Home > FARM & RANCH > BEEKEEPING SUPPLIES
Choose a sub category:
BEE HIVES BEE FEEDERS BEEKEEPING TOOLS
BEEKEEPING APPAREL

Harvest Lane Beekeeping Gear & Equipment

If you’re new to beekeeping, it’s important to have a one-stop shop for all the necessary gear and equipment to safely manage and grow your hive. The Village Mercantile is that one-stop shop! We carry a full selection of Harvest Lane beekeeping supplies, including Harvest Lane beehive kits, storage supplies, protective gear and more so you can customize your beekeeping setup to your needs. We trust Harvest Lane for their product quality, variety and dependability, making them the only brand we carry.

Whether you’re starting a new hobby or running a small beekeeping business, shop for your Harvest Lane apiary supplies with The Village Mercantile and rest easy knowing you’re getting a quality product at a competitive price. Be sure to contact us or stop by our Corrales, NM, storefront with questions!

Sort By:
1
BEEHIVE ENTRANCE REDUCER      PELLETS SMOKER BEE 1 POUND    FRAMES/FOUNDATION DEEP
Fits the 10 Frame Langstroth hives and seamlessly integrate with all Harvest Lane Honey bottom boards. With a small and medium gap, the reducer can be used to completely close off your hive for transport or as a protection from pesticide spraying. Reducers are also used to reduce the entrance of a hive during new package introduction or to prevent the hive from having to much cold air during winter. Standard usage is one reducer per hive. Built from sturdy, food-grade plastic to make it resistant to wax moths and for easy acceptance in the hive. It features a text a textured cell pattern and 100% beeswax coating. Made in the USA of food grade plastic. Use with 9-1/8" Deep Brood Foundations with Groove Tops and Groove Bottoms and 9-1/2" Deep Brood Boxes.
FRAMES/FOUNDATION MEDIUM      HONEY SCRATCHER/COMB UNCAPPING HIVE TOOL 9-1/2IN STEEL PRYBAR
Resistant to wax moths, long lasting and durable with textured cell pattern; 100% bees was coating. Made in the USA of food grade plastic. Usage: use with 6-1/4" Medium Honey Super and 6-1/4" Frames with Groove Tops and Groove Bottoms. A plastic angled shaft with steel tines used to puncture capped honey prior to extraction; it allows you to open cells that an ordinary uncapping knife won't reach. Made of steel with a pry and crow bar; it's instrumental in prying open your hive; separating frames from the hive and scraping off excess and wild comb.
POLLEN PATTIE FEED SUPLMNT 1LB EXCLUDER QUEEN BEE PLASTIC    BEE BRUSH SOFT BRISTLE WD HNDL
Contains 4% pollen to sustain your new or existing hive. Recommend that you feed in the spring, fall and winter by placing the unwrapped Pollen Pattie directly onto the frames. Use with 10 Frame Langstroth hives; place the Queen Excluder between honey and brood chambers to prevent the queen from laying eggs in honey; the excluder will also allow you to find the queen easily on hive inspections. Do not add until the brood is established. Helps you sweep bees away from your hive and gently remove bees from un-wanted spaces.
JAR HONEY BEAR 8OZ EMPTY 6PACK FRAME GRIPS BEEHIVE INDUSTRY  EXCLUDER QUEEN BEE METAL
Ideal for serving, storage and gift giving; they feature an easy squeeze topper with cap and are made from unbreakable crystal clear plastic. Used to help pull frames from the hive without crushing bees. Use with 10 Frame Langstroth hives; place the Queen Excluder between honey and brood chambers to prevent the queen from laying eggs in honey; the excluder will also allow you to find the queen easily on hive inspections. Do not add until the brood is established.
