drill Press
Our Price: $49.99
ROTARY TOOL VARIBLE SPEED
Our Price: $119.99
Dremel Shaper/Router Table, Large, 8 X 6 in, Includes: Shaper/Router Table, Instruction Sheet Drill press, tool holder and flex shaft holder all in one, drills accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches. Specs: base 56 square inches, drill depth 2 inches, fits tool models 275, 285, 300, 395, 398, 400, 780 & 800. Includes: work station attachment, mounting wrench and instructions. Allows tool-less and collet-less accessory changes with the inclusion of the three jaw chuck. The chuck accepts all Dremel accessory shank sizes for fast and convenient accessory changes without ever using a wrench. Featuring the all new Pivot Light, your projects are will lit with an optimum line of sight since the light pivots to direct illumination where you want it. Variable speed and electronic feedback circuitry. The slim, ergonomic body design provides a comfortable 360 degree grip zone no matter how you hold it for extended ease of use. The completely redesigned air flow system lets the Dremel 4300 run cool, quiet and smooth so completing projects are more enjoyable than ever. 6' cord. Variable speed: 5,000 - 35,000 rpm.
   
 
1