BEE ENTRANCE FEEDER W/QT JAR  BEE FEEDER IN HIVE W/CAPLADDER APRON HONEY BEEKEEPER EX-LONG
Ideal for feeding bees in Langstroth Top Bar or other non-traditional hives; use outside the hive to refuel your hive; simply fill and attach a standard canning jar for effortless external feeding. Not ideal for colder climates. Ideal for feeding bees in Langstroth Top Bar or other non-traditional hives; use outside the hive to refuel your hive; simply fill and attach a standard canning jar for effortless external feeding. Not ideal for colder climates. Protect your clothing while extracting honey; made extra long with ties to fit most sizes.
BEEHIVE MEDIUM BOX UNASSEMBLED BEEKEEPER GARDEN VEIL W/STRING FRAME PERCH REST BEEHIVE
Should be used as your Honey Supers or add to your hive until you are ready to extract honey. Based on the 6-7/8" 10 Frame Langstroth and made from USA Ponderosa Pine with minimal knots, grade 2 or better, this box works with any Langstroth hive. Handle grips on four sides facilitate easy handling. Frame rest lip included. Recommend assembly shortly after delivery to ensure product quality. Measurements: 16-1/4" x 19-7/8" x 6-7/8". Assembly required and assembly instructions enclosed. Made of cotton/poly with mesh and drawstring tie at the neck; use as a protective face covering when working with bees or wanting to keep bugs out of your face while in the yard. Fits all sizes. Collapses nicely for easy storage. Easily mounts to the side of beehive boxes for holding your frames as you inspect your hive.
BEEHIVE INNER COVER WD W/HOLE BEEKEEPER GLOVES XS GOATSKIN  BEEKEEPER GLOVE XXL GOATSKIN
Moisture resistant and used as a protective cover over the hive to provide extra insulation; ideal for use with standard 10 Frame Langstroth Beehives; can also prevent the hive's top from sticking to the boxes to prolong the life of your equipment; when used with a bee escape or cone, it will help the beekeeper remove bees from the hive during honey harvest. Standard usage is one inner cover per hive. Protect your hands while working with bees using these heavy-duty goatskin bee gloves; a canvas upper with mesh inserts for venting and goat leather protection for your hands provide the comfort and dexterity you need when handling the various jobs of beekeeping. Protect your hands while working with bees using these heavy-duty goatskin bee gloves; a canvas upper with mesh inserts for venting and goat leather protection for your hands provide the comfort and dexterity you need when handling the various jobs of beekeeping.
BEEHIVE BOTTOM BOARD SOLID    BEE FEED LIQUID 1 GALLON      GLOVE BEEKEEPING ADULT SMALL
Designed to fit 10 Frame Langstroth hives and lasts for up to 20 years; spacing on the bottom allows for strapping your hive for transport or wind protection; standard usage is one Bottom Board per hive to be used as a base for your boxes. Includes Honey B feeding stimulant, feed to bees during the spring, winter and nector dearths; remove during honey flow; HLH Bee feed does not separate; it is pre-mixed and ready to pour into any feeder; made up of only certified ingredients; Honey B Healthy aids in over wintering survival; if you notice robbing, switch to an inhive feeder. Protect your hands while working with bees using these heavy-duty goatskin bee gloves; a canvas upper with mesh inserts for venting and goat leather protection for your hands provide the comfort and dexterity you need when handling the various jobs of beekeeping.
GLOVE BEEKEEPING ADULT MEDIUM GLOVE BEEKEEPING ADULT LARGE  GLOVE BEEKEEPING ADULT X-LARGE
Protect your hands while working with bees using these heavy-duty goatskin bee gloves; a canvas upper with mesh inserts for venting and goat leather protection for your hands provide the comfort and dexterity you need when handling the various jobs of beekeeping. Protect your hands while working with bees using these heavy-duty goatskin bee gloves; a canvas upper with mesh inserts for venting and goat leather protection for your hands provide the comfort and dexterity you need when handling the various jobs of beekeeping. Protect your hands while working with bees using these heavy-duty goatskin bee gloves; a canvas upper with mesh inserts for venting and goat leather protection for your hands provide the comfort and dexterity you need when handling the various jobs of beekeeping.
BEEHIVE DEEP BOX UNASSEMBLED  UNCAPPING KNIFE ANGLED COLD   BEE SMOKER STANDARD MEDIUM SS
Ideal for use as Brood chambers in your hive. Standard use is (2) Brood Chambers per hive. Based on the Langstroth ten-frame design with standard 9-1/2" frames made from USA Ponderosa Pine with minimal knots, grade 2 or better, this box works with any Langstroth hive. Handle grips on four sides facilitate easy handling. Frame rest included. Recommend assembly shortly after delivery to ensure product quality. Measurements: 16-1/4" x 19-7/8" x 9-1/2". Assembly required and assembly instructions are enclosed. Commonly known as a cold knife, since it is not heated, the Honey Uncapping knife features serrated sides and an angled handle with wooden grip to help you expertly cut cappings off of honey before extraction. Smoking your hive makes managing the bees inside easier; use to help soothe the colony, relax your hive and prevent aggressive bees. Includes a heat shield and side hook with leather bellows (sometimes referred to as 4X7). Recommend adding 1 Tablespoon of smoker pellets to the bottom of the smoker for each use.
BEEHIVE BOTTOM BOARD SCREEN   BUCKET HONEY WITH GATE 5GALLON HONEY SIEVE DOUBLESCREEN METAL
Used to provide ventilation to the hive; the screened bottom board features a sliding solid bottom that allows the beekeeper to control the amount of ventilation without having to disturb the hive; consists of a 45-degree slanted front landing board with the bottom board and solid constructed sides, along with a heavy-gauge galvanized steel mesh screened center and a solid sliding bottom for long-term use. Includes a honey gate on the front; bucket will easy hold and distribute honey with minimal mess. Used to screen particles, wax and other impurities from harvested honey after extraction; features fully adjustable sides to fit over most buckets and containers.
BEEHIVE TOP FLAT GALV STEEL   BEEHIVE TOP PITCHED GALV STEEL BEEHIVE BOX MED W/FRAME FOUND
Constructed of galvanized steel stop a wooden base designed to fit across a standard 10 frame Langstroth Hive and includes a drip edge to protect against the weather and pests; engineered and designed to withstand pressure over 2500 lbs. Standard use: one top per hive. Constructed of galvanized steel stop a wooden base designed to fit across a standard 10 frame Langstroth Hive and includes a drip edge to protect against the weather and pests; engineered and designed to withstand pressure over 2500 lbs. Standard use: one top per hive. Built from Ponderosa Pine and painted with two coats of white exterior latex paint, the box is ready to use as brood chambers in your Standard 6 7/8" 10 Frame Langstroth hive or as honey supers as your hive builds up. Standard use is to continue to add honey supers until you are ready to extract. Based on the standard 10 Frame Langstroth design with handle grips on 4 sides for easy handling and frame rest lip included. This product is intended for use with Medium Honey 6-14" frames and 5-5/8" foundations. The plastic foundation has a beeswax coating. Measurements: 16-1/4" x 19-7/8" x 6-7/8". NO assembly required. It comes fully assembled. Made In The USA.
BEEKEEPER JACKET SMALL W/HOOD BEEKEEPER JACKET MEDIUM W/HOOD BEEKEEPER JACKET LARGE W/HOOD
The hooded bee jacket is a quick way to use protective clothing to allow you to inspect your hive and collect honey without the sting; stretch elastic and covered zippers keep you protected and the full mesh hood is structured to keep the mesh and bees comfortably away from your face. The hooded bee jacket is a quick way to use protective clothing to allow you to inspect your hive and collect honey without the sting; stretch elastic and covered zippers keep you protected and the full mesh hood is structured to keep the mesh and bees comfortably away from your face. The hooded bee jacket is a quick way to use protective clothing to allow you to inspect your hive and collect honey without the sting; stretch elastic and covered zippers keep you protected and the full mesh hood is structured to keep the mesh and bees comfortably away from your face.
BEEKEEPER JACKET XLRG W/HOOD  BEEKEEPER JACKET XXL WITH HOOD BEEHIVE BOX DEEP BROOD W/FRAME
The hooded bee jacket is a quick way to use protective clothing to allow you to inspect your hive and collect honey without the sting; stretch elastic and covered zippers keep you protected and the full mesh hood is structured to keep the mesh and bees comfortably away from your face. The hooded bee jacket is a quick way to use protective clothing to allow you to inspect your hive and collect honey without the sting; stretch elastic and covered zippers keep you protected and the full mesh hood is structured to keep the mesh and bees comfortably away from your face. This kit includes an assembled and painted USA Ponderrosa Pine Deep Broad bee box , as well as (10) 9-1/2" assembled and waxed Deep Honey frames with sturdy plastic foundations. Milled and assembled in the USA, the box is fully painted, then quality inspected to ensure a long lasting hive. Designed to work with all 10 Frame Langstroth design hives. Recommend (2) Deep Brood boxes while starting a hive. Measurements: 16-14" x 19-7/8" x 9-1/2".
BEE HIVE STAND W/FRAME REST   BEE SUIT FULL SMALL W/HOOD BEE SUIT FULL MEDIUM W/HOOD
Use to raise any standard Langstroth hive off the ground to prevent water damage and hive invasions. Standard use: one protective hive stand per hive. The hooded bee suit allows beekeepers to collect honey without the sting; stretch elastic and covered zippers keep you protected while you reap the rewards of your hive; the full mesh hood is structured to be breathable and keep bees away from your face; side zippers on the ankles allow you to easily put your suit on over clothing and shoes. Care: Machine wash delicate, air dry. The hooded bee suit allows beekeepers to collect honey without the sting; stretch elastic and covered zippers keep you protected while you reap the rewards of your hive; the full mesh hood is structured to be breathable and keep bees away from your face; side zippers on the ankles allow you to easily put your suit on over clothing and shoes. Care: Machine wash delicate, air dry.
BEE SUIT FULL LARGE W/HOOD    BEE SUIT FULL X-LARGE W/HOOD  BEEKEEPER SUIT ADULT XXL HOOD
The hooded bee suit allows beekeepers to collect honey without the sting; stretch elastic and covered zippers keep you protected while you reap the rewards of your hive; the full mesh hood is structured to be breathable and keep bees away from your face; side zippers on the ankles allow you to easily put your suit on over clothing and shoes. Care: Machine wash delicate, air dry. The hooded bee suit allows beekeepers to collect honey without the sting; stretch elastic and covered zippers keep you protected while you reap the rewards of your hive; the full mesh hood is structured to be breathable and keep bees away from your face; side zippers on the ankles allow you to easily put your suit on over clothing and shoes. Care: Machine wash delicate, air dry. The hooded bee suit allows beekeepers to collect honey without the sting; stretch elastic and covered zippers keep you protected while you reap the rewards of your hive; the full mesh hood is structured to be breathable and keep bees away from your face; side zippers on the ankles allow you to easily put your suit on over clothing and shoes. Care: Machine wash delicate, air dry.
BEEKEEPING KIT SM W/ACC ONLY  HONEY EXTRACTOR METAL 2-FRAME
Includes: Outer cover, Inner cover, (1) deep hive body, (1) deep frames with plastic foundation, (1) Bottom board, (1) Entrance reducer, (1) In-hive feeder, (1) 3x6 smoker, 1lb. bag of smoker fuel, (1) 9.5" steel hive tool and (1) bee brush. Made from easy to care for food grade stainless steel and sturdy components. With a sturdy stand and hand crank system that can be used in reverse and a honey gate in the front to allow honey to remain contained or flow when you want it, this extractor is designe for use with two or four standard size frames and can be set up anywhere. Recommend extracting honey indoors and away from hives.
   
 
1